Summary: The polylactide‐based nano‐composites were prepared via melt extrusion method using different types of intercalants and nano‐fillers having different surface charge density. In order to understand the direct polymer melt intercalation into the nano‐galleries, the interdigitated layer structure of the organically modified layered filler (OMLF), where the intercalants are oriented with some inclination to the host layer in the interlayer space, was proposed. After polymer melt intercalation, the smaller initial interlayer opening led to the larger interlayer expansion, suggesting the large amount of the intercalation of the polymer chains. Consequently, the nano‐composite exhibited finer dispersion of the nano‐fillers when compared with the nano‐composites prepared from OMLFs with larger initial interlayer opening.
Illustration of a model of interlayer structure of the qC14(OH) in gallery space of HTO. 相似文献
The synthesis of water soluble star‐block copolypeptides and their encapsulation properties are described. The star‐block copolypeptides, obtained by ring‐opening polymerization of amino acid N‐carboxyanhydrides, consist of a PEI core, a hydrophobic polyphenylalanine or polyleucine inner shell, and a negatively charged polyglutamate outer shell. The encapsulation study showed that these water soluble, amphiphilic star‐block copolypeptides could simultaneously encapsulate versatile compounds ranging from hydrophobic to anionic and cationic hydrophilic guest molecules.
Summary: Poly(vinyl acetate) chains end‐capped by a Co(acac)2 complex [PVAc‐Co(acac)2] were prepared by bulk cobalt‐mediated radical polymerization (CMRP) of vinyl acetate and used for grafting fullerene (C60) with four PVAc arms at low temperature (30 °C). A photoactive water‐soluble poly(vinyl alcohol)/C60 nanohybrid was then prepared by hydrolysis of the PVAc arms of the nanohybrid. Because of photoactivity and very low cytotoxicity, this type of water‐soluble nanohybrid is very promising for the photodynamic cancer therapy.
Strategy for the preparation of PVAc/C60 nanohybrid and hydrolysis of PVAc/C60 nanohybrid into PVOH/C60 nanohybrid. 相似文献
Amphiphilic star‐shaped oligo(ethylene glycol)s with a hydrophobic bile acid core and varying number of hydrophilic arms have been made. Their thermal behavior in aqueous solutions depends on the number rather than the length of the arms. The two‐armed lithocholate derivative showed the strongest tendency for association and exhibited the lowest cloud point (79 °C) of the oligomers made, as well as another phase separation at a lower temperature (31 °C). The “double thermosensitivity” arising both from the salt‐dependent LCST of the oligo(ethylene glycol) segments and the temperature‐responsive self‐assembly of amphiphilic bile acid derivative provides an interesting path in the design of bile acid‐based smart materials.
Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.
The preparation of polypyrrole/Fe3O4 nanospheres by a facile mini‐emulsion polymerization method is investigated using poly(ethylene glycol), poly(ethylene oxide), poly(vinyl alcohol), and hyaluronic acid as surfactants. Hyaluronic acid is deemed the most suitable surfactant since it results in well‐dispersed nanospheres of 80–100 nm, and offers the advantages of biocompatibility, cell adhesive property, and the availability of functional groups for attachment of other molecules. These polypyrrole/Fe3O4 nanospheres are magnetic and can be further functionalized with a cancer antibody, herceptin. Our results show that this combination of hyaluronic acid and herceptin results in high specific uptake of the nanospheres by cancer cells.
A continuum model is developed to investigate the microstructure‐dependent AC properties of MWCNT/polymer nanocomposites. The AC conductivity of the composite is increased by a higher curl ratio of MWCNTs. At a critical frequency ω0, the AC conductivity switches to a frequency‐dependent region. For high MWCNT content, the curl curliness of MWCNTs has only a weak influence on the AC conductivity. For medium MWCNT content, the AC conductivity became frequency‐dependent for low frequencies with decreasing curl ratio of MWCNTs, which cannot be explained by correlation length theory. An interpretation based on the linear circuit theory is given. With increasing size of MWCNT clusters, the critical frequency ω0 increases. It is also affected significantly by the crystallinity the polymer.
A method to prepare shape‐changing nanospheres from liquid crystalline elastomers is reported. The nanosized colloids are prepared by a miniemulsion process. During this process, colloids are prepared from a liquid crystalline (LC) main‐chain polyester and subsequently crosslinked into a nanometer‐sized LC elastomer. The ability of these LC elastomers to change their shape at the phase transition temperature from the smectic A to the isotropic phase was detected by temperature‐dependent transmission electron microscopy. The phase transition‐induced shape change leads to strongly shape anisotropic nanosized elastomer particles.
A theory of mechanical behaviour of the magneto‐sensitive elastomers is developed in the framework of a linear elasticity approach. Using a regular rectangular lattice model, different spatial distributions of magnetic particles within a polymer matrix are considered: isotropic, chain‐like and plane‐like. It is shown that interaction between the magnetic particles results in the contraction of an elastomer along the homogeneous magnetic field. With increasing magnetic field the shear modulus, G, for the shear deformation perpendicular to the magnetic field increases for all spatial distributions of magnetic particles. At the same time, with increasing magnetic field the Young's modulus, E, for tensile deformation along the magnetic field decreases for both chain‐like and isotropic distributions of magnetic particles and increases for the plane‐like distribution of magnetic particles.
Summary: We report a new method for the preparation of polyaniline nanoballs by using HAuCl4 as an oxidizing agent. During the reaction, aniline is oxidized and forms polyaniline whilst the hydrogen tetrachloroaurate is reduced and forms gold nanoparticles. These gold nanoparticles are found to decorate the nanoballs.
The resultant precipitate and corresponding TEM image of the gold‐nanoparticle covered polyaniline nanoball. 相似文献
The effect of the molar volume on the mechanical properties of three polymers is computed using molecular mechanics. It is demonstrated that elastic properties significantly depend on the molar volume. To be reproducible they must be determined for a series of “stable” glassy configurations for which the potential energy is minimized not only according to the coordinates but also to the molar volume. If these conditions are not fulfilled, a great disparity in values between experiment and simulation is observed. The procedure is first applied to PVC. It is then argued that coherent results stemming from the application of this approach to both tacticities of PMMA justifies its application toward other polymers.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
A new donor–acceptor polymer based on 9,9‐dioctylfluorene is synthesized and tested in organic photovoltaic devices. Results show that the polymer exhibits good solubility in a range of organic solvents and has a high hole mobility. When blended with a PC70BM acceptor and fabricated into a bulk heterojunction, photovoltaic devices having a maximum power conversion efficiency (PCE) of 6.2% and a peak external quantum efficiency of 74% are created. Such efficiencies are realized without any necessity for solvent additives or thermal annealing protocols.
A new approach for the synthesis of polyaniline (PANI) nanostructures under UV light illumination has been developed, which is the first report of a templateless chemical process for preparing pure PANI nanowires. The acceleration effect of photo‐assistance on the polymerization can promote the homogeneous nucleation and elongation of the nanofibers and nanowires, leading to easy preparation of tunable diameters of the nanowires and nanofibers of PANI.
Summary: Bisphenol A solid epoxy serves as an effective reaction compatibilizer to the bisphenol A polycarbonate (PC)/PMMA bilayer systems. Addition of epoxy to the bottom PMMA layer can retard or even prevent the dewetting of PC films by introducing crosslinking between both components at the interface. This is the first investigation of polymer bilayers stabilized by chemical reactions.
AFM topographic image of a representative dewetting hole. 相似文献
