Temperature dependence of the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate in aqueous solution

Many applications of ionic liquids (ILs) are closely related with their microstructure in mixtures. For example, morphology and pore size of the MCM-41 prepared in aqueous ILs are greatly dependent on the aggregation behavior of the ILs in water. Therefore, the study on the microstructure of ILs in aqueous solutions is of great importance. In this work, ¹H NMR, dynamic light scattering and attenuated total reflection infrared spectroscopy have been used to investigate the temperature effect on the structures of aqueous 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) solutions. It was shown that the size of the IL aggregates becomes larger with decreasing temperature. When the system temperature is below the upper critical solution temperature (UCST) of the binary mixture at about 4 °C, the aggregate size of the IL is larger than 1000 nm. Additionally, the two-dimensional IR results reveal that at low IL concentrations, H₂O can interact with [BF₄]⁻ prior to the CH groups of the imidazolium ring, whereas cation and anion of the IL tend to form aggregate at high IL concentrations. With the decrease of temperature, the interactions between cation and anion of the IL become stronger, but those between the IL and water become weaker, thereby resulting in the growth of the aggregate of cation with anion of the IL. This result may give a reasonable explanation for the origin of the UCST behavior of aqueous [C₄mim][BF₄] solution.     

On-Surface Metathesis of an Ionic Liquid on Ag(111)

We investigated the adsorption, surface enrichment, ion exchange, and on-surface metathesis of ultrathin mixed IL films on Ag(111). We stepwise deposited 0.5 ML of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) and 1.0 ML of the aprotic IL 1-methyl-3-octylimidazolium hexafluorophosphate ([C₈C₁Im][PF₆]) at around 90 K. Thereafter, the resulting layered frozen film was heated to 550 K, and the thermally induced phenomena were monitored in situ by angle-resolved X-ray photoelectron spectroscopy. Between 135 and 200 K, [TfO]⁻ anions at the Ag(111) surface are exchanged by [PF₆]⁻ anions and enriched together with [C₈C₁Im]⁺ cations at the IL/vacuum interface. Upon further heating, [dema][PF₆] and [OMIm][PF₆] desorb selectively at ∼235 and ∼380 K, respectively. Hereby, a wetting layer of pure [C₈C₁Im][TfO] is formed by on-surface metathesis at the IL/metal interface, which completely desorbs at ∼480 K. For comparison, ion enrichment at the vacuum/IL interface was also studied in macroscopic IL mixtures, where no influence of the solid support is expected.     

Temperature-Dependent Surface Enrichment Effects in Binary Mixtures of Fluorinated and Non-Fluorinated Ionic Liquids

Using angle-resolved X-ray photoelectron spectroscopy (ARXPS), we investigate the topmost nanometers of various binary ionic liquid (IL) mixtures at different temperatures in the liquid state. The mixtures consist of ILs with the same [PF₆]⁻ anion but two different cations, namely 3-methyl-1-(3,3,4,4,4-pentafluorobutyl)imidazolium hexafluorophosphate, [PFBMIm][PF₆], and 1-butyl-3-methylimidazolium hexafluorophosphate, [C₄C₁Im][PF₆], with 10, 25, 50 and 75 mol % content of [PFBMIm][PF₆]. We observe a preferential enrichment of the fluorinated chain in the topmost layer, relative to the bulk composition, which is most pronounced for the lowest content of [PFBMIm][PF₆]. Upon cooling the mixtures stepwise from 95 °C until surface charging effects in XPS indicate solidification, we observe a pronounced increase in surface enrichment of the fluorinated chain with decreasing temperature in the liquid state. In contrast to the mixtures with lower [PFBMIm][PF₆] contents, cooling the 75 mol % mixture additionally shows an abrupt decrease of the fluorinated chain signal before complete solidification occurs, which is assigned to partial precipitation effects.     

Study of the Alkyl Chain Length on Laccase Stability and Enzymatic Kinetic with Imidazolium Ionic Liquids

The activity and stability of laccase and their kinetic mechanisms in water soluble ionic liquids (ILs): 1-butyl-3-methyl imidazolium chloride [C₄mim][Cl], 1-octyl-3-methyl imidazolium chloride [C₈mim][Cl], and 1-decyl-3-methyl imidazolium chloride [C₁₀mim][Cl] were investigated. The results show that an IL concentration up to 10% is satisfactory for initial laccase activity at pH 9.0. The laccase stability was well maintained in [C₄mim][Cl] IL when compared to the control. The inactivation of laccase increases with the length of the alkyl chain in the IL: [C₁₀mim][Cl] > [C₈mim][Cl] > [C₄mim][Cl]. The kinetic studies in the presence of ABTS as substrate allowed calculating the Michaelis–Menten parameters. Among the ILs, [C₄mim][Cl] was the suitable choice attending to laccase activity and stability. Alkyl chains in the ions of ILs have a deactivating effect on laccase, which increases strongly with the length of the alkyl chain.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Investigation of the Role of Ionic Liquids in Tuning the p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Values of Some Anionic Indicators

The effect of imidazolium-based ionic liquids, ([C₁₂mim][Cl] and [C₈mim][Cl]), on the acid-base equilibria of two sulfonated indicators has been studied. The presence of ILs leads to decreased pK _a values because of the stronger electrostatic interaction of cationic ILs with the basic forms of the indicators with more negative charge. The longer alkyl side chain of [C₁₂mim][Cl] compared to [C₈mim][Cl] results in stronger hydrophobic interaction of this IL with the basic forms of the dyes leading to a more effective decrease in the pK _a values. Also, the transition points and transition intervals of the acid-base titration curves of the indicators were affected by the presence of ILs. It was found that the IL interaction with acid-base indicators also results in sharpening the acid-base titration curves of the indicators. From these observations, it is concluded that the presence of ILs can tune the pK _a values of indicators. All the experiments were performed spectrophotometrically and the results were obtained using curve fitting methods.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Effect of imidazolium-based ionic liquids on the aggregation behavior of twin-tailed cationic gemini surfactant in aqueous solution

Micellization behavior of the twin-tailed surfactants can be modulated by the addition of various modifiers. Ionic liquids (ILs) are one of them and are documented here. The beauty of these environmentally benign neoteric molecules lies in their structural versatility. Here, we have investigated the effect of three ILs: 1-butyl-3-methylimidazolium bromide ([C₄mim][Br]), 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]), and 1-octyl-3-methylimidazolium bromide ([C₈mim][Br]) on the aggregation and surface adsorption behavior of cationic gemini surfactant, bis(hexadecyldimethyl ammonium)propane dibromide (16-3-16) through experimentally measured electrical conductivities, surface tensions, and by spectral methods (UV-vis absorbance and fluorescence measurements). The main focus of the study is to observe the effect of added ILs on the critical micelle concentration (cmc), various surface parameters, aggregation number, and size of the aggregates of gemini surfactant. The results show that the more hydrophobic ILs, that is, [C₆mim][Br] and [C₈mim][Br] behave as electrolyte at lower concentration and cosurfactant at higher concentration, whereas moderately hydrophobic IL [C₄mim][Br] acts as an electrolyte at all concentration ranges studied. The modulating effects of ILs were also compared with conventional electrolyte (NaBr) at similar conditions.     

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 “Material Synthesis near Room Temperature”,which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO₃Me]⁻, served as starting material and enabled facile access to pseudohalide salts by reaction with Me₃Si−X (X=CN, N₃, OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu₃MeN][B(OMe)₃(CN)], we were able to crystallize the double salt [nBu₃MeN]₂[B(OMe)₃(CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)₂]⁻ and the temperature labile solvate anions [CN(HCN)_n]⁻ (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N₃, OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)₃] (X=N₃, OCN) and [PPN][SCN(HCN)₂] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)₂]⁻, crystallizing as HCN disolvate [PPN][P(CN⋅HCN)₂]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl_0.78(CN)_5.22]²⁻ and [SiF(CN)₅]²⁻ and the hexa-substituted [Si(CN)₆]²⁻ by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et₃HN]₂[Si(CN)₆] with MOH (M=Li, K), Li₂[Si(CN)₆] ⋅ 2 H₂O and K₂[Si(CN)₆] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M₂[Si(CN)₆] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]₂[Si(CN)₆]. When reacting [Mes(nBu)Im]₂[Si(CN)₆] with an excess of the strong Lewis acid B(C₆F₅)₃, the voluminous adduct anion {Si[CN⋅B(C₆F₅)₃]₆}²⁻ was obtained.     

n-Butane,iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [C_nC₁Im]X, where n=4, 8 and X⁻=Cl⁻, Br⁻, [PF₆]⁻ and [Tf₂N]⁻. The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Calorimetric Study on the Ion Pairing and Aggregation of 1-Ethyl-3-Methylimidazolium bis(trifluoromethylsulfonyl)amide ([C2mim][NTf2]) and Related Ionic Liquids in the Low-Dielectric Constant Solvent Chloroform

A calorimetric study of dissolution of the ionic liquids (ILs) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₂mim][NTf₂]), 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₆mim][NTf₂]), and 1-hexyl-3-methylimidazolium tris(trifluoromethylsulfonyl)methide ([C₆mim][CTf₃]) into chloroform (CHCl₃) is presented with particular focus on [C₂mim][NTf₂]. The interpretation of the calorimetric data for [C₂mim][NTf₂] was aided by additional NMR self-diffusion measurements and viscosity measurements that through the Stokes–Einstein equation provided information about the average size of the species present. It is evident that the main equilibrium species are ion pairs and aggregates. An estimate for the enthalpy contribution from aggregate formation for [C₂mim][NTf₂] was found to be ?2.09 kJ per mol of added IL at 288.2 K and slightly decreasing in magnitude to ?1.11 kJ·mol^?1 at 318.2 K. While all three ILs release heat upon dissolution into CHCl₃, different temperature trends are observed demonstrating the fine balance of competing contributions from breaking IL interactions, cavity formation for the solutes to reside in, and the establishment of new solute–solvent interactions.     

Extraction and high performance liquid chromatographic determination of 3-indole butyric acid in pea plants by using imidazolium-based ionic liquids as extractant

In this paper, imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] were tested as extracting solvents for removal of 3-indole butyric acid (IBA) from aqueous media with subsequent determination using HPLC. Percent extraction of IBA was strongly affected by pH of aqueous phases and the chemical structures of ionic liquids (ILs). Extraction of IBA was quantitative in the pH values lower than pK_a of IBA. Considering both extraction and stripping efficiencies of IBA, [C₄mim][PF₆] was found to act more efficient than other studied ILs. Capacity of [C₄mim][PF₆] was 17.6 × 10⁻⁴ mmol IBA per 1.0 mL of IL. Ionic strength of aqueous phase and temperature had shown no serious effects on extraction efficiency of IBA. A preconcentration factor of 100 and a relative standard deviation of 1.16% were obtained. It was found that ionic liquid phase was reusable almost five times for extraction/stripping purposes. 3-Indole acetic acid showed interferential effect in the extraction step. In order to assess the applicability of the method, extraction and stripping of IBA from pea plants and some other samples were studied.     

Temperature-Dependent Surface-Enrichment Effects of Imidazolium-Based Ionic Liquids

We present the first systematic study of the influence of temperature on the degree of surface enrichment of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs). Using angle-resolved X-ray photoelectron spectroscopy, we demonstrate that the degree of surface enrichment strongly decreases with increasing temperature for all the studied ILs. For ILs with the same cation, but different anions, [C₈C₁Im]Br, [C₈C₁Im][TfO] and [C₈C₁Im][Tf₂N], no significant differences of the temperature-induced partial loss of surface enrichment are found. Measurements for [C₄C₁Im][TfO], [C₈C₁Im][TfO] and [C₁₈C₁Im][TfO] indicate a small effect of the chain length. For [C₁₈C₁Im][TfO], a continuous decrease of alkyl surface enrichment is found with increasing temperature, with no abrupt changes at the phase-transition temperature from the smectic A to the isotropic phase, indicating that the surface enrichment is not affected by this phase transition.     

Highly Efficient Carbon Monoxide Capture by Carbanion-Functionalized Ionic Liquids through C-Site Interactions

A novel method for the highly efficient and reversible capture of CO in carbanion-functionalized ionic liquids (ILs) by a C-site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol⁻¹) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf₂N] (2×10⁻³ mol mol⁻¹). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C-site in the carbanion and CO resulted in the superior CO absorption capacities. Furthermore, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion-functionalized ILs provides a new way of separating and converting CO.     

Effects of Cationic Structure on Cellulose Dissolution in Ionic Liquids: A Molecular Dynamics Study

In recent years, great progress has been made in the dissolution of cellulose with ionic liquids (ILs). However, the mechanism of cellulose dissolution, especially the role the IL cation played in the dissolution process, has not been clearly understood. Herein, the mixtures of cellulose with a series of imidazolium‐based chloride ionic liquids and 1‐butyl‐3‐methyl pyridinium chloride ([C₄mpy]Cl) were simulated to study the effect that varying the heterocyclic structure and alkyl chain length of the IL cation has on the dissolution of cellulose. It was shown that the dissolution of cellulose in [C₄mpy]Cl is better than that in [C₄mim]Cl. For imidazolium‐based ILs, the shorter the alkyl chain is, the higher the solubility will be. In addition, an all‐atom force field for 1‐allyl‐3‐methyl imidazolium cation ([Amim]⁺) was developed, for the first time, to investigate the effect the electron‐withdrawing group within the alkyl chain of the IL cation has on the dissolution of cellulose. It was found that the interaction energy between [Amim]⁺ and cellulose was greater than that between [C₃mim]⁺ and cellulose, indicating that the presence of electron‐withdrawing group in alkyl chain of the cation enhanced the interaction between the cation and cellulose due to the increase of electronegativity of the cations. These findings are used to assess the cationic effect on the dissolution of cellulose in ILs. They are also expected to be important for rational design of novel ILs for efficient dissolution of cellulose.     

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C₃CNC₁Im][Tf₂N] and [C₁CNC₁Pip][Tf₂N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.     

Liquid–Liquid Equilibria for Extraction of Citrus Essential Oil Using Ionic Liquids

The object of this study was to measure the liquid–liquid equilibria (LLE) data of binary mixtures containing ionic liquids and citrus essential oil. We investigated linalool as the citrus essential oil, and 1-alkyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C _n MIM]⁺[TFSI]^?) as the ionic liquid. Firstly, the experimental apparatus and procedure for the LLE measurement of mixtures containing ionic liquids were verified by measuring the LLE of the binary mixture 1-hexyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C₆MIM]⁺[TFSI]^?) + 1-hexanol as a reference test system recommended by Marsh et al. (Pure Appl Chem 81:781–789, 2009). Next, the LLE data for IL + linalool were obtained, and the LLE data of two binary mixtures 1-butyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C₄MIM]⁺[TFSI]^?) or [C₆MIM]⁺[TFSI]^? + linalool were determined. The experimental LLE data were satisfactorily represented by the non-random two-liquid model.     

Pd0-Catalyzed Asymmetric Carbonitratation Reaction Featuring an H-Bonding-Driven Alkyl−PdII−ONO2 Reductive Elimination

Reductive elimination of alkyl−Pd^II−O is a synthetically useful yet underdeveloped elementary reaction. Here we report that the combination of an H-bonding donor [PyH][BF₄] and AgNO₃ additive under toluene/H₂O biphasic system can enable such elementary step to form alkyl nitrate. This results in the Pd⁰-catalyzed asymmetric carbonitratations of (Z)-1-iodo-1,6-dienes with (R)-BINAP as the chiral ligand, affording alkyl nitrates up to 96 % ee. Mechanistic studies disclose that the reaction consists of oxidative addition of Pd⁰ catalyst to vinyl iodide, anion ligand exchange between I⁻ and NO₃⁻, alkene insertion and S_N2-type alkyl−Pd^II−ONO₂ reductive elimination. Evidences suggest that H-bonding interaction of PyH⋅⋅⋅ONO₂ can facilitate dissociation of O₂NO⁻ ligand from the alkyl−Pd^II−ONO₂ species, thus enabling the challenging alkyl−Pd^II−ONO₂ reductive elimination to be feasible.