Morphological Transformation and Photophysical Properties of Rod‐Coil Poly[2,7‐(9,9‐dihexylfluorene)]‐block‐poly(acrylic acid) in Solution

Summary: The synthesis, morphology, and photophysical properties of PF‐b‐PAA with different coil lengths in dilute solutions of dichloromethane/methanol are reported. A tape‐like lamellar morphology is observed at a short coil length of PF‐b‐PAA. As the coil length increases, a large compound micelle, sphere, or vesicle is observed with different methanol contents because of the enhancement of the PAA swelling with methanol and the interfacial tension between the PF core and the PAA corona. Upon further increase of the coil length, an inverted morphology of a sphere or rod with a PF corona and PAA core is first observed but the core/corona is then reversed at a high methanol content as a result of the enhanced solubility of PAA. The morphological transformation leads to a significant variation in optical absorption or fluorescence characteristics because of the possible H‐aggregate formation.

Some of the various morphologies observed upon varying the coil length and the selective solvent content.     

Design of a Linear Poly(3‐hexylthiophene)/Fullerene‐Based Donor‐Acceptor Rod‐Coil Block Copolymer

Novel fullerene‐grafted poly(3‐hexylthiophene) (P3HT)‐based rod‐coil block copolymers have been synthesized. The regioregular P3HT rod block has been synthesized by a modified Grignard metathesis reaction (GRIM). An original in situ end‐capping reaction has been developed in order to convert the P3HT block into an efficient macro‐initiator for the nitroxide‐mediated radical polymerization (NMRP) of the coil block. Controlled radical polymerization of the second poly(butylacrylate‐stat‐chloromethylstyrene) [P(BA‐stat‐CMS)] block has been done through various conditions leading to different coil block lengths. The final electron donor‐acceptor block copolymer has been obtained after C₆₀ grafting in soft conditions. Copolymers have been characterized by ¹H NMR and size exclusion chromatography. Optical characterizations, before and after C₆₀ grafting, are reported.

     

Contractive Polymeric Complex Micelles as Thermo‐Sensitive Nanopumps

Complex micelles were obtained from PS‐b‐PNIPAM‐b‐PAA micelles and PEG‐b‐P4VP block copolymers via the strong electrostatic interaction and hydrogen bonding between PAA and P4VP blocks in water. The PS block formed the core and the PAA/P4VP complex shell functioned as a semi‐permeable membrane which could control the permeation of small molecules. Between the core and shell, the large fluid‐filled space that was formed with the thermoresponsive PNIPAM gel could retain the loaded drug for a long period of time. With increasing temperature, the shrinkage of the PNIPAM coils pumped the drug out of the complex micelles. The complex micelles functioned as a contractive “nanopump”, which could potentially be applied as a thermosensitive controlled release system.

     

Synthesis of Novel Rod‐Coil Amphiphilic Block Copolymers PAA‐b‐DPS with Fréchet‐Type Dendronized Polystyrene and Poly(acrylic acid)

A series of well‐defined rod‐coil PAA‐b‐DPS block copolymers, containing Fréchet‐type dendronized polystyrene (DPS) with different generation as a rod‐like hydrophobic block and poly(acrylic acid) (PAA) as a hydrophilic coil were synthesized. The procedure included the following steps: the precursor PMA‐b‐DPS copolymer was prepared through ATRP of Fréchet‐type dendritic styrene macromonomer bearing the first to the third generation (G1–G3), respectively, initiated by poly(methyl acrylate) (PMA‐Br). Then, by converting PMA into PAA by subsequent hydrolysis, the targeted amphiphilic copolymers were obtained. Moreover, by using the rod‐coil amphiphiles as building blocks, large compound micelles and vesicles were formed in a binary solvent mixture of DMF/H₂O. Morphological changes in self‐assembly showed dependence on the length of the dendronized block.

     

Collapse of Cylindrical Brushes with 2‐Isopropyloxazoline Side Chains Close to the Phase Boundary

A high‐molar‐mass cylindrical brush polymer with a main chain degree of polymerization of P_w = 1047 is synthesized by free‐radical polymerization of a poly‐2‐isopropyloxazoline macromonomer with P_n = 28. The polymerization is conducted above the lower phase transition temperature of the macromonomer, i.e., in the phase‐separated regime, which provides a sufficiently concentrated macromonomer phase mandatory to obtain high‐molar‐mass cylindrical brushes. Upon heating to the phase transition temperature, the hydrodynamic radius is observed to shrink from 34 to 27 nm. Further increase in temperature resulted in aggregated chains which were observed to coexist with single chains until eventually only aggregates of μm size were detectable.

     

The Self‐Assembled Structure of the Diblock Copolymer PCL‐b‐P4VP Transforms Upon Competitive Interactions with Octaphenol Polyhedral Oligomeric Silsesquioxane

This paper describes the miscibility and self‐assembly, mediated by hydrogen‐bonding interactions, of new block copolymer/nanoparticle blends. The morphologies adopted by the immiscible poly[(ε‐caprolactone)‐block‐(4‐vinyl pyridine)] (PCL‐b‐P4VP) diblock copolymer changes upon increasing the number of competitive hydrogen‐bonding interactions after adding increasing amounts of octaphenol polyhedral oligomeric silsesquioxane (OP‐POSS). Transmission electron microscopy reveals morphologies that exhibit high degrees of long‐range order, such as cylindrical and spherical structures, at relatively low OP‐POSS contents, and short‐range order or disordered structures at higher OP‐POSS contents. Analyses performed using differential scanning calorimetry, wide‐angle X‐ray diffraction, and FT‐IR spectroscopy provide positive evidence that the pyridyl units of the P4VP block are significantly stronger hydrogen‐bond acceptors toward the OH group of OP‐POSS than are the CO groups of the PCL block, thereby resulting in excluded and confined PCL phases.

     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Block Copolymer Micelles with Near Infrared Metal Phthalocyanine Dyes for Laser Induced Writing

A route has been developed to disperse metal‐containing phthalocyanine dyes in a non‐polar medium based on amphiphilic block copolymer micelles of poly[styrene‐block‐(4‐vinylpyridine)] (PS‐b‐P4VP) and poly[styrene‐block‐(acrylic acid)] (PS‐b‐PAA) copolymers. Polar P4VP and PAA efficiently encapsulate cobalt(II ), manganese(II ), and nickel(II ) phthalocyanine dyes by axial coordination of nitrogen and µ‐oxo bridged dimerization with the transition metals, respectively. Good dispersion of the dyes is confirmed by the linear enhancement of Q‐bands in UV–vis absorption spectra with dye concentration. A thin monolayered PS‐b‐P4VP micelle film that contained a nickel(II ) phthalocyanine dye which efficiently adsorbs a laser beam on a localized area to generate a local heat higher than the glass transition temperatures of both blocks. One‐dimensional laser writing on the dye‐containing film allows the fabrication of a few submicrometer wide line patterns in which the self‐assembled nanostructure of the block copolymer is modified by the directional heat arising from laser scanning.

     

DMAP/Cr(III) Catalyst Ratio: The Decisive Factor for Poly(propylene carbonate) Formation in the Coupling of CO2 and Propylene Oxide

Highly efficient formation of poly(propylene carbonate) can be achieved in the coupling of CO₂ and propylene oxide assisted by 4‐(N,N‐dimethylamino)pyridine (DMAP) and catalyzed with salen chromium(III) chloride by using DMAP/Cr ratios of less than 2. Under these conditions a possible backbiting mechanism is suppressed, leading to only minor amounts of cyclic carbonate as a side product.

     

Sequential Electrografting and Ring‐Opening Metathesis Polymerization: a Strategy for the Tailoring of Conductive Surfaces

Summary: An electrografting technique has been combined with ring‐opening metathesis polymerization (ROMP). Poly(allyl methacrylate) chains have been chemisorbed onto steel and carbon plates under an appropriate cathodic potential in N,N‐dimethylformamide. The allyl moieties have been converted into Ru catalysts active in ROMP of norbornene and its derivatives. Initiation of ROMP from the surface is an efficient strategy to prepare strongly adhering coatings of tunable thickness and hydrophilic/hydrophobic balance, depending on the norbornene derivative polymerized at the surface.

The hydrophobicity of the polymer coating may be controlled by hydrolysis of the polynorbornene derivative.     

Synthesis and Characterization of Helix‐Coil Diblock Copolymers with Controlled Supramolecular Architectures in Aqueous Solution

Summary: A series of helix‐coil diblock copolymers based on poly(ethylene oxide) and optically active helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutoxy)phenyl]styrene} (PMBPS) were synthesized via atom transfer radical polymerization (ATRP). The synthetic methodology permitted straightforward preparation of the diblock copolymers with relatively low polydispersities and a broad range of compositions and molecular weights. Depending on the composing block length and the initial concentration, the copolymers self‐assembled into different supramolecular structures in aqueous solution, including spherical micelles, vesicles, multilamellar vesicles, large compound vesicles, and tubules.

Schematic representation of the synthesis of PEO‐b‐PMBPS block copolymers and their aggregation in aqueous solution.     

Surfactant‐Induced Helix Formation of Cylindrical Brush Polymers with Poly(L‐lysine) Side Chains

The complex formation of oppositely charged surfactants with some polypeptides is known to induce β‐sheet or helix formation. Here, we report on the complex formation of cylindrical brush polymers with poly(L ‐lysine) side chains and sodium dodecylsulfate (SDS). With increasing amount of added surfactant the cylindrical polymers first adopt a helical conformation with a pitch of approximately 14–24 nm followed by a spherically collapsed structure before eventually precipitation occurs. CD measurements suggest that the helix formation of the cylindrical brush polymers is driven by the hydrophobicity of the β‐sheets formed by the PLL side chain–SDS complexes.

     

A Strategy for Synthesis of Ion‐Bonded Supramolecular Star Polymers by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by ¹H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.

     

Novel Water‐Soluble Poly(m‐benzamide)s: Precision Synthesis and Thermosensitivity in Aqueous Solution

Summary: Chain‐growth polycondensations of 3‐aminobenzoic acid methyl esters 1a and 1b , bearing a tri‐ or tetra(ethylene glycol) methyl ether unit on the amino group, respectively, were carried out with lithium hexamethyldisilazide (LiHMDS) as a base and phenyl 4‐methylbenzoate ( 2 ) as an initiator in THF at 0 °C. The poly(m‐benzamide)s obtained in the presence of N,N,N′,N′‐tetramethylethylenediamine (TMEDA) possessed narrow molecular weight distributions ( < 1.2) with molecular weights that were determined by the feed ratios of [ 1 ]₀/[ 2 ]₀. Poly 1a and poly 1b were each soluble in water and exhibited a lower critical solution temperature (LCST) in water. Furthermore, the phase separation in water depended on the length of the oligo(ethylene glycol) side chain and on the molecular weight and molecular weight distribution of poly 1 .

Thermally sensitive water‐soluble poly(m‐benzamide)s.     

Novel Photoactive Polymeric Multilayer Films Formed via Electrostatic Self‐Assembly

Summary: We demonstrate a novel approach for constructing photoactive multilayer films in which the aggregation of fluorescing molecules is effectively eliminated. In the films formed via a layer‐by‐layer electrostatic self‐assembly technique, the core‐shell amphiphilic copolymer, poly[(sodium 4‐styrenesulfonate)‐block‐vinylnaphthalene], was deposited. The isolated cores served as nanosized host sites for photoactive guest molecules (pyrene, perylene). The efficient energy transfer between polymeric chromophores and perylene molecules was observed.

AFM image of a nanostructured polymeric film prepared via a layer‐by‐layer technique and containing photoactive block copolymer poly[(sodium 4‐styrenesulfonate)‐block‐vinylnaphthalene]. Below is the representative height profile taken along the drawn line.     

Nanometer‐Scaled Hollow Spherical Micelles with Hydrophilic Channels and the Controlled Release of Ibuprofen

PS‐b‐PAA spherical micelles with a liquid core and a PAA shell are prepared with the assistance of 1,2‐dichloroethane. During the process of adding a mixture of PNIPAM‐b‐P4VP and PEG‐b‐P4VP, multi‐layered micelles with a mixed corona that consists of both PNIPAM and PEG chains are constructed through the electrostatic interaction and hydrogen bonding between the PAA block and the P4VP block. When heating above the LCST, the PNIPAM chains collapse onto the PAA/P4VP complex layer while the PEG chains still stretch into the solution through the collapsed PNIPAM layer, which leads to the formation of hydrophilic channels around the PEG chains. The ibuprofen encapsulated in the hollow space can diffuse through the channels and its release rate can be controlled by changing the ratio of PEG chains to PNIPAM chains in the corona.

     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Supramolecular Nanocycles Comprising β‐Cyclodextrin‐click‐Ferrocene Units: Rings of Rings of Rings

We applied 1,3‐dipolar cycloaddition to bind ethynylferrocene onto 6I‐azido‐6I‐deoxycyclomaltoheptaose under microwave assisted conditions. The process was investigated by ¹H NMR, FT‐IR spectroscopy, and MALDI‐TOF mass spectrometry. The ability of the synthesized compound to self‐organize to cyclic supramolecular structures was investigated by dynamic light scattering measurements and cryo‐transmission electron microscopy.

     

Synthesis of Spherical Polyelectrolyte Brushes by Thermo‐controlled Emulsion Polymerization

A novel method of thermo‐controlled emulsion polymerization has been employed to synthesize spherical polyelectrolyte brushes that consist of a solid polystyrene core and a poly (acrylic acid) (PAA) shell covalently attached on the core surface densely by one end. The growth of brushes from the core surface was monitored by dynamic light scattering (DLS). The particle size of PS core latex showed a narrow size distribution when observed by scanning electron microscopy (SEM). The brush size changed significantly upon changing pH value and ionic strength, and displayed similar behavior to brushes prepared by photo‐emulsion polymerization. The grafting density of the PAA brush, which was determined by cutting off the PAA chains using alkali hydrolysis, confirmed the formation of PAA brushes.

     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.