Spatioselective Modification of Bicompartmental Polymer Particles and Fibers via Huisgen 1,3‐Dipolar Cycloaddition

Precise nano‐ and microscale control of the architecture of biodegradable biomaterials is desirable for several biotechnological applications such as drug delivery, diagnostics, and medical imaging. Herein, we combine electrohydrodynamic co‐jetting and highly specific surface modification (via Huisgen 1,3‐dipolar cycloaddition) to prepare particles and fibers with spatioselective surface modification. We first prepared biphasic particles and fibers from commercial poly(lactide‐co‐glycolide) copolymers via electrohydrodynamic co‐jetting of two organic solutions loaded with fluorescent macromolecules and acetylene‐modified PLGA derivatives. (i) Spatially controlled reaction of poly[lactide‐co‐(propargyl glycolide)] with O‐(2‐aminoethyl)‐O′‐(2‐azidoethyl)heptaethylene glycol and (ii) subsequent conversion of the newly introduced amino groups with fluorescence probes resulted in particles and fibers with surface modification of one hemisphere only.

     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Temperature‐Responsive Graft Copolymers with Poly(propylene glycol) Side Chains

The phase behavior of graft copolymers in aqueous solution was investigated. The graft copolymers consist of poly(propylene glycol) (PPG) side chains and N,N‐dimethylacrylamide (dMA), N‐vinylimidazole (VIm), and N‐isopropylacrylamide (iPA), respectively, as backbones. Phase transition temperatures of the PPG copolymers increased with increasing the content of dMA and iPA as relatively more hydrophilic comonomers and with an increase in the degree of ionization of the incorporated VIm units.

Chemical structure of the graft copolymers     

Reaction of a Metallamacrocycle Leading to a Mercury(II)⋅⋅⋅Palladium(II)⋅⋅⋅Mercury(II) Interaction

All wrapped up : The reaction of a 22‐membered macrocycle derived from bis(o‐formylphenyl)mercury and 1,2‐phenylenediamine with palladium(II) results in cleavage of the macrocycle and concomitant formation of a trimetallic complex (see picture; phenyl rings truncated for clarity). The nature of the Hg^II???Pd^II???Hg^II interaction was investigated by theoretical studies.

     

Macromonomer Purification Strategy for Well‐Defined Polymer Amphiphiles Incorporating Poly(ethylene glycol) Monomethacrylate

Summary: Commercial hydroxy‐terminated poly(ethylene glycol) monomethacrylates (PEG‐MAs) contain poly(ethylene glycol) dimethacrylate, which leads to unfavorable gel formation on polymerization. Here, hydroxy‐terminated PEG‐MA is readily isolated using a dimethylsilyl resin chlorinated with 1,3‐dichloro‐5,5‐dimethylhydantoin. Solution polymerization of the isolated PEG‐MA by free radical routes gives a high‐molecular‐weight amphiphilic graft copolymer without cross‐linking. The resulting polymer is stable for long periods in ambient conditions with preservation of the hydroxy end groups of PEG.

Commercial hydroxy‐terminated PEG‐MA can be separated readily and completely from PEG dimethacrylate contaminant with chlorinated dimethylsilyl resin.     

Encapsulation of a Single Metal Nanoparticle with Tunable Size in a Monodisperse Polymer Microcapsule

A versatile approach to fabricate monodisperse poly[styrene‐co‐(divinyl benzene)] (PS‐co‐DVB) microcapsules that contain a single gold nanoparticle (AuNP) has been demonstrated. Using the PS‐co‐DVB microcapsule as a microreactor, aqueous HAuCl₄ and NaBH₄ solutions are subsequently infiltrated. The size of the resulting AuNP inside of the PS‐co‐DVB microcapsules is easily tunable by controlling the repeated infiltration cycles of aqueous HAuCl₄ and NaBH₄. PS‐co‐DVB microcapsules that contain a single silver and palladium nanoparticle are also obtained by following a similar protocol.

     

Polypeptoids by Living Ring‐Opening Polymerization of N‐Substituted N‐Carboxyanhydrides from Solid Supports

The nucleophilic living ring‐opening polymerization of N‐substituted glycine N‐carboxyanhydrides using solid‐phase synthesis resins is reported. By variation of experimental parameters, products with near Poisson distributions are obtained. As opposed to reversible deactivation radical polymerization, the living polymerization is demonstrated to be viable to high monomer conversion and through multiple monomer addition steps. Successful preparation of a multiblock copolypeptoid is proof for a highly living and robust character of the solid‐phase peptoid polymerization.

     

Selective Enzymatic Grafting by Steric Control

Enzymatic grafting of caprolactone was carried out from poly[styrene‐co‐(4‐vinylbenzyl alcohol)] containing 10% hydroxyl functional monomer and compared with the grafting of vinyl acetate. A molecular weight increase due to the grafting of polycaprolactone was observed by size exclusion chromatography. Closer investigation of the grafting density by ¹H NMR revealed an upper limit to the amount of grafting of about 50–60% of the pendant hydroxyl groups leaving unreacted hydroxyl groups on the polymer backbone available for subsequent reactions. The higher grafting density (95%) obtained with vinyl acetate suggests that this is not due to limited accessibility of the backbone but sterical constrains. Moreover, the grafting action of polycaprolactone seems to be a combination of grafting from by monomer initiation and grafting onto by transesterification of polycaprolactone.

     

Temperature‐Sensitive Poly(N‐isopropylacrylamide) Hydrogels with Macroporous Structure and Fast Response Rate

Macroporous temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPA) hydrogels were prepared by a novel phase‐separation technique to improve the response properties. In comparison with a conventional PNIPA hydrogel prepared in water, these macroporous hydrogels, prepared by polymerization in aqueous sucrose solutions, have higher swelling ratios at temperatures below the lower critical solution temperature and exhibit much faster response rates to temperature changes.

Scanning electron microscopy image of the surface of a PNIPA hydrogel, prepared in 1.50 M aqueous sucrose solution.     

Synthesis of Multiblock Polymer Containing Narrow Polydispersity Blocks

Summary: We have developed a new strategy to prepare multiblock polymers and copolymers via one‐ or two‐step polymerization using a polymerizable cyclic trithiocarbonate (CTTC), 4,7‐diphenyl‐[1,3]dithiepane‐2‐thione. CTTC undergoes ring‐opening process to incorporate a trithiocarbonate moiety. The trithiocarbonate moiety in turn, functions as a reversible addition fragmentation chain transfer (RAFT) agent. Through this mechanism, multiblock polystyrenes and polystyrene‐block‐ poly(butyl acrylate) copolymers containing various narrow polydispersity blocks can be prepared.

Integrated process of ring‐opening and RAFT polymerizations involving cyclic trithiocarbonates.     

RAFT Inverse Miniemulsion Polymerization of Acrylamide

RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.

     

One‐Pot Difunctionalization of Poly(ω‐pentadecalactone) with Thiol‐Thiol or Thiol‐Acrylate Groups,Catalyzed by Candida antarctica Lipase B

Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.

Difunctionalization of poly‐PDL.     

Hydrodynamic Effect on Secondary Phase Separation in an Epoxy Resin Modified with Polyethersulfone

Summary: The evolution of the morphologies in blends of epoxy/4,4′‐methylenebis(2,6‐dimethylaniline)/polyethersulfone was followed by time‐resolved light scattering, optical microscopy and scanning electron microscopy. The results suggest that, once the diffusion of epoxy molecules cannot follow the geometrical growth, a secondary phase separation occurs, even in the droplet morphology, in which the size of the epoxy‐rich domain grows as usual. The viscoelastic effect of polyethersulfone is also discussed.

Development of morphologies followed by OM: bicontinuous phase separation in the PES‐15.9 blend cured at 140 °C after 80 s.     

pH‐Disintegrable Polyelectrolyte Multilayer‐Coated Mesoporous Silica Nanoparticles Exhibiting Triggered Co‐Release of Cisplatin and Model Drug Molecules

We report on the fabrication of pH‐disintegrable polyelectrolyte multilayer‐coated mesoporous silica nanoparticles (MSN) capable of triggered co‐release of cisplatin and model drug molecules. The outer polyelectrolyte multilayer was assembled from permanently cationic polyelectrolyte, poly(allyl amine hydrochloride) (PAH), and negatively charged polyelectrolyte, P(DMA‐co‐TPAMA), consisting of N,N‐dimethylacrylamide (DMA) and 3,4,5,6‐tetrahydrophthalic anhydride‐functionalized N‐(3‐aminopropyl)methacrylamide (TPAMA) monomer units, which exhibits pH‐induced charge conversion characteristics. Thus, the subtle alteration of solution pH from 7.4 to ≈5–6 can lead to the disintegration of outer polyelectrolyte multilayers, accompanied with the co‐release of cisplatin and RhB.

     

Novel Two‐Compartment Micelles Formed by Self‐Assembly of Linear Pentablock Copolymers in Selective Solvents

In this work, the formation of two‐compartment micelles from symmetric pentablock copolymers in selective solvents was studied using the dissipative particle dynamics simulation technique, and the effects of block lengths and solvent quality were investigated. The simulations revealed several new morphologies and their formation mechanisms were elucidated at the molecular level, providing useful information that may contribute to the future rational design and synthesis of novel multicompartment micelles with tailored structures.

     

Formation of o‐Phenylenediamine Oligomers and their Self‐Assembly into One‐Dimensional Structures in Aqueous Medium

Summary: Uniform one‐dimensional (1D) structures of o‐phenylenediamine (oPD) oligomers are obtained by direct mix of AgNO₃ and oPD aqueous solutions at room temperature. The formation of the 1D structures involves two stages: (1) oxidation of oPD by AgNO₃, yielding individual oPD oligomers; and (2) self‐assembly of the oligomers, forming the 1D structures. Upon decreasing medium pH, the 1D structures can break‐apart to form individual oligomers, or vice versa. It is also found that both the concentration and molar ratio of reactants can influence the morphology of the structures thus formed.

Schematic illustration of the formation mechanism of 1D structures from oPD and AgNO₃, and energy‐dispersed spectrum of the precipitate.     

Submicron Polymer Gratings: Optical Diffraction and Spontaneous Brillouin Scattering

Summary: Brillouin light scattering (BLS) from submicron‐size patterned polyurethane (PU) films was found to display rich spectral features. Their identification allows the determination of the mechanical properties of the PU and the characterization of the periodicity and the coherence of the structure. A temperature‐dependent study demonstrates that BLS is a sensitive tool to monitor changes of the mechanical properties and/or of the morphology.

(a) Scheme of the sample structure and the scattering geometry, (b) SEM top view of the PU features.     

Phase Transition Behaviors of Self‐Oscillating Polymer and Nano‐Gel Particles

Summary: Self‐oscillating polymers and nano‐gel particles consisting of N‐isopropylacrylamide and the ruthenium catalyst of the Belousov‐Zhabotinsky reaction have been prepared. In order to clarify the crosslinking effect on the self‐oscillating behavior, the phase transition behaviors were investigated by measuring the transmittance and the fluorescence intensity of the polymer solution and the gel bead suspension. Cooperative effects due to crosslinking will play an important role for the design of nanoactuators.

Chemical structure of poly(NIPAAm‐co‐Ru(bpy)₃).     

A Template‐Free Route to Polypyrrole Nanofibers

A template‐free method for the production of polypyrrole nanofibers is presented. By adding a small amount of bipyrrole into the oxidative polymerization of pyrrole, a drastic change in the morphology of the observed material is observed from large, granular particles to nanofibrils with an average diameter of 20 nm. This simple procedure allows for the production of polypyrrole nanofibers without the presence of surfactants or other structural directing agents. The polypyrrole nanofibers can form stable water dispersions which can be cast into films of sufficient quality to function as chemical sensors for analytes such as ammonia.

     

High Solids Content,Soap‐Free,Film‐Forming Latexes Stabilized by Laponite Clay Platelets

High solids content film‐forming poly[styrene‐co‐(n‐butyl acrylate)] [poly(Sty‐co‐BuA)] latexes armored with Laponite clay platelets have been synthesized by soap‐free emulsion copolymerization of styrene and n‐butyl acrylate. The polymerizations were performed in batch in the presence of Laponite and a methyl ether acrylate‐terminated poly(ethylene glycol) macromonomer in order to promote polymer/clay association. The overall polymerization kinetics showed a pronounced effect of clay on nucleation and stabilization of the latex particles. Cryo‐transmission electron microscopy observation confirmed the armored morphology and indicated that the majority of Laponite platelets were located at the particle surface. The resulting nanostructured films displayed enhanced mechanical properties.