Amphiphilic polymer brushes grafted onto gold nanoparticles impart distinct solvent‐responsive behavior via the change to particle size and surface chemistry and, therefore, wide application prospects can be expected. Coarse‐grained simulations are performed for block and/or mixed polystyrene (PS)/poly(ethylene oxide) (PEO)‐modified amphiphilic gold nanoparticles (AuNP) to investigate their responsive behavior in five different solvents by analyzing their morphology, distribution density profiles, and gyration radii. Typical core–shell, Janus‐type, buckle‐like, ring‐like, jellyfish‐like, and octopus‐like morphologies are formed. Influence of block sequence, mixing mode, and several other effects are discussed. Responsive particle size and surface hydrophilicity can be successfully reproduced by altering solvents.
Stable nanoparticle vesicles were for the first time prepared from adamantyl‐ and cyclodextrin (CD)‐modified silica nanoparticles forming host–guest interactions in aqueous solution. Adamantyl‐functionalized nanoparticles were obtained from thiol‐isocyanate reaction of thiol‐modified nanoparticles with 1‐adamantyl isocyanate. The CD modified silica particles were isolated from a reaction of mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin with the thiol functionalized silica under microwave conditions in basic media. The obtained particles were characterized in respect of agglomeration and self‐assembly behavior in aqueous solution by dynamic light scattering and transmission electron microscopy. The found vesicle structures are exceptionally stable even after evaporation of water. Such inorganic hollow spheres formed through self‐assembly processes may be important for chemical storage and transport. The technique of chemically‐driven assembly is an attractive option to form useful complex structures by tunable agglomeration.
Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol−1 is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.
A facile approach is proposed to one‐pot synthesis of two kinds of nanoparticles: a new type of PS nanobowls (a hole appearing at the bottom of nanobowl) and PS/silica hybrid multipod‐like nanoparticles. The two type of nanoparticles generated together during polymerization could be separated easily by centrifugation. Furthermore, the structure of nanobowls could be easily controlled by the weight ratio of monomer/silica. In addition, we find that the multipod‐like nanoparticles play important roles in hydrophobic properties. The water contact angle increased from 24.0° to 143.3° after coated with the multipod‐like nanoparticles.
Some new water‐soluble bis‐porphyrins, constituted of two porphyrin units spaced by means of aliphatic bridges of different lengths, were synthesized and characterized by MALDI‐TOF mass spectrometry, 1H NMR and UV‐vis spectroscopy. The hydrosolubility of these uncharged compounds was guaranteed from the presence of six long PEG chains bound on the peripheral positions of the two porphyrins. Cobalt and zinc derivatives were also prepared. In the case of Co‐bis‐porphyrin, the appearance of induced circular dichroism (ICD) signals in water solution confirmed the formation of stable complexes with some amino acids, in which the bis‐porphyrin behaves like molecular tweezers.
A series of organic‐inorganic hybrid particles were synthesized by a self‐assembled layer of different initiators, immobilized on silica particles and used for controlled radical polymerization. We use three different initiator systems for atom‐transfer radical polymerization (ATRP), unimolecular nitroxide mediated polymerization (NMP), and bimolecular NMP, for the development of the hybrid inorganic/organic particles. After preliminary qualitative characterization by X‐ray spectroscopy (XPS) and Fourier‐transformed infrared (FT‐IR) measurements, the hybrid nanoparticles were studied by thermogravimetric analysis (TGA) to determine and discuss the initiator graft density in terms of steric hindrance.
The coupling agents employed for the various approaches used here: a) NMP1‐bimolecular system, b) NMP2‐unimolecular system, and c) ATRP. 相似文献
We have created a new functional biosensor coating composed of polyelectrolyte multilayers containing gold nanoparticles. This gold‐hybridized polyelectrolyte multilayer film possesses a stable nanoporous structure under physiological conditions. Antibody molecules were successfully conjugated onto the gold nanoparticles within the film. This functional coating successfully extinguished false signals from non‐specific binding of proteins and cells and also provided highly enhanced detection sensitivity. Furthermore, the drastic differences in protein and cellular adhesion properties between a chip coated with the nanoporous PEM film and a bare chip demonstrate that morphological control of biological interactions on chip surfaces is possible.
A new method to control the morphology and functionality of micelles is reported. Triblock copolymer micelles with atom transfer radical polymerization initiators at the interface are prepared in aqueous solution. After in‐situ polymerization at the interface, the structures of the interface and corona change, and micelles with PDMAEMA‐PEG comb–coil coronal chains are obtained. In aqueous solution, the pH exerts an influence on the morphology of the micelles. The coronal chains adopt different conformations at different pH values. Upon drying, the two coronal chains phase separate and form nanometer‐sized domains.
We have synthesized a “universal ligand” incorporating a phosphonate surface anchor and a terminal alkyne moiety which binds to TiO2 nanoparticles and exhibits excellent dispersity in organic solvents. The alkyne functionality permits attachment of azide terminated polymer shells using “click” chemistry. Thus TiO2 core nanoparticles have been encapsulated with both polystyrene and poly(t‐butyl acrylate) shells. The TiO2‐poly(t‐butyl acrylate) core shell nanoparticles are amenable to further chemical transformation into TiO2‐poly(acrylic acid) nanoparticles through ester hydrolysis. These TiO2‐polyacrylic acid nanoparticles are dispersible in aqueous solution. The resulting core‐shell nanoparticles have been incorporated as high K dielectric films in capacitor and organic thin film transistor devices and are promising new materials for flexible electronics applications.
The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.
A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.
The effect of PAMAM dendrimers (generations G3, G4 and G5) on the fibrillation of α‐synuclein was examined by fluorescence and CD spectroscopy, TEM and SANS. PAMAM dendrimers inhibited fibrillation of α‐synuclein and this effect increased both with generation number and PAMAM concentration. SANS showed structural changes in the formed aggregates of α‐synuclein – from cylindrical to dense three‐dimensional ones – as the PAMAM concentration increased, on account of the inhibitory effect. PAMAM also effectively promoted the breaking down of pre‐existing fibrils of α‐synuclein. In both processes – that is, inhibition and disassociation of fibrils – PAMAM redirected α‐synuclein to an amorphous aggregation pathway.
Carbon black (CB) nanoparticles were encapsulated by poly(vinyl alcohol) (PVA) by a simple method of coacervation. Transmission electron microscopy (TEM) images clearly demonstrated that the successful encapsulation of PVA happened at the surfaces of CB nanoparticles. The particle‐size distribution measurements indicated that the diameters of the obtained PVA‐encapsulated CB (CB@PVA) nanoparticles were distributed within the nanoscale dimension. This strategy avoids the complicated polymerization process involved in the counterpart of polymer‐coating approaches.
A TEM image of PVA‐encapsulated carbon black. 相似文献
An organosilane with an alkyne group at the non‐condensable end, [(2‐propynylcarbamate)propyl]triethoxysilane, has been synthesized. Condensation of this organosilane with tetraethoxysilane can be achieved by a co‐condensation strategy to produce silica nanoparticles with surface alkyne functionality. The size and uniformity of size distribution of the silica nanoparticles are influenced by varying the concentration of the added organosilane. The alkyne‐functionalized silica nanoparticles are coupled directly with azide‐modified polymers by ‘click chemistry’ to yield organic–inorganic hybrid nanomaterials.
Linear and crosslinked betaine‐type polyampholytes based on ethyl 3‐aminocrotonate and unsaturated carboxylic acids have been synthesized by very fast polymerization in bulk and solution. Bulk polymerization occurred exothermically even at room temperature and without adding an initiator. The polyampholytes showed stimuli‐responsive properties with respect to pH, ionic strength, water/organic solvent mixtures, and metal ion complexation.
Temperature profile of the polymerization reaction for an equimolar mixture of CRO and AA with time in the absence of initiator. 相似文献
Summary: Crosslinkable composite microspheres were prepared by heterocoagulation of epoxy resin nanoparticles onto polystyrene microspheres. The corresponding hollow microspheres were created after removal of the core. The surface morphology was tunable from smooth to rough by controlling the degree of crosslinking of the shell nanoparticles. A positively charged polyelectrolyte could be easily adsorbed onto the composite microspheres to facilitate further synthesis, e.g., layer‐by‐layer deposition and a sol‐gel process to form inorganic materials.
An SEM image of the PS/EP/silica (where the EP was crosslinked slowly) microspheres after the cores have been removed. 相似文献
We report here a facile synthesis of high performance electro‐active polymer actuator based on a sulfonated polyimide with well‐defined silver electrodes via self‐metallization. The proposed method greatly reduces fabrication time and cost, and obviates a cation exchange process required in the fabrication of ionic polymer‐metal composite actuators. Also, the self‐metallized silver electrodes exhibit outstanding metal‐polymer adhesion with high conductivity, resulting in substantially larger tip displacements compared with Nafion‐based actuators.
A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.
Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.
The effects of temperature and solvent on the β‐phase formation and energy transfer in an Ir(III) complex‐containing polyfluorene were investigated. Efficient energy transfer from polyfluorenes host to Ir complexes guest can be realized at low temperature. The formation of β‐phase was observed both in THF solution at low temperature and as suspended nano‐particles at room temperature. In addition, phosphorescent polymer nanoparticles were prepared successfully and exhibited efficient phosphorescent emission.
