Development of Nanodomain and Fractal Morphologies in Solvent Annealed Block Copolymer Thin Films

We have systematically studied the thin film morphologies of asymmetric polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) diblock copolymer subjected to solvent vapors of varying selectivity for the constituent blocks. Upon a short treatment in neutral or PS‐selective vapor, the film exhibited a highly ordered array of hexagonally packed, cylindrical microdomains. In the case of PEO selective vapor annealing, such ordered cylindrical microdomains were not obtained. Instead, fractal patterns on the microscale were observed and their growth processes investigated. Furthermore, hierarchical structures could be obtained if the fractal pattern was exposed to neutral or PS selective vapor.

     

Fabrication of Au/Titania Composite Nanodot Arrays from Au‐Loaded Block Copolymer Micellar Films

Summary: A simple route to an ordered array of metal/semiconductor oxide composite nanodots is presented. Micellar monolayer films of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) loaded with HAuCl₄ in the P2VP nanodomains are used as templates. TiO₂ is generated selectively within the polar P2VP domains of PS‐b‐P2VP/HAuCl₄ films by chemical vapor deposition of TiCl₄. Subsequent removal of the organic matrix by oxygen plasma or UV light leads to an array of Au/TiO₂ composite nanoparticles on the substrate surface.

Schematic illustration of the process to fabricate an array of Au/titania composite nanodots.     

Diameter‐Dependence of the Morphology of PS‐b‐PMMA Nanorods Confined Within Ordered Porous Alumina Templates

Summary: Polystyrene‐block‐poly(methyl methacrylate) nanorods were prepared by wetting ordered porous alumina templates. We systematically investigated the diameter‐dependence of their morphologies by varying the pore diameters of the templates from 400 nm down to 25 nm. If the pore diameter exceeds the period of the block copolymer, the pores accommodate a non‐integer number of repeat periods. In case of smaller pores the occurrence of an ordered state could not be unambiguously verified.

TEM image of an ultra‐thin slice containing a cross‐section of a polystyrene‐block‐poly(methyl methacrylate) nanorod embedded in epoxy resin.     

Electromechanical Response of Nanostructured Polymer Systems with no Mechanical Pre‐Strain

A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.

     

Ring and Disk‐Like CdSe Nanoparticles Stabilized with Copolymers

CdSe nanoparticles stabilized with the amphiphilic diblock copolymer polystyrene‐block‐poly(4‐vinylpyridine) were spread from toluene dispersion on the water surface. Monolayers could be transferred onto solid substrates using the Langmuir‐Blodgett technique. By means of atomic force and scanning electron microscopy highly symmetric ring and disk‐like structures with diameters ranging between 150 nm and 1200 nm were observed.

AFM image of a mixed monolayer of copolymer 12 and CdSe nanoparticles stabilized with polystyrene‐block‐poly(4‐vinylpyridine).     

Nanoporous Network Channels from Self‐Assembled Triblock Copolymer Supramolecules

Supramolecular complexes of a poly(tert‐butoxystyrene)‐block‐polystyrene‐block‐poly(4‐vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self‐assemble into a core–shell gyroid morphology with the core channels formed by the hydrogen‐bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well‐ordered nanoporous films that were used as templates for nickel plating.

     

Synthesis of Well‐Defined Rod‐Coil‐Rod Polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate via One‐Pot Anionic Polymerization

A rod‐coil‐rod block copolymer, polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate, of controlled molecular weight was synthesized quantitatively via living anionic polymerization using potassium naphthalenide in the presence of sodium tetraphenylborate. The use of K⁺ as the counterion for the polymerization of styrene, and Na⁺ (NaBPh₄) for the polymerization of isocyanate leads to the formation of a well‐controlled novel triblock copolymer.

     

Control of SWNT Dispersion by Block Copolymers with a Side‐Chain Polarity Modifier

The dispersion of single‐walled carbon nanotubes (SWNTs) in a non‐polar solvent is controlled with a series of polystyrene‐block‐polybutadiene‐block‐polystyrene (PSBS) block copolymers that contain cholesteryl chloroformate (CC) in side‐chains. Esterification of CC with the partially hydroxylated polybutadiene (PB) blocks allows one to tune the polarity of the block copolymers, which decreases with the amount of CC attached. An excellent dispersion of weak polar SWNTs is observed with PSBS that contains a partially hydroxylated PB block. The dispersion is then significantly deteriorated when the amount of non‐polar CC moieties increases in the block copolymers. A good dispersion is achieved with a polymer that gives rise to strong SWNT–polymer interactions, which ensures contact of the polymer molecules with the nanotube surface, rather than a good solubility of the polymer dispersant in solvent. The stability of the SWNTs in solution arises from unique needle‐like nanowires of the block copolymer aligned perpendicular to the nanotube axis.

     

Self‐Assembling Nanomaterials using Magnetic Nanoparticles Modified with Polystyrene Brushes

Magnetic nanomaterials have been studied in order to generate novel nanocomposites that display both the magnetic properties of the nanoparticles and the ability to self‐assemble of the amorphous block copolymer matrix. Towards this goal, iron oxide magnetic nanoparticles have been modified with PS brushes by ATRP in order to improve both the dispersion and the affinity of the nanoparticles with one of the blocks of a polystyrene‐block‐polybutadiene‐block‐polystyrene block copolymer. This method of preparation of nanocomposites opens new strategies for the generation of magnetic nanomaterials. The samples are characterized using DSC and atomic and magnetic force microscopies.

     

pH/Thermosensitive Hydrogels Formed at Low pH by a PMMA‐PAA‐P2VP‐PAA‐PMMA Pentablock Terpolymer

A poly(methyl methacrylate)‐block‐poly(acrylic acid)‐block‐poly(2‐vinyl pyridine)‐block‐poly(acrylic acid)‐block‐poly(methyl methacrylate) (PMMA‐PAA‐P2VP‐PAA‐PMMA), pentablock terpolymer has been synthesized by anionic polymerization with sequential addition of monomers and studied in aqueous media at low pH. The system exhibits combined properties and adopts the behavior of ‘telechelic’ polyelectrolytes and that of double hydrophilic polyampholytes. This complex behavior leads to the pentablock terpolymer forming a pH and temperature sensitive reversible hydrogel at very low polymer concentration.

     

Insertion of Copper(II)/Schiff‐Base Complexes with NLO Properties into Commercial Polycarbonates by Thermal Processes

The preparation of a bisphenol‐A carbonate copolymer, containing Cu‐diimine units with nonlinear optical (NLO) properties, and its MALDI‐TOF mass spectrometric characterization are reported. Contrary to the usual synthetic method, NLO groups were inserted directly into a commercial polycarbonate by prolonged heating at 250 °C. This innovative procedure allows to obtain a Cu/diimine‐containing polymer of high molecular weight.

     

Synthesis and Self‐Assembly of Amphiphilic Diblock Copolymers using a Fluorescently Labeled N‐Alkoxyamine Initiator

Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.

     

Patterning Surfaces for Controlled Platelet Adhesion and Detection of Dysfunctional Platelets

Platelets play a fundamental role in thrombus formation and in the pathogenesis of arterial thrombosis. Patterning surfaces for controlled platelet adhesion paves the way for adhesion and activation mechanisms in platelets and detection of platelet functional defects. Here, a new and simple method based on controlled polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) on the surface of styrene‐block‐(ethylene‐co‐butylene)‐block‐styrene (SEBS) is shown. The competition between polymerization and degradation enables platelet adhesion on SEBS to be switched on and off. The adhesive sites of the platelets can be down to single cell level, and the dysfunctional platelets can be quantitatively detected.

     

Water‐Soluble Carbon Nanotubes by Redox Radical Polymerization

Water‐soluble single‐ and multi‐walled carbon nanotubes (CNTs) were prepared by grafting polyacrylamide chains from the graphitic surface via ceric ion‐induced redox radical polymerization. The reducing functionalities were covalently attached to the tubes by peroxide‐assisted radical reaction. The results showed that polymer chains were grafted onto CNTs by the redox process. The redox radical polymerization initiated by carbon nanotube‐bearing functionalities not only provides a powerful strategy for modifying the carbon nanostructures but also gives us the knowledge of their sidewall chemistry.

     

Microstructurally Controlled Polyisoprene or Polystyrene Diblock Copolymers of rac‐Lactide

Summary: A series of new polyisoprene‐block‐polylactide and polystyrene‐block‐polylactide diblock copolymers was prepared by combining the living anionic polymerization of isoprene or styrene, and the stereoselective ring‐opening polymerization of rac‐lactide. Aluminum and yttrium‐based polystyrene or polyisoprene macroinitiators yielded isotactic‐stereoblock and heterotactic‐enriched polylactide segments, respectively. A strong influence of the microstructure of the polylactide block on the aggregation properties in solution and morphological behavior of the solid materials in thin films has been observed.

General strategy used for the preparation of the diblock copolymers, illustrated here for poly(isoprene‐block‐lactide). Poly(styrene‐block‐lactide) copolymers were prepared similarly.     

Microphase‐Separated Brushes on Square Platelets in PS‐b‐PEO Thin Films

In polystyrene‐block‐poly(ethylene oxide) thin films, microphase‐separated brushes on the square platelets can be obtained via fast solvent evaporation by controlling the tethering density (0.08 < σ < 0.11). The tethering density of the brushes is proportional to the thickness of the PEO crystal and increases with increasing initial solution heating temperature (T_i). When T_i < T_m, where T_m is the melting point of PEO, brushes with microphase‐separated structures are observed. The formation of microphase‐separated brushes depends on two factors: the strong incompatibility between PS and noncrystalline PEO chains (attached to the crystalline PEO) and the weak interaction between PS‐PS brushes.

     

Micelles‐Encapsulated Microcapsules for Sequential Loading of Hydrophobic and Water‐Soluble Drugs

Layer‐by‐layer (LbL) assembly was conducted on CaCO₃ microparticles pre‐doped with polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles, and resulted in micelles encapsulation in the microcapsules after core removal. Distribution of the micelles in the templates and capsules was characterized by transmission electron microscopy and confocal laser scanning microscopy. The micelles inside the capsules connected with each other to form a chain and network‐like structure with a higher density near the capsule walls. The hydrophobic PS cores were then able to load small uncharged hydrophobic drugs while the negatively charged PAA corona could induce spontaneous deposition of water‐soluble positively charged drugs such as doxorubicin.

     

Preparation of Size Controllable Polypyrrole Sub‐Microcapsules Using SEBS Copolymer as the Building Block

Summary: SEBS is used as building blocks to fabricate size controllable polypyrrole (PPy) capsules. Polypyrrole shells grow on the surfaces of the size controllable oxidant sub‐microparticles dispersed in the solution cast film of a SEBS copolymer by vapor phase polymerization. After washing in ethanol, PPy sub‐microcapsules dispersed in a SEBS matrix are obtained. This technique shows advantages of lower cost and less pollution, as compared with the gold‐template method reported in the literature.

A TEM image of polypyrrole sub‐microcapsules dispersed in a SEBS matrix.     

Coarse‐Grained Simulations of Model Polymer Nanofibres

We describe the development of a coarse‐grained (CG) force field for nylon‐6 (polycaprolactam) and its application to the simulation of the structure and macromolecular dynamics within cylindrical fibres formed by this polymer, having diameters in the 14–28 nm range. Our CG model is based on the MARTINI force field for the non‐bonded interactions and on Boltzmann‐inverted gas‐phase atomistic simulations for intramolecular stretching and bending energies. The simulations are carried out on infinite, isolated nanofibres at temperatures of 300, 400 and 500 K, with different starting configurations. Starting from ordered chain‐extended configurations, we simulate the melting of the polymer in the nanofibres and, after cooling back to room temperature, its re‐crystallization in a chain‐folded lamellar configuration. This agrees with experimental observations on electrospun nylon‐6 nanofibres and demonstrated the suitability of the approach for the simulation of these systems. The effect of nanoscale confinement on the structure and dynamics of the polymer chains is extensively discussed.

     

3D Nanometer‐Scale Study of Coexisting Bicontinuous Morphologies in a Block Copolymer/Homopolymer Blend

Summary: Coexisting bicontinuous morphologies, one ordered and one disordered, are investigated in a macrophase‐separated poly(styrene‐block‐isoprene) diblock copolymer/homopolystyrene (SI/hS) blend. Two‐phase behavior is attributed to the relatively high hS/S mass ratio (0.92). According to its crystallographic signature and channel coordination as discerned from three‐dimensional (3D) images generated by transmission electron microtomography (TEMT), the ordered morphology is classified as gyroid. The 3D local and global topological characteristics of both bicontinuous morphologies as measured directly from TEMT images are reported. The disordered morphology is further compared with molecular‐field simulations to ascertain the spatial distribution of the constituent species within the blend, thereby demonstrating the utility of high‐resolution 3D imaging coupled with molecular‐level simulations.