The kinetic model of the co‐polycondensation with A2 and AB2 type monomers is developed and the analytical expressions of the various molecular parameters of the products are derived rigorously. The monomer feed ratio (α) of A2 to AB2 significantly affects the molecular parameters and the critical condition of gelation. Gelation can be avoided if α is > . At the critical state, the degree of branching decreases firstly and reaches its minimum value at about α≈0.22. Then, it increases with increasing α‐value. In comparison with experimental results, non‐equal reactivity of the active groups should be considered.
Summary: Monte Carlo simulation on a simple lattice model has been used to study the adsorption of asymmetrical triblock copolymers from a non‐selective solvent at the solid‐liquid interface. The size distributions of train, loop and tail configurations for those copolymers are obtained as well as other details of the adsorption layer microstructure. Also the influence of adsorption energy and the role of molecular symmetry are investigated. A segment‐density profile, the adsorption amount, the surface coverage, and the adsorption layer thickness have been determined. Finally, it is shown that the adsorption behavior of an asymmetrical copolymer can be predicted from the symmetrical copolymer.
Size distributions of the tail configuration for A8−kB20Ak. 相似文献
Poly(N‐isopropylacrylamide) (PNIPAM) oligomer containing one adamantyl (AD) and two β‐cyclodextrin (β‐CD) moieties at the chain terminals, AD‐PNIPAM‐(β‐CD)2, was synthesized by atom transfer radical polymerization (ATRP) and successive click reactions. In aqueous solution, AD‐PNIPAM‐(β‐CD)2 spontaneously forms supramolecular thermoresponsive hyperbranched polymers via molecular recognition between AD and β‐CD moieties. To the best of our knowledge, this work represents the first report of the construction of supramolecular thermoresponsive hyperbranched polymers from well‐defined polymeric AB2 building units.
Summary: Two series of hyperbranched conjugated polymers were synthesized via an A3 + B2 type Wittig reaction. The molecular weights of the polymers were successfully tuned by simply changing the feed ratio of the monomers. Polymers with higher molecular weights presented more efficient photoluminescence, higher thermal stability and higher performance of LEDs.
In this paper, a new nonlinear optical (NLO) hyperbranched polymer P1 is designed and synthesized successfully through one‐pot “A3+B2” approach via a simple Sonogashira coupling reaction, in which isolation chromophore is introduced to improve its comprehensive performance such as NLO activity, optical transparency, and stability. For comparison, its analogs, P2 and P3 , just containing one type of chromophore, are also prepared. Although P1 cannot be well poled under our test conditions, its NLO coefficient is still much higher than its analogs P2 , P3, and the linear polyaryleneethynylene P4 , which also contains isolation chromophore, indicating the advantages of isolation chromophore and the three‐dimensional (3D) spatial isolation from the highly branched structure in the NLO field.
A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL−1 as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq3 device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.
This paper reviews the precise synthesis of many‐armed and multi‐compositional star‐branched polymers, exact graft (co)polymers, and structurally well‐defined dendrimer‐like star‐branched polymers, which are synthetically difficult, by a commonly‐featured iterative methodology combining living anionic polymerization with branched reactions to design branched polymers. The methodology basically involves only two synthetic steps; (a) preparation of a polymeric building block corresponding to each branched polymer and (b) connection of the resulting building unit to another unit. The synthetic steps were repeated in a stepwise fashion several times to successively synthesize a series of well‐defined target branched polymers.
Films of polyaniline (PANI) featuring about 80% crystallinity and characterised with strong π‐π stacking alignment parallel to the film surface have been obtained directly after the original synthesis upon simple drying of the aqueous PANI suspension. A strong anisotropy in the growth of the nano‐sized crystals produced during the synthesis results in the formation of micrometer‐length fibrils perpendicular to the film surface in the course of water evaporation. The regular intercalation of water molecules between the PANI chains seems to be crucial for their ordering throughout the synthesis and film formation.
Three copolymers that incorporate dithieno[3,2‐b:2′,3′‐d]pyrrole with fluorene, carbazole, or pyridine have been prepared by Suzuki reaction and characterized by NMR spectroscopy and GPC. A new homopolymer of dithieno[3,2‐b:2′,3′‐d]pyrrole was also synthesized for the comparison of their structure–property relationships. Their thermal, optical, and electrochemical properties have been investigated. All the polymers exhibit good thermal stability with decomposition temperatures around 400 °C. The fluorescence quantum efficiencies of all these polymers in solution are in the range of 33.5–55.5%. The copolymers also show high film fluorescence quantum efficiencies of about 20% while the fluorescence of the homopolymer film is almost quenched.
A set of rigid π‐conjugated bis(terpyridine) macroligands with poly(ε‐caprolactone) (pCL) on their side chains was synthesized and investigated. The introduced pCL chains gave rise to enhanced processability and film‐forming properties of the materials. Blue photoluminescence with high quantum yields was observed in dilute solution and in the solid state, indicating that intermolecular aggregation of the π‐conjugated systems was effectively suppressed. The macroligands were further used for coordination with zinc(II) ions leading to new metallo‐polymers with high solubility, improved film‐forming behavior and promising photophysical properties with respect to potential OLED applications.
Nonlinear optical vinyl polymers with high glass transition temperature (Tg) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.
The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here. 相似文献
Summary: The evolution of the various structural units incorporated into hyperbranched polymers formed from the copolymerization of AB2 and AB monomers has been derived by the kinetic scheme. The degree of branching was calculated with a new definition given in this work. The degree of branching monotonously increased with increasing A group conversion (x) and the maximum value could reach 2r/(1 + r)2, where r is the initial fraction of AB2 monomers in the total. Like the average degree of polymerization, the mean‐square radius of gyration of the hyperbranched polymers increased moderately with A group conversion in the range x < 0.9 and displayed an abrupt rise when the copolymerization neared completion. The characteristic ratio of the mean‐square radius of gyration remained constant for the linear polymers. However, the hyperbranched polymers did not possess this character. In comparison with the linear polymerization, the weight average and z‐average degree of polymerization increased due to the addition of the branched monomer units AB2 and the mean‐square radius of gyration decreased quickly for the products of copolymerization.
In this communication an extended “in–out” polymerization method is presented, which leads to the synthesis of novel heteroarm star block terpolymers of the type An(B‐b‐C)n. A four step/one‐pot synthetic procedure is pursued using anionic polymerization under an inert atmosphere. The resulted star‐shaped terpolymer consists of a divinyl benzene nodule bearing pure polystyrene and poly(hexyl methacrylate)‐block‐poly(methyl methacrylate) diblock copolymer arms. It is shown that this kind of star terpolymers can self‐assemble in the bulk forming lamellae mesophase by arm and block segregation. The mechanical properties of the terpolymer have been examined in detail. Finally, the proposed synthetic procedure can be easily employed in other controlled polymerization methods.
Novel conjugated carbazole polymers based on the alkyne‐linked 1,8‐carbazole structure are synthesized in high yield by the Sonogashira cross‐coupling reaction and acetylenic oxidative coupling reaction. The polymers are thermally stable and highly soluble in common organic solvents such as CHCl3, CH2Cl2, and THF. As compared to ethynylene‐linked polymer, the butadiynylene‐linked polymer display a bathochromic shift in the absorption maximum and end absorption position. In addition, the fluorescence behaviors in CH2Cl2 are almost identical for both polymers. Electrochemical measurements indicate that the ethynylene‐linked polymer possesses a lower first oxidation potential than the butadiynylene‐linked one.
The modification of polymers after the successful achievement of a polymerization process represents an important task in macromolecular science. Cycloaddition reactions, among them the metal catalyzed azide/alkyne ‘click’ reaction (a variation of the Huisgen 1,3‐dipolar cycloaddition reaction between terminal acetylenes and azides) represents an important contribution towards this endeavor. They combine high efficiency (usually above 95%) with a high tolerance of functional groups and solvents, as well as moderate reaction temperatures (25–70 °C). The present review assembles recent literature for applications of this reaction in the field of polymer science (linear polymers, dendrimers, gels) as well as the use of this and related reactions for surface modification on carbon nanotubes, fullerenes, and on solid substrates, and includes the authors own publications in this field. A number of references (>100) are included.
PCL microspheres featuring a macroporous morphology and a bone‐bioactive surface have been prepared. ‘Camphene’ was introduced to generate pores within the microsphere network. The pore size was variable from a few to tens to hundreds of µm depending on the Camphene/PCL ratio. Macropores (with sizes >50 µm) could be obtained with a Camphene/PCL ratio exceeding 6. The microsphere surface was further tailored with apatite mineral phase through solution‐mediated precipitation, to endow the interface with bone bioactivity. Rat bone marrow stromal cells attached and spread actively on microspheres and populated well within their macropores. The developed microspheres may be potentially applicable as a cell delivery scaffold for bone tissue engineering.
A new strategy for the self‐polymerization of chromophores is investigated to develop a 2,7‐carbazole‐based nonlinear optical (NLO) conjugated polymer with an increasing conjugation length of chromophores. Elongation of the conjugation‐path length in chromophores has established engineering guidelines to enhance optical nonlinearity. Compared with the traditional synthesis of an NLO polymer, the chromophores should be well‐designed at a limited conjugation spacer, and then incorporated into a polymer matrix. In this research, the π‐conjugation spacer of chromophores extended perpendicularly to the dipole of chromophores during the polymerization process. Furthermore, this study marks the first research of integrating the π‐electrons of chromophores and conjugated polymers. These conjugated backbones promote a bulk‐polarization response, leading to large NLO coefficients.
Summary: We study the impact of topological disorder on the mechanical response of hyperbranched macromolecules from a theoretical and numerical perspective. The polymer models are generated using a bond switching algorithm, and the emerging systems are described within the Zimm and Rouse pictures of macromolecular dynamics. The topological disorder is manifest in the frequency‐dependent dynamic moduli, . These are clearly distinct from that of regular hyperbranched fractals of the same size, and they do not obey simple scaling rules. The dynamic moduli reflect the short‐range order inherent in the model, and we thus suggest that the extent of disorder in branched tree‐like polymers may be well‐estimated experimentally using .
This communication details the successful synthesis of low polydispersity core cross‐linked star (CCS) polymers via DPE‐mediated polymerisation. We demonstrate the ability to produce poly(methyl methacrylate) and poly(acrylonitrile) CCS polymers that are currently inaccessible via the two most common non‐metal‐based controlled radical polymerisation techniques (NMP and RAFT polymerisations).
