一种基于热补偿电流的大功率VCSEL模型

基于激光速率方程并加入了热补偿电流,建立了一种用于分析大功率垂直腔面发射激光器(VCSELs)输出特性(P-I)的模型。先测得已知温度下的P-I特性,根据实验数据,利用阈值电流和温度的关系和Gao等人的方法得到a参数和其它参数。把所得参数代入模型,可以获得所需温度下的P-I特性。从模拟结果可以看出,不同温度下,模拟结果与实验结果吻合的非常好,而不考虑热补偿电流时差别很大,从而证明了该激光器模型的有效性;同时,从有源区温度和电流关系曲线可以看出,有源区随着电流增加温升很快,进一步证实了我们研究温度影响的重要性。     

人工神经网络在HL-2A装置汤姆逊散射数据处理中的应用

人工神经网络是一种强大的非线性数据分析算法,其中的感知器神经网络第一次被用于处理HL-2A装置上汤姆逊散射系统的电子温度数据。采用输入层、隐藏层和输出层等三层神经网络结构,输入层为标定数据或测量数据,隐藏层使用sigmoid函数作为传递函数,输出层为电子温度值。从数据处理结果可以看出,该计算方法与传统的χ2最小值方法计算的结果吻合,能够得到可靠的电子温度数据。而且由于计算温度时采用矩阵计算,计算速度比使用χ2最小值法提高20倍以上,为将来利用汤姆逊散射测量的电子温度数据实现等离子体剖面实时反馈控制提供了可能。     

A sapphire fibre thermal probe based on fast Fourier transform and phase-lock loop

A sapphire fibre thermal probe with Cr³⁺ ion-doped end is developed by using the laser heated pedestal growth method. The fluorescence thermal probe offers advantages of compact structure, high performance and ability to withstand high temperature in a detection range from room temperature to 450℃. Based on the fast Fourier transform (FFT), the fluorescence lifetime is obtained from the tangent function of phase angle of the non-zeroth terms in the FFT result. This method has advantages such as quick calculation, high accuracy and immunity to the background noise. This FFT method is compared with other traditional fitting methods, indicating that the standard deviation of the FFT method is about half of that of the Prony method and about 1/6 of that of the log-fit method. And the FFT method is immune to the background noise involved in a signal. So, the FFT method is an excellent way of processing signals. In addition, a phase-lock amplifier can effectively suppress the noise.     

Edge Particle Flux with Temperature Fluctuation in the HL-2A Tokamak

Electron temperature, density, plasma potential and their fluctuation profiles at edge plasmas are measured simultaneously with a reciprocating probe system in HL-2A. The analysis results of four-tip data indicate that the temperature fluctuation has relative amplitude of 10-15%, gives more contribution to particle flux in lower （0- 25 kHz） and higher frequency （50-250 kHz） ranges. The coherence between temperature fluctuations and density or potential fluctuations implies that their coupling will impact anomalous transport. The measured diffusion coefficient is about three times of the Bohm diffusion coefficient when considering the temperature fluctuation. The particle flux with temperature fluctuation is discussed in HL-2A for the first time.     

Research of the planar optical fiber Bragg grating hydrophone probe

This paper presents the planar Fiber Bragg Grating （FBG） hydrophone probe sensing principle, and theoretically and experimentally researches the probe structure sensitivity, the receiving sensitivity frequency response characteristic and the acceleration response property. Planar sheet is made of stainless steel, its thickness is 0.15 mm, its diameter is 15mm, and the length of hollow circular shell is 20 mm. For this size of the structure, the probe structure sensitivity is up to 23 fm/Pa, which is about 7300 times of the value of the bare fiber. The resonance frequency is 6.5 kHz, and the amplitude-frequency curve of the receiving sensitivity response is relatively flat within the frequency range of 100 Hz to 5.5 kHz. The output yielded by one unit acceleration （1m/s2） is equivalent to （2.52 to 3.26 Pa） acoustic pressure acting output. This probe structure is easy to form FBG hydrophone array by multiplexing technique. The research shows that this planar structure not only can form FBG hydrophone probe, but also can constitute optical FBG laser hydrophone probe. The structure can realize different bandwidth, different range acoustic pressure measurement by adjusting the geometrical size of the sheet.     

High-power 1.625-μm strained multiple-quantum-well lasers as a light source for optical time-domain reflectometers

An optical output power of 160 mW has been successfully achieved in 1.625-m strained multiple-quantum-well lasers at a forward current of 800 mA under pulsed operation. Such a high output power has been achieved by optimizing the separated confinement heterostructure layer thickness. The operating life of high-power 1.625-m lasers has been estimated from the results of accelerated ageing at an ambient temperature of 45°C and 500 mA under continuous-wave operation. No significant change in the optical output power was observed up to 2000 hours. The mean time to failure is estimated to be about 4.5×10⁴ hours at 500 mA and 45°C.     

电子迥旋加热等离子体及热电子环特性的实验研究

在简单磁镜MM-2中,采用15GHZ大功率迴旋管进行了电子迴旋共振加热(ECRH)实验。结果表明,随充气压强的提高,预电离时间迅速变短。在高气压“C-模式”运行区,等离子体径向密度分布呈马鞍形。在迴旋管输出30kW功率的条件下,适于建立热电子环的气体压力窗为(0.4—1.2)×10^-5Torr。利用一个可移动Laugmuir探针配合反磁测量的简便方法,在中心场为2.95kG时,确定了电子环半径为7cm,环厚约4cm,环的轴向边界由z=±10cm一直延伸到z=±20cm。热电子温度为140—170keV,热电环平均β值为(4—5)％。观测到了由热电子环不稳定性引起的迸发式径向电子逃逸,并同时发生反磁信号跌落。     

对数积分放大器在弱光检测中的研究与应用

为解决微弱光信号检测中信号动态范围宽、噪声大等难点,利用对数积分放大原理设计了微弱光信号检测电路。并利用2种不同特性的硅光电二极管（PN和PIN）作为光电转换器件验证电路的性能。实际结果表明:在入射光功率特性上,2种光电二极管电路输出相似,对信号具有压缩作用。在入射光频率特性上,f20 Hz时PN型电路输出幅值是PIN型的1.2倍以上;f40 Hz时PN型电路输出幅值变化约90%,PIN型电路输出更稳定,最大变化约50%。在光谱测量上,2种光电二极管测得的光谱与实际光谱相比变化趋势相同,峰值波长一致。     

High-precision nuclear magnetic resonance probe suitable for in situ studies of high-temperature metallic melts

High-temperature nuclear magnetic resonance (NMR) has proven to be very useful for detecting the temperature-induced structural evolution and dynamics in melts. However, the sensitivity and precision of high-temperature NMR probes are limited. Here we report a sensitive and stable high-temperature NMR probe based on laser-heating, suitable for in situ studies of metallic melts, which can work stably at the temperature of up to 2000 K. In our design, a well-designed optical path and the use of a water-cooled copper radio-frequency (RF) coil significantly optimize the signal-to-noise ratio (S/NR) at high temperatures. Additionally, a precise temperature controlling system with an error of less than ±1 K has been designed. After temperature calibration, the temperature measurement error is controlled within ±2 K. As a performance testing, ²⁷Al NMR spectra are measured in Zr-based metallic glass-forming liquid in situ. Results show that the S/NR reaches 45 within 90 s even when the sample's temperature is up to 1500 K and that the isothermal signal drift is better than 0.001 ppm per hour. This high-temperature NMR probe can be used to clarify some highly debated issues about metallic liquids, such as glass transition and liquid-liquid transition.     

The optical spectroscopy of chromium in ed-2 silicate glass

The technique of fluorescence line narrowing is used to probe the inhomogeneously broadened ²E-⁴A₂ transition of Cr³⁺ in a silicate glass. The resultant sharp zero-phonon line is accompanied by a vibrational sideband which carries information about the range of vibrational modes in the glass and about the strength of the orbit-lattice interaction. The homogeneous broadening of the zero-phonon line is measured as a function of temperature and compared with the analogous broadening in Cr-doped crystals. The broadening of the zero-phonon line in the glass at high temperatures is attributed to a Raman relaxation mechanism such as is observed in crystals. At low temperatures, however, there is an additional broadening mechanism which has an approximately linear dependence on temperature and which has no analogue in crystalline materials.     

台式核磁共振仪变温探头系统的研制

变温探头系统是拓展低场强核磁共振仪应用领域的重要部件. 半导体致冷片由于体积小,功耗低,控制方便,广泛应用于各种制冷场合. 本研究利用半导体致冷组件研制的变温探头系统能实现-20 ℃~60 ℃范围变温,相比传统高场强核磁共振波谱仪变温探头系统,结构简单、性价比高. 在NMI20-analyst台式核磁共振仪上应用3.5%的CuSO₄水溶液对本变温系统进行了测试,实验效果能够体现出相应的规律,具有实用价值. 最后对系统与实验结果进行了讨论,给出了改进方案.     

一体化光纤滤除器和端帽实现20 kW激光输出北大核心CSCD

在高功率光纤激光系统中,包层光滤除器能将光纤中包层光滤除以保证输出激光光束质量,光纤端帽通过对输出激光扩束降低输出光纤端面的光功率密度,从而保护光纤端面不受损坏,两者都是高功率光纤激光系统稳定运行的重要核心器件。将包层光滤除器和光纤端帽进行一体化设计,制备了一体化高功率光纤包层光滤除器和光纤端帽并分别应用于20 kW合束系统和单纤系统中,输出功率达到20 kW时,端帽的最高温度约为40℃,温升速率约为0.8℃/kW。     

用于等离子体诊断的ps激光探针

 ps激光探针作为激光等离子体诊断的探针光源，它是通过两次倍频和两次受激喇曼散射，将波长为1 054nm、脉宽约为1ns激光转换成波长为308nm、脉宽小于30ps的紫外光。研究结果表明：探针光系统输出能量大于1mJ，脉宽小于30ps，均匀性较好，运行成功率大于90%，满足了激光等离子体诊断的要求。     

发光及显示器件光电特性测试系统设计

为了提高发光及显示器件光电特性测量实验的智能化程度,减小人为误差,并考虑工作温度对其光电特性的影响,设计了一种能够自动、同步测量发光体亮度、温度、伏安特性和寿命的系统。系统主要由LS-110型亮度计、GPD-3303型电源、自制的温度测量模块及测量软件四部分组成。基于实验室虚拟仪器工程平台,利用亮度计对器件的亮度进行测量,利用单片机和温度传感器对器件的温度进行测量,通过上位机程序控制电源步进输出、读取实际输出电流值和电压值,并将采集到的数据发送到上位机,实时绘制出了亮度-电压、电流-电压、温度-电压、亮度-温度、电流-温度、亮度-电流特性曲线。系统目前可以同时对器件的亮度、温度和伏安特性进行自动测量和直观显示,并且具备自动保存数据和图像的功能,实现了发光及显示器件光电特性测量的智能化,具有综合性强、精确度及自动化程度高、操作简易等特点。     

Design, construction, and validation of a 1-mm triple-resonance high-temperature-superconducting probe for NMR

We report a 600-MHz 1-mm triple-resonance high-temperature-superconducting (HTS) probe for nuclear magnetic resonance spectroscopy. The probe has a real sample volume of about 7.5 microl, an active volume of 6.3 microl, and appears to have the highest mass sensitivity at any field strength. The probe is constructed with four sets of HTS coils that are tuned to 1H, 2H, 13C, and 15N, and there is a z-axis gradient. The coils are cooled with a conventional Bruker CryoPlatform to about 20 K, and the sample chamber can be regulated above or below room temperature over a moderate range using a Bruker variable temperature unit. The absolute S/N for 0.1% ethylbenzene is approximately 1/3 that of a conventional 5mm probe with just 1/70 of the sample volume. We demonstrate the utility of this probe for small molecules and proteins with 2D spectra of just 1.7 microg of ibuprofen and 400 microM 15N-labeled ubiquitin.     

Microthermal machining using scanning thermal microscopy

Microthermal machining using scanning thermal microscopy (SThM) has been performed on polymethylmethacrylate (PMMA) materials, which are a soft polymer and suitable for microthermal machining. The probe of the SThM is heated and used as a machining tool on the PMMA material. Adjustment of the resistance can control the probe’s temperature. To obtain good machining quality, the probe temperature must be continuously controlled. The temperature of the machined area of the sample’s surface must be higher than the melting point of the PMMA material. However, a lower machined quality occurs when the probe temperature is too high. Furthermore, the adhesive phenomenon is very apparent when the contact mode is used in SThM machining. The microthermal machining of PMMA materials using SThM in semi-contact mode at a probe temperature of 400 °C has the best results. The technique can be used to process a complicated pattern and applied for use of high-density data storage.     

Nonlinear optical investigations of the dynamics of hydrogen interaction with silicon surfaces

Optical second-harmonic generation (SHG) from silicon surfaces may be resonantly enhanced by dangling-bond-derived surface states. The resulting high sensitivity to hydrogen adsorption combined with unique features of SHG as an optical probe has been exploited to study various kinetical and dynamical aspects of the adsorption system H₂/Si. Studies of surface diffusion of H/Si(111)7×7 and recombinative desorption of hydrogen from Si(111)7 × 7 and Si(100)2 × 1 revealed that the covalent nature of hydrogen bonding on silicon surfaces leads to high diffusion barriers and to desorption kinetics that strongly depend on the surface structure. Recently, dissociative adsorption of molecular hydrogen on Si(100)2×1 and Si(111)7×7 could be observed for the first time by heating the surfaces to temperatures between 550 K and 1050 K and monitoring the SH response during exposure to a high flux of H₂ or D₂. The measured initial sticking coefficients for a gas temperature of 300K range from 10^–9 to 10^–5 and strongly increase as a function of surface temperature. These results demonstrate that the lattice degrees of freedom may play a decisive role in the reaction dynamics on semiconductor surfaces.     

脉冲射频容性耦合氩等离子体的发射探针诊断

利用工作在浮点模式下的发射探针,对500 Hz脉冲调制的27.12 MHz容性耦合氩气等离子体的空间电位和电子温度的时变特性进行了诊断.等离子体空间电位是通过测量强热状态下的发射探针电位获得的,而电子温度则是由发射探针在冷、热状态下的电位差来估算得到.测量结果表明:脉冲开启时,空间电位会快速上升并在300μs内趋于饱和;当脉冲关断后,空间电位经历了快速下降后趋于稳定的过程.电子温度在脉冲开启时存在过冲并趋于稳定的特征;而在脉冲关断期间,电子温度在300μs内则快速下降到0.45 e V后略有上升.无论在脉冲开启或关断期间,空间电位基本上都随功率和气压的变化存在有线性的依赖关系;而放电功率对脉冲开启期间过冲电子温度与稳态电子温度差异的影响较大.针对空间电位和电子温度在各阶段及不同放电条件下的时变特性,给出了相应的解释.     

Acoustic temperature measurement in a rocket noise field

A 1 μm diameter platinum wire resistance thermometer has been used to measure temperature fluctuations generated during a static GEM-60 rocket motor test. Exact and small-signal relationships between acoustic pressure and acoustic temperature are derived in order to compare the temperature probe output with that of a 3.18 mm diameter condenser microphone. After preliminary plane wave tests yielded good agreement between the transducers within the temperature probe's ～2 kHz bandwidth, comparison between the temperature probe and microphone data during the motor firing show that the ±～3 K acoustic temperature fluctuations are a significant contributor to the total temperature variations.     

Phase-Drift-Suppression in Heterodyne Detection Using Coherent Light Source

The validity of the phase-drift-suppression method (PDSM) using coherent light sources of a single-mode laser diode (LD) or multimode Nd:YAG laser has been experimentally shown. PDSM can enhance the stability of an output signal in heterodyne detection using higher order harmonics. In the Michelson interferometer, the fundamental and second harmonics in heterodyne beat signals were detected by two lock-in amplifiers, and the computed signal intensity (CSI) was obtained in the computer as an output signal. Relations between the stability of CSI and modulation indexes in sinusoidal phase modulations were measured. The CSI stability was enhanced about twice by PDSM using a single-mode laser diode, and from 4 times to 9 times using a multimode laser.