Polyurethanes Containing Indole‐Based Non‐Linear Optical Chromophores: from Linear Chromophore to H‐Type

Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.

     

New Star‐Shaped Metallo‐Polymeric Chromophores

The synthesis of new star‐shaped polymers, prepared by atom transfer radical polymerization of methyl methacrylate with tris(dialkylaminostyryl‐2,2′‐bipyridine) zinc(II) and iron(II) metalloinitiators, is reported. Their thermal and optical (absorption and emission) properties are discussed.

Structure of the star‐shaped polymers.     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Acrylic,Elastomeric, Particle‐Dispersed Epoxy‐Clay Hybrid Nanocomposites: Mechanical Properties

Summary: Nanocomposites were formulated by curing a sonicated mixture of epoxy resin, C18 clay, and acrylic rubber dispersants. At 5.5 phr (parts per hundred) organoclay loading and a rubber concentration of 15 phr, the tensile‐failure strain of the nanocomposite was found to be higher than that of epoxy nanocomposite, rubber‐dispersed epoxy, and pristine epoxy. A plausible mechanism for improvement of the failure strain of nanocomposites is proposed.

Stress strain curves of filled and unfilled epoxy specimen.     

Polymer‐Based Rectifying Diodes on a Glass Substrate Fabricated by Ink‐Jet Printing

Summary: The fabrication of polymer diodes on a glass substrate by an ink‐jet printing technique is reported. Both an n‐type semiconductive polymer, poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐(1‐cyanovinylene)phenylene] (CN‐PPV), and a p‐type semiconductive polymer, polypyrrole (PPy) or poly(3,4‐ethylenedioxythiophene) (PEDOT), were printed through a piezoelectric ink‐jet printer. The printed CN‐PPV/PPy and CN‐PPV/PEDOT diodes showed good rectifying characteristics. These results indicate the potential of the low‐cost ink‐jet printing technique to produce polymer microelectronic devices and circuits.

Schematic diagram of the printed polymer diode     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Formation of Giant Needle‐Like Polycation‐Bile Acid Complexes

The complexation of bile acids with various solvated polycations was studied. A one‐to‐one complex was precipitated when an aqueous solution of cholic acid sodium salt (CA) was mixed with aqueous solutions of 3,3‐ionene and grew to form crystals with needle‐like morphology, 3 millimeters in length. Hydrogen bonding of hydroxyls at the steroid face and the spacing between cationic sites of polycations were crucial for the formation of the giant needle.

Crossed polarizing microscopic photograph of the complex composed of cholic acid sodium salt and 3,3‐ionene.     

Chemoenzymatic Synthesis of Polycaprolactone‐block‐Polystyrene via Macromolecular Chain Transfer Reagents

ε‐Caprolactone (CL) was enzymatically polymerized with 2‐mercaptoethanol as the initiator, both in an oil bath and under microwave (MW) irradiation. The polymerization performed under MW irradiation maintaining equal conditions led to higher yields and less formation of side products, i.e., a higher chemoselectivity was observed. The resulting polyester with a terminal  SH moiety had a of 3 600 g · mol⁻¹, determined by size exclusion chromatography (SEC), and was used as a chain transfer reagent. Subsequent copolymerization with styrene in different ratios led to polycaprolactone‐block‐polystyrene. SEC analysis and polarization microscopy of crystallized samples with different styrene contents proved the formation of block copolymers.

     

Highly Extensible Bio‐Nanocomposite Fibers

Here, we show that a poly(ethylene oxide) polymer can be physically cross‐linked with silicate nanoparticles (Laponite) to yield highly extensible, bio‐nanocomposite fibers that, upon pulling, stretch to extreme lengths and crystallize polymer chains. We find that both, nanometer structures and mechanical properties of the fibers respond to mechanical deformation by exhibiting strain‐induced crystallization and high elongation. We explore the structural characteristics using X‐ray scattering and the mechanical properties of the dried fibers made from hydrogels in order to determine feasibility for eventual biomedical use and to map out directions for further materials development.

     

A Lipase‐Responsive Vehicle Using Amphipathic Polymer Synthesized with the Lipase as Catalyst

We describe an enzyme‐responsive polymeric vehicle, which is of great interest in controlled drug delivery, biosensing, and other related areas. The polymer synthesized using lipase as catalyst in DMSO has a favorable molecular structure that is quickly hydrolyzed by lipase in aqueous phase, and allows a fast release of encapsulated molecules.

     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.

     

Post‐Synthesis Functionalization of (Meth)acrylate Based Monoliths via Electron Beam Triggered Graft Polymerization

Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g⁻¹ and 1.5 mg · g⁻¹. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.

     

Frozen‐In Magnetic Order in Uniaxial Magnetic Gels: Preparation and Physical Properties

We describe the preparation and characterization of uniaxial magnetic gels. Fibril formation of the embedded magnetic particles generates easily detectable magnetic and optical anisotropies. A finite magnetization is frozen‐in and leads to a ferromagnetic‐like response in small homogeneous external magnetic fields. We present, for the first time, frequency dependent measurements of the shear modulus G′. Despite their optical and magnetic anisotropy, the gels are mechanically isotropic.

The time‐dependent G′ for a ferrogel in the parallel orientation in a homogeneous field of 200 mT.     

A Polydiacetylene Supramolecular System That Emits Red,Green, and Blue Fluorescence

A polymer system based on polydiacetylene (PDA) supramolecules that emits red, green, and blue fluorescence has been constructed. The three‐color emitting system is comprised of red‐fluorescent PDA vesicles in which green‐fluorescent fluorescein molecules are encapsulated. Finally, the blue‐fluorescence component is introduced by reacting terminal amine groups on the PDA vesicle surfaces with fluorescamine. Thin PDA‐polymer‐containing poly(vinyl alcohol) films formed by using this strategy display red, green, and blue fluorescence upon excitation with light at specific wavelengths.

     

Ethylene and Ethylene/Propylene Polymerization Behavior of Bis(phenoxy‐imine) Zr and Hf Complexes with Perfluorophenyl Substituents

The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.

Structures of complexes 1 – 4 .     

Re‐Gradation of Photo‐Oxidized Post‐Consumer Greenhouse Films

Summary: The degradation undergone by the polymers during their use and because of the thermo‐mechanical degradation undergone during the reprocessing operations provokes, among other effects, the decrease of the molecular weight. The change of the molecular architecture is responsible for the deterioration of all the properties. In order to restore the properties of post‐consumer recycled plastics, some rebuilding of the molecular structure is necessary. In this work, photo‐oxidized films for greenhouses were reprocessed in presence of additives able to react with the polyethylene in order to form branching and cross‐linking, improving the properties of these post‐consumer plastic.

Pressure as a function of time in the mini twin‐screw extruder, processing speed 70 rpm.