具有“开关”效应的纳米金／智能凝胶复合物导电机理

制备了纳米金/智能凝胶复合物,并对其导电行为进行了研究.研究表明:以智能凝胶为基体的复合物电性能表具有良好的"开关"效应;其导电过程在不同的温度区域符合不同的导电机理.低温时,复合物处于溶胀状态,其导电行为符合隧道效应和场制发射理论;高温时,复合物为收缩状态,其导电行为基本符合欧姆定律.     

聚苯胺/纳米金复合材料

由于聚苯胺/纳米金复合材料不仅同时具有纳米金和聚苯胺原有的特异性能,而且两组分之间还存在着相互协同作用,极大地提升了聚苯胺基体的性能,从而表现出突出的固有电导性、优异的反应催化性和特殊的电荷传递性,因此成为近年来的研究热点。本文综述了聚苯胺/纳米金复合材料的最新研究进展：归纳了聚苯胺/纳米金复合材料的制备方法和各种方法的机理,简单介绍了复合材料在生物医学、传感器和微电子装置等方面的应用,展望了今后复合材料研究的方向。     

Porous Protein‐Based Nanoparticle Hydrogel for Protein Chips with Improved Sensitivity

We have discovered a novel method to prepare a protein‐based hydrogel, that is, a ‘three‐dimensional nanostructured protein hydrogel’ (3D NPH), which is composed of loosely inter‐connected protein–polymer hybrid nanoparticles. The 3D NPH can be easily prepared by spotting a protein/polymer mixture on a substrate. Surprisingly, gold nanoparticles carrying protein molecules easily diffuse into the 3D NPH through pores and spaces. We have shown that the protein chip made by our 3D NPH method has tremendously improved sensitivity in detecting protein–protein interactions compared with that by direct protein immobilization methods.

     

Mechanical Properties and Phase Transition of High Clay Content Clay/Poly(N-isopropylacrylamide) Nanocomposite Hydrogel

Summary: A series of high clay content Clay-S/PNIPAAm nanocomposite hydrogels (S-N gels) has been successfully prepared by in situ polymerization. Their mechanical properties and phase transition behavior has been systematically investigated. It was found that S-N gels show high tensile strength, high elongation at break, fast stress relaxation, high hysteresis, and poor resilience, which may be ascribed to the hydrophilicity and flexibility of PNIPAAm chains. It was also concluded that the macroscopic phase transition behavior of S-N gels depend on the ratio of Segments II (thermosensitive segments) to Segments I (non-thermosensitive segments).     

Preparation of Molecularly Imprinted Electrochemical Sensor for Detection of Vincristine Based on Reduced Graphene Oxide/Gold Nanoparticle Composite Film

An innovative molecularly imprinted electrochemical sensor was fabricated based on reduced graphene oxide (RGO) and gold nanocomposite (Au) for rapid detection of vincristine (VCR). The RGO‐Au composite membrane was obtained via direct one‐step electrodeposition technique of graphene oxide (GO) and chloroauric acid (HAuCl₄) on the surface of a glassy carbon electrode (GCE) by means of cyclic voltammetry (CV) in the potential range between ?1.5 and 0.6 V in phosphate buffer solution (PBS) of pH 9.18, which is capable of effectively utilizing its superior electrical conductivity, larger specific surface area due to its synergistic effect between RGO and Au. The molecularly imprinted polymers (MIPs) were synthesized on the RGO‐Au modified glassy carbon electrode surface with VCR as the template molecular, methyl acrylic acid (MAA) as the functional monomer, and ethylene glycol maleic rosinate acrylate (EGMRA) as a cross‐linker. The performance of the sensor was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) in detail. Under the optimum conditions, the fabricated sensor exhibited a linear relationship between oxidation peak current and VCR concentration over the range of 5.0×10^?8–5.0×10^?6 mol·L ^minus;1 with a correlation coefficient of 0.9952 and a detection limit (S/N=3) of 2.6×10^minus;8 mol·L^minus;1. The results indicated that the imprinted polymer films exhibited an excellent selectivity for VCR. The imprinted sensor was successfully used to determine VCR in real samples with recoveries of 90% –120% by using the standard addition method.     

Controlled Release from and Tissue Response to Physically Bonded Hydrogel Nanoparticle Assembly

Our recent work on synthesis and application of thermally gelling nanoparticle dispersions is briefly reviewed here. These nanoparticles consist of interpenetrating polymer networks (IPN) of poly-acrylic acid (PAAc) and poly(N-isopropylacrylamide) (PNIPAM). The aqueous IPN nanoparticle dispersions with polymer concentrations above 2.5 wt % underwent an inverse thermoreversible gelation at about 33 °C. Dextran markers of various molecular weights as model macromolecular pseudodrugs were mixed with the IPN nanoparticle dispersion at room temperature. At body temperature, the dispersion became a gel. The dextran release profiles were then measured using UV-visible spectroscopy. The biocompatibility of this nanoparticle assembly was assessed using an animal implantation model.     

高分子/单链高分子纳米粒子复合体系中的界面性质

高分子与纳米粒子复合是改善高分子材料性能的有效途径.近20年来关于高分子/纳米粒子复合物的研究引起了学术界广泛的兴趣.然而由于此类体系中的影响因素复杂,虽然学者们在相关材料性能的研究方面取得了重要进展,但是相关理论的发展却相对滞后,其中一个重要原因是实验上表征手段的缺失,导致对体系中纳米粒子与本体高分子链相互作用规律的认识(尤其是两者界面性质的认识)不够.本文总结和阐述了我们近几年利用分子动力学模拟技术研究高分子/单链高分子纳米粒子复合体系的主要结果,并围绕此类复合体系中的界面结构及动力学性质,讨论并总结了纳米粒子对本体高分子链的作用范围及影响规律,指出单链纳米粒子对熔体链的作用范围与纳米粒子的自身尺寸相当,而与熔体高分子链的分子量没有直接的关系.该结论将为纳米复合体系高分子理论的发展提供重要参考.     

Restriction of Molecular Twisting on a Gold Nanoparticle Surface

To understand the photophysical properties of intramolecular charge transfer (ICT) and twisted intramolecular charge transfer (TICT) states on a gold nanoparticle (Au NP) surface, we have designed and synthesized a new coumarin molecule (C3) that exists both as ICT and TICT states in its excited state in a polar environment. On a Au NP surface, an excited C3 molecule only exists as an ICT state owing to restricted molecular rotation of a diethylamino group; as a result, no conversion from the ICT to TICT state was observed. Selection of the preferential state of a molecule with dual emitting states can be helpful for selected biological applications.     

Cooperative Gold Nanoparticle Stabilization by Acetylenic Phosphaalkenes

Acetylenic phosphaalkenes (APAs) are used as a novel type of ligands for the stabilization of gold nanoparticles (AuNP). As demonstrated by a variety of experimental and analytical methods, both structural features of the APA, that is, the P?C as well as the C?C units are essential for NP stabilization. The presence of intact APAs on the AuNP is demonstrated by surface‐enhanced Raman spectroscopy (SERS), and first principle calculations indicate that bonding occurs most likely at defect sites on the Au surface. AuNP‐bound APAs are in chemical equilibrium with free APAs in solution, leading to a dynamic behavior that can be explored for facile place‐exchange reactions with other types of anchor groups such as thiols or more weakly binding phosphine ligands.     

Voltammetric Determination of Metol on a Gold Nanoparticle Modified Carbon Molecular Wire Electrode

A carbon molecular wire electrode was fabricated using diphenylacetylene as the modifier and gold nanoparticles were electrodeposited on the surface. The morphology and electrochemical properties of this modified electrode were investigated by scanning electron microscopy and electrochemical impedance spectroscopy. Two well-defined peaks for metol appeared using this gold nanoparticle-modified carbon molecular wire electrode by cyclic voltammetry with a high current response. These results demonstrate a synergistic effect between the gold nanoparticles and the carbon molecular wire electrode resulting in a rapid electrochemical reaction. The electrochemical conditions for metol were optimized on the modified electrode and a detection limit of 0.64?µmol/L and a linear dynamic range between 2.0 to 800.0?µmol/L were obtained. This modified electrode provided good selectivity, high sensitivity, and acceptable reproducibility, demonstrating promise for the determination of metol in the water.     

Ligand Control over the Electronic Properties within the Metallic Core of Gold Nanoparticles

The behavior of electrons within the metallic core of gold nanoparticles (AuNPs) can be controlled by the nature of the surface chemistry of the AuNPs. Specifically, the conduction electron spin resonance (CESR) spectra of AuNPs of diameter 1.8–1.9 nm are sensitive to ligand exchange of hexanethiol for 4‐bromothiophenol on the surface of the nanoparticle. Chemisorption of the aromatic ligand leads to a shift in the metallic electron’s g‐factor toward the value expected for pure gold systems, suggesting an increase in metallic character for the electrons within the gold core. Analysis by UV/Vis absorption spectroscopy reveals a concomitant bathochromic shift of the surface plasmon resonance band of the AuNP, indicating that other electronic properties of AuNPs are also affected by the ligand exchange. In total, our results demonstrate that the chemical nature of the ligand controls the valence band structure of AuNPs.     

The Mechanism of Cleavage of RNA Phosphodiesters by a Gold Nanoparticle Nanozyme

The cleavage of uridine 3’-phosphodiesters bearing alcohols with pK_a ranging from 7.14 to 14.5 catalyzed by AuNPs functionalized with 1,4,7-triazacyclononane-Zn(II) complexes has been studied to unravel the source of catalysis by these nanosystems (nanozymes). The results have been compared with those obtained with two Zn(II) dinuclear catalysts for which the mechanism is fairly understood. Binding to the Zn(II) ions by the substrate and the uracil of uridine was observed. The latter leads to inhibition of the process and formation of less productive binding complexes than in the absence of the nucleobase. The nanozyme operates with these substrates mostly via a nucleophilic mechanism with little stabilization of the pentacoordinated phosphorane and moderate assistance in leaving group departure. This is attributed to a decrease of binding strength of the substrate to the catalytic site in reaching the transition state due to an unfavorable binding mode with the uracil. The nanozyme favors substrates with better leaving groups than the less acidic ones.     

Photothermally Reprogrammable Buckling of Nanocomposite Gel Sheets

Patterning deformation within the plane of thin elastic sheets represents a powerful tool for the definition of complex and stimuli‐responsive 3D buckled shapes. Previous experimental methods, however, have focused on sheets that access a limited number of shapes pre‐programmed into the sheet, restricting the degree of dynamic control. Here, we demonstrate on‐demand reconfigurable buckling of poly(N‐isopropylacrylamide‐co‐acrylic acid) (PNIPAM) hydrogel network films containing gold nanoparticles (AuNPs) by patterned photothermal deswelling. Predictable, easily controllable, and reversible transformations from a single flat gel sheet to numerous different three‐dimensional forms are shown. Importantly, the response time is limited by poroelastic mass transport, rather than photochemical switching kinetics, enabling reconfiguration of shape on timescales of several seconds, with further increases in speed possible by reducing film thickness.     

A Hybrid Supramolecular Polymeric Hydrogel with Rapid Self‐Healing Property

A hybrid supramolecular polymeric hydrogel is conveniently constructed via host–guest interaction of a host cyclodextrin polymer (poly‐CD) with a guest α‐bromonaphthalene polymer (poly‐BrNp) and mixing with 6‐thio‐β‐cyclodextrin (β‐SH‐CD) modified gold nanoparticles (GPCDs) in aqueous solution. According to the dynamic oscillatory data, the hydrogel exhibits markedly enhanced stiffness compared with the GPCD‐free one (both G′ and G“ values are almost twice as high as those of the original GPCD‐free hydrogel) due to the introduction of the inorganic gold nanoparticles. This hybrid supramolecular polymeric hydrogel has a rapid and excellent self‐healing property (only about 1 min, and the G′ and G” of the self‐healed hydrogel almost turned back to their original levels after 1 hour) in air (without adding any solvent or additive).     

Photoactivated Nitrene Chemistry to Prepare Gold Nanoparticle Hybrids with Carbonaceous Materials

Photolysis of organic solvent soluble aryl azide‐modified gold nanoparticles (N₃‐AuNPs) with a core size of 4.6±1.6 nm results in the generation of interfacial reactive nitrene intermediates. The high reactivity of the nitrenes is utilized to tether the AuNP to the native surface of carbon nanotubes, and reduce graphene oxide and micro‐diamond powder, likely via addition to π‐conjugated carbon skeleton or insertion into the functionalities at the surface, to yield the desired hybrid material without the need for pretreatment of the surface. The AuNP‐covalent hybrid materials are robust in that they survive vigorous washing and sonication. In the absence of photolysis no attachment occurs with the same N₃‐AuNP. The nanohybrid AuNP‐nanohybrid materials are characterized using a combination of TEM, powder XRD, XPS and UV/Vis and IR spectroscopies. All of the characterization studies confirm the uniform incorporation of the AuNP on the irradiated substrates.     

Tunable Catalytic Performance and Selectivity of a Nanoparticle–Graphene Composite through Finely Controlled Nanoparticle Loading

Graphene‐based composites offer enhanced catalytic performance of metal and semiconductor nanoparticles, but their development is challenging because catalytic performance strongly depends on the structure and composition of the composite. Herein we show that the catalytic performance of a nanoparticle–graphene composite is very dependent on catalyst loading, which can be optimized for simultaneous enhancement of activity and selectivity. A glassy carbon working electrode has been modified with a gold nanoparticle–graphene (Au–G) composite with a varied number of gold nanoparticles per graphene, so that the conducting property of graphene and the electrocatalytic property of the metal were effectively coupled to give the best catalytic activity and selectivity. The modified electrode was used for simultaneous electrochemical detection of a mixture of electroactive species with high sensitivity. This result shows that the catalytic performance of a graphene‐based composite is sensitive to the catalyst loading and should be optimized for the best performance.     

Preparation of Amino-functionalized Multiwall Carbon Nanotube/Gold Nanoparticle Composites

Multiwall carbon nanotubes (MWNT) were modified orderly with carboxyl groups and amino groups. The MWNT/gold nanoparticle composites were formed when the amino‐functionalized MWNT was interacted with gold colloids. The functionalized MWNT was characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The amino‐functionalized MWNT allows further attaching gold nanoparticles through electrostatic interaction between the negatively charged gold nanoparticles and amino groups on the surface of the MWNT. The composite of gold nanoprticles and amino‐functionalized MWNT was characterized by transmission electron microscopy. This method decorating carbon nanotubes can be used to identify the location of functional groups, i.e. defect sites on carbon nanotubes.     

Catalytic Activation of a Solid Oxide in Electronic Contact With Gold Nanoparticles

Although inert in its bulk form, nanostructured gold supported on oxides has been found to be catalytically active. In many cases, the oxide promotes the activity of Au. It is now shown that in turn, nanoscale Au particles can chemically activate the solid oxide. Specifically, it was discovered that 4 nm Au nanoparticles deposited on zinc oxide catalyze the transformation of the oxide into the sulfide in the presence of an organosulfur species. Contact of the oxide with Au nanoparticles lowers the activation barrier for the solid‐state reaction by approximately 20 kJ mol^?1, allowing the reaction to be achieved closer to ambient temperatures. Electron transfer from oxygen vacancies to Au nanoparticles is proposed to generate acidic sites on the surface of the zinc oxide, resulting in the enhanced reactivity of the oxide. Knowledge of such electronic interactions between the noble metal and oxide can be exploited for engineering reactive heterostructures for low‐temperature pollutant sorption and hydrocarbon processing.