Synthesis of a Novel ABC Triblock Copolymer with a Rigid‐Rod Block via Atom Transfer Radical Polymerization

Summary: A novel ABC triblock copolymer with a rigid‐rod block was synthesized by atom transfer radical polymerization (ATRP). First, a poly(ethylene oxide) (PEO)‐Br macroinitiator was synthesized by esterification of PEO with 2‐bromoisobutyryl bromide, which was subsequently used in the preparation of a poly(ethylene oxide)‐block‐poly(methyl methacrylate) (PEO‐b‐PMMA) diblock copolymer by ATRP. A poly(ethylene oxide)‐block‐poly(methyl methacrylate)‐block‐poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (PEO‐b‐PMMA‐b‐PMPCS) triblock copolymer was then synthesized by ATRP using PEO‐b‐PMMA as a macroinitiator.

ABC triblock copolymer with a rigid‐rod block.     

Novel Wormlike Nanostructures Self‐Assembled in a Well Defined Liquid Crystalline Diblock Copolymer with Azobenzene Moieties

Novel wormlike nanostructures were self‐assembled in bulk films of a well defined diblock copolymer with azobenzene moieties, which was prepared by atom transfer radical polymerization (ATRP). For comparison, a homopolymer with almost the same repeat units of azobenzene as those in the copolymer was also prepared. They both had well defined structures and exhibited a smectic liquid crystalline phase. Upon annealing the copolymer films, poly(methyl methacrylate) formed a matrix with excellent optical properties, and the azobenzene segment in the minority phase self‐assembled into a wormlike mesogenic domain in the bulk films. Such block copolymer films exhibited stability and transparency by eliminating the scattering of visible light, indicating their potential application as photoresponsive functional materials. Although wormlike morphologies have been obtained in micelles from block copolymer solutions, to the best of our knowledge, such wormlike nanostructures have never been explored in bulk films.

     

Atom Transfer Radical Polymerization of N‐Isopropylacrylamide

Summary: Controlled polymerization of N‐isopropylacrylamide (NIPAAM) was achieved by atom transfer radical polymerization (ATRP) using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/tris(2‐dimethylaminoethyl)amine (Me₆TREN) as a catalytic system. The polymerization was carried out in DMF:water 50:50 (v/v) mixed solvent at 20 °C. The first order kinetic plot was linear up to 92% conversion. Controlled molecular weights up to 2.2 × 10⁴ and low polydispersities (1.19) were obtained. The living character of the polymerization was also demonstrated by self‐blocking experiments. Block copolymers with N,N‐dimethylacrylamide (DMAAM) and 3‐sulfopropyl methacrylate (SPMA) were successfully prepared.

Molecular weights and polydispersities of polyNIPAAM versus NIPAAM conversion for two different degrees of polymerization.     

Atom Transfer Radical Polymerization with Polypeptide Initiators: A General Approach to Block Copolymers of Sequence‐Defined Polypeptides and Synthetic Polymers

Summary: A novel two‐step polymerization strategy allowing the integration of sequence‐defined oligopeptides into synthetic polymers has been demonstrated by the successful synthesis of an oligopeptide‐block‐poly(n‐butyl acrylate) copolymer. The approach utilizes a solid‐phase supported synthesis of an oligopeptide macroinitiator (SPPS) followed by solution‐phase atom transfer radical polymerization (ATRP) initiated by the oligopeptide macroinitiator. The resulting block copolymer exhibited a low (1.19) and a controllable .

Poly(n‐butyl acrylate)‐block‐oligopeptide.     

Synthesis of Block Copolymers by Combination of Atom Transfer Radical Polymerization and Visible Light‐Induced Free Radical Promoted Cationic Polymerization

A new synthetic approach for the preparation of block copolymers by mechanistic transformation from atom transfer radical polymerization (ATRP) to visible light‐induced free radical promoted cationic polymerization is described. A series of halide end‐functionalized polystyrenes with different molecular weights synthesized by ATRP were utilized as macro‐coinitiators in dimanganese decacarbonyl [Mn₂(CO)₁₀] mediated free radical promoted cationic photopolymerization of cyclohexene oxide or isobutyl vinyl ether. Precursor polymers and corresponding block copolymers were characterized by spectral, chromatographic, and thermal analyses.     

Filling Polymersomes with Polymers by Peroxidase‐Catalyzed Atom Transfer Radical Polymerization

Polymersomes that encapsulate a hydrophilic polymer are prepared by conducting biocatalytic atom transfer radical polymerization (ATRP) in these hollow nanostructures. To this end, ATRPase horseradish peroxidase (HRP) is encapsulated into vesicles self‐assembled from poly(dimethylsiloxane)‐block‐poly(2‐methyl‐2‐oxazoline) (PDMS‐b‐PMOXA) diblock copolymers. The vesicles are turned into nanoreactors by UV‐induced permeabilization with a hydroxyalkyl phenone and used to polymerize poly(ethylene glycol) methyl ether acrylate (PEGA) by enzyme‐catalyzed ATRP. As the membrane of the polymersomes is only permeable for the reagents of ATRP but not for macromolecules, the polymerization occurs inside of the vesicles and fills the polymersomes with poly(PEGA), as evidenced by ¹H NMR. Dynamic and static light scattering show that the vesicles transform from hollow spheres to filled spheres during polymerization. Transmission electron microscopy (TEM) and cryo‐TEM imaging reveal that the polymersomes are stable under the reaction conditions. The polymer‐filled nanoreactors mimic the membrane and cytosol of cells and can be useful tools to study enzymatic behavior in crowded macromolecular environments.

     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of Well‐Defined Rod‐Coil Diblock Copolymer of Aromatic Polyether and Polyacrylonitrile by Chain‐Growth Condensation Polymerization and Atom Transfer Radical Polymerization

The synthesis of diblock copolymers of aromatic polyether and polyacrylonitrile (PAN) was conducted by chain‐growth condensation polymerization (CGCP) and atom transfer radical polymerization (ATRP) from an orthogonal initiator. When CGCP for aromatic polyether was carried out from a PAN macroinitiator obtained by ATRP with an orthogonal initiator, decomposition of the PAN backbone occurred. However, when ATRP of acrylonitrile was conducted from an aromatic polyether macroinitiator obtained by CGCP followed by introduction of an ATRP initiator unit, the polymerization proceeded in a well‐controlled manner to yield aromatic polyether‐block‐polyacrylonitrile (polyether‐b‐PAN) with low polydispersity. This block copolymer self‐assembled in N,N‐dimethylformamide to form bundle‐like or spherical aggregates, depending on the length of the PAN units in the block copolymer.

     

Atom Transfer Radical Polymerization of N,N‐Dimethylacrylamide

Summary: The living polymerization of N,N‐dimethylacrylamide was achieved by atom transfer radical polymerization catalyzed by copper chloride complexed with a new ligand, N,N′‐bis(pyridin‐2‐ylmethyl 3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED). With methyl 2‐chloropropionate as the initiator, the polymerization reached high conversions (> 90%) at 80 °C and 100 °C, producing polymers with very close to theoretical values and low polydispersity. The ligand, temperature, and copper halide strongly affected the activity and control of the polymerization.

PDMA molecular weight and polydispersity dependence on the DMA conversion in the DMA bulk polymerizations at different temperatures: DMA/CuCl/MCP/BPED = 100/1/1/1, 100 °C (♦, ⋄); 80 °C (▴, ▵); 60 °C (▪, □); and DMA/CuCl/MCP/BPED = 100/1/1/2, 80 °C (•, ○).     

三嵌段共聚物PS-PHB-PS的原子转移自由基聚合

为了克服聚β-羟基丁酸酯(PHB)的弱点, 得到性能良好的新材料, 本文利用原子转移自由基聚合方法, 以Br-PHB-Br为大分子引发剂, 苯乙烯为单体, 在CuBr/N,N,N′,N″,N″-五甲基–二乙基三胺(PMDETA)催化体系作用下合成了一种新的三嵌段共聚物聚苯乙烯-聚β-羟基丁酸酯-聚苯乙烯(PS-PHB-PS). 共聚物的链结构利用¹H NMR和¹³C NMR进行了表征, 分子量特性和链段组成利用凝胶渗透色谱(SEC)方法进行了测定. 聚合物的分子量随单体转化率的增加而线性增加, 分子量分布指数相对较窄. 这些特征都满足原子转移自由基活性聚合的理想要求. 所得到的共聚物PS-PHB-PS具有较好的生物相容性, 与PHB相比具有良好的耐热性.     

原子转移自由基聚合的最新研究进展

原子转移自由基聚合(ATRP)是目前为止最具工业化应用前景的“活性”/可控自由基聚合之一。近年来对其广泛的研究使这一技术逐渐向着“提高可操作性”与“尽可能地减少金属催化剂用量”方面发展;与此同时,诞生了不同催化体系的ATRP衍生技术,如反向原子转移自由基聚合(RATRP)、正向反向同时引发的原子转移自由基聚合(SR&NI ATRP)、引发剂连续再生催化剂原子转移自由基聚合(ICAR ATRP)、电子转移生成催化剂的原子转移自由基聚合(AGET ATRP)和电子转移再生催化剂原子转移自由基聚合(ARGET ATRP)等多种基于ATRP的新方法。本文概述了这几种ATRP体系的发展历程与基本原理,并对其国内外的最新研究进展进行了综述。     

A Theoretical Exploration of the Potential of ICAR ATRP for One‐ and Two‐Pot Synthesis of Well‐Defined Diblock Copolymers

Kinetic Monte Carlo simulations are performed to investigate the capability of ICAR ATRP for the synthesis of well‐defined poly(isobornyl acrylate‐b‐styrene) block(‐like) copolymers using one‐pot semi‐batch and two‐pot batch procedures. The block copolymer quality is quantified via a block deviation (〈BD〉) value. For 〈BD〉 values lower than 0.30, the quality is defined as good and for well‐chosen polymerization conditions the formation of homopolymer chains upon addition of the second monomer can be suppressed. A better block quality is obtained when isobornyl acrylate is polymerized first. For lower Cu levels a one‐pot semi‐batch procedure allows a much faster ATRP and better control over the polymer properties than a two‐pot batch procedure.

     

酚氧基联烯基醚单体的原子转移自由基聚合研究

以具有较高活性的酚氧基联烯基醚(POA)和对叔丁基酚氧基联烯基醚(t-BuPOA)为研究对象, 研究了不同引发 剂/配体体系对其原子转移自由基(ATRP)聚合行为的影响. 发现在2-溴代丙酸甲酯/溴化亚铜/4,4’-二庚基联吡啶(2-MBP/CuBr/dHbpy)和对甲苯磺酰氯/溴化亚铜/三-(N,N-二甲基氨基乙基)胺(p-TsCl/CuBr/Me6TREN)两种ATRP反应体系中, POA的聚合都遵循ATRP反应的机理.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Uniform PEO Star Polymers Synthesized in Water via Free Radical Polymerization or Atom Transfer Radical Polymerization

Amphiphilic star shaped polymers with poly(ethylene oxide) (PEO) arms and cross‐linked hydrophobic core were synthesized in water via either conventional free radical polymerization (FRP) or atom transfer radical polymerization (ATRP) techniques using a simple “arm‐first” method. In FRP, PEO based macromonomers (MM) were used as arm precursors, which were then cross‐linked by divinylbenzene (DVB) using 2,2′‐azoisobutyronitrile (AIBN). Uniform star polymers ( < 1.2) were achieved through adjustment of the ratio of PEO MM, DVB, and AIBN. While in case of ATRP, both PEO MM, and PEO based macroinitiator (MI) were used as arm precursors with ethylene glycol diacrylate as cross‐linker. Even more uniform star polymers with less contamination by low MW polymers were obtained, as compared to the products synthesized by FRP.

     

Synthesis of Novel Rod‐Coil Amphiphilic Block Copolymers PAA‐b‐DPS with Fréchet‐Type Dendronized Polystyrene and Poly(acrylic acid)

A series of well‐defined rod‐coil PAA‐b‐DPS block copolymers, containing Fréchet‐type dendronized polystyrene (DPS) with different generation as a rod‐like hydrophobic block and poly(acrylic acid) (PAA) as a hydrophilic coil were synthesized. The procedure included the following steps: the precursor PMA‐b‐DPS copolymer was prepared through ATRP of Fréchet‐type dendritic styrene macromonomer bearing the first to the third generation (G1–G3), respectively, initiated by poly(methyl acrylate) (PMA‐Br). Then, by converting PMA into PAA by subsequent hydrolysis, the targeted amphiphilic copolymers were obtained. Moreover, by using the rod‐coil amphiphiles as building blocks, large compound micelles and vesicles were formed in a binary solvent mixture of DMF/H₂O. Morphological changes in self‐assembly showed dependence on the length of the dendronized block.

     

Preparation of Well‐Defined Poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] Diblock Copolymers by Water‐Based Atom Transfer Radical Polymerization

Summary: Well‐defined poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] diblock copolymers [P(EO_m‐b‐AMPS_n)], have been obtained by water‐based ATRP using α‐methoxy‐ω‐(2‐methylbromoisobutyrate) poly(ethylene oxide)s (MeO‐P[EO]_m‐BrⁱB with m ranging from 12 to 113) and CuBr · 2Bpy (Bpy for 2,2′‐bipyridyl) as macroinitiator and catalytic complex, respectively. Compared to direct polymerization in water, it has been demonstrated that the water/methanol (3:1, v/v) mixture is better suited for predicting the final number‐average molar mass from the initial monomer‐to‐macroinitiator molar ratio and achieving a quite narrow polydispersity, even at high monomer conversion ( ≈ 1.4 at 80% conversion). The effect of temperature, solvent mixture composition and addition of NaCl salt on the polymerization rate and extent of control over the copolymer molecular parameters have been highlighted as well.

     

Synthesis,characterization and photoinduction of optical anisotropy in liquid crystalline diblock azo‐copolymers

Diblock copolymers with polymethyl methacrylate and side chain liquid crystalline (LC) azopolymethacrylate blocks were synthesized by atom transfer radical polymerization (ATRP). The azobenzene content in these copolymers ranges from 52 to 7 wt %. For an azo content down to 20% they exhibit a LC behavior similar to that of the azo homopolymers. Thin films of these copolymers were characterized by transmission electron microscopy (TEM). A lamellar nanostructure was observed for azo content down to 20 wt %, while no structure is observed for the copolymer with a 7% azo content. The optical anisotropy induced in these films by illumination with linearly polarized 488 nm light was studied and the results compared with those of the azo homopolymer and of a random copolymer with a similar composition. The formation of azo aggregates inside the azo blocks is strongly reduced in going from the homopolymer to the copolymers. Photoinduced azo orientation perpendicular to the 488 nm light polarization was found in all the polymers. The orientational order parameter is very similar in the homopolymer and in the block copolymers with an azo content down to 20 wt %, while it is much lower in the random copolymer and in the 7 wt %. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1899–1910, 2007     

Synthesis and properties of comb polymers with semirigid mesogen‐jacketed polymers as side chains

A series of novel comb polymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐g‐polystyrene (PMPCS‐g‐PS), with mesogen‐jacketed rigid side chains were synthesized by the “grafting onto” method from α‐yne‐terminated PMPCS (side chain) and poly(vinylbenzyl azide) (backbone) by Cu(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. The α‐yne‐terminated PMPCS was synthesized by Cu(I)‐catalyzed atom transfer radical polymerization initiated by a yne‐functional initiator. Poly(vinylbenzyl azide) was prepared by polymerizing vinylbenzyl chloride using nitroxide mediated radical polymerization to obtain poly(vinylbenzyl chloride) as the precursor which was then converted to the azide derivative. The chemical structure and architectures of PMPCS comb polymers were confirmed by ¹H NMR, gel permeation chromatography, and multiangle laser light scattering. Both surface morphologies and solution behaviors were investigated. Surface morphologies of PMPCS combs on different surfaces were investigated by scanning probe microscopy. PMPCS combs showed different aggregation morphologies when depositing on silicon wafers with/without chemical modification. The PMPCS comb polymers transferred to polymer‐modified silicon wafers using the Langmuir‐Blodgett technique showed a worm‐like chain conformation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012