Determination of Propagation Rate Coefficient of Acrylates by Pulsed‐Laser Polymerization in the Presence of Intramolecular Chain Transfer to Polymer

Unusual difficulties are faced in the determination of propagation rate coefficients (k_p) of alkyl acrylates by pulsed‐laser polymerization (PLP). When the backbiting is the predominant chain transfer event, the apparent k_p of acrylates determined in PLP experiments for different frequencies should range between k_p (propagation rate coefficient of the secondary radicals) at high frequency and k at low frequency. The k value could be expressed from kinetic parameters: , where k_fp is the backbiting rate coefficient, k_p2 is the propagation rate coefficient of mid‐chain radicals, and [M] is the monomer concentration.

Apparent propagation rate coefficients determined for different frequencies by simulating the PLP of n‐butyl acrylate at 20 °C. Horizontal full lines show the values of k_p and k.     

A Cationic Water‐Soluble Poly(p‐phenylenevinylene) Derivative: Highly Sensitive Biosensor for Iron‐Sulfur Protein Detection

Summary: A new water‐soluble cationic ammonium‐functionalized poly(p‐phenylenevinylene) (PPV‐NEtMe) was successfully synthesized and exhibited high sensitivity (K_sv = 6.9 × 10⁷ M ⁻¹) on rubredoxin, a type of anionic iron‐sulfur (Fe‐S) proteins. Further investigation showed that the biosensitivity of the cationic conjugated polymer is strongly dependent on the nature of the buffer solution and the concentration of the conjugated polymer used in the analyses.

The schematic diagram of anionic rubredoxin detected by PPV‐NEtMe.     

Binding of uranyl ion by poly(ethylenimine) containing a salicylate derivative

Three molecules of 5-(bromoacetyl)salicylate ( 1 ) complexed to uranyl UO ion were crosslinked with branchy poly(ethylenimine) (PEI) in DMSO by alkylation of amino groups of PEI with 1, leading to the formation of UO₂(Sal) PEI. Upon demetalation of UO₂(Sal) PEI with HCl, apo(Sal) PEI was obtained. Based on the pH dependence of log K_f for UO₂(Sal) PEI, it was concluded that each uranyl binding site in UO₂(Sal) PEI or apo(Sal) PEI contains three salicylate moieties. In terms of the equilibrium constant for formation of the uranyl complex, apo(Sal) PEI was found to be comparable to or better than the previously reported effective uranophiles. In terms of the rates for the formation of the uranyl complex, however, apo(Sal) PEI was far superior to those other uranophiles. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2935–2942, 1997     

Zur Kristallstruktur von OMF (M = Sb,Ru, Pt,Au)

On the Crystal Structure of O MF (M = Sb, Ru, Pt, Au) OMF (M = Sb, Ru, Pt, Au) were obtained again, but for the first time investigated by X-ray methods. Colourless OSbF and the rubyred compounds ORuF and OPtF crystallize isostructural in space group Ia3 -T_h⁷ (Nr. 206) with a = 1016(1) pm (Sb), a = 1002.6(9) pm (Ru) and a = 1003.6(9) pm (Pt), Z = 8. Yellow OAuF crystallizes trigonal-rhombohedric in space group R3 -D₃₂⁶ (Nr. 148) with a = 775.9(3) pm, c = 711.7(4) pm, Z = 3.     

19F-NMR-spektroskopischer Nachweis und statistische Untersuchung zur Bildung der gemischten Clusteranionen [(Mo6ICl)F]2−, n = 0–7, und Darstellung von (TBA)2[(Mo6I)F]

¹⁹F NMR Spectroscopic Evidence and Calculation of the Statistical Formation of Mixed Cluster Anions [(Mo₆I Cl )F ]^2?, n = 0–7, and Preparation of (TBA)₂[(Mo₆I )F ] The octa-μ₃-iodo-hexafluoro-hexamolybdate(2?)ion [(Mo₆I)F]^2? is prepared for the first time. The system of the 21 innersphere mixed clusters (Mo₆ICl)⁴⁺, n = 0–7 is formed by exchange of innersphere bound Clⁱ against outersphere bound I^a on tempering solid [(Mo₆Cl)I] at 400°C. Prolonged tempering leads to increasing average n values of the mixture, which is converted into the tetrabutylammonium salt (TBA)₂[(Mo₆ICl)F]. Using increments of chemical shifts and integral peak intensities the 54 ¹⁹F-nmr signals of the 21 species (compound n = 8 is absent) are assigned and confirmed by the 2 D-¹⁹F/¹⁹F-COSY spectrum. From the measured intensities the distribution of the different compounds is determined and proves significant deviation from statistical occupation, revealing the preference of isomers with iodine atoms occupying edges of the innersphere cube and discrimination of those sharing diagonals of the faces. Moreover all compounds with n = 3 and 4 are present overaverage in comparison to the others.     

Rigid backbone polymers. XI. Solution phase-viscosity relationship

Using combined results of isothermal viscosity measurements and cross-polarized light microscopy on four polyisocyanate/solvent systems, the following were demonstrated: (a) an anisotropic phase appears, associated with a shoulder in the viscosity curve, at a concentration v lower than the peak viscosity at v; (b) the inversion from anisotropic inclusions in an isotropic matrix to isotropic inclusions in an anisotropic matrix, occurs at concentrations v > v and (c) the attainment of a single phase, microscopically anisotropic, occurs at v > v; where the viscosity is decreasing but has not yet reached its minimum. When the experiments were repeated with changes in temperature, the following were observed: (a) within each single phase the viscosity drops with increased temperature; (b) in the biphasic range, the total viscosity η⁰ remains about constant in the concentration range ≤ and increases with temperature in the range v > v; (c) in the interval v > v of the biphasic range, at constant temperature an increase in concentration decreases η⁰, and at constant concentration, a decrease in temperature lowers η⁰. Qualitative explanations of the observations are proposed.     

Propagation Rate Coefficient and Fraction of Mid‐Chain Radicals for Acrylic Acid Polymerization in Aqueous Solution

In acrylate polymerizations both SPRs and tertiary MCRs occur. Via pulsed laser polymerization, using a wide range of LPRRs, in conjunction with aqueous‐phase size‐exclusion chromatography, the polymerization of 1.35 mol · L⁻¹ acrylic acid in aqueous solution has been investigated at 6 °C. The sigmoidal decrease in the apparent propagation rate coefficient, k, towards lower LPRRs is in line with recent predictions. At the highest LPRRs, k approaches the rate coefficient of SPR propagation, k, whereas the limiting value of k at low LPRRs approaches the effective propagation rate coefficient, k, which allows for an estimate of the fraction of MCRs under polymerization conditions, x^MCR.

     

The proton affinity and the structure of protonated species of methylsilane

An ab initio LCAO-MO-SCF calculation was made on the proton affinity (PA ) of methylsilane (CH₃SiH₃) by using STO -3G, MIDI -1, and MIDI -1* basis sets. Three types of protonated methylsilane are taken into account, and their geometrical parameters are optimized. The calculated PA of CH₃SiH₃ is 160.5 kcal/mol, which exceeds that of SiH₄ by 11.5 kcal/mol. The protonated species (I) which refers to Si—C bond protonation is shown to be most favorable, and to be a weak σ-complex between CH₄ and SiH. Other two species are also σ-complexes between H₂ molecule and SiH₃CH or CH₃SiH, and similar to CH, SiH, GeH, and C₂H.     

Photoelectrochemistry with Colloidal Semiconductors; Laser Studies of Halide Oxidation in Colloidal Dispersions of TiO2 and α-Fe2O3

Aqueous sols of TiO₂ (anatase, particle radius 25 Å) were excited with (347.1 nm)-laser light and the reaction of valence-band holes with halide ions (X = I^?, Br^?, Cl^?) was investigated. Hole transfer takes place within the duration of the (10 ns)-laser pulse and results in the formation of anion radicals according to the sequence: The quantum yield of X increases in the order Cl < Br < I, attaining 0.8 for I at pH 1. It is affected by pH, halide concentration and the presence of a protective agent for the sol. RuO₂ deposited onto TiO₂ enhances markedly Cl and Br -formation, but has no effect on the yield of I. Laser-photolysis investigation of halide oxidation were also carried out with colloidal Fe₂O₃ (particle radius 600 Å). For I_2?formation, the quantum yield exceeds 0.9 indicating almost quantitative hole scavenging by iodide.     

Novel Superlattices via Blending of Asymmetric Triblock Terpolymers with Diblock Copolymers

The formation of superlattices in blends of a series of asymmetric BSV triblock terpolymers and symmetric SV or VC diblock copolymers is investigated with S being polystyrene, B being poly(1,2‐butadiene), V being poly(2‐vinylpyridine), and C being poly(cyclohexyl methacrylate). All of these triblock terpolymers and diblock copolymers by themselves self‐assemble into lamellae. Apart from various core shell morphologies, in these blends some new unexpected superstructures were obtained.

A TEM micrograph of a 50/50 blend of B₃₀S₅₈V with S₄₅V.     

Hydration of superoxide studied by molecular dynamics simulation

Molecular dynamics was used to study the hydration of superoxide (O). The Helmholtz free energy of hydration of O was estimated by the thermodynamic integration method. The diffusion of O and the water structure around O were also studied. Two water models were used in the calculations and the results were compared to experiments.     

Li+?F− in aqueous solution

The energy hypersurface for the system Li(H₂O)–F(H₂O) is investigated using the polarization model. A possible mechanism for the production of HF in this solution droplet is observed.     

Polysila analogs of aromatic hydrocarbon ions: Structures and energies of Si3H3+, Si4H,and Si5H5−

Silicon analogs of aromatic monocyclic ions, (SiH) ( 4 ), (SiH) ( 5 ), and (SiH) ( 6 ) have been studied ab initio at MP 2(full)/6-31G *. The D_3h structure of Si₃H₃⁺ is the global minimum, whereas other two ions are nonplanar. The D_2d structure of (SiH) is less folded than the carbon analog and possesses a higher stabilization energy. Stabilization energies for the monocharged ions are diminished with respect to the corresponding carbons © 1993 John Wiley & Sons, Inc.     

Synthesis and Characterization of Novel Ethene‐graft‐Ethene/Propene Copolymers

The synthesis of ethene/propene macromers with a high amount of sterically unhindered vinyl groups is described. These macromers are incorporated as long‐chain branches into polyethylene (PE). The remaining low molecular fractions were removed by Soxhlet extraction. Up to 60 wt.‐% macromer was included, which leads to comb‐like molecular topographies that distinctly affect the rheological behavior. The thermal activation energy increased significantly and the zero shear‐rate viscosity enhancement factor η ₀ / η was also changed noticeably.

     

Charge stripping C

Measurements of the translational energy loss accompanying the charge-stripping reactions M⁺+N→M²⁺+N+e⁻ and M²⁺+N→M³⁺+N+e⁻ have been performed for C, C and C, C respectively. The energy nesessary to remove the second electron from Buckminsterfullerene was determined, Q=IE(C→C=12.25±0.5 eV.     

Nitroxide‐Mediated Controlled/Living Free Radical Copolymerization of Styrene and Divinylbenzene in Aqueous Miniemulsion

Summary: The nitroxide‐mediated controlled/living free radical copolymerization of styrene and divinylbenzene using a polystyrene‐TEMPO macroinitiator in aqueous miniemulsion and in bulk have been investigated. The crosslink densities were estimated based on the content of pendant vinyl groups as determined by ¹H NMR. Considerably lower crosslink densities were revealed in the miniemulsion than in the corresponding bulk system. The rate of polymerization in the miniemulsion increased with decreasing particle size, and was significantly higher than in bulk.

Crosslink density for the TEMPO‐mediated free radical copolymerization of S(1) and DVB(2) (f = 0.99, f = 0.01) at 125 °C in bulk (□) and in miniemulsions with d_n = 585 nm (○) and 53.3 nm (•).     

Convergence accelerator approach for the evaluation of some three‐electron integrals containing explicit rij factors

A simplified analysis is presented for the evaluation of the three‐electron one‐center integrals of the form ∫rrrrrred r ₁d r ₂d r ₃, for the cases i, j, k, ≥−2, l=−2, m≥−1, n≥−1. These integrals arise in the calculation of lower bounds for energy levels and certain relativistic corrections to the energy when Hylleraas‐type basis sets are employed. Convergence accelerator techniques are employed to obtain a reasonable number of digits of precision, without excessive CPU requirements. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 72: 93–99, 1999     

19F-NMR-spektroskopischer Nachweis und Berechnung der statistischen Bildung der gemischten Clusteranionen [(Mo6BrCl)F]2−, n = 0 – 8

¹⁹F NMR Spectroscopic Evidence and Calculation of the Statistical Formation of Mixed Cluster Anions [(Mo₆Br Cl )F ]^2?, n = 0 – 8 The complete system of the innersphere mixed clusters (Mo₆BrCl)⁴⁺ is formed by exchange of innersphere bound Clⁱ against outersphere bound Br^a on tempering the solid [(Mo₆Cl)Br] at 500°C for 16 h. After conversion with conc. HCl into (H₃O)₂[(Mo₆BrCl)Cl] and precipitation of the outer Cl^a with AgBF₄ in ethanol, treatment with tetrabutylammonium(TBA)fluoride yields (TBA)₂ [(Mo₆BrCl)F], a mixture of 22 different species. According to the sets of chemical equivalent fluorine atoms in total 55 ¹⁹F nmr signals are expected, which are really observed in the high resolution 1D-¹⁹F-nmr spectrum. Using increments of chemical shifts, peak intensities and multiplet structures as well as the 2D-¹⁹F/¹⁹F-COSY spectrum the complete and unambiguous assignment of all resonances is achieved. From the measured integral intensities the distribution of the different compounds is determined, revealing statistical formation of the geometrical isomers.     

Darstellung,Schwingungsspektren und Kristallstrukturen von [(Ph3P)2N]2[(W6Cl)I] · 2 Et2O · 2 CH2Cl2 und [(Ph3P)2N]2[(W6Cl)(NCS)] · 2 CH2Cl2

Synthesis, Crystal Structures, and Vibrational Spectra of [(Ph₃P)₂N]₂[(W₆Cl )I ] · 2 Et₂O · 2 CH₂Cl₂ and [(Ph₃P)₂N]₂[(W₆Cl )(NCS) ] · 2 CH₂Cl₂ By treatment of [(W₆Cl)I]^2– with (SCN)₂ in dichloromethane at –20 °C the hexaisothiocyanato cluster anion [(W₆Cl)(NCS)]^2– is formed. X‐ray structure determinations have been performed on single crystals of [(Ph₃P)₂N]₂[(W₆Cl)I] · 2 CH₂Cl₂ · 2 Et₂O ( 1 ) (triclinic, space group P1, a = 10.324(5), b = 14.908(3), c = 17.734(8) Å, α = 112.78(2)°, β = 99.13(3)°, γ = 92.02(3)°, Z = 1) and [(Ph₃P)₂N]₂[(W₆Cl)(NCS)] · 2 CH₂Cl₂ ( 2 ) (triclinic, space group P1, a = 11.115(2), b = 14.839(2), c = 17.036(3) Å, α = 104.46(1)°, β = 105.75(2)°, γ = 110.59(1)°, Z = 1). The thiocyanate ligands of 2 are bound exclusively via N atoms with W–N bond lengths of 2.091–2.107 Å, W–N–C angles of 173.1–176.9° and N–C–S angles of 178.1–179.3°. The vibrational spectra exhibit characteristic innerligand vibrations at 2067–2045 (ν_CN), 879–867 (ν_CS) and 490–482 (δ_NCS). Based on the molekular parameters of the X‐ray determination of 1 the vibrational spectra of the corresponding (n‐Bu₄N) salt of 1 are assigned by normal coordinate analysis. The valence force constants are f_d(WW) = 1.61, f_d(WI) = 1.23 and f_d(WCl) = 1.10 mdyn/Å.     

The role of d orbitals in tetrahedral hybrid orbitals of oxy-ions

The hybrid orbitals of tetrahedral oxy-ions containing some d character have been calculated by maximum overlap method. The d characters of hybrid orbitals increase in the order of SiO, PO, SO, ClO, and decrease in order of GeO, AsO, SeO, BrO. The bond strengths are also obtained for these ions. The hybrid Orbital of VO, CrO, and MnO are of the type d³s as the result of calculation.