Synthesis of silica‐supported rhodium carbene complex as efficient catalyst for the addition of phenylboronic acid to aldehydes

Silica‐supported catalytically active functional materials, such as the rhodium(I) carbene complex with 1‐(triethoxysilylpropyl)‐3‐(2,4,6‐trimethylbenzyl)imidazolidine‐2‐ylidine (L), were prepared using the sol–gel method. The complex ( 1 ; COD = 1,5‐cyclooctadiene) RhCl(COD)[1‐(triethoxysilylpropyl)‐3‐(2,4,6‐trimethylbenzyl)imidazolidin‐2‐ylidine] was characterized by conventional spectroscopic methods and elemental analyses and the silica‐supported functional material RhCl(COD)(L) were tested for the catalytic addition of phenylboronic acid to aldehydes. Copyright © 2005 John Wiley & Sons, Ltd.     

Silica‐supported perchloric acid as a recyclable catalyst for efficient trimethylsilyl cyanide addition to aldehydes

HClO₄? SiO₂ (0.6 mol%) acts as a highly effective catalyst for cyanation of various aldehydes to the corresponding O‐trimethylsilyl cyanohydrins, in high yields and short reaction times. Copyright © 2007 John Wiley & Sons, Ltd.     

N‐heterocyclic carbene complexes of Rh(I) and electronic effects on catalysts for 1,2‐addition of phenylboronic acid to aldehydes

1,3‐Diarylsubstituted imidazolinium salts, (NHC‐H)Cl, 3, containing hydrogen or alkyl groups at the 4,5‐positions of the imidazolidine ring, served as precursors to rhodium(I) complexes [RhCl(NHC)COD], 4, which were converted into cis‐[RhCl(NHC)(CO)₂] complexes, 5. All compounds prepared were characterized by elemental analyses, ¹H NMR and ¹³C NMR. The relative σ‐donor/π‐acceptor strength of the NHC ligands was determined by means of IR spectroscopy of 5. The ability of NHCs in 4 to enchance activity was explored in the 1,2‐addition of phenylboronic acid to aldehydes. A good correlation was observed between catalytic activity and the electron‐donating power of the NHC ligands. Copyright © 2010 John Wiley & Sons, Ltd.     

In situ preparation of rhodium/n‐heterocyclic carbene complexes and use for addition of arylboronic acids to aldehydes

The in situ prepared three component system [RhCl(COD)]₂/imidazolidinium salts ( 2, 4 ) and KOBu^t catalyses the addition of phenylboronic acid to sterically hindered aldehydes affording the corresponding arylated secondary alcohols in good yields. Four novel 1,3‐dialkylimidazolidinium ( 2‐4 ) salts as NHC precursors were synthesized from N,N′‐dialkylethylenediamine.     

In situ catalyst improvement in the proline-mediated alpha-amination of aldehydes

Kinetic investigations show that the proline-mediated alpha-amination of aldehydes exhibits autoinductive rate behavior and amplification of product enantiomeric excess. Further experiments highlight the role of product, offering suggestions for the design of catalysts of improved efficiency for such transformations. The unusual characteristics exhibited by these reactions implicate amino acid catalysis in rationalizations of the origin of biological homochirality.     

In situ generated cationic Pd(II)/bipyridine-catalyzed addition of arylboronic acids to N-sulfonyl-arylaldimines

An in situ generated cationic Pd(II)/bipyridine-catalyzed nucleophilic addition of arylboronic acids to N-sulfonyl arylaldimines was developed and optimized, and the reaction was proceeded highly efficiently and conveniently in CH₃NO₂. A series of arylboronic acids and N-sulfonyl arylaldimines were surveyed, and 12 of 13 examples gave 90～96% yields.     

Iridium as a general catalyst for the decarbonylative addition of aldehydes to alkynes

A general catalytic system for the decarbonylative addition reaction of aldehydes with alkynes is developed by using an iridium catalyst system. Both aromatic and aliphatic aldehydes reacted with terminal alkynes efficiently to give the corresponding olefination products in high yields and up to 11:1 E/Z selectivity.     

Application of carbon arc‐generated Mo‐ and W‐based catalyst systems to the ROMP of norbornene

This study focuses on the application of the carbon arc‐generated molybdenum‐ and tungsten‐based catalyst systems, MoCl₅? C and WCl₆? C, to effect ring‐opening metathesis polymerization (ROMP) of bicyclo[2.2.1]hept‐2‐ene (norbornene). The results are compared with those previously obtained by the electrochemically generated MoCl₅? ē? Al? CH₂Cl₂ and WCl₆? ē? Al? CH₂Cl₂ systems. The polymer products are characterized using ¹H and ¹³C NMR, gel permeation chromatography, differential scanning calorimetry and thermo gravimetric analysis. According to NMR spectra analyses, the molybdenum‐based catalyst system produced polynorbornene with ca 48% cis structure whereas tungsten system produced ca 56% cis structure polynorbornene and in both cases the polynorbornene had a blocky distribution. Copyright © 2009 John Wiley & Sons, Ltd.     

Polymer-supported N-heterocyclic carbene-rhodium complex catalyst for the addition of arylboronic acids to aldehydes

A novel polymer-supported N-heterocylic carbene (NHC)-rhodium complex was prepared from chloromethyl polystyrene (CM PS) resin using a simple procedure. This polymer-supported NHC-rhodium complex was used as a catalyst for the addition of arylboronic acids to aldehydes affording arylmethanols in excellent yields.     

Lewis acid catalyzed addition of 2,2,2-trifluorodiazoethane to unactivated aldehydes

Condensations of 2,2,2-trifluorodiazoethane with pentanal, cyclohexancarboxaldehyde and benzaldehyde have been performed in presence of antimony pentachloride or boron trifiuoride. These reactions lead mainly to homologated aldehydes or ketones α substituted by a trifluoromethyl group.     

Camphor-based Schiff base ligand SBAIB: an enantioselective catalyst for addition of phenylacetylene to aldehydes

A series of Schiff base ligands were synthesized from (1R)-camphor. Under the optimal conditions, (+)-SBAIB-a, 10 was found to be an excellent catalyst for the enantioselective addition of phenylacetylene to various aldehydes without utilizing either achiral additives or Ti(O(i)Pr)(4). This approach yielded (R)-propargylic alcohols in extremely high yields (up to 99%) and excellent enantioselectivities (up to 92%). The corresponding (S)-propargylic alcohols were synthesized in good to high enantioselectivities (up to 91%) and excellent yields (up to 99%) using (-)-SBAIB-a, 41.     

Modular amino acids and β‐amino alcohol‐based chiral ligands for enantioselective addition of diethylzinc to aromatic aldehydes

Enantioselective addition of diethylzinc to a series of aromatic aldehydes was developed using a modular amino acids and ${\bf \beta}$ ‐amino alcohol‐based chiral ligand (2R)‐N‐[(1R,2S)‐1‐hydroxy‐1‐phenylpropan‐2‐yl]‐3‐phenyl‐2‐(tosylamino) propanamide ( 1f ) without using titanium complex. The catalytic system employing 15 mol% of 1f was found to promote the addition of diethylzinc (ZnEt₂) to a wide range of aromatic aldehydes with electron‐donating and electron‐withdrawing substituents, giving up to 97% ee of the corresponding secondary alcohol under mild conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

Diphenylprolinol methyl ether: a highly enantioselective catalyst for Michael addition of aldehydes to simple enones

[reaction: see text] Diphenylprolinol methyl ether catalyzes intermolecular Michael addition of simple aldehydes to relatively nonactivated enones with the highest enantioselectivities reported to date (95-99% ee) and significantly lower catalyst loadings than have been typical in this arena.     

Catalytic enantioselective addition of arylboronic acids to N-boc imines generated in situ

The rhodium-catalyzed addition of arylboronic acids to N-Boc imines generated in situ from stable and easily prepared alpha-carbamoyl sulfones has been developed. High enantioselectivities are observed for additions of arylboronic acids with a variety of steric and electronic properties.     

Rh-N-heterocyclic carbene (NHC) complex-catalyzed addition of phenylboronic acid to N-sulfonyl and N-phosphinoyl aldimines

Rh-N-heterocyclic carbene (NHC) complexes were generated in situ from imidazolium salts, [RhCl(cod)](2) and t-BuOK in dioxane. In the presence of a catalytic amount of Rh-NHC complexes, the addition reaction of phenylboronic acid to N-sulfonylarylimines and N-phosphinyolarylimines gave the corresponding amines in high yields.     

The use of bifunctional catalyst systems in the asymmetric addition of alkynylzinc to aldehydes

The bifunctional ligand 2a showed a more enhanced reactivity than that of the corresponding amino alcohol ligand in the asymmetric addition of alkynylzinc to benzaldehyde. The bifunctional ligand 2a can catalyze the addition of phenylacetylene to various types of aldehydes including aromatic aldehydes, aliphatic aldehydes, and α,β-unsaturated aldehydes with high enantioselectivity (81–98% ee). The conditions of this catalytic process are both mild and simple.     

In situ conversion of a Ru metathesis catalyst to an isomerization catalyst

Addition of alcohols and substoichiometric amounts of a base to a metathesis reaction induces conversion of the metathesis-active carbene catalyst to an isomerization-active hydride species.     

Chiral P,N‐ligands for the highly enantioselective addition of diethylzinc to aromatic aldehydes

A new sterically hindered chiral P,N‐ligand was synthesized and successfully applied to copper catalyzed asymmetric addition of diethylzinc to aromatic aldehydes. Various aromatic aldehydes can react smoothly to give the corresponding addition products with good to excellent enantioselectivities, which provides a readily accessible method for the preparation of chiral secondary alcohols.     

Salicylaldehyde based oxazolidines as catalysts for the asymmetric addition of diethylzinc to aldehydes

A series of oxazolidines have been prepared by condensation of N‐isopropyl norephedrine with a variety of salicylaldehyde derivatives. Despite the stereochemical relationship of (1R,2S)‐norephedrine with (1R,2S)‐ephedrine, the resultant oxazolidines 12‐14 were determined to have a stronger stereochemical relationship with (1S,2S)‐pseudoephedrine based oxazolidines. The resultant oxazolidines were used as catalytic ligands in the addition of diethylzinc to several aldehydes. It was determined that the oxazolidine derivative 12 gave the highest yield and a moderate enantioselectivity.     

In situ catalyst systems for ring-opening metathesis polymerization

Several new in situ tungsten catalyst systems for ring-opening metathesis polymerizations (ROMP) by reaction injection molding (RIM) have been developed by adding BF₃ promoter to binary catalyst systems, by using metal hydride cocatalysts, and by altering the ligands on the procatalyst metal center. BF₃ etherates improved catalyst efficiency and reduced induction times for formation of active catalysts from reaction of aryloxytungsten complexes [e.g., (ArO)_y(WX_x)] with organotin hydrides. Coordinatively unsaturated cationic intermediates, such as [(ArO)_yWX_x-1]⁺ BF₃X⁻, are proposed to facilitate formation of the active catalysts. Tougher poly(dicyclopentadiene) (polyDCPD) composites were produced using < 5 wt % of styrene-butadiene block copolymers due to formation of small “shell-core” rubber morphologies when BF₃ promoter was added to the catalyst system. Nonalkylating metal hydrides besides R₃SnH, including (PPh₃)₂CuBH₄, (PPh₃CuH)₆, and Cp₂ZrClH, were shown to be cocatalysts. The optimum 2 : 1 stoichiometric ratio of organotin hydride cocatalyst to tungsten, revealed by BF₃-promoted catalyst systems, and W^V EPR resonances (g ∼ 1.7) observed in the reaction of aryloxytungsten with organotin hydride are consistent with an overall reduction and reoxidation mechanism for formation of the active metathesis catalysts. Some tungsten complexes derived from 9-hydroxyfluorene, 2,2′-(and 4,4′)-biphenols, and 1,4-hydroquinones were found to be very reactive procatalysts, even in the absence of cocatalyst in some cases. These procatalysts also were paramagnetic, characterized by unusual EPR spectra consistent with W^V (g = 1.6–1.9) and “ligand-centered” (g = 2.003) resonances. Valence tautomeric species, analogous to catecholate-semiquinonate complexes, are proposed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3027–3047, 1997