Structural Diversity in the Self‐Assembly of Pseudopeptidic Macrocycles

The self‐assembling abilities of several pseudopeptidic macrocycles have been thoroughly studied both in the solid (SEM, TEM, FTIR) and in solution (NMR, UV, CD, FTIR) states. Detailed microscopy revealed large differences in the morphology of the self‐assembling micro/nanostructures depending on the macrocyclic chemical structures. Self‐assembly was triggered by the presence of additional methylene groups or by changing from para to meta geometry of the aromatic phenylene backbone moiety. More interestingly, the nature of the side chain also plays a fundamental role in some of the obtained nanostructures, thus producing structures from long fibers to hollow spheres. These nanostructures were obtained in different solvents and on different surfaces, thus implying that the chemical information for the self‐assembly is contained in the molecular structure. Dilution NMR studies (chemical shift and self‐diffusion rates) suggest the formation of incipient aggregates in solution by a combination of hydrogen‐bonding and π–π interactions, thus implicating amide and aryl groups, respectively. Electronic spectroscopy further supports the π–π interactions because the compounds that lead to fibers show large hypochromic shifts in the UV spectra. Moreover, the fiber‐forming macrocycles also showed a more intense CD signature. The hydrogen‐bonding interactions within the nanostructures were also characterized by attenuated total‐reflectance FTIR spectroscopy, which allowed us to monitor the complete transition from the solution to the dried nanostructure. Overall, we concluded that the self‐assembly of this family of pseudopeptidic macrocycles is dictated by a synergic action of hydrogen‐bonding and π–π interactions. The feasibility and geometrical disposition of these interactions finally render a hierarchical organization, which has been rationalized with a proposal of a model. The understanding of the process at the molecular level has allowed us to prepare hybrid soft materials.     

Multicolour Self‐Assembled Fluorene Co‐Oligomers: From Molecules to the Solid State via White‐Light‐Emitting Organogels

Five fluorene‐based co‐oligomers have been prepared to study their self‐assembly in a wide range of concentrations, from dilute solutions to the solid state. Subtle changes to the chemical structures, introduced to tune the emission colours over the entire visible range, induce strong differences in aggregation behaviour. Only two of the fluorescent co‐oligomer derivatives self‐assemble to form soluble fibrils from which fluorescent organogels emerge at higher concentrations. In contrast, the other compounds form precipitates. Mixed fluorescent co‐oligomer systems exhibit partial energy transfer, which allows the creation of white‐light‐emitting gels. Finally, a mechanism for the hierarchical self‐assembly of this class of materials is proposed based on experimental results and molecular modelling calculations.     

Chemistry of Anthracene–Acetylene Oligomers XXV: On‐Surface Chirality of a Self‐Assembled Molecular Network of a Fan‐Blade‐Shaped Anthracene–Acetylene Macrocycle with a Long Alkyl Chain

An anthracene cyclic dimer with two different linkers and a dodecyl group was synthesized by means of coupling reactions. The calculated structure had a planar macrocyclic π core and a linear alkyl chain. Scanning tunneling microscopy observations at the 1‐phenyloctane/graphite interface revealed that the molecules formed a self‐assembled monolayer that consisted of linear striped bright and dark bands. In each domain, the molecular network consisted of either Re or Si molecules that differed in the two‐dimensional chirality about the macrocyclic faces, which led to a unique conglomerate‐type self‐assembly. The molecular packing mode and the conformation of the alkyl chains are discussed in terms of the intermolecular interactions and the interactions between the molecules and the graphite surface with the aid of MM3 simulations of a model system.     

Hollow Cu‐NP Spheres Made from Electroless Cu Deposition with Colloidal Particles as Templates

Summary: Hollow copper nanoparticle (Cu‐NP) spheres with different wall thicknesses were prepared with organic and inorganic colloids as core combining self‐assembly and electroless Cu deposition techniques. The hollow Cu‐NP spheres made from polymeric colloids possessed a thicker wall but were easy to break in the removal of the core by THF, while those from SiO₂ colloids had thinner wall and remained intact in the removal of the core by HF.

TEM image of the hollow Cu‐NP spheres.     

Self‐Templated Formation of Uniform NiCo2O4 Hollow Spheres with Complex Interior Structures for Lithium‐Ion Batteries and Supercapacitors

Despite the significant advancement in preparing metal oxide hollow structures, most approaches rely on template‐based multistep procedures for tailoring the interior structure. In this work, we develop a new generally applicable strategy toward the synthesis of mixed‐metal‐oxide complex hollow spheres. Starting with metal glycerate solid spheres, we show that subsequent thermal annealing in air leads to the formation of complex hollow spheres of the resulting metal oxide. We demonstrate the concept by synthesizing highly uniform NiCo₂O₄ hollow spheres with a complex interior structure. With the small primary building nanoparticles, high structural integrity, complex interior architectures, and enlarged surface area, these unique NiCo₂O₄ hollow spheres exhibit superior electrochemical performances as advanced electrode materials for both lithium‐ion batteries and supercapacitors. This approach can be an efficient self‐templated strategy for the preparation of mixed‐metal‐oxide hollow spheres with complex interior structures and functionalities.     

Solvent‐induced self‐assembly in cardanol‐based urethane methacrylate comb polymers

We report side chain urethane–methacrylate comb polymers based on the renewable resource cardanol and its saturated analogue 3‐pentadecyl phenol and their self‐assembly into pores, spheres, vesicles, tubes, and so forth. The monomers were synthesized in one pot by coupling 1 equiv. of isophorone diisocyanate with 1 equiv. of cardanol/pentadecyl phenol followed by coupling with 1 equiv. of hydroxyethyl methacrylate. They were polymerized free radically using benzoyl peroxide as the initiator and were characterized by NMR and FTIR, and their molecular weights were determined by gel permeation chromatography. The unique polymer design had sites for self‐organization via hydrogen bonding of the side chain urethane units, π–π stacking interactions of the aromatic units as well as interdigitation of the long C₁₅ alkyl side chains in the polymer. The morphologies of solvent cast polymer films were studied using microscopic techniques such as scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The polymers exhibited three‐dimensional honeycomb morphology in CHCl₃, whereas in tetrahydrofuran, they formed spheres. The direct cardanol‐derived polymer PCIH showed a tendency for multiple morphologies such as spheres and tubes in tetrahydrofuran. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2996–3009, 2009     

Surfactant‐Free Self‐Assembly of Nanocrystals into Ellipsoidal Architectures

A simple approach to control the self‐assembly of ZnS nanocrystals into well‐defined, uniform, three‐dimensional, micrometer‐scale, solid ellipsoidal structures with rattle‐type, multishelled, and hollow architectures is presented. There is no surfactant or small molecule to assist the self‐assembly of the nanocrystals. A possible mechanism of the controlled self‐assembly is proposed. The growth process can be divided into two stages: 1) the formation of ellipsoidal architectures via oriented aggregation, the growth kinetics of which is primarily attributed to the charge–charge, charge–dipole, and dipole–dipole interactions of preformed ZnS nanocrystals; and 2) Ostwald ripening, which results in multishelled, rattle‐type, and hollow structures. This self‐assembly concept is also applicable to other metal sulfides.     

Formation of Triple‐Shelled Molybdenum–Polydopamine Hollow Spheres and Their Conversion into MoO2/Carbon Composite Hollow Spheres for Lithium‐Ion Batteries

Unique triple‐shelled Mo‐polydopamine (Mo‐PDA) hollow spheres are synthesized through a facile solvothermal process. A sequential self‐templating mechanism for the multi‐shell formation is proposed, and the number of shells can be adjusted by tuning the size of the Mo‐glycerate templates. These triple‐shelled Mo‐PDA hollow spheres can be converted to triple‐shelled MoO₂/carbon composite hollow spheres by thermal treatment. Owing to the unique multi‐shells and hollow interior, the as‐prepared MoO₂/carbon composite hollow spheres exhibit appealing performance as an anode material for lithium‐ion batteries, delivering a high capacity of ca. 580 mAh g^?1 at 0.5 A g^?1 with good rate capability and long cycle life.     

Microwave‐Assisted Solvothermal Synthesis of VO2 Hollow Spheres and Their Conversion into V2O5 Hollow Spheres with Improved Lithium Storage Capability

Monodispersed hierarchically structured V₂O₅ hollow spheres were successfully obtained from orthorhombic VO₂ hollow spheres, which are in turn synthesized by a simple template‐free microwave‐assisted solvothermal method. The structural evolution of VO₂ hollow spheres has been studied and explained by a chemically induced self‐transformation process. The reaction time and water content in the reaction solution have a great influence on the morphology and phase structure of the resulting products in the solvothermal reaction. The diameter of the VO₂ hollow spheres can be regulated simply by changing vanadium ion content in the reaction solution. The VO₂ hollow spheres can be transformed into V₂O₅ hollow spheres with nearly no morphological change by annealing in air. The nanorods composed of V₂O₅ hollow spheres have an average length of about 70 nm and width of about 19 nm. When used as a cathode material for lithium‐ion batteries, the V₂O₅ hollow spheres display a diameter‐dependent electrochemical performance, and the 440 nm hollow spheres show the highest specific discharge capacity of 377.5 mAhg^?1 at a current density of 50 mAg^?1, and are better than the corresponding solid spheres and nanorod assemblies.     

Self‐Assembly of Rod–Coil Polyethylenimine–Poly(ethylene glycol)–α‐Cyclodextrin Inclusion Complexes into Hollow Spheres and Rod‐Like Particles

This paper describes the self‐assembly of rod–coil inclusion complexes, polyethylenimine–poly(ethylene glycol)–α‐cyclodextrin (PEI–PEG–α‐CD). It is demonstrated that α‐CDs should exclusively thread on the PEG block in PEI–PEG copolymers and the resulting complexes have both rigid block (PEG–α‐CD) and coil block (protonated PEI). By varying the rigid block fraction, aggregates with hollow spheres or rod‐like particles could be formed simply by self‐assembly in aqueous solution.     

The Effect of Hydrophile Topology in RAFT‐Mediated Polymerization‐Induced Self‐Assembly

Polymerization‐induced self‐assembly (PISA) was employed to compare the self‐assembly of different amphiphilic block copolymers. They were obtained by emulsion polymerization of styrene in water using hydrophilic poly(N‐acryloylmorpholine) (PNAM)‐based macromolecular RAFT agents with different structures. An average of three poly (ethylene glycol acrylate) (PEGA) units were introduced either at the beginning, statistically, or at the end of a PNAM backbone, resulting in formation of nanometric vesicles and spheres from the two former macroRAFT architectures, and large vesicles from the latter. Compared to the spheres obtained with a pure PNAM macroRAFT agent, composite macroRAFT architectures promoted a dramatic morphological change. The change was induced by the presence of PEGA hydrophilic side‐chains close to the hydrophobic polystyrene segment.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Helical self‐assembly of 2‐(1,4,7,10‐tetraazacyclododecan‐1‐yl)cyclohexan‐1‐ol (cycyclen)

The title macrocyclic amino alcohol compound, C₁₄H₃₀N₄O, is investigated as a solid‐state synthon for the design of a self‐assembled tubular structure. It crystallizes in a helical column constructed by stereospecific O—H...N and N—H...N interactions. The hydrogen‐bonding interactions, dependent upon macrocyclic ring helicity and molecular conformation, link R,R and S,S enantiomers in a head‐to‐tail fashion, forming a continuous hydrophilic inner core.     

Emulsion‐Assisted Polymerization‐Induced Hierarchical Self‐Assembly of Giant Sea Urchin‐like Aggregates on a Large Scale

Hierarchical solution self‐assembly has become an important biomimetic method to prepare highly complex and multifunctional supramolecular structures. However, despite great progress, it is still highly challenging to prepare hierarchical self‐assemblies on a large scale because the self‐assembly processes are generally performed at high dilution. Now, an emulsion‐assisted polymerization‐induced self‐assembly (EAPISA) method with the advantages of in situ self‐assembly, scalable preparation, and facile functionalization was used to prepare hierarchical multiscale sea urchin‐like aggregates (SUAs). The obtained SUAs from amphiphilic alternating copolymers have a micrometer‐sized rattan ball‐like capsule (RBC) acting as the hollow core body and radiating nanotubes tens of micrometers in length as the hollow spines. They can capture model proteins effectively at an ultra‐low concentration (ca. 10 nm ) after functionalization with amino groups through click copolymerization.     

Biomolecule‐Assisted Construction of Cadmium Sulfide Hollow Spheres with Structure‐Dependent Photocatalytic Activity

In this study, we report the synthesis of monodispersive solid and hollow CdS spheres with structure‐dependent photocatalytic abilities for dye photodegradation. The monodispersive CdS nanospheres were constructed with the assistance of the soulcarboxymthyi chitosan biopolymer under hydrothermal conditions. The solid CdS spheres were corroded by ammonia to form hollow CdS nanospheres through a dissolution–reprecipitation mechanism. Their visible‐light photocatalytic activities were investigated, and the results show that both the solid and the hollow CdS spheres have visible‐light photocatalytic abilities for the photodegradation of dyes. The photocatalytic properties of the CdS spheres were demonstrated to be structure dependent. Although the nanoparticles comprising the hollow spheres have larger sizes than those comprising the solid spheres, the hollow CdS spheres have better photocatalytic performances than the solid CdS spheres, which can be attributed to the special hollow structure.     

A Self‐Assembly Phase Diagram from Amphiphilic Perylene Diimides

Supramolecular forces govern self‐assembly and further determine the final morphologies of self‐assemblies. However, how they control the morphology remains hitherto largely unknown. In this paper, we have discovered that the self‐assembled nanostructures of rigid organic semiconductor chromophores can be finely controlled by the secondary forces by fine‐tuning the surrounding environments. In particular, we used water/methanol/hydrochloric acid to tune the environment and observed five different phases that resulted from versatile molecular self‐assemblies. The representative self‐assembled nanostructures were nanotapes, nanoparticles and their 1D assemblies, rigid microplates, soft nanoplates, and hollow nanospheres and their 1D assemblies, respectively. The specific nanostructure formation is governed by the water fraction, R_w, and the concentration of hydrochloric acid, [HCl]. For instance, nanotapes formed at low [HCl] and R_w values, whereas hollow nanospheres formed when either the HCl concentration is high, or the water fraction is low, or both. The significance of this paper is that it provides a useful phase diagram by using R_w and [HCl] as two variables. Such a self‐assembly phase diagram maps out the fine control that the secondary forces have on the self‐assembled morphology, and thus allows one to guide the formation toward a desired nanostructure self‐assembled from rigid organic semiconductor chromophores by simply adjusting the two key parameters of R_w and [HCl].     

Multishelled Metal Oxide Hollow Spheres: Easy Synthesis and Formation Mechanism

Uniform multishelled NiO, Co₃O₄, ZnO, and Au@NiO hollow spheres were synthesized (NiO and Co₃O₄ hollow spheres for the first time) by a simple shell‐by‐shell self‐assembly allowing for tuning of the the size, thickness and shell numbers by controlling the heat treatment, glucose/metal salt molar ratio, and hydrothermal reaction time. These findings further the development of synthetic methodologies for multishelled hollow structures and could open up new opportunities for deeper understanding of the mechanisms of shell‐by‐shell self‐assembly. Moreover, the double‐shelled NiO hollow sphere exhibits a higher photocatalytic activity for degradation of methyl orange than its morphological counterparts.     

Hydrogen‐bonded supramolecular polymers from derivatives of α‐amino‐ε‐caprolactam: A bio‐based material

Hydrogen‐bonded supramolecular polymers were prepared from the derivatives of α‐amino‐ε‐caprolactam (ACL), obtained from a renewable resource. Several self‐complimentary bis‐ or tetra‐caprolactam monomers were synthesized by varying the number of carbons of the spacer between the hydrogen‐bonding end groups. Physical properties of these hydrogen‐bonded polymers were clearly demonstrated by differential scanning colorimetry, solid‐state NMR, and X‐ray powder diffraction analyses. The supramolecular behavior was also supported by fiber formation from the melt for several of these compounds, and stable glassy materials were prepared from the physical mixtures of two different biscaprolactams. The self‐association ability of ACL was also used by incorporating ACL at the chain ends of low‐molecular weight Jeffamine (M_n = 900 g/mol) using urea and amide linkages. The transformation of this liquid oligomer at room temperature into a self‐standing, transparent film clearly showed the improvement in mechanical properties obtained by the introduction of terminal hydrogen‐bonding groups. Finally, the use of monomers with a functionality of four gave rise to network formation either alone or combination with bifunctional monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Fabrication and properties of hollow poly(N‐isopropylacrylamide)‐Ag nanocomposite spheres

This article presents a strategy for the fabrication of hollow poly(N‐isopropylacrylamide) (PNIPAM)‐Ag nanocomposite spheres. In this approach, the thermosensitive PNIPAM hollow spheres were first synthesized via a one‐pot “self‐removing” process and then used as supporters for the coordination and in situ reduction of Ag⁺ ions. The results show that these hollow PNIPAM‐Ag nanocomposite spheres still have typical thermal sensitivity, and importantly, these spheres have very good and controllable catalytic activity with five stages of variation versus temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4919–4926, 2009     

Microenvironment‐Induced In Situ Self‐Assembly of Polymer–Peptide Conjugates That Attack Solid Tumors Deeply

In cancer treatment, the unsatisfactory solid‐tumor penetration of nanomaterials limits their therapeutic efficacy. We employed an in vivo self‐assembly strategy and designed polymer–peptide conjugates (PPCs) that underwent an acid‐induced hydrophobicity increase with a narrow pH‐response range (from 7.4 to 6.5). In situ self‐assembly in the tumor microenvironment at appropriate molecular concentrations (around the IC₅₀ values of PPCs) enabled drug delivery deeper into the tumor. A cytotoxic peptide KLAK, decorated with the pH‐sensitive moiety cis‐aconitic anhydride (CAA), and a cell‐penetrating peptide TAT were conjugated onto poly(β‐thioester) backbones to produce PT‐K‐CAA, which can penetrate deeply into solid tumors owing to its small size as a single chain. During penetration in vivo, CAA responds to the weak acid, leading to the self‐assembly of PPCs and the recovery of therapeutic activity. Therefore, a deep‐penetration ability for enhanced cancer therapy is provided by this in vivo assembly strategy.