Macroporous cross‐linked organic polymer based on N‐acryloxysuccinimide (NAS) and ethylene dimethacrylate (EDMA) was prepared inside 75 µm id fused silica capillary as a functionalizable monolithic stationary phase for chromatographic applications. Succinimide groups on the monolith surface provide reactive sites able to react readily through standard electrophile–nucleophile chemistry. Propargylamine was used to prepare alkyne functionalized poly(NAS‐co‐EDMA). Onto this azido‐reactive polymer surface was grafted β‐cyclodextrin (CD) via a triazole ring utilizing the copper(I)‐catalyzed 1,3‐dipolar cyclo‐addition reaction. Chemical characterization was performed in situ after each synthetic step by means of Raman spectroscopy. Good enantioseparations of flavanone enantiomers, chosen as test chiral compound, were achieved under reversed phase conditions by both capillary electrochromatography and nano‐liquid chromatography (nano‐LC) techniques. These results demonstrate the potentiality and usefulness of click chemistry in the preparation of β‐CD containing chiral organic polymer monolith.
Anionic conjugated polymer (PFP‐SO) was assembled with a novel enzymatic substrate 6‐O‐modified PNP‐β‐galactoside ( 1 ) for sensitive multiplex enzyme detections. The PFP‐SO/ 1 /lipase/β‐galactosidase system has two chemical input signals which are Input 1 (lipase) and Input 2 (β‐galactosidase), and output optical signals such as fluorescence emission at 416 nm or 450 nm. Four types of logic gates, including YES, INH, NAND and AND, were successfully constructed and utilized for multiplex detections of lipase and β‐galactosidase in one tube.
The preparation of associative networks containing multi‐walled carbon nanotubes (MWCNTs) with covalently attached cyclodextrin (CD) rings and poly[(isobutylene)‐co‐(maleic anhydride)‐co‐(maleic acid‐(4‐tert‐butylphenyl)amide)] in water is described in this study. The synthesis of CD containing MWCNTs is realized by an amidation reaction of oxidized MWCNTs with propargylamine followed by a 1,3‐dipolar cycloaddition with CD‐azide. Dispersion behavior indicated the high stability of these networks. An increase in viscosity compared to a solution of pure polymer as a cause of network formation is observed. The addition of a CD‐decomposing enzyme (taka‐diastase from Aspergillus oryzae) let the network collapse and results in sedimentation of the modified MWCNTs.
Two kinds of cyclodextrin/peptide (CD/peptide) hybrids bearing ZnII‐cyclen or cyclen, dansyl and β‐cyclodextrin (β‐CD) units have been synthesized as chemosensors for organic anionic molecules. ZnII‐cyclen serves as a ligand site and β‐CD is a receptor site for guest molecules, while the dansyl unit acts as a fluorescent probe. Examination of the fluorescence behaviors of these CD/peptides suggest that the hybrid containing Zn2+ has larger binding constants with respect to anionic molecules than that without Zn2+.
Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.
Methacrylate‐modified β‐cyclodextrin (β‐CD) and methyl methacrylate (MMA) have been radically copolymerized to obtain hydrophobic CD copolymers. The water‐insoluble copolymers are able to form highly stable inclusion complexes with anions of ionic liquids. Surprisingly, the inclusion of the anions in the CD cavity results in a significant change of thermal and solution properties. Furthermore, it can be shown that the structure of the ionic liquid anions influences the coil structure of the copolymers. The obtained results could be proven by means of microcalorimetry, differential scanning calorimetry, and dynamic light scattering.
Polymer‐encapsulated silver nanoparticles were synthesized and sterically stabilized by a new core‐shell type system consisting of poly(S‐alt‐MA)‐graft‐PMMA copolymer that acts as a scaffold for the synthesis of size confined nanoparticles. The graft copolymer is synthesized via ambient temperature ATRP using the CuBr/PMDETA catalytic system at ambient temperature. The graft copolymer is hypothesized to function as a scaffold with the anhydride part interacting strongly with the silver ions, while the PMMA graft functions as a polymer brush that stabilizes the dispersion and prevents the particle aggregation due to a ‘polymer brush effect’. UV absorption and TEM studies confirm that the synthesized silver composite particles have a core‐shell structure.
The complex formation of oppositely charged surfactants with some polypeptides is known to induce β‐sheet or helix formation. Here, we report on the complex formation of cylindrical brush polymers with poly(L ‐lysine) side chains and sodium dodecylsulfate (SDS). With increasing amount of added surfactant the cylindrical polymers first adopt a helical conformation with a pitch of approximately 14–24 nm followed by a spherically collapsed structure before eventually precipitation occurs. CD measurements suggest that the helix formation of the cylindrical brush polymers is driven by the hydrophobicity of the β‐sheets formed by the PLL side chain–SDS complexes.
Binary reactive/inert antifouling polymer brushes were grafted via a two step surface initiated polymerization from printed initiator monolayer and provided robust, effective polymeric surfaces for bioattachment with distinguishably reduced non‐specific adsorption. This synthetic strategy can be harnessed to build complex binary polymeric structures on substrate surfaces and the polymer brush surfaces reported in the present paper can be widely used for versatile biological study.
Summary: A chitin‐xylan hybrid polysaccharide having β(1 → 4)‐linked alternating structure of N‐acetyl‐D ‐glucosamine and D ‐xylose was synthesized via chitinase‐catalyzed polymerization. An oxazoline derivative of D ‐xylosyl‐β(1 → 4)‐N‐acetyl‐D ‐glucosamine ( 1 ) was effectively polymerized by the catalysis of chitinase from Bacillus sp., giving rise to a water‐soluble chitin‐xylan hybrid polysaccharide ( 2 ) in good yields. Molecular weights ( ) of 2 reached 1 500, which corresponds to 8–10 saccharide units.
A chitin‐xylan hybrid polysaccharide ( 2 ) synthesized via chitinase‐catalyzed polymerization. 相似文献
Summary: The effect of structural factors on polymer formation versus cyclization is reported. The reaction of sodium sulfide with either 1,4‐dibromobut‐2‐ene 1 or 1,4‐dibromobutane 2 has been carried out in presence of a phase transfer catalyst and it was observed that the former yields polymer, whereas the latter gives cyclic and linear products. Interestingly, trans/cis isomerization takes place during the polymer formation from 1 and a plausible mechanism has also been discussed.
The reaction mechanism for unsaturated compound 1 and saturated compound 2 is discussed here. 相似文献
A novel conjugated polymer (RB‐PPETE) of poly[p‐(phenylene ethynylene)‐alt‐(thienylene ethynylene)] (PPETE) bearing covalently linked thienylene rings and Rhodamine B units has been synthesized and successfully used to detect metal ions. The Rhodamine B exists as a lactone, which is colorless and non‐fluorescent. Hg2+ ions can induce the Rhodamine group to form a ring‐opened state. The fluorescence resonance energy transfer (FRET) was demonstrated in the polymer, and in the presence of Hg2+ ions the excitation energy along the backbone of the conjugated polymer is transferred to the energy acceptor (Rhodamine B), which leads to a visual color change of the solution from slight yellow to orange. Meanwhile, this new system shows outstanding Hg2+‐selective FRET off–on type fluoroionophoric properties among the representative metal ions in tetrahydrofuran.
Summary: The fabrication of polymer diodes on a glass substrate by an ink‐jet printing technique is reported. Both an n‐type semiconductive polymer, poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐(1‐cyanovinylene)phenylene] (CN‐PPV), and a p‐type semiconductive polymer, polypyrrole (PPy) or poly(3,4‐ethylenedioxythiophene) (PEDOT), were printed through a piezoelectric ink‐jet printer. The printed CN‐PPV/PPy and CN‐PPV/PEDOT diodes showed good rectifying characteristics. These results indicate the potential of the low‐cost ink‐jet printing technique to produce polymer microelectronic devices and circuits.
Schematic diagram of the printed polymer diode 相似文献
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
In the present paper, the microwave (MW)‐assisted synthesis of the alkaline N‐[3‐(dimethylamino)propyl]methacrylamide ( 4 ) and ‐acrylamide ( 5 ) monomers within minutes is described. The reaction was carried out by mixing and subsequent irradiation of 3‐dimethylamino‐1‐propylamine ( 3 ) and (meth)acrylic acid ( 1 / 2 ) without addition of solvent. After polymerization, the obtained homopolymers ( 6 / 7 ) exhibit lower critical solution temperature (LCST) behavior in water at 35 °C only at pH = 14. The LCST‐behavior can be influenced by N‐oxidation of the tertiary amino group with hydrogen peroxide or by formation of a polymer‐inclusion complex ( 6a ) of 6 and β‐cyclodextrin (β‐CD) by addition of randomly‐methylated β‐CD.
Summary: A novel intelligent delivery system based on the environmental dependence of the inclusion effect of β‐cyclodextrin (β‐CD) with guest molecules, using a β‐CD polymer (CDP) microgel as carrier, is proposed. Compared with smart hydrogels, which are driven by the phase‐volume transition, controlled release from the CDP microgel is driven by “host‐guest” inclusion effects. With the pH‐dependent inclusion complexation of methyl orange (MO) with β‐CD as a model system, the behavior of the controlled release of a CDP microgel was tested by changing the pH, showing that the mechanism is reasonable.
Schematic illustration of the pH‐dependent inclusion complexation of MO with β‐CD in the CDP microgel. 相似文献
Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.
A pathway for marking of polymer chains with radical spin traps during pulsed laser polymerization in free radical polymerization is presented. By introducing a so‐called marker that forms a non‐propagating radical at (or shortly after) the incidence of a laser pulse, a polymer subdistribution is generated by specifically terminating propagating radicals via combination with such a marker radical. The generated polymer subdistribution can subsequently be imaged by modern soft‐ionization mass spectrometry. Herein, the general methodology of the method in which such marker is generated via reaction of an initiating radical with a nitrone is demonstrated on the examples of BA and VAc.
A novel semi‐interpenetrating polymer network based on alginate and poly(N‐isopropylacrylamide) (PNiPAAm) has been synthesized that shows response to temperature and magnetic fields. Highly homogeneous porous hydrogels are obtained by copolymerizing N‐isopropylacrylamide and bis‐acrylamide in the presence of an aqueous alginate solution. The synthesis of magnetic iron oxides by in‐situ oxidation of iron cations coordinated to the alginate network results in a hydrogel with an enhanced deswelling rate with respect to pure PNiPAAm.
A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL−1 as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq3 device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.
