Silyl‐functionalized polyolefins via co‐polymerization of vinylsilanes with ethylene or propylene catalyzed by group IV metallocene complexes

Vinylsilanes CH₂CHSiR₃ (R = Me, NMe₂, OMe, OTMS) copolymerize with ethylene rapidly in the presence of catalytic amounts of [Cp′₂ZrMe][MeB(C₆F₅)₃] (Cp′ = η⁵‐C₅Me₅) ( I ) to give high molecular weight silyl‐functionalized polyethylene. The molecular weight of the polymer can be controlled by varying the comonomer concentration as well as the reaction temperature. Relatively low molecular weight polymer was produced at a higher silyl monomer concentration and a higher polymerization temperature. The incorporation of silyl monomer in the polymer is in the range of 0.1‐ 6.0%. On the other hands, catalysts [Cp₂ZrMe][MeB(C₆F₅)₃] (Cp′ = η⁵‐C₅H₅) ( II ) and [Cp″₂ZrMe][MeB(C₆F₅)₃] (Cp″ = η⁵‐1,2‐C₅Me₂H₃) ( III ) show much lower activity. With the use of more coordinatively unsaturated constrained geometry catalysts (CGC), Me₂Si(η⁵‐C₅Me₄)(N^tBu)MMe][MeB(C₆F₅)₃] ( IV , M = Zr; V , M = Ti), the silyl monomer incorporation in the polymer was increased to 40%. The Ti catalyst is more active and produces polymer with a higher molecular weight with a higher silyl monomer incorporation at 23 °C. The copolymerization of vinyltrimethylsilane with propylene was also investigated with these catalysts, yielding high silyl‐functionalized propylene copolymer/oligmer. The microstructure of the copolymers/oligomers has been thoroughly investigated by 1D and 2D NMR techniques (¹H, ¹³C, NOE, DEPT, HETCOR, and FLOCK). The results show that the backbone of the copolymers/oligomers is essentially random. Several termination pathways have been identified. In particular, two unsaturated silyl terminations, cis and/or trans‐TMS CHCH , were identified with the constrained geometry catalysts. Their formation was rationalized based on transition state models. It was found that occasional 1,2‐insertion of either propylene or vinyltrimethylsilane into the chain propagation process has a high probability serving as the trigger for polymer chain termination via β‐H elimination. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1308–1321     

Synthese und strukturelle Studien von Aluminiumdialkylaminen und ‐amiden: N‐Chiralität von (CH3)3AlNHRR′ und cis‐trans‐Isomerie an X2AlNRR′ (X = CH3, Cl,H)

Synthesis and Structural Studies of Aluminum Dialkylamines and Dialkylamides: N‐Chirality of (CH₃)₃AlNHRR′ and cis‐trans ‐Isomerism at X₂AlNRR′ (X = CH₃, Cl, H) Aluminum dialkylamines and dialkylamides were prepared from Al(CH₃)₃ and NH(CH₃)R′ (R′: –C₂H₅, –^tC₄H₉) and characterized by elemental analyses, ¹H‐, ¹³C‐, and ²⁷Al‐NMR spectroscopy. The crystal structures of [(CH₃)₂AlN(CH₃)(–^tC₄H₉)]₂ ( IV ), [Cl₂AlN(CH₃)(C₂H₅)]₂ ( V ), and [H₂AlN(CH₃)(C₂H₅)]_∞ ( VI‐trans and VI‐cis ) are discussed.     

含联吡啶，Eu(III)或Gd(III)的手性高分子配合物的合成及荧光性质研究

手性高分子P–1由(R)-5,5′-二溴-6,6′-二(4-三氟甲基苯基)-2,2′-二正辛氧基-1,1′-联萘(R–M–1)和5,5′-二乙烯基-2,2′-联吡啶(M–2)通过Pd催化的Heck偶合反应合成得到,高分子配合物P-2和P-3由高分子P-1与Eu(TTA)3·2H2O和Gd(TTA)3·2H2O (TTA– = 2-噻吩甲酰三氟丙酮)反应生成。手性高分子P-1能发射强的蓝色荧光,这是由于手性重复单元(R)-6,6′-二(4-三氟甲基苯基)-2,2′-二正辛氧基-1,1′-联萘和单元2,2′-联吡啶通过亚乙烯基桥连形成共轭高分子结构造成的。在不同的激发波长激发下,含Eu(III)的高分子配合物P–2不仅显示高分子荧光,还可显示Eu(III) (5D0→7F2)特征荧光。含Gd(III)的高分子配合物P–3仅发射高分子荧光。基于高分子及含RE(III)的高分子配合物的荧光性质研究发现,共轭高分子并没有把能量转移到Eu(III)或Gd(III) 配合物部分,只发射它自身的荧光,含Eu(III)的高分子配合物P–2发射Eu(III) (5D0→7F2)特征荧光能量主要来源于配阴离子TTA–。     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

A novel (3,6)‐connected CdII coordination polymer based on an ether‐linked tricarboxylate ligand: synthesis,topology and luminescence sensing properties in aqueous solution

A novel three‐dimensional coordination polymer, namely, poly[[diaquabis(μ‐4,4′‐bipyridine)bis{μ₃‐5‐[(2‐carboxyphenoxy)methyl]isophthalato}tricadmium(III)] dimethylformamide monosolvate 2.5‐hydrate], {[Cd₃(C₁₆H₉O₇)₂(C₁₀H₈N₂)₂(H₂O)₂]·2C₃H₇NO·5H₂O}_n, was obtained by the reaction of ether‐linked 5‐[(2‐carboxyphenoxy)methyl]isophthalic acid (H₃L) with Cd^II salts in the presence of 4,4′‐bipyridine (bpy) under solvothermal conditions. In this complex, the Cd^II centres are connected by the carboxylate ligands to form two‐dimensional wave‐like layers, which are pillared by bpy ligands and extended into a rare three‐dimensional (3,6)‐connected sqc27 framework. The complex demonstrated good water stability and strong luminescence emissions. It not only possesses excellent luminescence sensing activities toward Fe³⁺ and Cr₂O₇^2? in aqueous solution, but can also distinguish between Cr₂O₇^2? and CrO₄^2? by luminescence. Furthermore, it could be simply and quickly regenerated at least five times. A study of the sensing mechanism indicated that luminescence quenching may be related to the energy competition between the complex and sensing analytes.     

Effect of pH on the charge‐assisted hydrogen‐bonded assembly of the anionic [Cu(oxalate)2]2− building unit and N,N′‐ditopic cations

By the solvothermal reaction under acidic conditions of Cu(NO₃)₂·3H₂O, Na₂C₂O₄ and the N,N′‐ditopic organic coligands 1‐(pyridin‐4‐yl)piperazine (ppz) and 1,2‐bis(pyridin‐4‐yl)ethane (bpa), two novel anionic copper(II) coordination compounds were obtained, namely the one‐dimensional coordination polymer catena‐poly[4‐(pyridin‐1‐ium‐4‐yl)piperazin‐1‐ium [[(oxalato‐κ²O¹,O²)copper(II)]‐μ‐oxalato‐κ³O¹,O²:O^1′]], {(C₉H₁₅N₃)[Cu(C₂O₄)₂)]}_n or {(H₂ppz)[Cu(C₂O₄)₂]}_n, (I), and the discrete ionic complex 4,4′‐(ethane‐1,2‐diyl)dipyridinium bis(oxalato‐κ²O¹,O²)copper(II), (C₁₂H₁₄N₂)[Cu(C₂O₄)₂] or (H₂bpa)[Cu(C₂O₄)₂], (II). The products were characterized by single‐crystal X‐ray diffraction, elemental analysis, powder X‐ray diffraction, thermogravimetric analyses and UV and IR spectroscopic techniques. The [Cu(C₂O₄)₂]²⁻ units for (I) and (II) are stabilized by H₂ppz²⁺ and H₂bpa²⁺ cations, respectively, via charge‐assisted hydrogen bonds. Also, a study of the pH‐controlled synthesis of this system shows that (I) was obtained at pH values of 2–4. When using bpa, a two‐dimensional square‐grid network of [Cu(C₂O₄)(bpa)]_n was obtained at a pH of 4. This indicates that the pH of the reaction also plays a key role in the structural assembly and coordination abilities of oxalate and N,N′‐ditopic coligands.     

A new one‐dimensional coordination polymer of 5‐(1,3‐dioxo‐4,5,6,7‐tetraphenylisoindolin‐2‐yl)isophthalic acid with manganese

The coordination polymer catena‐poly[[(dimethylformamide‐κO)[μ₃‐5‐(1,3‐dioxo‐4,5,6,7‐tetraphenylisoindolin‐2‐yl)isophthalato‐κ⁴O¹,O^1′:O³:O^3′](methanol‐κO)manganese(III)] dimethylformamide monosolvate], {[Mn(C₄₀H₂₃NO₆)(CH₃OH)(C₃H₇NO)]·C₃H₇NO}_n, has been synthesized from the reaction of 5‐(1,3‐dioxo‐4,5,6,7‐tetraphenylisoindolin‐2‐yl)isophthalic acid and manganese(II) acetate tetrahydrate in a glass tube at room temperature by solvent diffusion. The Mn^II centre is hexacoordinated by two O atoms from one chelating carboxylate group, by two O atoms from two monodentate carboxylate groups and by one O atom each from a methanol and a dimethylformamide (DMF) ligand. The single‐crystal structure crystallizes in the triclinic space group P. Moreover, the coordination polymer shows one‐dimensional 2‐connected {0} uninodal chain networks, and free DMF molecules are connected to the chains by O—H...O hydrogen bonds. The thermogravimetric and photoluminescent properties of the compound have also been investigated.     

Syntheses,characterization, powder X‐ray diffraction analysis and antibacterial and antioxidant activities of triphenylantimony(V) heteroleptic derivatives containing substituted oximes and morpholine dithiocarbamate

Triphenylantimony(V) heteroleptic derivatives containing substituted oximes and morpholine dithiocarbamate of the type Ph₃Sb[R(R′)C:NO]₂[S₂CN(CH₂CH₂)₂O] (where R = ─C₆H₅, R′ = ─CH₃ (I); R = ─C₆H₄CH₃, R′ = ─CH₃ (II); R = ─C₆H₄Cl, R′ = ─CH₃ (III); R = ─C₆H₄Br, R′ = ─CH₃ (IV); R = ─C₆H₄OH, R′ = ─H (V); R(R′)C = CCH₂(CH₂)₃CH₂ (VI)) were synthesized by successive substitution reactions of triphenylantimony(V) dibromide with the sodium salt of substituted oximes and morpholine dithiocarbamate in unimolar ratio. All these newly synthesized derivatives were characterized using physicochemical and elemental analyses and tentative structures have been proposed on the basis of infrared, (¹H, ¹³C) NMR and liquid chromatography–mass spectra. Spectral data revealed that the oxime behaves in a monodentate manner whereas morpholine dithiocarbamate behaves in an anisobidentate manner and thus distorted octahedral geometry has been proposed for these derivatives. Nanometric particle size (ca 25 nm) and monoclinic crystal system have been determined using power X‐ray diffraction data of two representative derivatives. Furthermore, these newly synthesized derivatives were screened against two bacteria, Bacillus subtilis (Gram‐positive) and Escherichia coli (Gram‐negative), to evaluate their antibacterial potential. Derivative VI exhibited maximum zone of inhibition (30 mm) against E. coli. Additionally two derivatives (I and II) were tested for their antioxidant potential, with derivative II exhibiting higher antioxidant potential (233 μM g^?1). Structure–activity relationships were also investigated.     

Higher α‐olefin polymerizations catalyzed by rac‐Me2Si(1‐C5H2‐2‐CH3‐4‐tBu)2Zr(NMe2)2/Al(iBu)3/[Ph3C][B(C6F5)4]

Polymerizations of higher α‐olefins, 1‐pentene, 1‐hexene, 1‐octene, and 1‐decene were carried out at 30 °C in toluene by using highly isospecific rac‐Me₂Si(1‐C₅H₂‐2‐CH₃‐4‐^t Bu)₂Zr(NMe₂)₂ (rac‐1) compound in the presence of Al(iBu)₃/[CPh₃][B(C₆F₅)₄] as a cocatalyst formulation. Both the bulkiness of monomer and the lateral size of polymer influenced the activity of polymerization. The larger lateral of polymer chain opens the π‐ligand of active site wide and favors the insertion of monomer, while the large size of monomer inserts itself into polymer chain more difficultly due to the steric hindrance. Highly isotactic poly(α‐olefin)s of high molecular weight (MW) were produced. The MW decreased from polypropylene to poly(1‐hexene), and then increased from poly(1‐hexene) to poly(1‐decene). The isotacticity (as [mm] triad) of the polymer decreased with the increased lateral size in the order: poly(1‐pentene) > poly(1‐hexene) > poly(1‐octene) > poly(1‐decene). The similar dependence of the lateral size on the melting point of polymer was recorded by differential scanning calorimetry (DSC). ¹H NMR analysis showed that vinylidene group resulting from β‐H elimination and saturated methyl groups resulting from chain transfer to cocatalyst are the main end groups of polymer chain. The vinylidene and internal double bonds are also identified by Raman spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1687–1697, 2000     

Structure and electrical properties of a one‐dimensional polymeric silver thiosaccharinate complex with argentophilic interactions

Among the potential applications of coordination polymers, electrical conductivity ranks high in technological interest. We report the synthesis, crystal structure and spectroscopic analysis of an Ag^I–thiosaccharinate one‐dimensional coordination polymer {systematic name: catena‐poly[[[aquatetrakis(μ₃‐1,1‐dioxo‐1,2‐benzisothiazole‐3‐thiolato‐κ³N:S³:S³)tetrasilver(I)]‐μ₂‐4,4′‐(propane‐1,3‐diyl)dipyridine‐κ²N:N′] dimethyl sulfoxide hemisolvate]}, {[Ag₄(C₇H₄NO₂S₂)₄(C₁₃H₁₄N₂)(H₂O)]·0.5C₂H₆OS}_n, with the 4,4′‐(propane‐1,3‐diyl)dipyridine ligand acting as a spacer. A relevant feature of the structure is the presence of an unusually short Ag…Ag distance of 2.8306 (9) Å, well within the range of argentophilic interactions, confirmed experimentally as such by a Raman study on the low‐frequency spectrum, and corroborated theoretically by an Atoms in Molecules (AIM) analysis of the calculated electron density. Electrical conductivity measurements show that this complex can act as a semiconductor with moderate conductivity.     

Structural diversity,magnetic properties and luminescence of NiII,CoII and ZnII coordination polymers derived from 3,3′‐[(5‐carboxy‐1,3‐phenylene)bis(oxy)]dibenzoic acid and 1,10‐phenanthroline

Three novel coordination polymers (CPs), namely poly[[di‐μ‐aqua‐bis{μ₄‐3,3′‐[(5‐carboxylato‐1,3‐phenylene)bis(oxy)]dibenzoato‐κ⁵O¹:O^1′,O³:O⁵:O^5′}bis(1,10‐phenanthroline‐κ²N,N′)trinickel(II)] dimethylformamide 1.5‐solvate trihydrate], {[Ni₃(C₂₁H₁₁O₈)₂(C₁₂H₈N₂)₂(H₂O)₂]·1.5C₃H₇NO·3H₂O}_n, (I), poly[[di‐μ‐aqua‐bis{μ₄‐3,3′‐[(5‐carboxylato‐1,3‐phenylene)bis(oxy)]dibenzoato‐κ⁵O¹:O^1′,O³:O⁵:O^5′}bis(1,10‐phenanthroline‐κ²N,N′)tricobalt(II)] diethylamine disolvate tetrahydrate], {[Co₃(C₂₁H₁₁O₈)₂(C₁₂H₈N₂)₂(H₂O)₂]·2C₂H₇N·4H₂O}_n, (II), and catena‐poly[[aqua(1,10‐phenanthroline‐κ²N,N′)zinc(II)]‐μ‐5‐(3‐carboxyphenoxy)‐3,3′‐oxydibenzoato‐κ²O¹:O³], [Zn(C₂₁H₁₂O₈)(C₁₂H₈N₂)(H₂O)]_n, (III), have been synthesized by the reaction of different metal ions (Ni²⁺, Co²⁺ and Zn²⁺), 3,3′‐[(5‐carboxy‐1,3‐phenylbis(oxy)]dibenzoic acid (H₃cpboda) and 1,10‐phenanthroline (phen) under solvothermal conditions. All the CPs were characterized by elemental analysis, single‐crystal and powder X‐ray diffraction, FT–IR spectroscopy and thermogravimetric analysis. Complexes (I) and (II) have isomorphous structures, featuring similar linear trinuclear structural units, in which the central Ni^II/Co^II atom is located on an inversion centre with a slightly distorted octahedral [NiO₆]/[CoO₆] geometry. This comprises four carboxylate O‐atom donors from two cpboda^3? ligands and two O‐atom donors from bridging water molecules. The terminal Ni^II/Co^II groups are each connected to the central Ni^II/Co^II cation through two μ_1,3‐carboxylate groups from two cpboda^3? ligands and one water bridge, giving rise to linear trinuclear [M₃(μ₂‐H₂O)₂(RCOO)₄] (M = Ni²⁺/Co²⁺) secondary building units (SBUs) and the SBUs develop two‐dimensional‐networks parallel to the (100) plane via cpboda^3? ligands with new (3²·4)₂(3²·8³·9)₂(3⁴·4².8²·9⁴·10³) topological structures. Zinc complex (III) displays one‐dimensional coordination chains and the five‐coordinated Zn atom forms a distorted square‐pyramidal [ZnO₃N₂] geometry, which is completed by two carboxylate O‐atom donors from two distinct Hcpboda^2? ligands, one O atom from H₂O and two N atoms from a chelating phen ligand. Magnetically, CP (I) shows weak ferromagnetic interactions involving the carboxylate groups, and bridging water molecules between the nickel(II) ions, and CP (II) shows antiferromagnetic interactions between the Co²⁺ ions. The solid‐state luminescence properties of CP (III) were examined at ambient temperature and the luminescence sensing of Cr₂O₇^2?/CrO₄^2? anions in aqueous solution for (III) has also been investigated.     

Polymerization of propylene with the [ArN(CH2)3NAr]TiCl2 (Ar = 2,6-iPr2C6H3) complex using R3Al/Ph3CB(C6F5)4 (R = Me,Et, iBu) as cocatalyst

Polymerization of propylene was conducted at 0 ∼ 150°C with the [ArN(CH₂)₃NAr]TiCl₂ (Ar = 2,6-ⁱPr₂C₆H₃) complex using a mixture of trialkylaluminium (AIR₃, R = methyl, ethyl and isobutyl) and Ph₃CB(C₆F₅₎₄ as cocatalyst. When AlMe₃ or AlEt₃ was employed, atactic polypropylene (PP) was selectively produced, whereas the use of Al(ⁱBu)₃ gave a mixture of atactic and isotactic PP. The isotactic index (I.I.; weight fraction of isotactic polymer) depended strongly upon the polymerization temperature, and the highest I.I. was obtained at ca. 40°C. The ¹³C NMR analysis of the isotactic polymer suggests that the isotactic polymerization proceeds by an enantiomorphic-site mechanism. It was also demonstrated that the present catalyst shows a very high regiospecificity.     

Reduction of Disilane (tBu3Si)Br2Si‐SiBr2(SitBu3) in Presence of C2H4: A Mechanistic Approach

The reduction of R*–SiBr₂–SiBr₂–R* ( 2 ) with NaR* (R* = supersilyl = SitBu₃) in presence of C₂H₄ provides a white crystalline solid (η²‐C₂H₄)R*Si–SiR*(Br)(CH₂–CH₂–R*) ( 3 ) characterized by X‐ray diffraction analysis. Compound 3 is accompanied with an impurity of R*(Br)₂Si–Si(Br)(R*)(CH₂–CH₂–R*) ( 4 ). The formation of 3 and 4 runs complicated because of several reactive partners. However, reduction of 2 with sodium naphthalenide in presence of ethene runs straightforward with formation of a mixture of tetrahedrane R*₄Si₄ ( 1 ) and bis(silirane) R*(η²‐C₂H₄)Si–Si(η²‐C₂H₄)R* ( 5 ). The latter is formed by [1+2]‐cycloaddition reaction of intermediate disilyne R*Si≡SiR* with ethene. Compound 5 has been characterized by X‐ray structure determination. The ¹H NMR spectrum of the silacyclopropane ring protons shows AA′BB′ complex spectrum comprising of 2 sets each of 12 transitions.     

Synthesis,characterization, and metal complexes of polyacetylenes with pendant 2,2′‐bipyridyl groups

5‐Ethynyl‐2,2′‐bipyridine ( 1 ; bpyC≡CH) polymerized in the presence of catalytic amounts of [RhF(COD)(PPh₃)] or [Rh(μ‐OH)(COD)]₂ (COD = 1,5‐cyclooctadiene) in 74–91% yields. In contrast, [Rh(μ‐X)(NBD)]₂ (X = Cl or OMe; NBD = norbornadiene) did not catalyze the polymerization of 1 or gave low yields of the polymer. The obtained polymer, poly(5‐ethynyl‐2,2′‐bipyridine) [ 2 ; (bpyC?CH)_n], was highly stereoregular with a predominant cis–transoidal geometry. Random copolyacetylenes containing the 2,2′‐bipyridyl group with improved solubility in organic solvents were obtained by the treatment of a mixture of 1 and phenylacetylene ( 3 ) or 1‐ethynyl‐4‐n‐pentyl‐benzene with catalytic amounts of [RhF(COD)(PPh₃)]. A block copolymer of 1 and 3 was prepared by the addition of 1 to a poly(phenylacetylene) containing a living end. The reaction of 2 with [Mo(CO)₆] produced an insoluble polymer containing [Mo(CO)₄(bpy)] groups, whereas with [RuCl₂(bpy)₂] or [Ru(bpy)₂(CH₃COCH₃)₂](CF₃SO₃)₂, it gave soluble metal–polymer complexes containing [Ru(bpy)₃]²⁺ groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:3167–3177, 2005     

A threefold interpenetrating two‐dimensional zinc(II) coordination polymer: synthesis,crystal structure and selective luminescence sensing properties

The Fe³⁺ ion is the most important element in environmental systems and plays a fundamental role in biological processes. Iron deficiency can result in diseases and highly selective and sensitive detection of trace Fe³⁺ has become a hot topic. A novel two‐dimensional Zn^II coordination framework, poly[[μ‐4,4′‐bis(2‐methylimidazol‐1‐yl)diphenyl ether‐κ²N³:N^3′](μ‐4,4′‐sulfonyldibenzoato‐κ²O:O′)zinc(II)], [Zn(C₁₄H₈O₆S)(C₂₀H₁₈N₄O)]_n or [Zn(SDBA)(BMIOPE)]_n, (I), where H₂SDBA is 4,4′‐sulfonyldibenzoic acid and BMIOPE is 4,4′‐bis(2‐methylimidazol‐1‐yl)diphenyl ether, has been prepared and characterized by IR, elemental analysis, thermal analysis and X‐ray diffraction analysis, the latter showing that the coordination polymer exhibits a threefold interpenetrating two‐dimensional 4⁴‐ sql network. In addition, it displays a highly selective and sensitive sensing for Fe³⁺ ions in aqueous solution.     

Coordination polymers and hydrogen‐bonded assemblies of 2,2′‐[2,5‐bis(carboxymethoxy)‐1,4‐phenylene]diacetic acid with ammonium,lanthanum and zinc cations

We report the synthesis of the 2,2′‐[2,5‐bis(carboxymethoxy)‐1,4‐phenylene]diacetic acid (TALH₄) ligand and the structures of its adducts with ammonium, namely diammonium 2,2′‐[2,5‐bis(carboxymethyl)‐1,4‐phenylenedioxy]diacetate, 2NH₄⁺·C₁₄H₁₂O₁₀²⁻, (I), lanthanum, namely poly[[aquabis[μ₄‐2,2′‐(2‐carboxylatomethyl‐5‐carboxymethyl‐1,4‐phenylenedioxy)diacetato]dilanthanum(III)] monohydrate], {[La₂(C₁₄H₁₁O₁₀)₂(H₂O)]·H₂O}_n, (II), and zinc cations, namely poly[[{μ₄‐2,2′‐[2,5‐bis(carboxymethyl)‐1,4‐phenylenedioxy]diacetato}zinc(II)] trihydrate], {[Zn(C₁₄H₁₂O₁₀)]·3H₂O}_n, (III), and poly[[diaqua(μ₂‐4,4′‐bipyridyl){μ₄‐2,2′‐[2,5‐bis(carboxymethyl)‐1,4‐phenylenedioxy]diacetato}dizinc(II)] dihydrate], {[Zn₂(C₁₄H₁₀O₁₀)(C₁₀H₈N₂)(H₂O)₂]·2H₂O}_n, (IV), the formation of all four being associated with deprotonation of TALH₄. Adduct (I) is a diammonium salt of TALH₂²⁻, with the ions located on centres of crystallographic inversion. Its crystal structure reveals a three‐dimensional hydrogen‐bonded assembly of the component species. Reaction of TALH₄ with lanthanum trinitrate hexahydrate yielded a two‐dimensional double‐layer coordination polymer, (II), in which the La^III cations are nine‐coordinate. With zinc dinitrate hexahydrate, TALH₄ forms 1:1 two‐dimensional coordination polymers, in which every Zn^II cation is linked to four neighbouring TALH₂²⁻ anions and each unit of the organic ligand is coordinated to four different tetrahedral Zn^II cation connectors. The crystal structure of this compound accommodates molecules of disordered water at the interface between adjacent polymeric layers to give (III), and it has been determined with low precision. Another polymer assembly, (IV), was obtained when zinc dinitrate hexahydrate was reacted with TALH₄ in the presence of an additional 4,4′‐bipyridyl ligand. In the crystal structure of (IV), the bipyridyl and TAL⁴⁻ entities are located on two different inversion centres. The ternary coordination polymers form layered arrays with corrugated surfaces, with the Zn^II cation connectors revealing a tetrahedral coordination environment. The two‐dimensional polymers in (II)–(IV) are interconnected with each other by hydrogen bonds involving the metal‐coordinated and noncoordinated molecules of water. TALH₄ is doubly deprotonated, TALH₂²⁻, in (I) and (III), triply deprotonated, viz. TALH³⁻, in (II), and quadruply deprotonated, viz. TAL⁴⁻, in (IV). This report provides the first structural characterization of TALH₄ (in deprotonated form) and its various supramolecular adducts. It also confirms the potential utility of this tetraacid ligand in the formulation of coordination polymers with metal cations.     

The crystal structure,luminescence and nitrobenzene‐sensing properties of a two‐dimensional MnII coordination polymer based on 2,6‐bis(imidazol‐1‐yl)pyridine

A two‐dimensional Mn^II coordination polymer (CP), poly[bis[μ₂‐2,6‐bis(imidazol‐1‐yl)pyridine‐κ²N³:N^3′]bis(thiocyanato‐κN)manganese] [Mn(NCS)₂(C₁₁H₉N₅)₂]_n, (I), has been obtained by the self‐assembly reaction of Mn(ClO₄)₂·6H₂O, NH₄SCN and bent 2,6‐bis(imidazol‐1‐yl)pyridine (2,6‐bip). CP (I) was characterized by FT–IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction. The crystal structure features a unique two‐dimensional (4,4) network with one‐dimensional channels. The luminescence and nitrobenzene‐sensing properties were explored in a DMF suspension, revealing that CP (I) shows a strong luminescence emission and is highly sensitive for nitrobenzene detection.     

Two novel lanthanide(III) organic frameworks based on a biphenyltetracarboxylate ligand: synthesis,structure and magnetic and luminescence properties

Two new two‐dimensional lanthanide coordination polymers, namely poly[[tetra‐μ₂‐acetato‐tetraaquabis(μ₄‐biphenyl‐3,3′,5,5′‐tetracarboxylato)tetrakis(dimethylacetamide)tetraterbium(III)] pentahydrate], {[Tb₄(C₁₆H₆O₈)₂(C₂H₃O₂)₄(C₄H₉NO)₄(H₂O)₄]·5H₂O}_n, (1), and poly[[tetra‐μ₂‐acetato‐tetraaquabis(μ₅‐biphenyl‐3,3′,5,5′‐tetracarboxylato)tetrakis(dimethylacetamide)tetraeuropium(III)] tetrahydrate], {[Eu₄(C₁₆H₆O₈)₂(C₂H₃O₂)₄(C₄H₉NO)₄(H₂O)₄]·4H₂O}_n, (2), have been synthesized from biphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄bpt) and Ln(NO₃)₃·6H₂O (Ln = Tb and Eu) under solvothermal conditions. Single‐crystal X‐ray structure analysis shows that the two compounds are isostructural and crystallize in the monoclinic P2₁/n space group. The crystal structures are constructed from bpt⁴⁻ ligands (as linkers) and {Ln₂(μ₂‐CH₃COO)₂} building units (as nodes), which topological analysis shows to be a (4,6)‐connected network with sql topology. Compounds (1) and (2) have been characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA) and fluorescence analysis in the solid state. In addition, a magnetic investigation shows the presence of antiferromagnetic interactions in compound (1).     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

A Widely Applicable Synthetic Approach to Alk‐1‐yn‐1‐yl(polyfluoroorganyl)‐iodonium Salts [(RC≡C)(R′)I][BF4]

The reaction of alkynyldifluoroboranes RC≡CBF₂ (R = (CH₃)₃C, CF₃, (CF₃)₂CF) with organyliodine difluoride R′IF₂ bearing electron‐withdrawing polyfluoroorganyl groups R′ = C₆F₅, (CF₃)₂CFCF=CF, C₄F₉, and CF₃CH₂ leads to the corresponding alkynyl(organyl)iodonium salts [(RC≡C)(R′)I][BF₄]. This approach uses a widely applicable method as demonstrated for a representative series of polyfluorinated aryl‐, alkenyl‐, and alkyliodine difluorides. Generally, these syntheses proceed with good yields and deliver pure iodonium salts. The distinct electrophilic nature of their [(RC≡C)(R′)I]⁺ cations is deduced from multinuclear magnetic resonance data. Within the series of new iodonium salts [CF₃C≡C(C₄F₉)I][BF₄] is an intrinsic unstable one and decomposed forming CF₃C≡CI and C₄F₁₀.