Preparation of polyHIPE via CuAAC “click” chemistry and its application as a highly efficient adsorbent of Cu(II) ions

A hydrophilic emulsion‐templated porous polymer (polyHIPE) is synthesized by CuAAC “click” chemistry. Herein, a 4,4′‐diazidostilbene‐2,2′‐disulfonic acid disodium salt‐4H₂O (DAS) and tripropargylamine in the mixture of water and N,N‐dimethylformamide solution is used as external phase of the high internal phase emulsion template, and paraffin liquid is involved as the internal phase. The resulting polyHIPE has a well‐defined interconnected pore structure, which could be tailored by changing preparation parameters, such as reagent content, internal phase volume fraction, and surfactant concentration. Thermal analysis shows that the polyHIPE is stable under 180 °C. Owing to the presence of a large number of sodium sulfonate groups from the reagent DAS and the triazoles groups produced in the reaction, the polyHIPE is proved to be a highly efficient adsorbent of heavy metal ion (i.e., up to 52 mg/g for Cu(II) ions) in water. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2129–2135     

pH‐Induced Inversion of Water‐in‐Oil Emulsions to Oil‐in‐Water High Internal Phase Emulsions (HIPEs) Using Core Cross‐Linked Star (CCS) Polymer as Interfacial Stabilizer

A pH‐responsive core cross‐linked star (CCS) polymer containing poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) arms was used as an interfacial stabilizer for emulsions containing toluene (80 v%) and water (20 v%). In the pH range of 12.1‐9.3, ordinary water‐in‐oil emulsions were formed. Intermediate multiple emulsions of oil‐in‐water‐in‐oil and water‐in‐oil‐in‐water were formed at pH 8.6 and 7.5, respectively. Further lowering the pH resulted in the formation of gelled high internal phase emulsions of oil‐in‐water type in the pH range of 6.4‐0.6. The emulsion behavior was correlated with interfacial tension, conductivity and configuration of the CCS polymer at different pH.

     

High‐Internal‐Phase Pickering Emulsions Stabilized Solely by Peanut‐Protein‐Isolate Microgel Particles with Multiple Potential Applications

High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering.     

Hydrophilic polymer foams with well‐defined open‐cell structure prepared from pickering high internal phase emulsions

Open‐cell hydrophilic polymer foams are prepared through oil‐in‐water Pickering high internal phase emulsions (HIPEs). The Pickering HIPEs are stabilized by commercial titania (TiO₂) nanoparticles with adding small amounts of non‐ionic surfactant Tween85. The morphologies, such as average void diameter and interconnectivity, of the foams can be tailored easily by varying the TiO₂ nanoparticles and Tween85 concentrations. Further, investigation of the HIPE stability, emulsion structure and the location of TiO₂ nanoparticles in resulting foams shows that the surfactant tends to occupy the oil‐water interface at the contact point of adjacent droplets, where the interconnecting pores are hence likely to be formed after the consolidation of the continuous phase. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation of macroporous hydrophobic materials filled with aligned porous hydrophilic domain via emulsion‐templated and unidirectional freezing technique

A new class of porous materials, having hydrophobic scaffold embedded with aligned porous hydrophilic domains, was in situ fabricated through combination of emulsion‐templated method and unidirectional freezing technique. A water‐in‐oil high internal phase emulsion (HIPE) was prepared with the mixture of styrene and divinylbenzene as continuous phase and a poly(vinyl alcohol) (PVA) aqueous solution as dispersed phase. After polymerization of the continuous phase and subsequently unidirectional freezing, the dispersed phase, a macroporous poly(styrene/divinylbenzene) embedded with an aligned PVA domain, was obtained. The effects of the polymerization temperature, PVA concentration, and freezing rate on these porous materials were investigated. It was found that the PVA domain size and the aligned channel size were dependent on the polymerization temperature, the PVA concentration, and freezing rate. The fabrication method in this work, combining of unidirectional freezing and emulsion template, not only allows to prepare hydrophobic–hydrophilic polyHIPEs having a sea island structure but also dramatically improves the stiffness and specific surface area of the resulting polyHIPEs. Copyright © 2017 John Wiley & Sons, Ltd.     

In Situ Generated Janus Fabrics for the Rapid and Efficient Separation of Oil from Oil‐in‐Water Emulsions

A cotton fabric was coated with a polymer that contains both poly(dimethyl siloxane) (PDMS) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA). When the repeat unit number of PDMS is about three‐fold that of PDMAEMA and the fabric is exposed to air, the fabric is superhydrophobic because PDMS in the coating covers the PDMAEMA chains. Upon contact with an oil‐in‐water emulsion, the water‐soluble PDMAEMA rises to the top and the side in contact with the emulsion becomes hydrophilic. The emerged PDMAEMA chains then cause the emulsion droplets to coagulate, and the aggregated oil fills the pores on the superhydrophobic side of the fabric. The oil‐impregnated side remains hydrophobic even upon prolonged contact with water. Thus, a Janus fabric is elegantly generated in situ and sustained. This easy‐to‐prepare Janus fabric rapidly and efficiently separates oil from emulsions and may find practical applications.     

Preparation of emulsion‐templated fluorinated polymers and their application in oil/water separation

A series of emulsion‐templated fluorinated polymers (polyHIPEs) were first synthesized with introducing 2‐(perfluorohexyl)ethyl methacrylate (PEM) to the external phase of water‐in‐styrene high internal phase emulsion (HIPE) templates. The morphology (i.e., void size and its distribution) of these porous materials could be tuned simply by changing PEM and/or surfactant amount. The synergistic effect between the surface chemistry and surface architecture allowed the polyHIPEs to possess hydrophobicity with a water contact angle of 151°. The superhydrophobicity and oleophilicity of the polyHIPEs, together with their highly open porous structure, make the material a very competitive candidate as a filtration material for oil/water separation in practice with the efficiency of separating dichloromethane from the oil/water mixture of 95%. Such oil/water separating capacity was maintained after 10 cycles of filtration of oil/water, indicating the cyclic usage of the polyHIPE is feasible. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1508–1515     

Porosity control in high internal phase emulsion templated polyelectrolytes via ionic crosslinking

A series of novel macroporous materials based on poly(N‐isopropylacrylamide)‐b‐sodium polyacrylate is synthesized via aqueous reversible addition‐fragmentation chain transfer polymerization in an oil‐in‐water high internal phase emulsion (HIPE) utilizing both covalent and ionic crosslinkers (PEG diacrylate and calcium diacrylate, respectively). Porosity is directly related to the calcium diacrylate content of the polyHIPE. Depth profiling XPS of pressed samples reveal the segregation of less polar substituents (PNIPAM, PEGDA) to the interface, whereas ionic components are located deeper within the continuous aqueous phase, primarily driven by ionic strength. This segregation of components stabilizes the internal‐continuous phase interface and results in decreased void diameter. Calcium diacrylate also forms ionic crosslinks in the polyHIPE material, resulting in increased interconnecting pore diameter due to volume contraction upon polymerization. Evidence of volume contraction is provided by the stress induced on PEG at the o/w interface by internally located calcium polyacrylate crosslinks, resulting in a decrease in XRD peak intensity. It is therefore proposed that calcium diacrylate is capable of modifying polyHIPE morphology via two separate mechanisms. Published 2016 1 . Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2486–2492     

Cross‐Linking Density and Temperature Effects on the Self‐Assembly of SiO2—PNIPAAm Core–Shell Particles at Interfaces

SiO₂–PNIPAAm core–shell microgels (PNIPAAm=poly(N‐isopropylacrylamide)) with various internal cross‐linking densities and different degrees of polymerization were prepared in order to investigate the effects of stability, packing, and temperature responsiveness at polar–apolar interfaces. The effects were investigated using interfacial tensiometry, and the particles were visualized by cryo‐scanning electron microscopy (SEM) and scanning force microscopy (SFM). The core–shell particles display different interfacial behaviors depending on the polymer shell thickness and degree of internal cross‐linking. A thicker polymer shell and reduced internal cross‐linking density are more favorable for the stabilization and packing of the particles at oil–water (o/w) interfaces. This was shown qualitatively by SFM of deposited, stabilized emulsion droplets and quantitatively by SFM of particles adsorbed onto a hydrophobic planar silicon dioxide surface, which acted as a model interface system. The temperature responsiveness, which also influences particle–interface interactions, was investigated by dynamic temperature protocols with varied heating rates. These measurements not only showed that the particles had an unusual but very regular and reversible interface stabilization behavior, but also made it possible to assess the nonlinear response of PNIPAAm microgels to external thermal stimuli.     

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Preparation of remarkably tough polyHIPE materials via polymerization of oil‐in‐water HIPEs involving 1‐vinyl‐5‐aminotetrazole

Interconnected microcellular polymeric monoliths having unexpected high mechanical strength have been prepared using the high internal phase emulsion (HIPE) methodology. Oil‐in water concentrated emulsions of aqueous 1‐vinyl‐5‐amino [1,2,3,4]tetrazole (1‐VAT) mixed with a low molar ratio (7%) of N,N′‐methylenebisacrylamide as crosslinking agent were prepared using dodecane as dispersed phase and a mixture of hydrophilic surfactants. “Reverse” polyHIPE materials were obtained after radical copolymerization, solvent extraction, and drying. Their morphology, chemical composition, and physicochemical behavior are discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2942–2947, 2010     

Ionic Liquids as Internal Phase for Non‐Aqueous PolyHIPEs

Stable high internal phase emulsions (HIPEs) with the ionic liquid 1‐ethyl‐3‐methylimidazolium bis(trifluoromethyl‐sulfonyl)imide as dispersed phase were prepared and polymerised thermally into polyHIPEs. All polyHIPEs exhibited pore morphologies similar to that of polyHIPEs obtained with an aqueous dispersed phase. PolyHIPEs containing the dispersed phase possess a low T_g and are thermally stable in excess of 200 °C, offering the potential for new porous materials where water as dispersed phase is chemically or physically undesirable.     

Dendritic amphiphile‐decorated polyHIPE as a highly efficient and well recyclable scavenger of micropollutants in water: Topological effect

It is found herein that topology of amphiphiles immobilized on a porous solid of poly(high internal phase emulsion) (HIPE and polyHIPE) is critical to extraction pollutants from water. N‐alkylation of branched polyethylenimine (bPEI) with a glycidyl‐capped polymer of poly(styrene‐co ?2‐ethylhexyl acrylate) [P(S‐EHA)] results in a dendritic amphiphile of bPEI@P(S‐EHA), and a comb‐like counterpart (lPEI@P(S‐EHA) is similarly prepared by replacing bPEI with a linear PEI (lPEI). Each amphiphile can act as a stabilizer to directly prepare polyHIPE whose surface is dictated by the respective amphiphile. It is found that bPEI@P(S‐EHA)‐dictated polyHIPE can be over 50‐fold stronger to eliminate anionic dyes from water than the linear counterpart, indicating a significant topological effect. The optimized adsorbent is over 10,000‐fold stronger to bind a dye than a representative adsorbent, thus may deal with trace pollutants in water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1294–1302     

Polysaccharide‐Based Oleogels Prepared with an Emulsion‐Templated Approach

The preparation and characterization of oleogels structured by using a combination of a surface‐active and a non‐surface‐active polysaccharide through an emulsion‐templated approach is reported. Specifically, the oleogels were prepared by first formulating a concentrated oil‐in‐water emulsion, stabilized with a combination of cellulose derivatives and xanthan gum, followed by the selective evaporation of the continuous water phase to drive the network formation, resulting in an oleogel with a unique microstructure and interesting rheological properties, including a high gel strength, G′>4000 Pa, shear sensitivity, good thixotropic recovery, and good thermostability.     

Intercalation of Sulfanilic Acid‐Phenol‐Formaldehyde Polycondensate into Hydrocalumite Type Layered Double ­Hydroxide

Polycondensates containing sulfonate groups, referred to as concrete superplasticizers, are widely used in the construction industry. A sulfanilic acid–phenol–formaldehyde polycondensate (SPF) with M_w ≈ 100.000 g · mol^–1 was synthesized from sulfanilic acid, phenol and formaldehyde by polycondensation reaction, and its intercalation into hydrocalumite type Layered Double Hydroxide (LDH) was investigated. Preparation was done by rehydration of tricalcium aluminate, a cement constituent, in the presence of the polymer. According to the XRD pattern, SPF was successfully intercalated. A d value of approx. 2.6 nm was found. Elemental composition of the new organo‐mineral phase reveals charge balancing of the cationic LDH main layers by the polycondensate. Thermogravimetry indicates that thermal degradation of intercalated SPF occurs at higher temperature, compared to non‐intercalated SPF. According to SEM imaging, the novel Ca‐Al‐LDH phase exhibits the morphology of intergrown platelets. Ultra‐thin nanosheets (foils) with approx. 50 nm thickness were obtained. The layered structure and d value obtained from diffraction analysis were confirmed by TEM imaging. The new hydride can be used as cement and concrete additive.     

Formation of Concentrated Nanoemulsions by Extreme Shear

Abstract

We have systematically investigated the production of “nanoemulsions,” droplets of one liquid phase in another immiscible liquid phase that have diameters less than 100 nm. Our approach relies on a combination of extreme shear due to multipass, high‐pressure microfluidic injection and systematic control of the emulsion's composition. By repeatedly shearing a silicone oil‐in‐water emulsion in an inhomogeneous extensional shear flow, the multipass approach enables us to reduce the droplet polydispersity and average radius. Using dynamic light scattering, we study the changes in the average radius, ?a?, as a function of the number of passes, driving injection pressure (i.e., shear rate), droplet volume fraction, surfactant concentration, and droplet oil viscosity. The smallest nanoemulsion that we obtain has ?a?=18 nm. At large droplet volume fractions φ≥0.65, we observe phase inversion, rather than a reduction in the droplet size. This provides evidence that droplet coalescence can occur during extreme shear, even when a significant excess of a strongly stabilizing surfactant is present.     

Preparation of novel suspensions of ZnO/living block copolymer latex nanoparticles via pickering emulsion polymerization and their long term stability

In this work, we present the first Pickering emulsion polymerization with a controlled/living character. Pickering emulsion polymerization in the presence of a novel suspension of zinc oxide/poly(sodium 4‐styrenesulfonate) (ZnO/PSS^?) nanocomposite particles was applied to prepare ZnO/living block copolymer latexes. In the emulsion system, 1,1‐diphenylethene (DPE)‐controlled radical polymerization of poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) was proceeded in oil phase. The nanocomposite particles of ZnO/PSS^? with an average diameter of 20 nm and negatively charged zeta potential around ?30 mV were synthesized via hydrothermal method then served as an effective emulsion stabilizer at the oil/water interface. Living polymerization was carried out using DPE‐capped PMMA as the macroinitiator and PMMA‐b‐PBA block copolymer latex was successfully prepared with coverage of ZnO/PSS^? nanoparticles. Narrow size distributions of the droplets as well as latex particles were obtained, and the livingness of block copolymers was comparable to that of emulsions stabilized by conventional surfactants. The controlled/living character in Pickering emulsion polymerization was slightly influenced by the amount of PSS^? immobilized into the ZnO/PSS^? nanoparticles, whereas it was significantly influenced by the weight ratios between ZnO/PSS^? and oil phase. The Pickering latexes showed excellent long term stability against either coalescence or sedimentation over several months. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

“Smart” molecularly imprinted monoliths for the selective capture and easy release of proteins

A new thermally switchable molecularly imprinted monolith for the selective capture and release of proteins has been designed. First, a generic poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) monolith reacted with ethylenediamine followed by functionalization with 2‐bromoisobutyryl bromide to introduce the initiator for atom transfer radical polymerization. Subsequently, a protein‐imprinted poly(N‐isopropylacrylamide) layer was grafted onto the surface of the monolithic matrix by atom transfer radical polymerization. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy of the cross‐sections of imprinted monoliths confirmed the formation of dense poly(N‐isopropylacrylamide) brushes on the pore surface. The imprinted monolith exhibited high specificity and selectivity toward its template protein myoglobin over competing proteins and a remarkably large maximum adsorption capacity of 1641 mg/g. Moreover, this “smart” imprinted monolith featured thermally responsive characteristics that enabled selective capture and easy release of proteins triggered only by change in temperature with water as the mobile phase and avoided use of stronger organic solvents or change in ionic strength and pH.     

Enzymatically Crosslinked Emulsion Gels Using Star‐Polymer Stabilizers

A novel type of emulsion gel based on star‐polymer‐stabilized emulsions is highlighted, which contains discrete hydrophobic oil and hydrophilic aqueous solution domains. Well‐defined phenol‐functionalized core‐crosslinked star polymers are synthesized via reversible addition‐fragmentation chain transfer (RAFT)‐mediated dispersion polymerization and are used as stabilizers for oil‐in‐water emulsions. Horseradish‐peroxidase‐catalyzed polymerization of the phenol moieties in the presence of H₂O₂ enables rapid formation of crosslinked emulsion gels under mild conditions. The crosslinked emulsion gels exhibit enhanced mechanical strength, as well as widely tunable composition.