Microwave Accelerated Polymerization of 2‐Phenyl‐2‐oxazoline

Summary: We studied the cationic ring‐opening polymerization of 2‐phenyl‐2‐oxazoline under microwave irradiation. A comparison with thermal heating shows a great enhancement in the reaction rates while the living character of the polymerization is conserved. The polymerizations were performed at the temperature of boiling butyronitrile (123 °C). The polymerization of 2‐phenyl‐2‐oxazoline under microwave conditions, described herein for the first time, is shown to be a rapid and environmentally friendly alternative to the classical methods.

Schematic of the activation of the reactive site by microwave irradiation.     

Solvent-Free Synthesis of Nitrilotriacetamide and Diketopiperazines from Nitrilotriacetic Acid under Microwave Irradiation and Their Antimicrobial Activity

Efficient synthesis of dioxopiperazines‐diketopiperzines (DKPs)‐ and amide from nitrilotriacetic acid (NTA) using microwave irradiation and classical heating were described. All compounds were characterized using ¹H NMR, ¹³C NMR and elemental analysis. Antimicrobial effects of these compounds are also investigated. All tested compounds showed moderate antimicrobial activity.     

Effect of Microwave Activation on Polymerization Rate and Molecular Weight Development in Emulsion Polymerization of Methyl Methacrylate

Polymerization rate and molecular weight development experimental results for the emulsion polymerization of methyl methacrylate (MMA), in the presence of potassium persulphate (PPS) as initiator, and activated with a 50 W microwave source, are reported. The polymerization kinetics of the microwave activation experiment (MA) was compared against a traditional conductive heating (CH) polymerization reaction. The number average molecular weights, M_n, of the polymer samples obtained with microwave activation were significantly higher than those obtained from conductive heating. These high values of M_n were obtained from the beginning of the polymerization reaction. Polydispersity index (PDI) values in the range of 1.18 to 1.83 were obtained in the microwave irradiated samples. These values are lower than those produced by conventional emulsion polymerization of styrene and other vinyl monomers, and resemble the PDI values obtained in controlled‐radical polymerization processes. Polymer particles of submicron size (60 to 100 nm) were obtained.     

苯并噻唑螺萘并吡喃类化合物的微波合成与性质

苯并噻唑螺萘并吡喃类化合物的微波合成与性质;微波辐射法;溶剂效应;荧光效应     

苯并噻唑螺萘并噁嗪类化合物的微波合成与性质

以苯并噻唑衍生物、1-亚硝基-2-萘酚为原料,三乙胺为催化剂,无水乙醇为溶剂,采用微波辐射法合成了苯并噻唑螺萘并噁嗪光致变色化合物.通过元素分析,IR,MS,1H NMR对结构进行了表征,并用紫外分光仪研究了溶剂效应和荧光分光光度计研究了荧光效应,结果表明该类化合物具有较好的荧光性能,其开环体的λmax与溶剂的极性常数呈较好的线形相关性.     

Atom Transfer Radical Polymerization of N,N‐Dimethylacrylamide

Summary: The living polymerization of N,N‐dimethylacrylamide was achieved by atom transfer radical polymerization catalyzed by copper chloride complexed with a new ligand, N,N′‐bis(pyridin‐2‐ylmethyl 3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED). With methyl 2‐chloropropionate as the initiator, the polymerization reached high conversions (> 90%) at 80 °C and 100 °C, producing polymers with very close to theoretical values and low polydispersity. The ligand, temperature, and copper halide strongly affected the activity and control of the polymerization.

PDMA molecular weight and polydispersity dependence on the DMA conversion in the DMA bulk polymerizations at different temperatures: DMA/CuCl/MCP/BPED = 100/1/1/1, 100 °C (♦, ⋄); 80 °C (▴, ▵); 60 °C (▪, □); and DMA/CuCl/MCP/BPED = 100/1/1/2, 80 °C (•, ○).     

微波辐射下开链的双季酮酸衍生物的非预期和有效合成

在微波辐射下，以乙二醇为溶剂，非预期地实现了新的开链双季酮酸衍生物的简易合成。这个方法具有反应时间短、产率高、操作简便以及环境友好等显著优点。     

无溶剂条件下利用微波促进下的多组分反应对2,6-二芳基-4-苯乙烯基吡啶化合物进行非预期的绿色简易合成

在无溶剂条件下,通过微波促进下的3-芳基丙烯醛肟、1-芳基乙酮及醋酸铵的多组分反应,非预期地实现了2,6-二芳基-4-苯乙烯基吡啶化合物的绿色简易合成。该方法具有环境友好、反应时间短、产率高、成本低、操作简便以及适用范围广等优点。     

微波辐射下8-溴腺苷及其衍生物的绿色合成

以Br2为溴化试剂,水为溶剂,微波辐射5 min,合成了6种8-溴腺苷衍生物,收率76%~85%,其结构经1HNMR,HR-MS和元素分析表征。     

Atom Transfer Radical Polymerization of N‐Isopropylacrylamide

Summary: Controlled polymerization of N‐isopropylacrylamide (NIPAAM) was achieved by atom transfer radical polymerization (ATRP) using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/tris(2‐dimethylaminoethyl)amine (Me₆TREN) as a catalytic system. The polymerization was carried out in DMF:water 50:50 (v/v) mixed solvent at 20 °C. The first order kinetic plot was linear up to 92% conversion. Controlled molecular weights up to 2.2 × 10⁴ and low polydispersities (1.19) were obtained. The living character of the polymerization was also demonstrated by self‐blocking experiments. Block copolymers with N,N‐dimethylacrylamide (DMAAM) and 3‐sulfopropyl methacrylate (SPMA) were successfully prepared.

Molecular weights and polydispersities of polyNIPAAM versus NIPAAM conversion for two different degrees of polymerization.     

PMMA/Zinc Oxide Nanocomposites Prepared by In‐Situ Bulk Polymerization

Summary: Dispersing surface‐modified zinc oxide nanoparticles (ZnO) in methyl methacrylate (MMA) improves the free radical bulk polymerization process as well as the thermal stability of the formed polymer. Hydroxy groups available on the ZnO surface may induce a degenerative transfer. This suppresses the gel effect, which leads to a better control of the heat evolution during the late stages of polymerization. The formation of chains having vinylidene end groups and head‐to‐head links is suppressed, which shifts the onset of thermal decomposition to the regime where decomposition occurs by random chain scission.

Thermal degradation profiles of PMMA and its composite with ZnO at 11 wt.‐%.     

Microwave‐Assisted Polymer Synthesis: State‐of‐the‐Art and Future Perspectives

Summary: Monomodal microwaves have overcome the safety uncertainties associated with the precedent domestic microwave ovens. After fast acceptance in inorganic and organic syntheses, polymer chemists have also recently discovered this new kind of microwave reactor. An almost exponential increase of the number of publications in this field reflects the steadily growing interest in the use of microwave irradiation for polymerizations. This review introduces the microwave systems and their applications in polymer syntheses, covering step‐growth and ring‐opening, as well as radical polymerization processes, in order to summarize the hitherto realized polymerizations. Special attention is paid to the differences between microwave‐assisted and conventional heating as well as the “microwave effects”.

Results of search on number of publications on microwave‐assisted polymerizations, sorted by year.     

Ring‐Opening Metathesis Polymerization Based Post‐Synthesis Functionalization of Electron Beam Curing Derived Monolithic Media

Monolithic materials were prepared via electron‐beam curing from ethyl methacrylate, trimethylolpropane triacrylate, and norborn‐5‐ene‐2‐ylmethyl acrylate. Reaction of the norborn‐2‐ene groups with either RuCl₂(PCy₃)₂(CHPh) ( 1 ) or RuCl₂(PCy₃)(1,3‐dimesityl‐4,5‐dihydroimidazol‐2‐inylidene)(CHPh) ( 2 ) resulted in the surface attachment of the initiators. The extent of initiator immobilization was found to be substantially higher for 1 than for 2 . Reaction of the surface immobilized initiators with various monomers resulted in the desired surface modification of EB‐derived monoliths. The amounts of grafted monomer were determined by elemental analysis and ICP‐OES.

     

Green Polymer Chemistry: Microwave‐Assisted Single‐Step Synthesis of Various (Meth)acrylamides and Poly(meth)acrylamides Directly from (Meth)acrylic Acid and Amines

Summary: Various (meth)acrylamides were synthesized in good yields directly from (meth)acrylic acid and an amine using microwave irradiation in a solvent‐free environment. Under the applied conditions the (meth)acrylic function is preserved. Furthermore, the addition of an initiator like 2,2′‐azoisobutyronitrile (AIBN) to the starting mixture leads directly to poly(meth)acrylamides in a single step.

General reaction scheme for the formation of poly(meth)acrylamides from the microwave‐assisted reaction of (meth)acrylic acid and various amines.     

Living anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide: Synthesis of well‐defined poly(N‐isopropylacrylamide) having various stereoregularity

Anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide ( 1 ) was carried out with 1,1‐diphenyl‐3‐methylpentyllithium and diphenylmethyllithium, ‐potassium, and ‐cesium in THF at ?78 °C for 2 h in the presence of Et₂Zn. The poly( 1 )s were quantitatively obtained and possessed the predicted molecular weights based on the feed molar ratios between monomer to initiators and narrow molecular weight distributions (M_w/M_n = 1.1). The living character of propagating carbanion of poly( 1 ) either at 0 or ?78 °C was confirmed by the quantitative efficiency of the sequential block copolymerization using N,N‐diethylacrylamide as a second monomer. The methoxymethyl group of the resulting poly( 1 ) was completely removed to give a well‐defined poly(N‐isopropylacrylamide), poly(NIPAM), via the acidic hydrolysis. The racemo diad contents in the poly(NIPAM)s could be widely changed from 15 to 83% by choosing the initiator systems for 1 . The poly(NIPAM)s obtained with Li⁺/Et₂Zn initiator system possessed syndiotactic‐rich configurations (r = 75–83%), while either atactic (r = 50%) or isotactic poly(NIPAM) (r = 15–22%) was generated with K⁺/Et₂Zn or Li⁺/LiCl initiator system, respectively. Atactic and syndiotactic poly(NIPAM)s (42 < r < 83%) were water‐soluble, whereas isotactic‐rich one (r < 31%) was insoluble in water. The cloud points of the aqueous solution of poly(NIPAM)s increased from 32 to 37 °C with the r‐contents. These indicated the significant effect of stereoregularity of the poly(NIPAM) on the water‐solubility and the cloud point in water © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4832–4845, 2006     

Monomode Microwave‐Assisted Atom Transfer Radical Polymerization

Summary: The first monomode microwave‐assisted atom transfer radical polymerization (ATRP) is reported. The ATRP of methyl methacrylate was successfully performed with microwave heating, which was well controlled and provided almost the same results as experiments with conventional heating, demonstrating the absence of any “microwave effect” in ATRP (in contrast to several literature reports). Furthermore, we found that the main advantage of the microwave‐assisted reactions over conventional reactions, i.e., a significant increase of reaction rates, only had its limited application in ATRP, even in very slow ATRP systems with high targeted molecular weights.

Comparison of the kinetic plots of the ATRP of MMA ([MMA]₀/[EBIB]₀/[CuCl]₀/[NHPMI]₀ = 200:1:1:3, MMA/DMF = 1:1 v/v) carried out at 90 °C in DMF with microwave (▴) and conventional heating (•), respectively.     

微波辐射下吡啶[2,3-d]嘧啶衍生物的高效合成

本文以等摩尔的芳醛,巴比妥酸（或1,3-二甲基巴比妥酸）,5-氨基-2-甲基苯[d]噻唑为原料,以醋酸和乙二醇为溶剂,微波辐射下多组分一锅法合成了一系列新的吡啶[2,3-d]嘧啶衍生物。这种方法具有产率高,操作简便,反应时间短等优点。     

A Rapid Eco‐Friendly Synthesis of Poly(butylene succinate) by a Direct Polyesterification under Microwave Irradiation

Summary: A rapid and eco‐friendly synthesis of poly(butylene succinate) (PBS) using microwaves was developed in the presence of 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane as catalyst. To determine the optimum conditions, the effect of catalyst concentration, bulk vs. solution polymerization, reaction time, temperature, and stoichiometry of the monomers were studied. Based on the optimum conditions, PBS with a weight‐average molecular weight of 2.35 × 10⁴ was obtained in a short time of 20 min.

Synthesis of poly(butylene succinate) under microwave irradiation.     

Polymerization of neat 2‐ethylhexyl acrylate induced by a pulsed electron beam

The bulk polymerization of 2‐ethylhexyl acrylate (2‐EHA), induced by a pulsed electron beam, was investigated with pulse radiolysis, gravimetry, and Fourier transform infrared spectroscopy. The roles of the dose rate, pulse frequency, and added acrylic acid (AA) in the polymerization of 2‐EHA were examined at ambient temperature. In the range of 12.6–71.2 Gy/pulse, the polymerization of 2‐EHA was dose‐rate‐dependent: at the same total dose, a lower dose rate yielded a higher conversion. Also, a lower pulse rate gave a higher conversion at the same total dose. The addition of up to 10 wt % AA showed no increase in the conversion of 2‐EHA at a low conversion (8 kGy), but at a higher conversion (16 kGy), a 20 wt % increase in the conversion of 2‐EHA was observed. The estimated values (1.6 ± 0.3) × 10^?3 (dm³ s)^3/2 mol^?1 s^?1/2 for k_p(G/2k_t)^1/2 and 2.6 ± 0.8 dm³ s J^?1 for 2k_tG (where k_p is the rate constant of propagation, k_t is the rate constant of bimolecular termination, and G is the yield of free radicals) were obtained at relatively low conversions. The reaction rate constant of the addition of 2‐EHA^· free radicals to the monomer was measured by pulse radiolysis and found to be 2.8 × 10² mol^?1 dm³ s^?1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 196–203, 2003