Summary: Poly(propylene oxide)‐amidoacids were used to intercalate montmorillonite clay to afford organoclays with an X‐ray basal spacing as wide as 81 Å. Differing from the ionic exchange between quaternary ammonium salts and the metal ions in clays, the intercalation mechanism involves a beta‐amidoacid chelation with sodium ions in the silicate interlayer confinement. With the end groups tethered on the silicate surface, the hydrophobic poly(propylene oxide)‐backbones self‐aggregate and consequently widen the interlayer space between neighboring silicate plates.
Postulated structure of the chelation of sodium ions by the poly(propylene oxide)‐amido acid. 相似文献
We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.
Using a layer‐multiplying coextrusion process to fabricate films with thousands of alternating polymer nanolayers, we report here a new crystalline morphology in confined polymer nanolayers and an abrupt transition in the crystallization habit. At higher temperatures, poly(ethylene oxide) crystallizes as large, in‐plane lamellae. A 5 °C change in the crystallization temperature produces an on‐edge lamellar orientation. The results point to a transition from heterogeneous nucleation to substrate‐assisted nucleation. This may be a general phenomenon that accounts for previously unexplained differences in the preferred chain alignment of confined polymer crystals.
Summary: Optical absorption measurements are used for the first time to investigate the uptake of pure organic solvents or solutions by latex particles. Sorption into glassy polymer particles is a two‐stage process with distinctly different characteristic times, which reflects that an initial softening of the outer particle layer facilitates further uptake. The sorption of solutions containing highly water‐insoluble compounds allows the preparation of composite nanoparticles, which are hardly accessible by other routes.
Photograph of the neat 100 nm latex (right) particles and the particles after dying by sorption with the hydrophobic pigment Sudan IV (left). 相似文献
Polycarbonate (PC)/vapor‐grown carbon fiber (VGCF™) composite was prepared through melt compounding. It was unexpectedly found from differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD) that the crystallization of PC was substantially accelerated in the presence of the ordered graphite surface of VGCF™. To make an aligned structure of PC crystallization together with the orientation of VGCF™, a magnetic field of 2.4 T was applied to the composite under several temperature profiles. The WAXD pattern revealed that not only dispersed VGCF™ but also matrix PC crystallization was magnetically aligned through the optimization of processes. The evidence for PC crystallization by VGCF™ with and without magnetic force is described.
Optical micrograph (a) and WAXD pattern (b) of PC/VGCF™ (95:5 wt. ratio) composite which was treated under a magnetic field (vertical direction) of 2.4 T under an optimized heating profile. 相似文献
Two emerging material classes are combined in this work, namely polymeric carbon nitrides and microporous polymer networks. The former, polymeric carbon nitrides, are composed of amine‐bridged heptazine moieties and showed interesting performance as a metal‐free photocatalyst. These materials have, however, to be prepared at high temperatures, making control of their chemical structure difficult. The latter, microporous polymer networks have received increasing interest due to their high surface area, giving rise to interesting applications in gas storage or catalysis. Here, the central building block of carbon nitrides, a functionalized heptazine as monomer, and tecton are used to create microporous polymer networks. The resulting heptazine‐based microporous polymers show high porosity, while their chemical structure resembles the ones of carbon nitrides. The polymers show activity for the photocatalytic production of hydrogen from water, even under visible light illumination.
Summary: Amphiphilic graft polyphosphazenes (EtTrp/PNIPAm‐PPP) with different mole ratios of hydrophobic groups to hydrophilic segments were synthesized by ring‐opening polymerization and subsequent substitution reactions. The self‐assembly behavior of these graft copolymers was studied in detail by TEM, SEM, CLSM, and AFM. Depending on the copolymer composition and common organic solvent employed in dialysis process, supramolecular aggregates ranging from network, nanospheres, high‐genus particles to macrophage‐like aggregates were produced with graft copolymers.
Summary: Under UV irradiation plus a photomask, a hydrophilic/hydrophobic hybrid polymer surface is created by sandwiching an ammonium persulfate solution between two polymer films. It is demonstrated that an effective conductive PANI micropattern can be fabricated on such a wettability patterned surface. For PET, a stable negative micropattern could be formed directly by the selective deposition of PANI onto the hydrophobic region. Alternatively, for PP or PI, direct deposition of PANI is non‐selective, however, the PANI layer remains preferentially on the hydrophilic region by peeling off the PANI layer on the hydrophobic region to form a positive micropattern.
Schematic illustration of the procedure used for the formation of a conducting polymer (PANI) micropattern on a wettability patterned polymer substrate. 相似文献
Equilibrium and non‐equilibrium molecular dynamics simulations of flexible polymer chains absorbed on heterogeneous surfaces are presented. The surfaces are flat but energetically disordered, consisting of a random mixture of weakly and more strongly absorbing sites (94 and 6%, respectively). For comparison, the two corresponding homogeneous surfaces are also simulated. This apparently weak energetic disorder can produce significant changes of the chain statistics, equilibrium dynamics, and non‐equilibrium response to a horizontal pulling force. On the disordered surfaces, the polymer–surface effective friction coefficient becomes strongly force‐dependent, as the dominant mode of motion changes from localized stick–slip events to smooth and continuous sliding. This is strongly reminiscent of the Schallamach model of rubber friction and the Maier–Göritz picture of the Payne effect in filled elastomers.
A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.
The united atoms (UA) and dummy hydrogen atom (DHA) approaches for molecular dynamics simulations of the interface between oxidized atactic polystyrene (aPS) thin films and water are compared. For both oxidized and non‐oxidized aPS films the polymer density profile decays steepest when using the UA model. The surface roughness of the aPS film and the ordering of the phenyl rings near the surface decrease upon changing from vacuum to water for the UA, but not for the DHA model. This also supports the fact that the non‐oxidized aPS films modeled in DHA representation become less hydrophobic. The water structure close to the interface also suggests that the aPS films modeled using UA are more hydrophobic compared to the aPS films modeled with DHA in the phenyl rings.
The stabilisation of miniemulsions using an in situ generated surfactant is presented. This surfactant, prepared from of a water‐soluble base and an oil‐soluble long chain acid was successfully used to create stable miniemulsions with up to 60 vol.‐% organic phase. It is shown that the creation of a surface active species at the oil–water interface allowed stable miniemulsions to be generated more rapidly than when using conventional surfactant. In addition, polymerised miniemulsions exhibited less secondary nucleation when in situ surfactants were used.
A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.
Summary: Linear polymeric core, polyethylenimine (PEI), is successfully dendronized divergently using different‐generation polyamidoamine (PAMAM)‐type dendrons. The formed dendronized polymers are further end‐capped using long alkyl acrylate, hexyl acrylate, to give macromolecular amphiphiles, which perform as unimolecular nanocontainers, capable of encapsulating water‐soluble dye in their interiors. The encapsulation properties are found to be generation‐dependent, in which, at higher generations of nanocontainers, the cavity becomes more localized, due to dense packing of the dendrons at their termini.
Dendronization of a linear polymeric core followed by capping with hydrophobic arms. 相似文献
A set of poly(propylene) composites containing different amounts of copper nanoparticles (CNP) were prepared by the melt mixed method and their antimicrobial behavior was quantitatively studied. The time needed to reduce the bacteria to 50% dropped to half with only 1 v/v % of CNP, compared to the polymer without CNP. After 4 h, this composite killed more than 99.9% of the bacteria. The biocide kinetics can be controlled by the nanofiller content; composites with CNP concentrations higher than 10 v/v % eliminated 99% of the bacteria in less than 2 h. X‐ray photoelectron spectroscopy did not detect CNP at the surface, therefore the biocide behavior was attributed to copper in the bulk of the composite.
Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.
Annealing of PDADMAC/PSS multilayer microcapsules assembled on PSS‐doped CaCO3 particles at 80 °C for 30 min reduces their size dramatically from 6.9 ± 0.3 to 3.1 ± 0.5 µm. Methylene blue molecules are encapsulated by spontaneous deposition and post‐annealing with a concentration of 22 mg · mL?1, which is 1000 times higher than the feeding value. The unreleased MB molecules are retained stably for a long time, which are then protected by the capsules against reductive enzymes and keep their photodynamic activity. The viability of HeLa cells incubated with the MB‐loaded capsules decreases sharply from ≈75 (dark cytotoxicity) to ≈20% after irradiation with a laser at 671 nm and 60 J · cm?2 for 75 s.
Novel temperature and pH dual‐responsive hydrogels were constructed by inclusion of poly(PEGMA)‐co‐poly(DMA) with α‐cyclodextrin in aqueous solution. The temperature‐ or pH‐induced sol/gel transition in the hydrogels was completely reversible. Studies on structure/property relationships show that chain uniformity, graft density and copolymer concentration affect the hydrogel behavior. A dual‐responsive mechanism is proposed. The in vitro release of a model drug from this hydrogel was studied. It was found that the release kinetics were greatly accelerated at higher temperature and at acidic pH conditions, indicating potential applications in controlled drug delivery.
