Laser induced breakdown spectroscopy of germane plasma induced by IR CO2 pulsed laser

Laser-induced breakdown spectroscopy (LIBS) in germane (GeH₄), initially at room temperature and pressures ranging from 2 to 10 kPa, was studied using a high-power transverse excitation atmospheric (TEA) CO₂ laser (λ=10.653 μm, τ _FWHM=64 ns and power densities ranging from 0.28 to 5.52 GW cm⁻²). The strong emission spectrum of the generated plasma is mainly due to electronic relaxation of excited Ge, H and ionic fragments Ge⁺, Ge²⁺ and Ge³⁺. The weak emission is due to molecular bands of H₂. Excitation temperatures of 8100±300 K and 23,500±2500 K were estimated by Ge atomic and Ge⁺ singly ionized lines, respectively. Electron number densities of the order of (0.7–6.2)×10¹⁷ cm⁻³ were deduced from the Stark broadening of several atomic Ge lines. The characteristics of the spectral emission intensities from different species have been investigated as functions of the germane pressure and laser irradiance. Optical breakdown threshold intensities in germane at 10.653 μm have been determined. The mechanism of initiation of the laser-induced plasma in germane has been analyzed.     

Synthesis, Characterization, DNA-Binding and Antiproliferative Activity of Nd(III) Complexes With N-(Nitrogen Heterocyclic) Norcantharidin Acylamide Acid

Three novel complexes [Nd(L)(NO₃)(H₂O)₂]·NO₃·2H₂O (HL¹ = N-pyrimidine norcantharidin acylamide acid, C₁₂H₁₃N₃O₄; HL² = N-pyridine norcantharidin acylamide acid, C₁₃H₁₄N₂O₄; HL³ = N-phenyl norcantharidin acylamide acid, C₁₄H₁₅NO₄) were synthesized. HL¹, HL² and HL³ are the ligand of complex(1), complex(2) and complex(3), respectively. Their structures were characterized by elemental analysis, conductivity measurement, infrared spectra and thermogravimetric analysis. The DNA-binding properties of the complexes have been investigated by fluorescence spectroscopy and viscosity measurements. The results suggest that the complexes can bind to DNA by partial intercalation. The liner Stern-Volmer quenching constant K_sq values are 3.3(±0.21)(1), 1.7(±0.19)(2) and 0.9(±0.04)(3), respectively. Complex (1) and (2) have been found to cleave pBR322 plasmid DNA at physiological pH and temperature. The test of antiproliferation activity indicates that complex(1) has strong antiproliferative ability against the SMMC7721 (IC₅₀ = 131.7 ± 23.4 μmol·L⁻¹) and A549 (IC₅₀ = 128.4 ± 19.9 μmol·L⁻¹) cell lines. The inhibition rates of complex(2) (IC₅₀ = 86.3 ± 11.3 μmol·L⁻¹) are much higher than that of NCTD (IC₅₀ = 115.5 ± 9.5 μmol·L⁻¹) and HL² (111.0 ± 5.7 μmol·L⁻¹) against SMMC7721 cell lines.     

PARAFAC Analysis of the Quenching of EEM of Fluorescence of Glutathione Capped CdTe Quantum Dots by Pb(II)

Glutathione capped CdTe quantum dots (QD) were synthesised using a simple experimental procedure and two samples were subjected of study (QD₅₅₀ and QD₆₀₀). The maximum of the excitation and emission spectra and the emission full width of half maximum of these two QD were: QD₅₅₀, 307, 550 and 37 nm; QD₆₀₀, 307, 600 and 39 nm. The steady state fluorescence properties of the two QD undergo variation when the pH of the aqueous solution is varied and are characterised by different apparent pKa: QD₅₅₀, 5.2 ± 0.1; QD₆₀₀, 6.3 ± 0.3. The fluorescence intensity of the QD₅₅₀ is markedly quenched by the presence of micromolar quantities of Pb(II) ion (Stern–Volmer constant of about 7 × 10⁵ M⁻¹). PARAFAC analysis of the excitation emission matrices (EEM) of QD₅₅₀ acquired as function of the Pb(II) ion showed that only one linearly independent component describes the quenching of the QD₅₅₀ by the Pb(II) ion allowing robust estimation of the excitation and emission spectra and of the quenching profiles.     

Determination of Meloxicam Using Europium Sensitized Luminescence in the Presence of Co-Luminescence Reagents

A sensitive time- resolved luminescence method for the determination of meloxicam (MX) in methanol and in aqueous solution is described. The method is based on the luminescence sensitization of europium (Eu³⁺) by formation of ternary complex with MX in the presence of 1,10- phenanthroline as coligand, Tween-80 as surfactant and gadolinium ion as a co-luminescence reagent. The signal for Eu- MX-1, 10- phenanthroline is monitored at λ_ex = 360 nm and λ_em = 620 nm. Optimum conditions for the formation of the complex in aqueous system were 0.01 M TRIS buffer, pH 8.0, 1,10- phenanthroline (6.0 × 10⁻⁶ M) , Gd³⁺ (7.0 × 10⁻⁶ M), Tween-80 (0.28%) and 1.75 mM of Eu³⁺ which allows the determination of 20–800 ppb of MX with limit of detection (LOD) of 7 ppb. The relative standard deviations of the method range between 0.1 and 1.1% indicating excellent reproducibility of the method. The proposed method was successfully applied for the assay of MX in pharmaceutical formulations, plasma and in urine samples. Average recoveries of 99.8 ± 1.1%, 100.2 ± 0.9% and 100.9 ± 1.1% were obtained for MX in tablet, plasma and urine sample respectively.     

Synthesis of Functionalized ZnSe Nanoparticles and Their Applications in the Determination of Bovine Serum Albumin

Luminescent quantum dots (QDs)-semiconductor nanocrystals were promising alternative to organic dyes for fluorescence-based applications. In this paper, we developed procedures to use mercaptoacetic acid (MAA) to modify ZnSe nanoparticles and made the nanoparticles to be soluble for the quantitative and selective determination of bovine serum albumin (BSA). Maximum fluorescence intensity was produced at pH 7.0, with excitation and emission wavelengths at 242 and 348 nm, respectively. Under optimal conditions, the straight line equation: ^△ F = 0.38 + 0.34 C (μg/ml) was found between the relative fluorescence intensity and the concentration of BSA in the range of 9.6–124.8 μg/ml, and the limit of detection was 2 μg/ml.     

Spectrofluorimetric Assessment of Hydrochlorothiazide Using Optical Sensor Nano-Composite Terbium Ion Doped in Sol-Gel Matrix

A new, simple, sensitive and selective spectrofluorimetric method for the determination of Hydrochlorothiazide was developed in acetonitrile at pH 6.2. The Hydrochlorothiazide can remarkably enhance the luminescence intensity of the Tb³⁺ ion doped in sol–gel matrix at λ_ex = 370 nm. The intensity of the emission band of Tb³⁺ ion doped in sol–gel matrix was increased due to the energy transfer from the triplet excited state of Hydrochlorothiazide to (⁵D₄) excited energy state of Tb³ ion. The enhancement of the emission band of Tb³⁺ ion doped in sol–gel matrix at (⁵D₄→⁷ F₅) 545 nm was directly proportion to the concentration of Hydrochlorothiazide with a dynamic ranges of 5.0 × 10⁻¹⁰—5.0 × 10⁻⁶ mol L⁻¹ and detection limit of 2.2 × 10⁻¹¹ mol L⁻¹.     

Terbium Sensitized Luminescence for the Determination of Ketoprofen in Pharmaceutical Formulations

This paper explores an ultra-sensitive luminescence method for the determination of Ketoprofen (KP) in pharmaceutical formulations. The technique is indirect and exploits the luminescence enhancement of terbium (Tb³⁺) by complexation with KP (Tb³⁺–KP), which was monitored at respective excitation and emission wavelengths of λ _ex = 258 nm and λ _em = 549 nm. The effect of varying the Tb³⁺ concentration and using multiple solvents was examined to determine optimal experimental conditions. Maximum sensitization was accomplished in the presence of methanol where the most favourable condition for the formation of the complex was recorded at a level of 1.0 × 10⁻⁵ M of Tb³⁺. Under these optimum experimental conditions, linear calibration curve was obtained in the range of 2.8 × 10⁻⁷–3.1 × 10⁻⁶ M with a detection limit of 8.7 × 10⁻⁸ M. The technique was validated with ‘working’ reference standards and produced relative standard deviations < 2% indicating that the reproducibility was highly acceptable. The proposed method was successfully applied to assays of KP in pharmaceutical formulations with average recoveries of 92–98%. The results were found to be in good agreement with those obtained by HPLC. The method is highly suited for general applications of this nature.     

Synthesis, characterization, DNA binding and cleavage studies of mixed-ligand Cu(II) complexes of 2,6-bis(benzimidazol-2-yl)pyridine

Four novel copper(II) complexes of the composition [CuLX] where L = 2,6-bis(benzimidazole-2yl)pyridine, X = dipyridophenazine (L₁), 1,10-phenanthroline (L₂), hydroxyproline (L₃) and 2,6-pyridine dicarboxylic acid (L₄) were synthesized and characterized by using elemental analysis, FT-IR, UV–vis, ESI-MS, molar conductance and magnetic susceptibility measurements. The complexes [CuLL₁](NO₃)₂ [1], [CuLL₂](NO₃)₂ [2], [CuLL₃](NO₃) [3] and [CuLL₄] (NO₃) [4] are stable at room temperature. In DMSO the complexes [1] and [2] are 1:2 electrolytes, [3] and [4] are 1:1 electrolytes. Based on elemental and spectral studies five coordinated geometry is assigned to all the four complexes. The interaction of four copper ion complexes with calf thymus DNA were carried out by UV–vis titrations, fluorescence spectroscopy, thermal melting and viscosity measurements .The binding constant (K_b) of the above four metal complexes were determined as 5.43 × 10⁴ M_,⁻¹ 2.56 × 10⁴ M⁻¹, 1.21 × 10⁴ M⁻¹ and 1.57 × 10⁴ M⁻¹ respectively. Quenching studies of the four complexes indicates that these complexes strongly bind to DNA, out of all complex 1 is binding more strongly. Viscosity measurements indicate the binding mode of complexes with CT DNA by intercalation through groove. Thermal melting studies also support intercalative binding. The nuclease activity of the above metal complexes shows that 1, 2 and 3 complexes cleave DNA through redox chemistry.     

Fluorescent Carbon Dots Capped with PEG<Subscript>200</Subscript> and Mercaptosuccinic Acid

The synthesis and functionalization of carbon nanoparticles with PEG₂₀₀ and mercaptosuccinic acid, rendering fluorescent carbon dots, is described. Fluorescent carbon dots (maximum excitation and emission at 320 and 430 nm, respectively) with average dimension 267 nm were obtained. The lifetime decay of the functionalized carbon dots is complex and a three component decay time model originated a good fit with the following lifetimes: τ ₁ = 2.71 ns; τ ₂ = 7.36 ns; τ ₃ = 0.38 ns. The fluorescence intensity of the carbon dots is affected by the solvent, pH (apparent pK _a of 7.4 ± 0.2) and iodide (Stern-Volmer constant of 78 ± 2 M⁻¹).     

Validated Spectrofluorimetric Method for the Determination of Lamotrigine in Tablets and Human Plasma Through Derivatization with <Emphasis Type="BoldItalic">o</Emphasis>-phthalaldehyde

A sensitive, simple and selective spectrofluorimetric method was developed for the determination of Lamotrigine (LMT) in pharmaceutical formulations and biological fluids. The method is based on reaction of LMT with o-phthalaldehyde in presence of 2-mercaptoethanol in borate buffer of pH 9.8 to yield a highly fluorescent derivative that is measured at 448 nm after excitation at 337 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The fluorescence-concentration plot was rectilinear over the range of 0.1–1.0 μg ml⁻¹ with lower limit of detection (LOD) 0.02 μg ml⁻¹ and limit of quantification (LOQ) 0.06 μg ml⁻¹ respectively. The proposed method was successfully applied to the the analysis of commercial tablets. Statistical comparison of the results obtained by the proposed and reference method revealed no significant difference in the performance of the two methods regarding the accuracy and precision respectively. The proposed method was further extended to the in-vitro and in-vivo determination of the drug in spiked and real human plasma. The mean percentage recoveries in spiked and real human plasma (n = 3) were 95.78 ± 1.37 and 90.93 ± 2.34 respectively. Interference arising from co-administered drugs was also studied. A proposal for the reaction pathway with o-phthalaldehyde was postulated.     

Spectroscopy study of air plasma induced by IR CO2 laser pulses

A spectroscopic study of ambient air plasma, initially at room temperature and pressures ranging from 32 to 101 kPa, produced by high-power transverse excitation atmospheric (TEA) CO₂ laser (λ=9.621 and 10.591 μm; τ _FWHM≈64 ns; power densities ranging from 0.29 to 6.31 GW cm⁻²) has been carried out in an attempt to clarify the processes involved in laser-induced breakdown (LIB) air plasma. The strong emission observed in the plasma region is mainly due to electronic relaxation of excited N, O and ionic fragments N⁺. The medium-weak emission is due to excited species O⁺, N²⁺, O²⁺, C, C⁺, C²⁺, H, Ar and molecular band systems of N ₂⁺(_{2}^{+}( B ²\varSigma _u⁺^{2}\varSigma _{\mathrm{u}}^{+} –X ²\varSigma _g⁺)^{2}\varSigma _{\mathrm{g}}^{+}) , N₂(C³ Π _u–B³ Π _g), N ₂⁺(_{2}^{+}( D² Π _g–A² Π _u) and OH(A² Σ ⁺–X² Π). Excitation temperatures of 23400±700 K and 26600±1400 K were estimated by means of N⁺ and O⁺ ionic lines, respectively. Electron number densities of the order of (0.5–2.4)×10¹⁷ cm⁻³ and (0.6–7.5)×10¹⁷ cm⁻³ were deduced from the Stark broadening of several ionic N⁺ and O⁺ lines, respectively. Estimates of vibrational and rotational temperatures of N ₂⁺_{2}^{+} electronically excited species are reported. The characteristics of the spectral emission intensities from different species have been investigated as functions of the air pressure and laser irradiance. Optical breakdown threshold intensities in air at 10.591 μm have been measured.     

Interaction of Thyroxine with 7 Hydroxycoumarin: A Fluorescence Quenching Study

The interaction between thyroxine hormone and 7 hydroxycoumarin (7HC) was investigated using fluorescence quenching method. The experimental results showed that thyroxine could quench the fluorescence of 7HC by forming the 7HC–thyroxine complex with static quenching. The apparent binding constants (K) between 7HC and thyroxine were determined to be 1.51 × 10⁴ (297 K) and 9.06 × 10³ (310 K). The binding sites (n) 0.98 ± 0.1. The thermodynamic parameters showed that the interaction between 7HC and thyroxine was driven mainly by hydrogen bonding interactions and van der Waals force. Calibration for thyroxine, based on quenching titration data, was linear in the concentration range 2.0 × 10⁻⁸ to 3.0 × 10⁻⁷ mol/l. The relative standard deviation was 2.58% for 2.0 × 10⁻⁷ mol/l thyroxine (n = 4) and the 3σ limit of detection was 3.42 × 10⁻⁸ mol/l in cationic surfactant CTAB medium.     

Specific heat measurement of stable and metastable liquid Ti–Al alloys

The specific heats of liquid Ti–20at.%Al and Ti–51at.%Al alloys are determined to be 33.01±2.75 and 31.27±2.91 J mol⁻¹ K⁻¹ in the stable superheated and metastable undercooled states by using an electromagnetic levitation drop calorimeter. The experimental temperature ranges are 1733–2133 K and 1511–1948 K, and maximum undercoolings of 230 (0.12 T _L) and 242 K (0.14 T _L) are achieved, respectively. On the basis of the experimental results, the specific heat dependence on the composition is obtained for binary Ti–Al alloys.     

Energy efficiency of femtosecond laser ablation of polymer materials

We present the results of an experimental study of the ablation spectral energy thresholds for a number of polymer materials ((C₂F₄) _n , (CH₂O) _n ) exposed to femtosecond (τ_0.5 ~ 45–70 fs) laser pulses (λ ~ 266, 400, 800 nm) under atmospheric conditions and under vacuum (p ~ 10–2 Pa). We have analyzed the energy thresholds and the efficiency of optical, thermophysical, and gasdynamic processes in laser ablation vs. the laser pulse duration and photon energy.     

A New Highly Sensitive and Selective Fluorescent Cadmium Sensor

Condensation product (L) of salicylaldehyde and semicarbazide behaves as a fluorescent sensor for Cd²⁺ ion, in 1:1 DMSO:H₂O, over Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ ions. The emission peak of L at λ_max = 520 nm, on excitation with 420 nm wavelength photons, showed an enhancement in intensity of ca 60-fold when interacted with Cd²⁺ ion. The intensity was however found to remain unaltered when interacted with metal ions—Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺. The intensity increases by approximately 20 fold on interaction with Zn²⁺ ion. The increase in the fluorescent peak can be explained on the basis of photo induced electron transfer (PET) mechanism. A 1:1 complexation between Cd²⁺ and L with log β = 4.25 has been proved.     

Spectrofluorometric Determination of Methocarbamol in Pharmaceutical Preparations and Human Plasma

A simple, sensitive and rapid spectrofluorometric method for determination of methocarbamol in pharmaceutical formulations and spiked human plasma has been developed. The proposed method is based on the measurement of the native fluorescence of methocarbamol in methanol at 313 nm after excitation at 277 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.05–2.0 μg/mL, with good correlation (r = 0.9999), limit of detection of 0.007 μg/ mL and a lower limit of quantification of 0.022 μg/ mL. The described method was successfully applied for the determination of methocarbamol in its tablets without interference from co-formulated drugs, such as aspirin, diclofenac, paracetamol and ibuprofen, The results obtained were in good agreement with those obtained using the official method (USP 30).The high sensitivity of the method allowed the determination of the studied drug in spiked human plasma with average percentage recovery of 99.42 ± 3.84.     

Interaction of ethidium bromide and caffeine with DNA in aqueous solution

Two component (ethidium bromide–caffeine, ethidium bromide–DNA) and three component (ethidium bromide–caffeine–DNA) systems in aqueous saline (0.01 M NaCl) phosphate buffer solutions (pH 6.86, T = 298 K) are studied spectrophotometrically. The equilibrium constants for dimerization of caffeine, K _D  = 1.22 ± 2 M⁻¹, and for heteroassociation of ethidium bromide with caffeine, K = 71 ± 8 M⁻¹, in ethidium bromide–caffeine systems are determined. When the concentration of caffeine is increased, the dynamic equilibrium of the solution shifts toward formation of heterocomplexes which are, presumably, stabilized by dispersive and hydrophobic interactions of chromophores. The equilibrium parameters for ethidium bromide complex formation with DNA are calculated: the coupling constant for the dye with the biopolymer, K ₁ = (232 ± 16)⋅103 M⁻¹, and the number of base pairs of the biopolymer participating in bonding with the ligand, n ₁ = 3.6 ± 0.2, are calculated. Given these values, it is suggested that under these experimental conditions there are two types of bonding between ethidium bromide and the nucleic acid — intercalation and “external” bonds. A McGhee–von Hippel model for a three component system and the numerical values of the parameters for molecular complex formation in two component systems are used to calculate the bonding constant for caffeine with DNA, K ₂ = 127 ± 30 M⁻¹, and the number of base pairs of DNA which bond with caffeine, n ₂ = 1.7 ± 0.2. The concentrations of ethidium bromide and caffeine in the composition of two and three component complexes are calculated as functions of the nucleic acid content in the solution. An analysis of the concentration dependences shows that heteroassociation of ligands has a significant effect on the reduction in the concentration of ethidium bromide–DNA complexes in a three component system for low DNA concentrations, while at high DNA concentrations the bonding of caffeine with the biopolymer has this effect. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 1, pp. 143–151, January–February 2009.     

A Fe<Superscript>3+</Superscript>/Hg<Superscript>2+</Superscript>-Selective Anthracene-Based Fluorescent PET Sensor with Tridentate Ionophore of Amide/β-Amino Alcohol

A new anthracene-based fluorescent PET sensor 1 with a tridentate ionophore of amide/β-amino alcohol displays very good selectivity and sensitivity for Fe³⁺ (K _a = 1.6 × 10³ M⁻¹) and Hg²⁺ (K _a = 2.1 × 10³ M⁻¹) in CH₃CN–H₂O (3:7, v/v) with detection limit of 1 μM. More fluorescence enhancement was observed when 1 selectively detected Fe³⁺ or Hg²⁺ in CH₃CN and its detection limit was up to 0.03 μM.     

Fluorescent Property of the Gd<Superscript>3+</Superscript>-Doped Terbium Complexes and Crystal Structure of [Tb(TPTZ)(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]Cl<Subscript>3</Subscript>·3H<Subscript>2</Subscript>O

The complex of Tb(TPTZ)Cl₃·3H₂O was synthesized by adding the ethyl alcohol solution of TbCl₃ (1 mmol) to the solution of 2,4,6-tris-(2-pyridyl)-s-triazine(TPTZ,1 mmol) with constant stirring. The solution which had been filtered was kept at the room temperature for 4 weeks, and then a kind of transparent crystal was formed. Besides, nine kinds of solid complexes in the different molar proportion of terbium to gadolinium had been synthesized by adopting the similar method mentioned above. It was inferred from the elemental analysis and rare earth complexometry that the composition of these complexes is (Tb_xGd_y)(TPTZ)Cl₃·3H₂O (x : y = 0.9 : 0.1, 0.8 : 0.2, 0.7 : 0.3, 0.6 : 0.4, 0.5 : 0.5, 0.4 : 0.6, 0.3 : 0.7, 0.2 : 0.8, 0.1 : 0.9). The absorption spectra and photoluminescence of the complexes were determined in dimethylsulfoxide (DMF), which showed that the excitation of the complexes is mostly ligand based. The triplet state energy level of TPTZ was measured, indicating that the lowest excitation state energy level of Tb(III) and the triplet state energy level of TPTZ match well each other. The fluorescent data indicated that the fluorescent emission intensity of Tb³⁺ ions would be enhanced in the complexes after terbium was doped with Gd³⁺ ion. When x : y was 0.5 : 0.5, the fluorescent emission intensity was the largest. The result obtained by testing the X-ray diffraction of the monocrystal revealed that the molecular formula of the mono-crystal complex is [Tb(TPTZ)(H₂O)₆]Cl₃·3H₂O. The number of metal ion coordinates is nine, and the tridentate TPTZ and six water molecules are bonded with terbium respectively. Besides, it also revealed that the monocrystal belongs to the monoclinic system, and space group Cc with the following unit cell parameters is a = 1.4785 (3) nm, b = 1.0547 (2) nm, c = 1.7385 (4) nm, β = 94.42 (3)°, V = 2.7028 (9) nm³ and Z = 4.