Nickel(II) α‐Diimine Catalyst for Grignard Metathesis (GRIM) Polymerization

A nickel α‐diimine catalyst was used for Grignard metathesis (GRIM) polymerization of 2,5‐dibromo 3‐hexylthiophene and 2‐bromo‐5‐iodo‐3‐hexylthiophene monomers. GRIM polymerization of 2‐bromo‐5‐iodo‐3‐hexylthiophene generated regioregular polymers with molecular weights ranging from 3 000 to 12 000 g · mol⁻¹. The nickel α‐diimine catalyst was also successfully used for the GRIM polymerization of a bulky benzodithiophene monomer.

     

Synthesis of Comb Tri‐ and Tetrablock Copolymers Catalyzed by the Grubbs First Generation Catalyst

High molecular weight tri‐ and tetrablock copolymers were synthesized from the commercially available Grubbs first generation catalyst for the first time. These polymers had degrees of polymerization from 430 to 1 100, molecular weights up to 419 000 g · mol⁻¹, and narrow polydispersities. Oxanorbornene monomers were chosen due to their fast rates of polymerization and slow rates of cross metathesis. Polystyrene arms were grown from selected blocks by atom transfer radical polymerization to yield architecturally complex comb tri‐ and tetrablock copolymers. These polymers self‐assembled in the solid state into ordered morphologies that were characterized by scanning electron microscopy.

     

Entanglement Transition in Hyperbranched Polyether‐Polyols

Are hyperbranched polymers capable of forming entanglements? This is the central issue of this contribution. Hyperbranched polyglycerol (hbPG) samples with different molecular weights (600–106 000 g · mol⁻¹), narrow polydispersities (1.2–1.8) and high degrees of branching (≈0.6) were prepared by anionic ring‐opening polymerization. The viscoelastic properties of these polymers with respect to molecular architecture and molar mass were investigated. At low molecular weights “classical” scaling behavior between zero shear viscosity and molecular weight can be observed, whereas between 3 000 and 10 000 g · mol⁻¹ a plateau‐like area is found. The results indicate entanglement dynamics when exceeding a critical molar mass ( ≈ 20 000 g · mol⁻¹) due to entangled hyperbranched polyglycerols.

     

Synthesis of PEDOT Nanoparticles and Vesicles by Dispersion Polymerization in Alcoholic Media

Summary: The synthesis of PEDOT nanoparticles and vesicles by dispersion polymerization in a methanol/water mixture (3/2, v/v) is reported, using either ammonium persulfate or iron(III) p‐toluenesulfonate as oxidants and α‐EDOT‐PEO as a reactive stabilizer. The influence of the oxidant as well as the α‐EDOT‐PEO molar mass and concentration on the core‐shell particle morphology and conductivity properties have been investigated. PEDOT particles with conductivities up to 1.5 × 10⁻² S · cm⁻¹ have been obtained in high yield.

TEM image of PEDOT vesicles prepared using PEO‐based stabilizers of 25 000 g · mol⁻¹ in water/methanol mixture (2:3 v/v) at room temperature using ammonium persulfate as an oxidant.     

Silica‐Polymethacrylate Hybrid Particles Synthesized Using High‐Pressure Atom Transfer Radical Polymerization

Hybrid nanoparticles with a silica core and grafted poly(methyl methacrylate) (PMMA) or poly(n‐butyl methacrylate) (PBMA) chains were prepared via activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP) at room temperature under high pressure. Due to enhanced propagation rate constant and reduced termination rate constant for polymerizations conducted under high pressure, the rate of polymerization was increased, while preserving good control over polymerization when compared to ATRP under ambient pressure. Molecular weights of greater than 1 million were obtained. The PMMA and PBMA brushes exhibited “semi‐diluted” or “diluted” brush architecture with the highest grafting densities ≈0.3 chain·nm⁻².

     

Polyurethanes Containing Indole‐Based Non‐Linear Optical Chromophores: from Linear Chromophore to H‐Type

Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.

     

Azide/Alkyne‐“Click”‐Reactions of Encapsulated Reagents: Toward Self‐Healing Materials

The successful encapsulation of reactive components for the azide/alkyne‐“click”‐reaction is reported featuring for the first time the use of a liquid polymer as reactive component. A liquid, azido‐telechelic three‐arm star poly(isobutylene) ( = 3900 g · mol⁻¹) as well as trivalent alkynes were encapsulated into micron‐sized capsules and embedded into a polymer‐matrix (high‐molecular weight poly(isobutylene), = 250 000 g · mol⁻¹). Using (Cu^IBr(PPh₃)₃) as catalyst for the azide/alkyne‐“click”‐reaction, crosslinking of the two components at 40 °C is observed within 380 min and as fast as 10 min at 80 °C. Significant recovery of the tensile storage modulus was observed in a material containing 10 wt.‐% and accordingly 5 wt.‐% capsules including the reactive components within 5 d at room temperature, thus proving a new concept for materials with self‐healing properties.

     

Introducing a Flat Model of the Silica‐Supported Bis(imino)pyridyl Iron(II) Polyolefin Catalyst

Summary: A well‐defined flat model of a supported homogeneous polyolefin catalyst is prepared on the basis of an immobilized bis(imino)pyridyl iron complex on a super flat silica surface. The amount of supported catalyst precursor is quantified using XPS. This model catalyst remains active over extended periods, i.e., an average activity of 0.25 × 10³ kg PE · (mol_Cat · h · bar)⁻¹ is obtained for 24 h of ethylene polymerization. The morphology of the nascent polyethylene film is investigated by SEM.

A side‐view SEM image of the PE produced from the supported bis(imino)pyridyl Fe catalyst.     

Microwave‐Assisted Ring‐Opening Polymerization of ε‐Caprolactone in the Presence of Ionic Liquid

Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol⁻¹ is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.

     

Preparation of Clickable Poly(3‐hydroxyalkanoate) (PHA): Application to Poly(ethylene glycol) (PEG) Graft Copolymers Synthesis

A new synthesis of amphiphilic biodegradable copolymers consisting of hydrophobic poly(3‐hydroxyalkanoate) (PHA) backbone and hydrophilic poly(ethylene glycol) (PEG) units as side chains is described. Poly[(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate)] (PHOU) was first methanolyzed and its unsaturated side chains were quantitatively oxidized to carboxylic acid. Esterification with propargyl alcohol led to an alkyne‐containing “clickable” PHA in 71% conversion. Its reactivity was successfully demonstrated by grafting azide‐terminated PEG chains of 550 and 5 000 g · mol⁻¹, respectively. All products were fully characterized using GPC, ¹H, and COSY NMR.

     

Conjugated Microporous Networks on the Basis of 2,3,5,6‐Tetraarylated Diketopyrrolo[3,4‐c]pyrrole

π‐Conjugated microporous networks have been prepared from the tetraarylated diketopyrrolo[3,4‐c]pyrrole unit as a tetrafunctional building block. The reactions are carried out using microwave‐assisted Yamamoto or Sonogashira cross‐coupling. Red insoluble powders are obtained, showing intense fluorescence. The polymer networks exhibit a high gas storage capability, with BET surface areas up to about 500 m² · g⁻¹.

     

Click Polyester: Synthesis of Polyesters Containing Triazole Units in the Main Chain by Click Chemistry and Improved Thermal Property

A “click” polymerization of dialkynes that contain an ester linkages and diazides to has been performed to synthesize various polyesters, termed “click polyesters” with a high of 1.0 × 10⁴ to 7.0 × 10⁴ in an excellent yield. This polymerization accompanied a formation of 1,4‐disubstituted triazoles in the polyester main chain by a Cu^I catalyst. The triazole ring formation in the polyester main chain leads to improved thermal properties and enhancement of the even–odd effect of methylene chain length of the produced click polyesters. This report is the first report of the application of click chemistry to synthesize a series of polyesters under mild conditions.

     

Post‐Synthesis Functionalization of (Meth)acrylate Based Monoliths via Electron Beam Triggered Graft Polymerization

Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g⁻¹ and 1.5 mg · g⁻¹. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.

     

Controlled Radical Ab Initio Emulsion Polymerization of n‐Butyl Acrylate by Reverse Iodine Transfer Polymerization (RITP): Effect of the Hydrolytic Disproportionation of Iodine

Summary: Controlled radical polymerization of n‐butyl acrylate by reverse iodine transfer polymerization (RITP) was achieved in ab initio emulsion polymerization to yield a stable and uncolored latex (particle diameter d_p = 106 nm). Hydrolysis of iodine, I₂, was responsible for an upward deviation from the targeted molecular weight = 10 400 g · mol⁻¹. The iodide concentration [I⁻] was followed by an iodide selective electrode and the amount of efficient iodine (33%) was successfully correlated with the experimental molecular weight = 31 000 g · mol⁻¹. Finally, a simplified mechanism of RITP in ab initio emulsion polymerization taking into account the iodine hydrolysis was proposed.

Evolution of molecular weight and polydispersity index in RITP of BuA in ab initio emulsion.     

One‐Pot Synthesis of Well‐Defined Amphiphilic and Adaptative Block Copolymers via Versatile Combination of “Click” Chemistry and ATRP

Well‐defined amphiphilic PCL‐b‐PDMAEMA block copolymers were successfully synthesized by a combination of ATRP and “click” chemistry following either a commutative two‐step procedure or a straightforward one‐pot process using CuBr · 3Bpy as the sole catalyst. Compared to the traditional coupling method, combining ATRP and click chemistry even in a “one‐pot” process allows the preparation of PCL‐b‐PDMAEMA diblock copolymers characterized by a narrow molecular weight distribution and quantitative conversion of azides and alkynes into triazole functions. Moreover, the amphiphilic character of these copolymers was demonstrated by surface tension measurements and critical micellization concentration was calculated.

     

Polymer Brushes by Nitroxide‐Mediated Polymerization

This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.

     

Dendritic Carrier Based on PEG: Design and Degradation of Acid‐sensitive Dendrimer‐like Poly(ethylene oxide)s

Degradable dendrimer‐like PEOs were designed using an original ABC‐type branching agent featuring a cleavable ketal group, following an iterative divergent approach based on the anionic ring opening polymerization (AROP) of ethylene oxide and arborization of PEO chain ends. A seventh generation dendrimer‐like PEO carrying 192 peripheral hydroxyls and exhibiting a molar mass of 446 kg · mol⁻¹ was obtained in this way. The chemical degradation of these dendritic scaffolds was next successfully accomplished under acidic conditions, forming linear PEO chains of low molar mass (≈2 kg · mol⁻¹), as monitored by ¹H NMR, SEC, and MALDI‐TOF mass spectrometry as well as by AFM.

     

A Green Approach for the Synthesis and Thiol‐ene Modification of Alkene Functio1489lized Poly(2‐oxazoline)s

The bulk polymerization of 2‐(dec‐9‐enyl)‐2‐oxazoline ( DecEnOx ), a fatty acid‐based monomer for the cationic ring‐opening polymerization, is reported. Furthermore, under optimal conditions, namely microwave heating at 100 °C, the bulk copolymerization with 2‐ethyl‐2‐oxazoline yielded well‐defined copolymers. Due to its pendant alkene groups DecEnOx ‐based polymers possess the potential to be modified in efficient thiol‐ene reactions. The functionalization with thiols, e.g., dodecanethiol and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glycopyranose in “green” solvents is demonstrated.

     

Rapid Ring‐Opening Polymerization of D,L‐Lactide by Microwaves

Summary: Poly(D ,L ‐lactide) with a molar mass of 10⁵ g · mol⁻¹ and a yield over 90% was produced in 10 min by the ring‐opening polymerization of D ,L ‐lactide under microwave irradiation with forward power of 255 W. A degradation of the poly(D ,L ‐lactide) was also induced by microwaves with a power level over 340 W. The molar mass of poly(D ,L ‐lactide) was dependent upon the competition between the polymerization of D ,L ‐lactide and the degradation of the resulting polymer.

Profiles of molar mass versus microwave irradiation time (1.8 g DLLA, 0.1% Sn(Oct)₂).     

Synthesis of Seven-Arm Poly(vinyl pyrrolidone) Star Polymers with Lysozyme Core Prepared by MADIX/RAFT Polymerization

A poly(vinyl pyrrolidone) (PVP) seven-arms star polymer with lysozyme core was synthesized by conjugating linear N-succinimidyl ester terminated PVP polymer to lysozyme. Reactive PVP polymers were synthesized using a MADIX/RAFT agent functionalized with N-succinimidyl ester. The polymerization of N-vinyl pyrrolidone proceeded in a living fashion up to more than 90% conversion reaching molecular weight of up to 33 000 g · mol⁻¹ with narrow molecular weight distributions. The PVP polymer was conjugated to lysozyme resulting in the attachment of seven PVP polymers to one lysozyme core. While the reaction was found to be complete when using low-molecular weight PVP, some by-products with less than seven arms were observed when using PVP with a molecular weight of 33 000 g · mol⁻¹.