Synthesis and biological activity of novel N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines

A series of new N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines were synthesized by the condensation reaction of β‐triphenylgermyl propanoic acid with N‐benzoyl‐N‐tert‐butylhydrazines in good yields by using N,N′‐dicyclohexylcorbodiimide as dehydrating agent. These title compounds were evaluated for molting hormone mimicking activity. The results of bioassay showed that the compounds exhibit moderate larvicidal activity, and toxicity assays indicated that the title compounds can induce a premature, abnormal and lethal larval molt. We found that the title compounds possess potential anticancer activities in vitro. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of polymer‐iridium complex and its electroluminescent characteristics

A π‐conjugated polymer‐iridium complex containing the ligand in the main chain was synthesized by the Suzuki coupling method, and was applied to organic light‐emitting devices (OLEDs) as the emitter material. The polymer‐iridium complex showed red photoluminescence and electroluminescence with the maximum external quantum efficiency of ca. 3% by using 4,4′‐N,N′‐dicarbazole‐biphenyl and 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole blended into the polymer emitter layer. Copyright © 2005 John Wiley & Sons, Ltd.     

New 3,3′[2,2′‐oxy‐bis‐(oxazaborolidine)]‐ethylenes. Structural studies by NMR,X‐ray,and quantum chemistry methods

3,3′‐[2,2′‐Oxy‐bis‐(4S‐methyl, 5R‐phenyl‐1,3,2‐oxazaborolidine)]ethylene ( 4a ) and 3,3′‐[2, 2′‐oxy‐(4S‐methyl‐5R‐phenyl‐1,3,2‐oxazaborolidine)‐ (1,3,2‐benzoxazaborolidine)]ethylene ( 4b ) were synthesized by the reaction of N,N′‐bis‐[(1R,2S)‐norephedrine]oxalyl ( 3a ) or N,N′‐[((1R,2S)‐norephedrine, o‐hydroxyphenylamine]oxalyl ( 3b ) with BH₃‐THF. The molecular structure of these compounds was established by NMR and infrared spectroscopy. The molecular geometry for 4 was studied by means of theoretical methods, resulting in structures that were in total agreement with those obtained by spectroscopy data and X‐ray diffraction. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:513–519, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20151     

Alkylgermasesquioxide derivatives of tert‐butyl‐diacylhydrazines

N‐tert‐Butyl‐N‐benzoylhydrazine was synthesized by a new method. Its condensation and the condensation of its N,N′‐isomer with 3‐(trichlorogermyl)propionyl chloride provided N‐tert‐butyl‐N′‐(3‐trichlorogermyl)propionyl‐N‐benzoylhydrazine or its N,N,N′‐isomer, respectively, in good yields. Subsequent hydrolysis of the trichlorogermyl compounds using saturated sodium carbonate yielded the corresponding germasesquioxide derivatives that have good solubility in organic solvents. The structures of these compounds were confirmed by ¹H NMR, IR, MS, and elemental analysis. The hydrolysis of organogermanium trichloride was studied, and the elimination of HGeCl₃ was observed when the basicity was too high (pH > 10). © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:293–297, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10174     

Synthesis and biological activity of novel N‐tert‐butyl‐N,N′‐substitutedbenzoylhydrazines containing 2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl

In a search for new insect growth regulators with unusual biological properties and different activity spectrum, we thought that the preservation of the bioactive unit and the introduction of 2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl in N‐tert‐butyl‐N,N′‐dibenzoylhydrazine would enhance their larvicidal activities to a significant degree. Therefore, we designed and synthesized N′‐tert‐butyl‐N′‐[2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl]‐N‐benzoylhydrazine and analogs by two procedures. These novel compounds were characterized by elemental analyses, IR, and ¹H NMR. At the same time, N‐tert‐butyl‐N‐substitutedbenzoylhydrazines were prepared by a new method, and some reactions involved were studied. The preliminary results indicate that some compounds have inhibitory effects against plant pathogenetic bacteria such as early blight of tomato. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of triblock copolymers based on two isomer acrylate monomers by atom transfer radical polymerization

The syntheses of triblock copolymers by the atom transfer radical polymerization of tert‐butyl and iso‐butyl acrylates as inner blocks with cyclohexyl methacrylate as outer blocks are reported. The living behavior and blocking efficiency of these polymerizations were investigated in each case. The use of difunctional macroinitiators led to ABA triblock copolymers with narrow polydispersities and controlled number‐average molecular weights. These copolymers were prepared from bromo‐terminated macroinitiators of poly(tert‐butyl acrylate) and poly(iso‐butyl acrylate), with copper chloride/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalytic system, at 40 °C in 50% (v/v) toluene solutions. The block copolymers were characterized with size exclusion chromatography and ¹H NMR spectroscopy. Differential scanning calorimetry measurements were performed to reveal the phase segregation. The glass transition of the inner block was not clearly detected, with the exception of the copolymer synthesized with the longest poly(iso‐butyl acrylate) macroinitiator length. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4828–4837, 2005     

5‐Hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate: diastereoselectivity of the Mukaiyama crossed‐aldol‐type reaction

The title compounds, rac‐(1′R,2R)‐tert‐butyl 2‐(1′‐hydroxyethyl)‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₁₇H₂₀N₂O₆, (I), rac‐(1′S,2R)‐tert‐butyl 2‐[1′‐hydroxy‐3′‐(methoxycarbonyl)propyl]‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₂₀H₂₄N₂O₈, (II), and rac‐(1′S,2R)‐tert‐butyl 2‐(4′‐bromo‐1′‐hydroxybutyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₁₃H₂₀BrNO₄, (III), are 5‐hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydropyrrole‐1‐carboxylate. In all three compounds, the tert‐butoxycarbonyl (Boc) unit is orientated in the same manner with respect to the mean plane through the 2‐oxo‐2,5‐dihydro‐1H‐pyrrole ring. The hydroxyl substituent at one of the newly created chiral centres, which have relative R,R stereochemistry, is trans with respect to the oxo group of the pyrrole ring in (I), synthesized using acetaldehyde. When a larger aldehyde was used, as in compounds (II) and (III), the hydroxyl substituent was found to be cis with respect to the oxo group of the pyrrole ring. Here, the relative stereochemistry of the newly created chiral centres is R,S. In compound (I), O—H...O hydrogen bonding leads to an interesting hexagonal arrangement of symmetry‐related molecules. In (II) and (III), the hydroxyl groups are involved in bifurcated O—H...O hydrogen bonds, and centrosymmetric hydrogen‐bonded dimers are formed. The Mukaiyama crossed‐aldol‐type reaction was successful when using the 2‐nitrophenyl‐substituted hydroxypyrrole, or the unsubstituted hydroxypyrrole, and boron trifluoride diethyl ether as catalyst. The synthetic procedure leads to a syn configuration of the two newly created chiral centres in all three compounds.     

Hydrogen‐bonding network of N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediammonium dichloride

The title salt, C₁₈H₄₆N₂O₂Si₂²⁺·2Cl⁻, has been synthesized by reaction of N,N′‐bis(2‐hydroxyethyl)ethylenediamine with tert‐butyldimethylsilyl chloride. The zigzag backbone dication is located across an inversion centre and the two chloride anions are related by inversion symmetry. The ionic components form a supramolecular two‐dimensional network via N—H...Cl hydrogen bonding, which is responsible for the high melting point compared with the oily compound N,N′‐bis[2‐(tert‐butyldimethylsiloxy)ethyl]ethylenediamine.     

The achiral tetrapeptide Z‐Aib‐Aib‐Aib‐Gly‐OtBu

The title achiral peptide N‐benzyloxycarbonyl‐α‐aminoisobutyryl‐α‐aminoisobutyryl‐α‐aminoisobutyrylglycine tert‐butyl ester or Z‐Aib‐Aib‐Aib‐Gly‐OtBu (Aib is α‐aminoisobutyric acid, Z is benzyloxycarbonyl, Gly is glycine and OtBu indicates the tert‐butyl ester), C₂₆H₄₀N₄O₇, is partly hydrated (0.075H₂O) and has two different conformations which together constitute the asymmetric unit. Both molecules form incipient 3₁₀‐helices. They differ in the relative orientation of the N‐terminal protection group and at the C‐terminus. There are two 4→1 intramolecular hydrogen bonds.     

SO2‐Extrusion of an 8‐thiabicylo[3.2.1]octa‐2,6‐diene 8,8‐dioxide and rearrangement of the resulting cycloheptatriene

The reaction of 3,4‐di‐tert‐butyl‐thio‐phene 1‐oxide ( 8 ) with tetrachlorocyclopropene provided 6,7‐di‐tert‐butyl‐2,3,4,4‐tetrachloro‐8‐thia‐bicylo[3.2.1]octa‐2,6‐diene 8‐oxide ( 10 ), which was oxidized to the corresponding 8,8‐dioxide 16 by m‐chloroperbenzoic acid. The thermolysis of 16 in refluxing chlorobenzene, xylene, or octane gave 5‐tert‐ butyl‐1,2‐dichloro‐3‐[(1,1‐dich‐loro‐2,2‐dimethyl)‐pro‐ pyl]‐benzene ( 18 ) with extrusion of SO₂ and 2‐tert‐butyl‐4,5,6‐trichloro‐9,9‐dimethylbicyclo[5.2.0]nona‐1,3,5‐triene ( 19 ) with extrusion of SO₂ and HCl in 73–78% combined yields. On the other hand, the thermolysis of 16 in the presence of triethylamine gave 19 as the sole product in 98% yield. A mechanism that involves the initial formation of 4,5‐di‐tert‐butyl‐1,2,7,7‐tetrachlorocycloheptatriene ( 17 ) is proposed to ex‐ plain the observed products. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:132–222, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20079     

The absolute configuration of (2S,4S)‐ and (2R,4R)‐2‐tert‐butyl‐4‐methyl‐3‐(4‐tolyl­sulfon­yl)‐1,3‐oxazolidine‐4‐carbaldehyde

The title enanti­omorphic compounds, C₁₆H₂₃NO₄S, have been obtained in an enanti­omerically pure form by crystallization from a diastereomeric mixture either of (2S,4S)‐ and (2R,4S)‐ or of (2R,4R)‐ and (2S,4R)‐2‐tert‐butyl‐4‐methyl‐3‐(4‐tolyl­sulfon­yl)‐1,3‐oxazolidine‐4‐carbaldehyde. These mixtures were prepared by an aziridination rearrangement process starting with (S)‐ or (R)‐2‐tert‐butyl‐5‐methyl‐4H‐1,3‐dioxine. The crystal structures indicate an envelope conformation of the oxazolidine moiety for both compounds.     

Synthesis and properties of novel aromatic polyhydrazides and poly(amide–hydrazide)s based on the bis(ether benzoic acid)s from hydroquinone and substituted hydroquinones

4,4′‐(1,4‐Phenylenedioxy)dibenzoic acid as well as the 2‐methyl‐, 2‐tert‐butyl‐, or 2‐phenyl‐substituted derivatives of this dicarboxylic acid were synthesized in two main steps from p‐fluorobenzonitrile and hydroquinone or its methyl‐, tert‐butyl‐, or phenyl‐substituted derivatives. Polyhydrazides and poly(amide–hydrazide)s were prepared from these bis(ether benzoic acid)s or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, or p‐aminobenzoyl hydrazide by means of the phosphorylation reaction or low‐temperature solution polycondensation. Most of the hydrazide polymers and copolymers are amorphous and readily soluble in various polar solvents such as N‐methyl‐2‐pyrrolidone (NMP) and dimethyl sulfoxide. They could be solution‐cast into transparent, flexible, and tough films. These polyhydrazides and poly(amide–hydrazide)s had T_gs in the range of 167–237°C and could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazole)s and poly(amide–1,3,4‐oxadiazole)s approximately in the region of 250–350°C, as evidenced by the DSC thermograms. All the tert‐butyl‐substituted oxadiazole polymers and those derived from isophthalic dihydrazide were organic soluble. The thermally converted oxadiazole polymers exhibited T_gs in the range of 208–243°C and did not show significant weight loss before 450°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1169–1181, 1999     

New Optically Active Bis‐Heterocycles Derived from (S)‐Proline

Enantiomerically pure bis‐heterocycles containing a (S)‐proline moiety have been prepared starting from (S)‐N‐benzylprolinehydrazide ( 2b ). The reactions with isothiocyanates or butyl isocyanate in refluxing MeOH led to the corresponding thiosemicarbazide 5 and semicarbazide 9 with a N‐benzylprolinoyl residue. The structure of the tert‐butyl derivative 5d was established by X‐ray crystallography. Base‐catalyzed cyclization of 5 and 9 led to (S)‐3‐(pyrrolidin‐2‐yl)‐1H‐1,2,4‐triazole‐5(4H)‐thiones 6 and the corresponding 5(4H)‐one 8 , respectively, whereas, in concentrated H₂SO₄, compounds 5 undergo cyclization to give (S)‐5‐amino‐2‐(pyrrolidin‐2‐yl)‐1,3,4‐thiadiazoles 7 . Furthermore, 2b reacted with hexane‐2,5‐dione in boiling ⁱPrOH to yield the (S)‐N‐(2,5‐dimethylpyrrol‐1‐yl)prolinamide 10 . In the case of the bis‐heterocycle 8 , treatment with HCOONH₄ and Pd/C in MeOH gave the debenzylated product 12 .     

Polymerization of n‐phenyl maleimide by lanthanide complexes

N‐Phenyl maleimide (N‐PMI) was successfully polymerized by divalent rare‐earth complexes (ArO)₂Sm(THF)₄ (ArO = 2,6‐di‐tert‐butyl‐4‐methyl phenoxo‐; THF = tetrahydrofuran) and (Ar′O)₂Ln(THF)₃ (Ar′O = 2,6‐di‐tert‐butyl phenoxo‐; Ln = Sm, Yb, or Eu). The central metals greatly affected the reactivity, and the reactivity order was Sm(II) > Yb(II) > Eu(II). The activity of (Ar′O)₂Sm(THF)₃ was higher than that of (ArO)₂Sm(THF)₄. The polymerization yields were higher in THF than in other solvents, and the maximum yields were obtained around 25 °C. A proposed mechanism is discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3966–3972, 2005     

Enhanced redox stability and electrochromic properties of aromatic polyamides based on N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new bis(triphenylamine)‐type dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was prepared by a well‐established procedure and led to a new family of redox‐active aromatic polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenylphenylenediamine (TPPA) segments. The resulting polyamides were amorphous with good solubility in many organic solvents, and most of them could be solution cast into flexible polymer films. The polyamides exhibited high thermal stability with glass‐transition temperatures in the range of 247–293 °C and 10% weight‐loss temperatures in excess of 500 °C. They showed well‐defined and reversible redox couples during oxidative scanning, with a strong color change from a colorless or pale yellowish neutral form to green and blue oxidized forms. They had enhanced redox stability and electrochromic performance when compared with the corresponding analogs without tert‐butyl substituents on the TPPA unit. The polyamide with TPPA units in both the diacid and diamine components shows multicolored electrochromic behavior. A polyamide containing both the cathodic coloring anthraquinone chromophore and the anodic coloring TPPA chromophore has the ability to show red, green, and blue states, toward single‐component RGB electrochromics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

tert‐Butyl Iodide Mediated Reductive Fischer Indolization of Conjugated Hydrazones

A novel reductive Fischer indolization of readily available N‐aryl conjugated hydrazones with tert‐butyl iodide has been developed. In this reaction, tert‐butyl iodide is used as anhydrous HI source, and the generated HI acts as a Brønsted acid and a reducing agent. This operationally simple method allows access to various indole derivatives. Furthermore, the procedure can be applied to the synthesis of biologically active compounds.     

Das erste Oxatetraphospholan, (PBut)4O

Contributions to the Chemistry of Phosphorus. 244. The First Oxatetraphospholane, (PBu^t)₄O Under suitable conditions, the reaction ot tri‐tertbutylcyclotriphosphane, (PBu^t)₃, with di‐tert‐butylperoxide gives rise to a mixture of 2,3,4,5‐tetra‐tert‐butyl‐1,2,3,4,5‐oxatetraphospholane, (PBu^t)₄O ( 1 ), and 1,2‐di‐tert‐butyl‐1,2‐di‐tert‐butoxidiphosphane, [Bu^t(Bu^tO)P]₂ ( 2 ). Both compounds have been isolated in the pure state. The oxatetraphospholane 1 is a constitutional isomer of 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, which has been reported recently [1]. The corresponding reaction of tetra‐tert‐butylcyclotetraphosphane furnishes only small amounts of 1 because of the kinetic stability of (PBu^t)₄. The diphosphane 2 is presumably a secondary product of primarily formed oxocyclotetraphosphanes (PBu^t)₄O_1–4. The NMR parameters of 1 and 2 are reported and discussed.     

Novel Dinuclear Redox‐isomeric Complexes with a Tetrapodal Pyridine‐based Ligand

Tris‐o‐semiquinonato cobalt complexes react with a tetrapodal pyridine‐derived ligand to form dinuclear cobalt compounds of general formula (OMP)[CoQ₂]₂, where OMP = 2,2′‐(pyridine‐2,6‐diyl)bis(N¹,N¹,N³,N³‐tetramethylpropane‐1,3‐diamine), Q = mono‐ or dianion of 3,6‐di‐tert‐butyl‐o‐benzoquinone (complex 1 ) and it derivatives: 3,6‐di‐tert‐butyl‐4,5‐N,N′‐piperazino‐o‐benzoquinone (complex 2 ), and 3,6‐di‐tert‐butyl‐4‐Cl‐o‐benzoquinone (complex 3 ). Single crystal X‐ray crystallography of 1 and 3 indicates two bis‐quinonato cobalt units bound by an OMP ligand, which acts as a bridge. Each central cobalt atom is chelated by one N¹,N¹,N³,N³‐tetramethylpropane‐1,3‐diamine and two o‐quinonato fragments. The nitrogen atom of the pyridine ring is uncoordinated. All complexes were characterized by NIR‐IR and EPR spectroscopy, precise adiabatic vacuum calorimetry, and by variable‐temperature magnetic susceptibility measurements. All data indicate a reversible thermally driven redox‐isomeric (valence tautomeric) transformation in the solid state for all complexes.     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Synthesis of starlike PtBA‐g‐PEO amphiphilic graft copolymer via highly efficient Cu‐catalyzed SET‐NRC reaction at ambient temperature

Two new amphiphilic star graft copolymers bearing hydrophobic poly(tert‐butyl acrylate) backbone and hydrophilic poly(ethylene oxide) (PEO) side chains with different molecular weights were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization and single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction under mild conditions. RAFT homopolymerization of tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate was mediated by a four‐armed chain transfer agent in a controlled way to afford a well‐defined starlike backbone with a narrow molecular weight distribution (M_w/M_n = 1.26). The target poly(tert‐butyl acrylate)‐g‐PEO (PtBA‐g‐PEO) star graft copolymers were synthesized by SET‐NRC reaction between Br‐containing PtBA‐based starlike backbone and PEO end functionalized with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group using copper/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalytic system at ambient temperature via grafting‐onto strategy. The critical micelle concentration values of the obtained amphiphilic star graft copolymers in aqueous media and brine were determined by fluorescence probe technique using pyrene as probe. Diverse micellar morphologies were formed by varying the content of hydrophilic PEO segment as well as the initial concentration of stock solution. In addition, poly(acrylic acid)‐g‐PEO double hydrophilic star graft copolymers were obtained by selective acidic hydrolysis of hydrophobic PtBA starlike backbone without affecting PEO side chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010