Magnetization reversal of ultrathin Fe film grown on Si（111） using iron silicide template

Ultrathin Fe films were epitaxially grown on Si（lll） by using an ultrathin iron silicide film with p（2 × 2） surface reconstruction as a template. The surface structure and magnetic properties were investigated in situ by low energy electron diffraction （LEED）, scanning tunnelling microscopy （STM）, and surface magneto-optical effect （SMOKE）. Polar SMOKE hysteresis loops demonstrate that the Fe ultrathin films with thickness t 〈 6 ML （monolayers） exhibit perpen-dicular magnetic anisotropy. The characters of M-H loops with the external magnetic field at difference angles and the angular dependence of coercivity suggest that the domain-wall pinning plays a dominant role in the magnetization reversal process.[第一段]     

Si(001)表面稀土金属硅化物纳米结构

稀土金属元素的硅化物在n型硅衬底上具有高电导率和低肖特基势垒的特点,在大规模集成的微电子器件领域具有很好的应用价值.文章系统介绍了在Si(001)表面自组装生长的稀土金属硅化物纳米结构的研究进展,较全面地讨论了退火温度、退火时间以及稀土金属表面覆盖度等生长条件对纳米结构生长的影响作用,并在此基础上分析了纳米线、纳米岛的晶化结构,衬底对纳米结构生长的影响,以及纳米结构的演化过程.搞清楚这些内在的生长机理,有助于人们今后实现可严格控制稀土金属硅化物纳米结构的形貌尺寸和分布的自组装生长.此外,文章还介绍了目前人们对稀土金属硅化物纳米线电学性质的研究进展.     

Controlling the width of self-assembled dysprosium silicide nanowires on the Si(001) surface

We present STM data that show that it is possible to use a metal induced 2 × 7 reconstruction of Si(001) to narrow the width distribution of Dy silicide nanowires. This behavior is distinct from the effect of the 7 × 7 reconstruction on the Si(111) surface, where the 7 × 7 serves as a static template and the deposited metal avoids the unit cell boundaries on the substrate. In this case, the 2 × 7 is a dynamic template, and the nanowires nucleate at anti-phase boundaries between 2 × 7 reconstruction domains.     

离子注入和固相外延制备Si1-x-yGexCy半导体薄膜

用等离子体增强化学气相淀积(PECVD)生长了200nm的SiGe薄膜,然后将C离子注入SiGe层,经两步热退火处理制备了Si1-x-yGexCy三元合金半导体薄膜.应用卢瑟福背散射(RBS),傅里叶变换红外光谱(FTIR)和高分辨率x射线衍射(HRXRD)研究了薄膜的结构和外延特性.发现C原子基本处于替代位置,C原子的掺入缓解了SiGe层的压应变 关键词： Si1-x-yGexCy薄膜 离子注入 固相外延     

Variety of iron silicides grown on Si(0 0 1) surfaces by solid phase epitaxy: Schematic phase diagram

We systematically studied the formation of various iron-silicide phases, grown on Si(0 0 1) surfaces by solid phase epitaxy, with scanning tunneling microscopy, low-energy electron diffraction and reflection high-energy electron diffraction. We found and studied the phases of c(2 × 2) islands, rectangle-like islands, elongated islands, layered islands, dome-like islands, eddy and cracked structures, and small clusters. A schematic phase diagram of these phases is successfully summarized against iron coverage at room temperature and subsequent annealing temperature.     

Ion beam triangulation of ultrathin Mn and CoMn films grown on Cu(001)

Total target currents for grazing scattering of keV protons from a crystal target are used to investigate the structure of surfaces and ultrathin films. This current shows pronounced maxima whenever the azimuthal incidence angle coincides with close-packed rows of atoms in the surface and subsurface layers. The real-space method is applied to study monolayer and bilayer films of Mn and of CoMn epitaxially grown on a Cu(001) surface.     

Formation of ultrathin iron silicide layers on the single-crystal silicon surface

The solid-phase synthesis of iron silicides on the Si(100)2 × 1 surface with a 5-ML-thick iron film deposited at room temperature was studied by high-resolution photoelectron spectroscopy with the use of synchrotron radiation. Computer simulation of the measured Si 2p spectra revealed the formation of silicides in this system already under annealing at a temperature of 60°C. The process of formation consists in successive syntheses of three iron silicide phases, more specifically, monosilicide ε-FeSi, metastable disilicide γ-FeSi₂, and disilicide β-FeSi₂. The temperature ranges of existence of these phases were determined. Silicon was found to segregate on the γ-FeSi₂ surface.     

On the characteristics of AlGaN films grown on (111) and (001) Si substrates

High Al-content Al_xGa_1−xN films were deposited on (001) and (111) Si substrates at 1000 °C using high temperature AlN buffer layers. Experimental results show that Al_xGa_1−xN films grown on (111) Si substrates exhibit better crystalline quality than that in the films deposited on (001) Si substrates. Cracks were found in the high Al-content Al_xGa_1−xN/(111) Si samples but they were not observed in the Al_xGa_1−xN films grown on (001) Si substrates having the same film thicknesses and Al compositions. Based upon the results of X-ray diffraction (XRD) and transmission electron microscopy (TEM), it appears that mono-crystalline Al_xGa_1−xN films were achieved on (111) Si substrates while columnar structure was observed in the Al_xGa_1−xN/(001) Si samples. According to the depth profiles of Al_xGa_1−xN/Si samples using secondary ion mass spectroscopic (SIMS) analyses, enhanced Al inter-diffusion in the Al_xGa_1−xN/(001) Si samples was identified. Room temperature (RT) photoluminescence (PL) measurements of the Al_xGa_1−xN (x≦0.10)/(111) Si samples exhibit strong near band edge luminescence. The PL emission linewidth was found to decrease with the decrement of Al-content.     

Temperature dependence of the surface anisotropy of Fe ultrathin films on Cu(001)

We report an experimental approach to separate temperature dependent reversible and irreversible contributions to the perpendicular magnetic anisotropy of Fe films grown at low temperatures on Cu(001) substrates. The surface anisotropy K(S)(T) is found to decrease linearly with temperature, causing a thermally induced spin reorientation into the plane. The irreversible shift of the spin reorientation transition and the coercivity of the iron films are directly correlated to the increasing Fe island size during annealing. The increased coercivity is discussed in terms of domain wall energy inhomogeneities provided by the islands.     

Plastic relaxation anisotropy in epitaxial films grown on miscut Si(001) substrates

A way of calculating the structural parameters of semiconductor epitaxial layers grown on miscut (0 0 1) substrates is developed. It is shown that the difference between the tensor of film elastic strains and the spherical tensor of strains translating the film’s crystal lattice into the substrate’s lattice is a tensor whose components are proportional to X-ray strains. The technique is used to analyze GaAs and Ge_0.2Si_0.8 films grown on (1 1 13) Si substrates. The anisotropy of the degree of plastic relaxation is established for lateral directions perpendicular and parallel to the interfacial steps in the GeSi film. It is proposed that noninteger Miller indices be used to denote the direction and value of the rotation of the film’s crystal lattice with respect to the substrate lattice.     

Si(001)衬底上分子束外延生长Ge0.975Sn0.025合金薄膜

使用低、高温两步法生长的高质量Ge薄膜作为缓冲层,在Si(001)衬底上采用分子束外延法生长出Ge_0.975Sn_0.025合金薄膜.X射线双晶衍射和卢瑟福背散射谱等测试结果表明,Ge_0.975Sn_0.025合金薄膜具有很好的晶体质量,并且没有发生Sn表面分凝.另外,Ge_0.975Sn_0.025合金薄膜在500 ℃下具有很好的热稳定性,有望在Si基光电器件中得到应用. 关键词： GeSn Ge 分子束外延 外延生长     

Observation of spin-polarized surface states on ultrathin bct Mn(001) films by spin-polarized scanning tunneling spectroscopy

We report the observation of a magnetic contrast of up to 20% in the scanning tunneling spectroscopy dI/dV maps obtained with Fe-coated tips on Mn(001) layers grown on an Fe(001) whisker at 370 K. These nanometer resolution microscopy results show that the layers couple antiferromagnetically. By normalizing the dI/dV curves by tunneling probability functions, we found a spin-dependent peak on the body-centered-tetragonal (bct) Mn(001) surface at +0.8 V, whose high spin polarization gives rise to the dI/dV map contrast. Band structure calculations allow one to identify the +0.8 V peak as due to two spin-polarized d(z(2)) surface states.     

Growth of SrTiO3 on Si(001) by hybrid molecular beam epitaxy

We report the heteroepitaxial growth of SrTiO₃ thin films on Si(001) by hybrid molecular beam epitaxy (hMBE). Here, elemental strontium and the metal‐organic precursor titanium tetraisopropoxide (TTIP) were co‐supplied in the absence of additional oxygen. The carbonization of pristine Si surfaces during native oxide removal was avoided by freshly evaporating Sr into the hMBE reactor prior to loading samples. Nucleation, growth and crystallization behavior as well a structural properties and film surfaces were characterized for a series of 46‐nm‐thick SrTiO₃ films grown with varying Sr to TTIP fluxes to study the effect of non‐stoichiometric growth conditions on film lattice parameter and surface morphology. High quality SrTiO₃ thin films with epitaxial relationship (001)SrTiO₃ || (001)Si and [110]SrTiO₃ || [100]Si were demonstrated with an amorphous layer of around 4 nm thickness formed at the SrTiO₃/Si interface. The successful growth of high quality SrTiO₃ thin films with atomically smooth surfaces using a thin film technique with scalable growth rates provides a promising route towards heterogeneous integration of functional oxides on Si. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

LEED analysis of solid phase epitaxy of Si

The LEED technique has been used to study the solid phase epitaxial growth of silicon. The crystalline quality of the film surface, the growth rate and the activation energy have been determined. A comparison of these results with those obtained by other authors has been made.