Interaction of pyridine‐ and 4‐hydroxypyridine‐2,6‐dicarboxylic acids with heavy metal ions in aqueous solutions

Interactions between pyridine‐2,6‐dicarboxylic acid and 4‐hydroxypyridine‐2,6‐dicarboxylic acid with Cu(II), Pb(II), and Cd(II) ions were characterized in aqueous solutions (20°C; I = 0.4 (KNO₃)) by means of dc‐polarography. In solutions with excess of ligand, Cu(II), Pb(II), and Cd(II) form 1:2 complexes with the tridentate dianion of pyridine‐2,6‐dicarboxylic acid (dipic²⁻) from weak acid to alkaline solutions. The values of log β₂ for Cu(II), Pb(II), and Cd(II) are 16.1, 11.8, and 11.0, respectively. The complexing ability of pyridine‐2,6‐dicarboxylic acid is higher in acid solutions and lower in alkaline solutions than that of 4‐hydroxypyridine‐2,6‐dicarboxylic acid. This difference is attributed to the OH‐group, which can deprotonate in basic pH. In acid solutions the OH‐group acts as an electron acceptor and reduces the electron donation available to the nitrogen atom in 4‐hydroxypyridine‐2,6‐dicarboxylic acid, whereas in alkaline solutions the OH‐group is deprotonated, and the deprotonated O₋ group acts as an electron donor and increases the coordination ability of the ligand. The triple‐deprotonated anion of 4‐hydroxypyridine‐2,6‐dicarboxylic acid (chel^3‐) forms a stable diligand complex with Cu(II), the stability constant logarithm being 21.5 ± 0.2.© 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:625–632, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10203     

Thiophene‐2,5‐dicarboxylic acid bis‐aryl(alkyl) amides

A base‐catalyzed condensation of diacetamido sulfides [(RNHCOCH₂)₂S)] with glyoxal affording thiophene‐2,5‐dicarboxylic acid bis‐aryl(alkyl)amides has been accomplished under mild conditions. Excellent results were readily obtained when R was a substituted 3‐nitrophenyl, 4‐nitrophenyl, 4‐chlorophenyl group, but the yield was poor when R was cyclohexyl. Unknown compounds were characterized by elemental analyses, IR, ¹H, and ¹³C NMR techniques. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:503–506, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20153     

Chelating properties of poly(N‐acryloyl piperazine) by liquid‐phase polymer‐based retention (LPR) technique

The synthesis of poly(N‐acryloylpiperazine) was carried out by radical polymerization giving a yield of 90%. The polymer was soluble in water and was characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopy, and TGA. The metal ability binding properties for the Ag(I), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II), and Cr(III) metal ions in the aqueous phase were investigated using the liquid‐phase polymer‐based retention (LPR) method. The metal ion interactions with the hydrophilic polymers were determined as a function of pH and filtration factor.     

Schiff base substitute polyphenol and its metal complexes derived from o‐vanillin with 2,3‐diaminopyridine: synthesis,characterization, thermal,and conductivity properties

Poly‐2,3‐bis[(2‐hydroxy‐3‐methoxyphenyl)methylene]diamino pyridine (PHMPMDAP) that a new Schiff base polymer has been synthesized and characterized by spectroscopy, elemental, and thermal analyses techniques. This azomethine polymer was found to form complexes readily with Cu(II), Zn(II), Co(II), Pb(II), and Fe(II). From IR and UV‐Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the polymer to be more stable than the monomer. The structure of the polymer obtained was confirmed by FT‐IR, UV‐Vis, ¹³C‐NMR, and ¹H‐NMR. Characterization was undertaken by TGA, size exclusion chromatography (SEC), and solubility tests. Also, electrical conductivities of PHMPMDAP and polymer–metal complexes are measured by four probe technique. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly(N‐acetyl‐α‐acrylic acid): Synthesis,Characterization and Chelation Properties through Liquid Phase Polymer‐Based Retention Technique

The synthesis and characterization of the water‐soluble poly(N‐acetyl‐α‐acrylic acid) by radical polymerization were carried out. The polymer was characterized by Fourier Transform Infrared (FT‐IR), ¹H NMR and ¹³C NMR spectroscopies, and thermogravimetric analysis (TGA). The metal ion binding properties for the metals Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Hg(II), Cr(III) in the aqueous phase were studied using the liquid‐phase polymer‐based retention technique. The metal ion interactions with the hydrophilic polymer were determined as a function of pH and of the filtration factor. The polychelatogen showed a high affinity for metal ions and higher selectivity for Cr(III) at pH = 3.     

Structurally rigid bis(pyrazolyl)pyridine Zn(II) and Cu(II) complexes: Structures and kinetic studies in ring‐opening polymerization of ε‐caprolactone

Four bis(pyrazolyl)pyridine Zn(II) and Cu(II) carboxylate complexes have been structurally elucidated and used as initiators in the ring‐opening polymerization (ROP) of ε‐carprolactone (ε‐CL). Reactions of bis(3,5‐dimethyl‐pyrazol‐1‐yl)pyridine ( L1 ) with the appropriate Zn(II) and Cu(II) carboxylates afforded the corresponding complexes; [Zn(L1)(C₆H₅COO)₂] ( 1 ), [Zn(L1)(2‐Cl‐C₆H₄COO)₂] ( 2 ), [Zn(L1)(OAc)₂] ( 3 ) and [Cu(L1)(OAc)₂] ( 4 ) in moderate to good yields. Molecular structures of compounds 1 , 2 , 3 confirmed the presence of one tridentate bound ligand L1 in the metal coordination sphere and two carboxylate anions to give five coordination number around Zn(II) and Cu(II) atoms. Complexes 1 , 2 , 3 , 4 initiated the ROP of ε‐CL at 110 °C to give polymers of moderate molecular weights. Kinetic analyses of the ROP reactions indicate pseudo ‐first‐order dependency on ε‐CL monomer and initiator. ¹H NMR and mass spectral data established a coordination insertion mechanistic pathway and behaviour of 1 , 2 , 3 , 4 as initiators in the ROP of ε‐CL. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,structural features and biochemical activity assessment of N,N′‐bis‐(2‐mercaptophenylimine)‐2,5‐thiophenedicarboxaldehyde Schiff base and its Co(II), Ni(II), Cu(II) and Zn(II) complexes

The tetradentate Schiff base ligand (SB), N,N′‐bis‐(2‐mercaptophenylimine)‐2,5‐thiophenedicarboxaldehyde was prepared via condensation of 2,5‐thiophene‐dicarboxaldehyde with 2‐aminothiophenol in a 1:2 molar ratio by conventional method. Additionally, its Co(II), Ni(II), Cu(II) and Zn(II) complexes have been synthesized and fully characterized by elemental analysis, FT‐IR, ¹H NMR, ¹³C NMR, UV–Vis, ESR, ESI‐mass, conductivity and magnetic susceptibility measurements. Spectral studies suggested that, the Schiff base coordinate metal ions through the azomethine N‐ and deprotonated thiol S‐ atoms. Based on UV–Vis absorption and magnetic susceptibility data, tetrahedral geometry was assigned for both Co(II) and Zn(II) complexes, whereas on the other hand, square planar geometry for both Ni(II) and Cu(II) complexes. The Schiff base and its metal complexes were screened for their in vitro antimicrobial activity by minimum inhibitory concentration (MIC) method. Free radical scavenging activity of the novel compounds was determined by elimination of 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) radicals. In addition, the interactions of the free ligand and its complexes with calf thymus DNA (CT‐DNA) were explored using absorption, emission and viscosity measurements techniques.     

Multinuclear magnetic resonance,electrospray ionization time‐of‐flight mass spectral and molecular modelling characterization of lithocholic acid amide esters with various nitrogen heterocycles

¹H, ¹³C and ¹⁵N NMR and electrospray ionization time‐of‐flight mass spectrometric characterizations of five lithocholate esters of piperazine diamides are described. Two of them are cholaphane‐type cyclic structures esterified with 2,2′‐bipyridine‐4,4 ′ ‐ and pyridine‐2,6‐dicarboxylic acid and the other three esters are open structures comprising two or four lithocholyl residues. The conformational preferences of the dimeric congeners were examined by using molecular modelling and variable‐temperature ¹H NMR techniques. Copyright © 2003 John Wiley & Sons, Ltd.     

Preparation,Structural Characterization,and Antifungal Activities of Complexes of Group 12 Metals with 2‐Acetylpyridine‐ and 2‐Acetylpyridine‐N‐oxide‐4N‐phenylthiosemicarbazones

Reaction of group 12 metal dihalides in ethanolic media with 2‐acetylpyridine ⁴N‐phenylthiosemicarbazone ( H4PL ) and 2‐acetylpyridine‐N‐oxide ⁴N‐phenylthiosemicarbazone ( H4PLO ) afforded the compounds [M(H4PL)X₂] (X = Cl, Br, M = Zn, Cd, Hg; X = I, M = Zn, Cd) ( 1–8 ), [Hg(4PL)I]₂ ( 9 ) and [M(H4PLO)X₂] (X = Cl, Br, I, M = Zn, Cd, Hg) ( 10–18 ). H4PL , H4PLO and their complexes were characterized by elemental analysis and by IR and ¹H and ¹³C NMR spectroscopy (and the cadmium complexes by ¹¹³Cd NMR spectroscopy), and H4PL , H4PLO , ( 5 · DMSO) and ( 9 ) were additionally studied by X‐ray diffraction. H4PL is N,N,S‐tridentate in all its complexes, including 9 , in which it is deprotonated, and H4PLO is in all cases O,N,S‐tridentate. In all the complexes, the metal atoms are pentacoordinate and the coordination polyhedra are redistorted tetragonal pyramids. In assays of antifungal activity against Aspergillus niger and Paecilomyces variotii, the only compound to show any activity was [Hg(H4PLO)I₂] ( 18 ).     

Synthesis,characterization and solid‐phase extraction properties of novel bis(diazo‐azomethine) ligands supported on mesoporous silica

The novel mesoporous silica‐supported bis(diazo‐azomethine) compounds have been synthesized and characterized successively. In the first step, 1,3‐phenylenedimethanamine and 4,4′‐diaminodiphenylmethane were diazotized, and the obtained bis(diazonium) cations were coupled with 2,4‐dihydroxybenzaldehyde. The synthesized bis(diazo‐carbonyl) compounds, 5,5′‐((1,3‐phenylenebis(methylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A1) and 5,5′‐((methylenebis(4,1‐phenylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A2) were chemically supported on amino‐modified silica‐gel (as L1 and L2). Elemental analysis, liquid chromatography‐mass spectroscopy, liquid‐phase NMR (¹H and ¹³C) and solid‐phase NMR (CP‐MAS ²⁹Si and ¹³C), FT‐IR, TG/DTA, scanning electron microscopy and energy‐dispersive X‐ray spectroscopy techniques were used for characterizations of all the synthesized compounds. The syringe and batch techniques were applied for the solid‐phase extraction properties of Pb(II), Cu(II), Cd(II) and Cr(III) ions using an inductively coupled plasma‐atomic emission spectroscopy instrument. The recoveries of Pb(II), Cu(II), Cd(II) and Cr(III) ions have been achieved to 95–99% with the (RSDs) of ± 2–3% in optimum conditions.     

Synthesis,characterization, anti‐inflammatory and analgesic activity of transition metal complexes of 3‐[1‐(2‐hydroxyphenyl) ethylideamino]‐2‐phenyl‐3,4‐dihydroquinazolin‐4(3H)‐one

A new quinazolinone derivative, 3‐[1‐(2‐hydroxyphenyl)ethylideamino]‐2‐phenyl‐3,4‐dihydroquinazolin‐4(3H)‐one ( LH ) was synthesized by the condensation of 2‐hydroxyacetophenone‐2‐aminobenzoylhydrazone and benzaldehyde. The cyclization to form 1,2‐dihydroquinazolinone was confirmed by IR, 1D and 2D HETCOR studies. Coordination compounds of Co(II), Ni(II), Cu(II) and Zn(II) of LH were synthesized and characterized using various physico‐chemical studies like stoichiometric, conductivity, magnetic moment measurements and spectral techniques such as IR, NMR, UV‐vis and EPR spectroscopy. The elemental analysis and thermal studies suggested a general stoichiometry [M(HEPDQ)Cl] for all the complexes. A four‐coordinate geometry was assigned to all the complexes. The complexes along with the parent ligand were screened for their anti‐inflammatory activity, using carrageenan‐induced rat paw edema, and for their analgesic activity by Eddy's hot plate method. The activity of the ligand was enhanced on complexation with metal ions. This enhanced activity was attributed to the increased lipophilic nature of the complexes. Notable anti‐inflammatory activity was observed for Ni(II), Cu(II) and Zn(II) complexes. The analgesic activity of the ligand was greater than the standard at 60 min. and at a 10 mg kg⁻¹ dose, whereas the activity of Ni(II) and Cu(II) complexes at 10 mg kg⁻¹ dose was comparable with the standard used. Copyright © 2011 John Wiley & Sons, Ltd.     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Solid‐State NMR investigations of anhydrous proton‐conducting acid–base poly(acrylic acid)– poly(4‐vinyl pyridine) polymer blend system: A study of hydrogen bonding and proton conduction

NMR studies of the structure and dynamics of a system composed of the acidic polymer poly(acrylic acid) (PAA) and the basic polymer poly(4‐vinyl pyridine) (P4VP) are presented. This system aims at the application of anhydrous proton‐conducting membranes that can be used at elevated temperatures at which the proton conduction of hydrated membranes breaks down. The ¹H NMR measurements have been preformed under fast magic angle spinning (MAS) conditions to achieve sufficient resolution and the applied ¹H NMR methods vary from simple ¹H MAS to double‐quantum filtered methods and two‐dimensional ¹H double‐quantum spectroscopy. The dynamic behavior of the systems has been investigated via variable temperature ¹H MAS NMR. ¹³C cross‐polarization MAS NMR provides additional aspects of dynamic and structural features to complete the picture. Different types of acidic protons have been identified in the studied PAA‐P4VP systems that are nonhydrogen‐bonded free acidic protons, hydrogen‐bonded dicarboxylic dimers, and protons forming hydrogen bonds between carboxylic protons and ring nitrogens. The conversion of dimer structures in dried PAA to free carboxylic acid groups is accomplished at temperatures above 380 K. However, the stability of hydrogen‐bonding strongly depends on the hydration level of the polymer systems. The effect of hydration becomes less apparent in the complexes. An inverse proportionality between hydrogen‐bonding strength and proton conduction in the PAA‐P4VP acid–base polymer blend systems was established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 138–155, 2009     

New Transition and Actinide Metal Complexes of 2‐Carboxy‐phenylhydrazo‐Benzoylacetone Ligand: Synthesis,Characterization and Biological Study

A new series of binary mononuclear complexes were prepared from the reaction of the hydrazone ligand, 2-carboxyphenylhydrazo-benzoylacetone (H2L), with the metal ions, Cd(II), Cu(II), Ni(II), Co(II), Th(IV) and UO2(VI). The binary Cu(II) complex of H2L was reacted with the ligands 1,10-phenanthroline or 2-aminopyridine to form mixed-ligand complexes. The binary complexes of Cu(II) and Ni(II) are suggested to have octahedral configurations. The Cd(II) and Co(II) complexes are suggested to have tetrahedral and/or square-planar geometries, respectively. The Th(IV) and UO2(VI) complexes are suggested to have octahedral and dodecahedral geometries, respectively. The mixed-ligand complexes have octahedral configurations. The structures of all complexes and the corresponding thermal products were elucidated by elemental analyses, conductance, IR and electronic absorption spectra, magnetic moments, 1H NMR and TG-DSC measurements as well as by mass spectroscopy. The ligand and some of the metal complexes were found to activate the enzyme pectinlyase.     

New polyphenylene‐g‐polystyrene and polyphenylene‐g‐polystyrene/poly(ε‐caprolactone) copolymers by combined controlled polymerization and cross‐coupling processes

1,4‐Dibromo‐2‐(bromomethyl)benzene and 1,3‐dibromo‐5‐(bromomethyl)benzene were used as initiators in the atom transfer radical polymerization of styrene in conjunction with CuBr/2,2′‐bipyridine as a catalyst. The resulting polystyrene (PSt)‐based macromonomers, possessing at one end a 2,5‐dibromophenylene or 3,5‐dibromophenylene moiety, were used in combination with 2,5‐dihexylbenzene‐1,4‐diboronic acid for Suzuki coupling in the presence of Pd(PPh₃)₄ as a catalyst or with the system NiCl₂/2,2′‐bipyridine/triphenylphosphine/Zn for Yamamoto polymerization. Polyphenylenes (PPs) with PSt chains as substitution groups were obtained. The same macromonomers were used in Yamamoto copolycondensation reactions, in combination with a poly(ε‐caprolactone) (PCL) macromonomer, and this resulted in PPs with PSt/PCL side chains. The obtained PPs had good solubility properties in common organic solvents at room temperature similar to those of the starting macromonomers. The new polymers were characterized with ¹H (¹³C) NMR, IR, and gel permeation chromatography. The optical properties of the polymers were monitored with UV and fluorescence spectroscopy. The thermal behaviors of the macromonomers and final PPs were investigated with differential scanning calorimetry and compared. The morphology of PPs containing PSt and PCL blocks was characterized with atomic force microscopy, and a microphase‐separated layered morphology was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 879–896, 2005     

Transition metal complexes based on 2,4-dihydroxyisophthalic anhydride and its functionalized derivative

Oligomeric complex compounds of Cu(II), Ni(II), Mn(II), Zn(II), and Cd(II) with 2,4-dihydroxyisophthalic aldehyde and its bis-hydrazone on the basis of 4-pyridinecarboxylic acid hydrazide are prepared. Probable structures of the complexes are proposed, based on the results of physico-chemical investigations by the methods of IR and ¹H NMR spectroscopy, magnetochemistry and molecular weight determining by Rast’s method.     

Ring‐Opening and polymerization of 1‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotrisiloxane

1‐[2′‐(Heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotetrasiloxane ( II ) was prepared from 1‐[2′‐(methyldichlorosilyl)ethyl]‐1,3,3,5,5,7,7‐heptaphenylcyclotetrasiloxane ( I ) and tetramethyldisiloxane‐1,3‐diol. Acid‐catalyzed ring‐opening of II in the presence of tetramethyldisiloxane gave 1,9‐dihydrido‐5‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( III ) and 1,9‐dihydrido‐3‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( IV ). Both acid‐ and base‐catalyzed ring‐opening polymerization of II gives highly viscous, transparent polymers. The structures of I – IV and polymers were determined by UV, IR, ¹H, ¹³C, and ²⁹Si NMR spectroscopy. In addition, molecular weights obtained by GPC and NMR end group analysis were confirmed with mass spectrometry. On the basis of ²⁹Si NMR spectroscopy, the polymers appear to result exclusively from ring‐opening of the cyclotrisiloxane ring. No evidence for ring‐opening of the cyclotetrasiloxane ring was observed. Polymer properties were determined by DSC and TGA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 137–146, 2006     

Coordination of ZnII,CdII, and HgII by 2‐Pyridineformamide‐3‐piperidyl‐thiosemicarbazone

Sodium in dry methanol reduces 2‐cyanopyridine in the presence of 3‐piperidylthiosemicarbazide and produces 2‐pyridine‐formamide‐3‐piperidylthiosemicarbazone, HAmpip. Complexes with zinc(II), cadmium(II), and mercury(II) have been prepared and characterized by elemental analyses and spectroscopic techniques. In addition, the crystal structures of [Zn(Ampip)₂], [Zn(Ampip)(Oac)]₂, [Cd(HAmpip)Cl₂]·(CH₃)₂SO, [Cd(HAm‐pip)Br₂] · (CH₃)₂SO, [Cd(HAmpip)I₂]·(CH₃)₂SO, [Cd(Ampip)₂] and [Hg(HAmpip)Br₂]·(CH₃)₂SO have been solved. Coordination of the anionic and neutral thiosemicarbazone ligand is via the pyridyl nitrogen, imine nitrogen and thiolato/thione sulfur atom, respectively. In [Zn(Ampip)(OAc)]₂ one of the bridging acetato ligands has monodentate coordination and the other bridges in a bidentate manner. ¹¹³Cd NMR studies were carried out on the [Cd(HAmpip)X₂](X = Cl, Br or I) and [Cd(Ampip)(OAc)]₂ complexes. The ¹¹³Cd chemical shifts are affected by the halogen and range from 411 to 301 ppm, and the spectrum of [Cd(Ampip)(OAc)]₂ shows two signals at 450 and 251 ppm. The ¹⁹⁹Hg NMR spectrum of [Hg(HAmpip)Cl₂] also is discussed.     

Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

Synthesis and characterization of the complexes of some transition metals with 2-acetyl pyridine (N-benzoyl) glycyl hydrazone

Complexes of Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) with 2-acetyl pyridine (N-benzoyl) glycyl hydrazone(2-ApBzGH) have been synthesized and characterized by elemental analyses, molar conductances, magnetic susceptibility, IR, electronic, ESR,¹H,¹³C and¹¹³Cd NMR spectral and X-ray diffraction studies. IR and NMR data suggest the tridentate nature of the ligand coordinating as a neutral species in the addition complexes and as a uninegative species in the deprotonated complexes. The presence of more than one isomer of the ligand has been established by¹H NMR spectra of the ligand and complexes recorded over the 298–396 K range. The X-ray powder diffraction patterns of [Cd(2-ApBzGH)Cl]Cl and [Cu(2-ApBzGH)Cl(H₂O)₂]Cl are indexed for orthorhombic and tetragonal crystal systems respectively.