Summary: In the present communication we describe a photolithographic method to produce polyaniline (PANI) patterns using PANI modified with a traceless removable functional group (nitrosated polyaniline, PANI‐NO) and external inexpensive polymeric photoacid generators (poly(vinyl chloride), PVC). Therefore, residual sub‐products created by irradiation of the plate do not remain occluded in the polymeric films. The borders of the patterns are better defined than in the case of chemical lithography using inorganic acids as the hydrolyzing agent.
Summary: A simple method to prepare surfactant‐free and solvent‐free semiconducting polymer particles by using an environmentally benign supercritical carbon dioxide (scCO2) process is reported. The process of the rapid expansion of supercritical solutions (RESS) is used to produce spherical particles of poly[2‐(3‐thienyl)acetyl 3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctanoate] (PSFTE), 50–500 nm in size, from 0.1–0.5 wt.‐% PSFTE solutions in CO2 at pre‐expansion temperatures of 40 °C and pre‐expansion pressures of 276 bar.
An FESEM image of PSFTE particles produced by the RESS process with CO2. 相似文献
Novel glucosamine hydrochloride functionalized water‐soluble conjugated polyfluorene was easily synthesized through Cu(I)‐catalyzed azide/alkyne “click” ligation and Suzuki coupling polymerization. The water‐solubility and biocompatibility of the polymer were improved after grafting glucosamine hydrochloride to the side chains of the conjugated polymer. As a fluorescent model system of chitosan, its interaction with single‐stranded DNA was studied by spectrofluorometric titration.
The helical mechanoclinic deformation of a main‐chain chiral smectic elastomer, which is prepared by a crosslinking reaction under twist deformation, is investigated. The twist deformation induces a layer tilt angle that depends on the handedness of twist. The layer tilt angle in the right‐handedly twisted elastomer, of which the handedness is consistent with that of the helix in the SmC* phase of the non‐crosslinked backbone polymer, is estimated to be up to 16° at room temperature, although that in the left‐handedly twisted elastomer is less than several degrees. The experiments provide evidence of chiral coupling between tilt and twist for helical mechanoclinic deformation in the chiral smectic system.
For polymer systems of two crystalline phases of one polymer component, each phase being consisted of polymer crystals of a finite size, we derive the crystalline‐crystalline phase transition relationship, i.e., generalized Gibbs‐Thomson equation. Its application combined with the crystalline‐liquid transition relationship (usual Gibbs‐Thomson equation) to the phase behavior of PT phase diagram of polyethylene (PE) is investigated, where the orthorhombic‐hexagonal phase transition of PE crystal under high pressure being involved. Comparison with experimental data leads to the estimates of the structural characteristics such as the ratios of (the end surface free energy of polymer crystal/crystal length) for the respective crystalline phases.
Colloidal quantum dots are well‐established probes for quantum optical experiments. However, they possess a limited stability toward their environment. Herein, the generation of hybrid particles composed of a high optical quality quantum dot centered in a polymer particle by means of a miniemulsion polymerization procedure is reported. This embedding strongly enhances emission intensity and photochemical stability of these single‐photon emitters. At the same time, their colloidal mobile nature is not compromised.
The free radical grafting of polyethylene with vinyl monomers by reactive extrusion was studied numerically. Numerical computation expressions of key variables, such as the concentrations of the initiator and polymer, grafting degree, average molecular weight and apparent viscosity, were deduced. The evolutions of the above variables were predicted by means of an uncoupled semi‐implicit iterative algorithm. The monomer conversion monotonically increases with decreasing throughput or increasing initial initiator concentration; with increasing barrel temperature, the monomer conversion first increases then decreases. The simulated results are nearly in good agreement with the experimental results.
Nanostructures with stimuli‐responsive properties are of great importance for the application of smart materials in nanotechnology. Unique hollow polypyrrole nanostructured arrays with a conical shape have been produced by a stepwise electropolymerization process. The polypyrrole conical nanocontainers exhibit a reversible switchable behavior between open and closed states, which is controlled by the movement of counter ions during electrically controlled reversible oxidation and reduction processes. The formation of conical nanocontainers is affected by the oleo‐wettability of the substrate. Conical nanocontainers can be formed on oleo‐phobic substrates in aqueous solution by using dopant‐stabilized pyrrole nanodroplets as the guiding template for the polymerization.
Poly(ethersulfone) membranes were surface modified in a one‐step procedure. For this purpose, the membranes were soaked with aqueous solutions of different low‐molecular weight molecules bearing diverse hydrophilic functionalities and subject to electron beam treatment. No catalysts, photoinitiators, organic solvents or other toxic reagents were used, and no additional synthetic or purification steps were required.
Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.
The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer. 相似文献
Summary: The recrystallization behavior of high density polyethylene (HDPE) single crystals with vacuum evaporated metal chromium or carbon on their surface has been investigated by transmission electron microscopy (TEM) and electron diffraction (ED) techniques. The results indicate that the particle‐coated HDPE single crystals can retain their single crystal structure after complete melting and subsequent recrystallization, with the heat‐treated temperature as high as 200 °C. This phenomenon is attributed to a surface fixing effect of vacuum evaporated Cr or carbon on the single crystals.
A bright‐field electron micrograph and the corresponding electron diffraction pattern of recrystallized Cr‐coated HDPE single crystals. 相似文献
Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.
Nylon‐6/poly(ethylene terephthalate) (PET) ultra‐multi‐island sea–island conjugated melt‐spun fibers are flow‐drawn at a draw ratio of 174 with heating by CO2 laser irradiation. Continuous PET nanofibers that have a diameter of 39 nm could be obtained from the flow‐drawn fiber with further drawing and removal of the sea component. In addition, the drawn fiber has a strength of 0.54 GPa. This result shows that a PET nanofiber having a strength almost equal to that of a conventional PET fiber can be obtained by the combination of conjugate‐melt‐spinning and laser‐heated flow‐drawing.
The morphology of a H‐shaped block copolymer (poly(ethylene glycol) backbone and polystyrene branches (PS)2PEG(PS)2) in a thin film has been investigated. A peculiar square lamella that has a phase‐separated microdomain at its surface is obtained after spin coating. The experimental temperature plays a critical role in the lamellar formation. The copolymer first self‐assembles into square lamellar micelles with an incomplete crystalline core due to the crystallizability of PEG. In the subsequent process of solvent evaporation, phase separation between PS and non‐crystalline PEG attached at the chain‐folded PEG surface takes place, which results in phase‐separated microdomains being formed at the lamellar surface.
Cross‐linked lyotropic liquid crystal (LLC) assemblies represent a new class of polymer materials for membrane applications. These materials are formed by the phase‐segregation and self‐assembly of polymerizable amphiphiles in water into condensed ordered ensembles that can be cross‐linked in situ with retention of microstructure. The resulting LLC polymer networks have ordered, nanometer‐scale aqueous and cross‐linked organic domains, which can be used to affect gas solubility and diffusivity through the polymer to help separate molecules via the solution–diffusion mechanism. The open aqueous domains can also be used for pore transport and size exclusion with resolution on the molecular size level. The use and application potential of cross‐linked LLC assemblies as gas separation membranes, selective vapor barrier materials, and water nanofiltration and desalination membranes are presented.
Summary: We describe a simple photochemical process that allows the covalent attachment of a variety of different polymers at room temperature onto aluminium surfaces. The system is based on a photoreactive benzophenone derivative that is bound to aluminium surfaces by a phosphonic acid anchor. The synthesis of the phosphonic acid is described and the immobilization of this compound is studied by X‐ray photoelectron and FT‐IR spectroscopy. After deposition of the polymeric coating, UV light illumination at 365 nm, and solvent extraction of the substrate, polymer monolayers are obtained that are chemically bound to the surface.
Covalent attachment of polymers to the aluminium‐bound benzophenone phosphonic acid. 相似文献
We assess the elastic properties of PS‐b‐PAA vesicle membranes under different pH values by AFM force measurements. We find that based on the shell deformation theory, the values of the estimated apparent Young's modulus of the vesicle membranes decrease as the pH of the solution increases. The onset of the decrease of E coincides with the surface pKa determined from ζ‐potential measurements. This decrease of E at higher pH is attributed to electrostatic repulsion between the deprotonated PAA chains resulting in the thinning of the vesicle membrane.
Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g−1 and 1.5 mg · g−1. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.
