Micromechanical and thermal behaviour of gel grown pure- and sodium-modified copper tartrate crystals

Results regarding micromechanical characteristics of gel grown pure- and sodium-modified copper tartrate crystals, bearing composition CuC₄H₄O₆·3H₂O, (Cu)_0.77(Na)_0.23C₄H₄O₆·3H₂O and (Cu)_0.65(Na)_0.35C₄H₄O₆·H₂O, as obtained on using indentation induced hardness testing technique are reported. Thermal behaviour of these crystals in the temperature ranging from room temperature (∼25 °C) to about 600 °C is also reported. Pure copper tartrate crystals are found to be thermally more stable than the sodium-modified ones. Dependence of Vickers’ hardness number H_v on load ranging from 0.049 to 2.94 N on two different planes for all the three compositions is analyzed. It is shown that after initial rise in the value of H_v, the same achieves saturation at a load of 0.49 N. Modification of copper tartrate crystal by introducing sodium in its lattice brings about a change in the micromechanical characteristics. The saturation value of H_v decreases with increase in the concentration of sodium ions. The results on (0 0 1) and (1 1 1) planes for both pure and modified copper tartrate crystals suggest hardness anisotropy. Relative difference of hardness between the two planes and yield strength for both pure and modified copper tartrate crystals is worked out. The experimental results are analyzed for applicability of Meyer’s law and Proportional Specimen Resistance Model. It is suggested that the experimental results indicating reverse ISE phenomenon may be explained in terms of the existence of a distorted zone near the crystal-medium interface. The integral method of Coats and Redfern approximation applied to the thermoanalytical data suggests “Random Nucleation Model” for the reaction kinetics of these crystals. Non-isothermal kinetic parameters such as activation energy, frequency factor and order of reaction are calculated.     

Evolution of the mössbauer spectra of ludwigite Co3 − x Fe x O2BO3 with substitution of iron for cobalt

A concentration series of single crystals of iron-cobalt ludwigites Co_{3 ? x} Fe _x O₂BO₃ (x = 0.0125, 0.025, 0.050, 0.10, 1.0) has been synthesized. The structure has been studied using X-ray diffraction and Mössbauer effect. A preferred occupation of nonequivalent crystallographic positions by iron in the ludwigite structure has been revealed. It has been found that the valence of substituting iron ions is three. It has been revealed that the structure of the γ-resonance spectrum of Co₂FeO₂BO₃ is complicated due to a composition disorder in the system.     

Monodisperse Co,Zn-Ferrite nanocrystals: Controlled synthesis,characterization and magnetic properties

Co_xZn_yFe_3−x−yO₄ ferrite (x=1 to 0; y=0 to1) nanocrystals have been synthesized by reverse microemulsion method. The nanocrystals are then comprehensively characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission transmission electron microscopy (FETEM), and magnetic properties were measured by using Vibrating sample magnetometer. X-ray analysis showed that all the crystals were cubic spinel. The lattice constant increased with the increase in Zn substitution. FETEM reveals that particle size varies in the range from 3 to 6 nm. As the concentration of Zn increases the magnetic behavior varies from ferromagnetic at y=0 and 0.2 to superparamagnetic to paramagnetic at y=1. The Curie temperature decreases with increasing concentration of Zn.     

Physical and magnetic properties of highly aluminum doped strontium ferrite nanoparticles prepared by auto-combustion route

Highly Al³⁺ ion doped nanocrystalline SrFe_12−xAl_xO₁₉ (0≤x≤12), were prepared by the auto-combustion method and heat treated in air at 1100 °C for 12 h. The phase identification of the powders performed using x-ray diffraction show presence of high-purity hexaferrite phase and absence of any secondary phases. With Al³⁺ doping, the lattice parameters decrease due to smaller Al³⁺ ion replacing Fe³⁺ ions. Morphological analysis performed using transmission electron microscope show growth of needle shaped ferrites with high aspect ratio at Al³⁺ ion content exceeding x≥2. Al³⁺ substitution modifies saturation magnetization (M_S) and coercivity (H_C). The room temperature M_S values continuously reduced while H_C value increased to a maximum value of 18,100 Oe at x=4, which is an unprecedented increase (∼321%) in the coercivity as compared to pure Sr-Ferrite. However, at higher Al³⁺ content x>4, a decline in magnetization and coercivity has been observed. The magnetic results indicate that the best results for applications of this ferrite will be obtained with an iron deficiency in the stoichiometric formulation.     

Growth and comparison of physicochemical properties of pure,Ca and Sr doped NH4Sb3F10 single crystals for electro optic applications

Single crystals of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ are grown by slow evaporation technique. The effect of dopants on the growth and physicochemical properties also have been investigated and reported for the first time. The grown crystals are characterized with the aid of single crystal X-ray diffractometry to confirm the crystal structure. EDAX studies are done to confirm the presence of dopants in the crystal lattice. The vibrational frequencies of various group ligands in the crystals have been derived from the Fourier transform infrared (FT-IR) spectrum. From the optical absorption spectrum the band gap energy was calculated and it was found to be 5.76, 6.29 and 6.35 eV for pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals respectively. Thermal stability of the sample has been analysed using TG-DTA analysis. The activation energy of pure, Ca²⁺ and Sr²⁺ doped NH₄Sb₃F₁₀ crystals were calculated from the dc conductivity measurements and it is found to be 0.2728, 0.2816 and 0.3622 eV Experimental results shows improved physicochemical properties when the dopant is added to the pure material.     

X-ray spectroscopic study of cobalt-zinc ferrites

K-absorption edges and the associated fine structures of cobalt and iron in cobalt-zinc ferrites of composition, Zn_xCo_1-xFe₂O₄ (x = 0, 0.25, 0.50 and 0.75) have been recorded employing a 40cm curved crystal spectrograph of transmission type. It is found that the cobalt and iron ions in these samples exist in valence states two and three respectively. Bond lengths have been determined using the X-ray fine structure methods. It is noted that estimated bond lengths are close to those obtained from crystallographic data. It is pointed out that the X-ray fine structure methods can be used to complement diffraction methods for the determination of bond lengths in samples containing atoms of nearly equal scattering power.     

Effect of aluminum substitution on the structural and magnetic properties of cobalt ferrite synthesized by sol-gel auto combustion process

Aluminum substituted cobalt ferrite powders (CoFe_2−xAl_xO₄) with varying composition from 0.0 to 1.0 in the step of 0.2 have been obtained by sol-gel auto combustion technique using citric acid as a fuel. The metal nitrate to fuel ratio was maintained 1:4 throughout the synthesis of CoFe_2−xAl_xO₄. The thermal analysis of as prepared samples is done by TGA technique. The compositional stoichiometry of the prepared samples is confirmed by Energy dispersive X-ray analysis technique. Single phase cubic spinel structure and nano phase structure of the synthesized powders were confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The crystallite size of 16-26 nm was obtained using Scherrer formula. SEM analysis shows the formation of uniform grain growth. The grain size obtained from SEM results is of the order of 30 nm. Maximum specific surface area was observed to be of the order of 52 m²/gm. The highest value of saturation magnetization and coercivity was observed for pure cobalt ferrite sample and it decreases as the aluminum content x increases. A strong co-relation between the saturation magnetization and aluminum content was observed. The decrease in magnetic properties is due to the substitution of aluminum ions in place of Fe³⁺.     

Ionic conductivity in the single crystals of non-stoichiometric fluorite phases M1−xRxF2+x (M=Ca,Sr, Ba; R=Y,La-Lu)

The ionic conductivity has been measured of single crystals of rare earth fluoride solid solutions in Ca, Sr and Ba fluorides described by the formula M_1?xR_xF_2+x (M=Ca, Sr, Ba; R=Y, La-Lu). The measurements have been done using dc and ac within the temperature range 300–850 K. With the increase of RF₃ concentration up to x=0.05–0.15 (in different systems) conductivity steeply increases. With the further concentration growth the conductivity increases only slightly, reaching saturation value for the solid solution Ba_1?xR_xF_2+x. The dependence of solid solution conductivity on the chemical composition has been studied for isoconcentrates M_0.9R_0.1F_2.1. It has been established that in CaF_2- based series the crystals with R=Gd, Tb possess maximum conductivity and minimum activation energy. For SrF₂ and BaF₂-based series the highest conductivity was observed for crystals containing LaF₃. It has been established that for all the crystals, independent of the chemical composition and defect concentration, the conductivity logarithm at definite temperature linearly depends on the activation energy. Within the investigated class of substances the optimum composition for solid electrolytes is Sr_0.69La_0.31F_2.31.     

Reactivity and XAFS study on (1−x)CeO2-xNiO (x=0.025-0.3) system in the two-step water-splitting reaction for solar H2 production

The redox reaction of Ce⁴⁺-Ce³⁺ promoted by the catalytic function of nickel ions in a (1−x)CeO₂-xNiO solid solution was investigated for solar H₂ production by the two-step water-splitting reaction. By irradiation using an infrared imaging lamp as a solar simulator, the O₂-releasing reaction with (1−x)CeO₂-xNiO solid solution proceeded at 1673-1873 K, and its reduced form was produced. The amounts of H₂ gas evolved by the reduced form were 1.2-2.5 cm³/g and the evolved gases amounts ratio of H₂/O₂ was nearly 2, which is equal to the stoichiometric value of the water-splitting reaction (H₂O=H₂+1/2O₂). The maximum amounts of evolved H₂ and O₂ gases were obtained at the Ce:Ni mole ratio of 0.95:0.05 (x=0.05) in the (1−x)CeO₂-xNiO system. The X-ray absorption fine structure (XAFS) measurement showed that the O₂-releasing and H₂-generation reactions with (1−x)CeO₂-xNiO solid solution were repeatable with the redox system of Ce⁴⁺-Ce³⁺, which was enhanced by the catalytic function of Ni²⁺-Ni⁰.     

Structure and magnetic properties of Ni0.5Zn0.5Mn0.5-xMoxFe1.5O4 ferrites prepared by sol-gel auto-combustion method

A series of Mo doped Ni-Mn-Zn ferrites compounds with the formula Ni_0.5Zn_0.5Mn_0.5-xMo_xFe_1.5O₄ (x = 0, 0.025, 0.05, 0.075 and 0.1) were first synthesized by sol-gel auto-combustion method. The X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and vibrating sample magnetometer (VSM) analysis were carried out to characterize the microstructural and magnetic properties of ferrites. Rietveld refinement of X-ray diffraction data confirmed the formation of cubic spinel structure and the emergence of FeMoO₄ phase with the substitution of Mo⁶⁺ contents. The grain size increased remarkably due to the formation of the liquid phase. The saturation magnetization (M_s) increased while the coercivity (H_c) decreased from 67.3 to 12.1 Oe due to the decrease of magneto-crystalline anisotropy constant. The initial permeability (μ_i) increased significantly from 34 (x = 0) to 114 (x = 0.075) and later decreased for x = 0.1. In our experiment, Ni_0.5Zn_0.5Mn_0.425Mo_0.075Fe_1.5O₄ ferrite presented the best microstructure and soft magnetic properties.     

Influence of vacancies on the electrical properties of the ZnCr2−xNixSe4 spinels

The effect of vacancies on the electronic transport in the ZnCr_2−xNi_xSe₄ paramagnetic single crystals is considered. For this purpose, the structure refinements, the high temperature electrical conductivity and the thermoelectric power measurements as well as the calculations of the vacancy model parameters were used. The electrical measurements have been done in the temperature range from 290 to 520 K for single crystals with x=0.001, 0.05, and 0.065. The above investigations provide evidence for polaron conduction in defective spinel materials. In particular: (1) at high temperatures a linear dependence between thermopower S and the electrical resistivity (ln ρ), a characteristic of small polarons, was observed, (2) an origin of small polarons in this case could be associated with a crystalline distortion, which is characterized by larger values of the anion parameter than u=0.375, which describes an ideal spinel structure, and (3) a large defectiveness, which is identified by the large value of the vacancy parameter of about β=11.5%. These effects are explained in terms of a polaron mechanism of the electrical conductivity including structural defects.     

Magnetic and Structural Properties of the Mechanically Alloyed Nd2(Fe100 − x Nb x )14B System

In this work we report the magnetic and structural properties obtained by Mössbauer spectrometry, Vibrating Sample Magnetometer and X-ray diffraction of milled powders with initial composition Nd₂(Fe_{100 ? x} Nb _x )₁₄B with x = 0 and x = 4. The mixtures were ball milled for different times up to 240 h. Structural and microstructural parameters were derived from high statistics X-ray patterns and discussed as a function of milling time. The Mössbauer spectra of the samples were fitted by means of a sextet and an hyperfine field distribution, associated to a pure iron phase (α-Fe) and a disordered iron-based phase, respectively. The α-Fe grain size decreases from 50 nm for 6 h up to 5 nm for 240 h milling time. The Vibrating Sample Magnetometer results allow to conclude that these samples behave as soft ferromagnets.     

Characterization of multiferroic LiTMxCu2−xO2 (TM=Ni and Zn) single crystals

We investigate a series of single crystalline samples of LiT_MxCu_2−xO₂ (T_M=Ni and Zn) grown by floating-zone technique. As-grown crystals showed a clear X-ray diffraction pattern of pure(single) phase. These crystals exhibit varied magnetic and electrical properties owing to successful incorporation of Ni and Zn dopants.     

The influence of the lattice on the spin transition in solids. Investigations of the high spin ag low spin transition in mixed crystals of [FexM1−x(2−pic)3]C12·MeOH

The spin transition behaviour in the iron(II) complex [Fe(2−pic)₃]Cl₂·MeOH (2−pic = 2−aminomethylpyridine) is discussed within a previously developed model which describes the High Spin (HS) ag Low Spin (LS) transition on the grounds of the elasticity theory. For this purpose, the relative HS fraction γ as a function of temperature was determined for mixed crystals of [Fe_xM_1-x(2-pic)₃]Cl₂·MeOH (M = Co, Zn, 0 < x ⩽ 1) employing ⁵⁷Fe Mössbauer spectroscopy. In addition, the temperature dependence of the lattice constants of the pure iron compound was derived from X-ray diffraction measurements and the Lamb Mössbauer factors for [Fe(2-pic)₃]Cl₂·Sol (Sol = EtOH, MeOH) were determined at room temperature. It is shown that essential features of the spin transition behaviour of the title system can be explained within the λ model. The quantitative agreement of the predicted elastic interaction energy with the experimental data, however, is not yet satisfactory.     

Magnetic properties of ErxY1−xF3 solid solutions

The Er_xY_1−xF₃ (x=0.1, 0.2, 0.7, 0.9, 1) solid solutions were synthesized and characterized by X-ray powder diffraction and magnetic measurements. The crystal structure refinements done by the Rietveld profile method show that no significant change of the structure parameters with the erbium concentration occurs. On the basis of DC susceptibility measurements in the 2-300 K range the lowest four crystal field levels have been determined, giving the ground level magnetic moment value of 6.7 μ_B. Results of M(H) studies point to the presence of complex exchange interactions between erbium ions.     

Preparation and investigation of weakly ferromagnetic Fe<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ga<Subscript>x</Subscript>BO<Subscript>3</Subscript> single crystals

Single crystals of iron borate FeBO₃, with part of the iron ions substituted for by Ga diamagnetic ions, were grown through spontaneous crystallization from a melt solution. The chemical composition of the crystals thus prepared, Fe_1?xGa_xBO₃ (x=0, 0.15, 0.25, 0.3), was derived from x-ray microprobe analysis data. Mössbauer spectroscopy and magnetometry were employed to determine the hyperfine interaction parameters (effective magnetic fields at the iron nucleus sites, quadrupole splittings, isomer chemical shifts) and Néel temperatures for these crystals and to derive their temperature behavior.     

Hyperfine interactions measurements on 181Ta probes in HfV2Hx compounds: (0⩽x≲4)

The electric field gradient (EFG) has been measured on ¹⁸¹Ta probe sites in HfV₂H_x alloys (0?x?4) using the time differential perturbed angular correlation technique. One observes that the main component V_zz of the EFG decreases by a factor of 2 for hydrogen concentrations increasing from x = 0 to x = 4 hydrogen atoms/formula. The opposite behavior was observed on ⁵¹V by using the NMR technique. At T = 4.2 K the EFG tensor is non-axially symmetric. The observed asymmetry factor for x = 0 is η = 0.58(3) and it slightly increases to η = 0.70 for x?4. The system is orthorhombic at low temperatures for all x and the experiments suggest that hydrogen would stabilize a tetragonal phase at higher temperatures. The relaxation effects are absent for x = 0 and vanishingly small for x ? 4 but they are observed at intermediate concentrations supporting the idea of a hydrogen ordering for x = 4.     

Growth, optical properties and laser performance of NdxLu1−xVO4 series crystals

Nd_xLu_1−xVO₄ (x = 0, 0.005, 0.02, 0.023, 0.03 and 0.05) series crystals have been grown by the Czochralski method. The results of X-ray powder diffraction experiments show that these crystals belong to the zircon-type structure. The cutoff wavelength of LuVO₄ is 330 nm and the transmittance is about 80% in 540-3010 nm. The functional relation of absorption coefficient α at 808 nm on Nd³⁺-doped concentration N_d in units of atomic % is obtained to be α = 7.649 N_d. The results of Judd-Ofelt analysis show that there is no obvious concentration quenching effect below 3 at.% doped concentrations. The highest output power at 1.06 μm is 1090 mW for Nd_0.02Lu_0.98VO₄ at the pumping power of 6.58 W of a laser diode, the optical-optical conversion efficiency is 16.6% and slope efficiency is 19.4%.     

Growth and characterization of pure and doped organic nonlinear optical single crystal: l-Alanine alaninium nitrate (LAAN)

The pure l-alanine alaninium nitrate (LAAN) single crystals and LAAN crystals doped with lanthanum oxide (La₂O₃), sodium chloride (NaCl), urea (CH₄N₂O), glycine (C₂H₅NO₂) and thiourea (CH₄N₂S) were grown by slow evaporation method. The X-ray diffraction analysis, scanning electron microscopy (SEM), energy dispersive X-ray (EDAX) analysis, UV–vis spectral analysis, dielectric studies and powder SHG measurement are studied systematically. The slight changes in the lattice parameters were observed for the doped crystals compared to pure LAAN crystal. The incorporation of doping into the crystal lattice was confirmed by energy dispersive X-ray analysis. There is no change in the transmission window due to doping and the percentage of transmission in doped samples was found to increase as compared to that of pure LAAN crystal. The dielectric constant of pure crystal was found to be less than that of doped crystals. The AC conductivity was found to increase after doping and with the increase in temperature. A green radiation of 532 nm was observed from the pure and doped LAAN crystals confirming the second harmonic generation (SHG) of the crystals.