正相液相色谱法测定洗涤用品中的烷基酚聚氧乙烯醚

建立了正相液相色谱法测定洗涤用品中烷基酚聚氧乙烯醚的分析方法.洗涤用品样品以正己烷.异丙醇混合溶液超声提取后,采用Agilent ZORBAX NH2(5μm,250 mm×4.6 mm i.d.)色谱柱,以A(90%正己烷.10%异丙醇,V/V)和B(90%异丙醇-10%水,V/V)为流动相进行梯度洗脱,不同聚合度的烷基酚聚氧乙烯醚色谱峰实现了理想的分离效果.在低、中、高3个添加水平下,烷基酚聚氧乙烯醚的平均回收率为92.3%～95.7%,相对标准偏差在3.9%～5.7%之间.     

凝胶过滤色谱-串联质谱法测定纺织品中的烷基酚聚氧乙烯醚

建立了纺织品中烷基酚聚氧乙烯醚的凝胶过滤色谱-串联质谱(GFC-MS/MS)分析方法。纺织品样品采用加速溶剂萃取法,以无水乙醇为提取溶剂进行提取,提取液经Sep-Pak Carbon/NH2石墨化碳黑/氨基复合型固相萃取柱净化。烷基酚聚氧乙烯醚经Shodex MSpak GF-310 2D色谱柱(150×2.0 mm)分离后,在多反应监测(MRM)模式下进行串联质谱定性及定量分析。方法对壬基酚聚氧乙烯醚(NPnEO)和辛基酚聚氧乙烯醚(OPnEO)的定量限均为0.2 mg/kg,在0.2～5 mg/kg的3个添加水平范围内,NPnEO的平均回收率为84.2%～93.5%,相对标准偏差(RSD)为3.9%～7.5%;OPnEO的平均回收率为85.5%～96.1%,RSD为3.4%～8.1%。该方法能够满足纺织品中烷基酚聚氧乙烯醚的检测要求。     

洗涤用品中5种荧光增白剂的高效液相色谱法检测及质谱确证

建立了同时测定洗涤用品中5种荧光增白剂类化合物(荧光增白剂393、荧光增白剂KCB、荧光增白剂CBS-127、荧光增白剂KSN和荧光增白剂OB)的高效液相色谱分析方法及质谱确证方法。洗涤样品以四氢呋喃为提取溶剂进行超声提取,提取液离心处理后,取上清液经微孔滤膜过滤后测定。采用Agilent Eclipse XDB-C18色谱柱(250 mm×4.6 mm,5μm)分离,以甲醇-水二元流动相梯度洗脱,流速1.0 mL/min,柱温25℃,荧光增白剂KCB和荧光增白剂CBS-127的检测波长为359 nm,荧光增白剂393、荧光增白剂KSN和荧光增白剂OB的检测波长为372 nm。荧光增白剂393的定量限为0.25 mg/kg,荧光增白剂KCB、荧光增白剂CBS-127、荧光增白剂KSN和荧光增白剂OB的定量限为0.5 mg/kg。在低、中、高3种加标水平下的平均回收率为87.8%~103.7%,相对标准偏差为1.5%~4.4%。方法的日内RSD均小于1%,日间RSD均小于2%。适用于洗涤用品中5种荧光增白剂类化合物的测定。     

高效液相色谱-质谱法测定生活用纸中的烷基酚聚氧乙烯醚

采用高效液相色谱-质谱法测定生活用纸中的烷基酚聚氧乙烯醚。样品剪碎后,经乙腈超声萃取,提取液在Dikma Inspire HILIC色谱柱上分离,以乙腈-10mmol·L-1乙酸铵溶液为流动相进行梯度洗脱,采用电喷雾正离子源-选择反应监测模式检测。各聚合度的烷基酚聚氧乙烯醚的质量浓度在一定范围内与其峰面积呈线性关系,测定下限(10S/N)在1.0~4.3μg·kg-1之间,加标回收率在51.0%~117%之间。方法适用于测定生活用纸中不同聚合度的烷基酚聚氧乙烯醚,测定值的相对标准偏差(n=6)在2.4%~12%之间。     

超声萃取-高效液相色谱法测定土壤中8种烷基酚和烷基酚聚氧乙烯醚

建立了一种测定土壤中8种烷基酚(APs)和烷基酚聚氧乙烯醚(APEOs)的分析方法。样品用二氯甲烷-乙酸乙酯(4∶1,V/V)混合溶剂进行3次超声提取,经硅胶固相萃取柱净化,采用高效液相色谱(HPLC)和Waters PAH C_(18)色谱柱(250 mm×4.6 mm,5.0μm),以乙腈-水(85∶15,V/V)溶液等度洗脱,在16 min内完成分离,通过荧光检测器(λ_(ex)/λ_(em)=228/300 nm)检测。结果表明,8种组分在10.0~500μg/L范围内有良好的线性关系(R0.999),检出限为1.2~3.0μg/kg,测定下限为4.8~12.0μg/kg。在高、低浓度基体加标测试中,8种组分的回收率分别为69.9%~81.8%和70.3%~84.8%,相对标准偏差(RSD)分别为2.2%~6.8%和5.1%~12.1%。本方法灵敏度高、重现性好,操作简单且便于推广,可用于土壤中烷基酚及烷基酚聚氧乙烯醚的同时测定。     

烷基酚聚氧乙烯醚在不同液相色谱分离模式中的分离研究

考察了烷基酚聚氧乙烯醚在反相色谱、正相键合色谱、硅胶吸附色谱、体积排阻色谱4种不同液相色谱分离模式中的分离效果,分别采用Kromasil C_(18)(250 mm× 4.6 mm,5 μm)、Agilent ZORBAX NH2(250 mm× 4.6 mm,5 μm)、Waters Spherisorb S3W(150 mm×2.0 mm,3 μm)和Shodex MSpak GF-310 2D(150 mm×2.0 mm,5 μm)色谱柱,以225 nm为紫外检测波长,对不同液相色谱分离模式的流动相组成、梯度洗脱条件、柱温、流速等进行了优化,并对烷基酚聚氧乙烯醚在不同液相色谱分离模式中的保留机理进行了初步探讨.结果表明,正相键合色谱实现了烷基酚聚氧乙烯醚的最佳分离;硅胶吸附色谱和体积排阻色谱的分离效果较正相键合色谱稍差.     

离子交换色谱-荧光检测法测定化妆品中苯海拉明及串联质谱确证

建立了化妆品中苯海拉明的离子交换色谱-荧光检测方法及液相色谱-串联质谱确证方法。样品用含0.2%甲酸的乙腈提取,定量检测时以乙腈-0.05 mol/L KH2PO4溶液(7+3,V/V)为流动相,强阳离子交换色谱柱(250×4.6 mm,5μm)分离,荧光检测激发波长258 nm,发射波长288 nm,外标法定量,苯海拉明检出限为1.5 mg/kg,在0.2~20 mg/L范围内线性关系良好,相关系数为0.9999,方法的回收率在87.6%~106.3%范围内,相对标准偏差低于6.3%。质谱确证时用BEH C18色谱柱分离,乙腈-0.2%甲酸系统梯度洗脱,采用质谱碎片和相对离子丰度进行定性确认。     

内墙涂料中烷基酚聚氧乙烯醚的高效液相色谱-质谱测定

建立了高效液相色谱-质谱法(HPLC-MS)测定内墙涂料中烷基酚聚氧乙烯醚(辛基酚聚氧乙烯醚和壬基酚聚氧乙烯醚)含量的方法。样品经甲醇超声提取,采用Agilent Eclipse Plus C18柱(4.6 mm×100 mm,3.5μm),以5 mmol/L乙酸铵溶液-甲醇作为流动相进行梯度洗脱分离,柱温35℃,流速0.3 m L·min-1,进样量5μL。质谱采用选择离子(SIM)方式进行检测,电喷雾离子源(ESI),正离子模式,基质匹配标准溶液定量,以A和B两种内墙涂料为代表进行加标回收实验。结果表明,辛基酚聚氧乙烯醚(OPEO)和壬基酚聚氧乙烯醚(NPEO)在0.1~5.0 mg/L浓度范围内线性关系良好(r0.99),回收率为83.8%~114.5%,相对标准偏差为1.3%~9.8%,定量下限为4.0~5.5 mg/kg。该方法操作简便、耗时短、有机试剂用量少、灵敏度高、稳定性好,应用于日常检测可大大降低检测成本,缩短检测周期,具有实际应用价值。     

气相色谱-质谱法检测洗涤用品中高关注物质卡拉花醛及其同分异构体

采用气相色谱-质谱(GC-MS)技术对洗涤用品中卡拉花醛及其同分异构体的总含量进行测定。样品以甲醇为溶剂进行超声提取,经DB-5MS(30 m×0.25 mm×0.25μm)色谱柱分离,SCAN模式进行分析检测。通过气相色谱法确定标准溶液中卡拉花醛及其同分异构体的比例,在5~100 mg/L浓度范围内建立标准曲线。方法定量下限(S/N=10)为0.25 mg/g,加标回收率为97.4%~111.5%,相对标准偏差(RSD,n=6)为3.7%~7.2%。该方法快速简便、准确可靠,适用于洗涤用品中卡拉花醛及其同分异构体的日常分析检测。     

高效液相色谱-串联质谱法检测三苯乙烯基苯酚聚氧乙烯醚

建立了高效液相色谱-串联质谱检测三苯乙烯基苯酚聚氧乙烯醚(tristyrylphenol ethoxylates,TSPn EO)的分析方法,并对TSPn EO在反相色谱柱(XBridge C_(18),150 mm×2.1 mm,3.5μm)、亲水相互作用色谱柱(XBridge HILIC,150 m m×2.1 m m,3.5μm)、氨基色谱柱(XBridge Amide,150 m m×2.1 m m,3.5μm)、伪反相色谱柱(C18柱(XBridge C_(18),50 mm×2.1 mm,5μm)与硅胶柱(Nova-Pak Silica,150 mm×2.1 mm,4μm)串联)4种不同液相色谱分离模式下的分离效果进行了研究。实验比较了5 mmol/L乙酸铵水-乙腈、0.1%(v/v)甲酸水-乙腈、水-乙腈和水-甲醇4种流动相组成及3种梯度洗脱条件对分离效果和灵敏度的影响。探讨了TSPnEO在电喷雾离子(ESI)源内的离子化特征,结果表明,在ESI正离子模式下,TSPnEO在离子源内形成[M+NH4]+离子,其聚合度的分布特征符合泊松分布。利用伪反相色谱柱,水-乙腈作为流动相,实现了不同聚合度(n=5~18)TSPnEO的分离。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.