Summary: A composite film composed of porous polyurethane (PU) and polystyrene (PS) microspheres with both superhydrophobicity and superoleophilicity has been prepared. In this film, the dual‐scale structure enhances both the hydrophobicity and oleophilicity of the surface material. The composite film with such an ‘intelligent’ wettability property can be utilized to separate oil and water systems efficiently.
The composite film can be used to separate diesel oil and water. 相似文献
A new route consisting of simultaneous centrifugal spinning and solution blowing to form polymer nanofibers is reported. The fiber diameter (60–1000 nm) is shown to be a function of polymer concentration, rotational speed, and working pressure of the processing system. The fiber length is dependent on the rotational speed. The process can deliver 6 kg of fiber per hour and therefore offers mass production capabilities compared with other established polymer nanofiber generation methods such as electrospinning, centrifugal spinning, and blowing.
Self‐assembled hollow nanosphere composites of polyaniline and Au nanoparticles (PANI‐p‐TSA/Au) were chemically synthesized from solutions containing p‐toluenesulfonic acid (p‐TSA) with the addition of gold chloride trihydrate as the oxidant. The composite materials were characterized by SEM, TEM, and a range of spectroscopic methods. Spectroscopic characterizations confirmed that the polymeric product is a form of doped PANI, while electron diffraction and X‐ray diffraction showed that elemental Au was present in the PANI‐p‐TSA/Au nanocomposites. The room temperature electrical conductivity of the PANI‐p‐TSA/Au nanocomposites was two orders of magnitude greater than a PANI‐p‐TSA obtained in the presence of ammonium persulfate as the oxidant under the same conditions.
We report a simple procedure to prepare a novel Au‐micelle composite with a core‐shell‐corona structure. This composite is prepared by reduction of tetrachloroauric acid (HAuCl4 · 3H2O) in dilute aqueous solution containing polystyrene‐block‐poly(4‐vinylpyridine) micelles and poly(ethylene oxide)‐block‐poly(4‐vinylpyridine) copolymers. The micelles with a polystyrene core and a poly(4‐vinylpyridine) shell are transformed into Au‐micelle composites with a polystyrene core, a swollen hybrid Au/poly(4‐vinylpyridine) inner shell, and a poly(ethylene oxide) corona by direct physisorption of gold particles with poly(4‐vinylpyridine) chains.
Summary: The miscibility of a thermoplastic modifier with the precursors of an epoxy/diamine thermoset without chemical reaction was studied thermodynamically. The experimental cloud point curve showed a UCST behavior. A model based on the Flory‐Huggins lattice theory and on the Koningsveld approach was used for the thermodynamic analysis, in which the polydispersity of components was taken into account and the interaction parameter was considered depending on the temperature and composition. A phase diagram for the unreacted system was obtained. Calculations of species distributions in both separated phases were realized for different compositions of the modifier. Finally, the miscibility of our system was compared with that of the same system without diamine, obtaining a greater miscibility in the system with diamine.
Phase diagram for the system formed by the precursors of an epoxy thermoset without chemical reaction modified with different amounts of polystyrene. 相似文献
For polymer synthesis upon visible light, actual photoinitiator operates in a restricted part of the spectrum. As a consequence, several photoinitiators are necessary to harvest all of the emitted visible photons. Herein, 2,7‐di‐tert‐butyldimethyldihydropyrene is used for the first time as a multicolor photoinitiator for the cationic polymerization of epoxides. Upon addition of diphenyliodonium hexafluorophosphate and optionally N‐vinylcarbazole, the originality of this approach is to allow efficient monomer conversions under various excitation light sources in the 360–650 nm wavelength range: halogen lamps, and light‐emitting and laser diodes. The synthesis of an interpenetrated polymer network from an epoxide/acrylate blend using a red light at 635 nm is also feasible. The formed polymer material exhibits a photochromic character.
Three‐dimensionally ordered macroporous (3DOM) syndiotactic polystyrene (sPS) and poly(p‐methyl styrene) (sPPMS) are synthesized using silica colloidal crystal templates with varied diameters in the range of 548–214 nm, and the effect of polymerization space on the conformation of the resulting 3DOM polymers is investigated by spectroscopy and thermal analysis. In‐situ polymerizations of styrene and p‐methyl styrene within the silica templates induce the resulting 3DOM polymers with different conformations and packing of chains, which are different from those of bulk polymers prepared in the absence of templates. Polymerizations in restricted silica templates result in un‐helixication of 3DOM sPS chains and helixication of 3DOM sPPMS chains.
The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.
A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.
Summary: The synthesis and thermal, redox and photoluminescence properties of a soluble donor‐acceptor polyplatinayne with the electron‐accepting silole ring and its model compound are described. The polymer has an optical band gap of 2.10 eV which is much lower than that of thienyl‐ or silyl‐bridged congeners. The incorporation of electron‐accepting silole unit in the metallopolymer main chain creates a new π‐conjugated system that features unique donor‐acceptor characteristics.
We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.
The kinetic model of the co‐polycondensation with A2 and AB2 type monomers is developed and the analytical expressions of the various molecular parameters of the products are derived rigorously. The monomer feed ratio (α) of A2 to AB2 significantly affects the molecular parameters and the critical condition of gelation. Gelation can be avoided if α is > . At the critical state, the degree of branching decreases firstly and reaches its minimum value at about α≈0.22. Then, it increases with increasing α‐value. In comparison with experimental results, non‐equal reactivity of the active groups should be considered.
Binary reactive/inert antifouling polymer brushes were grafted via a two step surface initiated polymerization from printed initiator monolayer and provided robust, effective polymeric surfaces for bioattachment with distinguishably reduced non‐specific adsorption. This synthetic strategy can be harnessed to build complex binary polymeric structures on substrate surfaces and the polymer brush surfaces reported in the present paper can be widely used for versatile biological study.
Amphiphilic star shaped polymers with poly(ethylene oxide) (PEO) arms and cross‐linked hydrophobic core were synthesized in water via either conventional free radical polymerization (FRP) or atom transfer radical polymerization (ATRP) techniques using a simple “arm‐first” method. In FRP, PEO based macromonomers (MM) were used as arm precursors, which were then cross‐linked by divinylbenzene (DVB) using 2,2′‐azoisobutyronitrile (AIBN). Uniform star polymers ( < 1.2) were achieved through adjustment of the ratio of PEO MM, DVB, and AIBN. While in case of ATRP, both PEO MM, and PEO based macroinitiator (MI) were used as arm precursors with ethylene glycol diacrylate as cross‐linker. Even more uniform star polymers with less contamination by low MW polymers were obtained, as compared to the products synthesized by FRP.
Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl3 and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.
TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min. 相似文献
The reversible addition‐fragmentation chain transfer chain length dependent termination (RAFT‐CLD‐T) technique allows a simple experimental approach to obtain chain‐length‐dependent termination rate coefficients as a function of conversion, k(x). This work provides a set of criteria by which accurate k(x) can be obtained using the RAFT‐CLD‐T method. Visualization of three‐dimensional plots varying all kinetic rate parameters and starting concentrations demonstrates that only certain combinations give an accurate extraction of k(x). The current study provides hands‐on guidelines for experimentalists applying the RAFT‐CLD‐T method.
Stable aqueous dispersions of nanoparticles were prepared by polyelectrolyte complex formation between well‐defined poly(ethylene glycol)‐block‐poly(2‐acrylamido‐2‐methyl‐1‐propane sodium sulfonate) and poly(ethylene glycol)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] diblock copolymers. Controlled synthesis of the copolymers was achieved by water‐based atom transfer radical polymerization (ATRP). The nanoparticles were characterized by a quite narrow and monomodal size distribution as evidenced by dynamic light scattering (DLS) and confirmed by atomic force microscopy (AFM) after solution casting and freeze‐drying.
Summary: An amino‐functionalized bipyridine ligand was prepared in order to serve as a bridging unit to an activated low‐molecular‐weight monomethyl ether of poly(ethylene glycol) (PEG). Coordination of a ruthenium(II ) phenantroline precursor onto the formed PEG‐containing bipyridine ligand yielded a metal‐containing polymer which shows interesting properties for solar cell applications.
A schematic of the described polymeric ruthenium(II ) complex and its absorption and emission properties. 相似文献
