Effect of Cryostructuring Treatment on Some Properties of Xanthan and Karaya Cryogels for Food Applications

Cryogels are novel materials because the manufacturing process known as cryostructuring allows biopolymers to change their properties as a result of repeated controlled freeze–thaw cycles. Hydrogels of xanthan and karaya gums were evaluated after undergoing up to four controlled freeze–thaw cycles in indirect contact with liquid nitrogen (up to −150 °C) to form cryogels. Changes in structural, molecular, rheological, and thermal properties were evaluated and compared to those of their respective hydrogels. Samples were also analyzed by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR), Rotational Rheology (RR), Modulated Differential Scanning Calorimetry (MDSC) and zeta potential (ζ). In general, significant differences (p < 0.05) between the numbers of freeze–thaw cycles were found. Karaya cryogels were not stable to repeated cycles of cryostructuring such as the three-cycle xanthan cryogel, which has the best structural order (95.55%), molecular interactions, and thermal stability, which allows the generation of a novel material with improved thermal and structural properties that can be used as an alternative in food preservation.     

Characterization of different double-emulsion formulations based on food-grade emulsifiers and stabilizers

This study focused on the preparation and characterization of water-in-oil-in-water (W1/O/W2)-type double emulsions designed by food-grade emulsifiers and stabilizers. The primary objective of this study was to compare different emulsion formulations in terms of droplet size, rheology, and stability and to reduce the amount of polyglycerol poliricinoleate (PGPR). To achieve these goals, PGPR and a PGPR–lecithin blend were utilized in the formation of the primary phase (W1/O), while varying concentrations of guar gum (GG) and gum tragacanth (GT) incorporated in the secondary water phase (W2). Shear thinning behavior was observed for all emulsion formulations. Sauter mean diameters of the emulsions prepared with PGPR as a hydrophobic emulsifier ranged between 30?µm and 75?µm, while those prepared with the PGPR–lecithin blend varied between 25?µm and 85?µm based on the first day’s measurements. In emulsions with the PGPR–lecithin blend, the smallest droplet size was obtained when the GG–GT blend was incorporated in the external aqueous phase. Moreover, GG–GT blends had high consistency coefficients and high apparent viscosity values. It was also observed that PGPR–lecithin containing emulsions were more stable.     

Macromolecular dimensions and mechanical properties of monolayer films of Sonorean mesquite gum

Mesquite gum sourced from Prosopis velutina trees and gum arabic (Acacia spp.) were characterized using light scattering and Langmuir isotherms. Both gum materials were fractionated by hydrophobic interaction chromatography, yielding four fractions for both gums: FI, FIIa, FIIb and FIII in mesquite gum and FI, FII, FIIIa and FIIIb in gum arabic. In mesquite gum, the obtained fractions had different protein content (7.18-38.60 wt.-%) and macromolecular dimensions (M approximately 3.89 x 10(5)-8.06 x 10(5) g.mol(-1), RG approximately 48.83-71.11 nm, RH approximately 9.61-24.06 nm) and architecture given by the structure factor (RG/RH ratio approximately 2.96-5.27). The mechanical properties of Langmuir monolayers at the air-water interface were very different on each gum and their fractions. For mesquite gum, the most active species at the interface were those comprised in Fractions IIa and IIb and III, while Fraction I the pi/A isotherm lied below that of the whole gum. In gum arabic only Fraction III developed greater surface pressure at the same surface per milligram of material than whole gum. This is rationalized in terms of structural differences in both materials. Mesquite gum tertiary structure seems to fit best with an elongated polydisperse macrocoil in agreement with the "twisted hairy rope" proposal for arabinogalactan proteoglycans.     

A Review on the Main Phytoconstituents,Traditional Uses,Inventions, and Patent Literature of Gum Arabic Emphasizing Acacia seyal

Acacia seyal is an important source of gum Arabic. The availability, traditional, medicinal, pharmaceutical, nutritional, and cosmetic applications of gum acacia have pronounced its high economic value and attracted global attention. In addition to summarizing the inventions/patents applications related to gum A. seyal, the present review highlights recent updates regarding its phytoconstituents. Traditional, cosmetic, pharmaceutical, and medicinal uses with the possible mechanism of actions have been also reviewed. The patent search revealed the identification of 30 patents/patent applications of A. seyal. The first patent related to A. seyal was published in 1892, which was related to its use in the prophylaxis/treatment of kidney and bladder affections. The use of A. seyal to treat cancer and osteoporosis has also been patented. Some inventions provided compositions and formulations containing A. seyal or its ingredients for pharmaceutical and medical applications. The inventions related to agricultural applications, food industry, cosmetics, quality control of gum Arabic, and isolation of some chemical constituents (L-rhamnose and arabinose) from A. seyal have also been summarized. The identification of only 30 patents/patent applications from 1892 to 15 November 2021 indicates a steadily growing interest and encourages developing more inventions related to A. seyal. The authors recommend exploring these opportunities for the benefit of society.     

The displacement efficiency and rheology of welan gum for enhanced heavy oil recovery

The displacement efficiency of welan gum on enhanced heavy oil recovery has been investigated by comparing that of xanthan gum which is commonly used for polymer flooding, and it is found that the displacement efficiency of biopolymer welan gum is higher (>7.0 % at the normal permeability) than that of xanthan gum. In‐depth rheological investigations show that both storage modulus and loss modulus of welan gum solution are higher than those of xanthan gum solutions at the same concentration, temperature and salinity. The higher displacement efficiency for enhanced heavy oil recovery by welan gum is mainly caused by its stronger ability to form aggregates. Although the molecular weight of welan gum is lower than that of xanthan gum, the aggregates of welan gum molecules help to improve the sweep efficiency. It is proposed that welan gum improves oil recovery by drawing and dragging on the residual oils which is derived from the interlinked network structures formed by the adjacent double helices in the arrangement of the zipper model. The intermolecular structures formed by zipper model are stable in high temperature and high salinity condition. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of Hydroxypropyl Guar Gum by Phase Transfer Catalysis

HGG (Hydroxypropyl guar gum) was synthesized by phase transfer catalysis for the first time. The effects of alkalinity, phase transfer catalyst, etherification, pH value, temperature,reaction time and stirring speed were investigated. An optimal synthetic reaction technology was established, namely, dose of guar gum is 100 g, propylene oxide 40-50 g, HTAC (hexadecyl trimethyl ammonium chloride ) 1.3-1.7 g, pH value 10-10.5, temperature 45-50~C, and reaction time 3-4 hours. The result shows that the improved HGG has high viscosity. Its dissolution speed, content of insoluble residue, colloid light transparency and stability are apparently superior to guar flour.     

The rheological and thickening properties of cationic xanthan gum

In the present study, cationic xanthan gum (CXG) was synthesized to enhance the rheological property of xanthan gum (XG) by attaching quaternary amine groups to the backbone of XG. The efficacy of the substitution was confirmed by FT-IR spectra and ¹³C NMR. The surface morphology was changed considerably as demonstrated by SEM. The examined rheological properties of XG and CXG include steady-state and dynamic rheological properties. The results show that quaternary amine groups are successfully grafted onto the XG molecule. Apparent viscosity, storage modulus, and loss modulus of CXG solutions are greater than those of XG solutions under the same conditions. It is moreover found that apparent viscosity and viscoelasticity increase with the degree of substitution. The data indicate that the modified XG has much better heat resistance.     

羟丙基瓜尔胶的制备及表征

瓜尔胶(guar gum)是一种天然半乳甘露聚糖,其水溶性和增稠性很好,广泛用做增稠剂、破乳剂等。原粉胶溶解较慢、水不溶物含量高、粘度不易控制,人们常利用化学手段改变其理化特性以满足实际工业生产需要,羟丙基化是有效的手段之一,但对羟丙基化的表征较为困难。S．     

Phase transition of locust bean gum-, tara gum- and guar gum-water systems

Phase transition behaviour of neutral galactomannans, i.e., locust bean gum (LBG), tara gum (Tara-G) and guar gum (GG)-water systems is investigated. In this study, water content {W_c=(gram of water)/(gram of dry sample)} of these systems was varied from 0.2 to 3.6 g g^-1. In the DSC heating curves, glass transition (T_g), cold crystallization (T_cc) and melting (T_m) were observed in all three samples. In addition, liquid crystal transition (T*) was observed in GG-water systems at a temperature higher than Tm. Using T_g, T_cc, Tm and T*, phase diagrams of each system were established. From the melting enthalpy of ice in the systems, three types of water, non-freezing water (W_nf), freezing bound water (W_fb) and free water were calculated. The maximum amount of Wnf was observed at Wc=0.7 g g-1, where Tg showed the lowest temperature. The amount of Wnf in LBG and GG is higher than that of Tara-G, whereas the highest amount of Wfb is found in GG. T* was only observed in GG-water systems. It is concluded that frequency of the side chains in the repeating unit of the main chains of these three galactomannan affects the frozen structure of the glassy state in the presence of water. This revised version was published online in July 2006 with corrections to the Cover Date.     

Improvement of the electrophoretic protein profiles of Leguminosae gums extracts using gamanase and application to the evaluation of carob-guar mixtures

A quantitative assay for guar gum in carob gum, based on the extraction of proteins in acetonitrile-water (7:3), separation by capillary electrophoresis and multiple linear regression (MLR) using the areas of nine selected peaks as predictors, was improved by performing the extraction in the presence of gamanase. In the absence of the enzyme, peak migration times and areas depended on the guar content, which complicated peak identification and evaluation. Manual correction of the migration times by comparison with standard electropherograms obtained with pure carob and carob-guar mixtures was required; however, when the proteins were extracted under sonication at 60 °C for 30 min in the presence of gamanase, the migration times and peak areas did not vary with the composition of the carob-guar mixtures, and its reproducibility improved largely. These effects were attributed to the reduction of the viscosity of the extracts and the removal of the galactomannose interactions with the proteins and the capillary walls. Peak identification and evaluation were easily and directly performed on these electropherograms without further processing. An MLR model constructed with 36 carob-guar mixtures containing up to 20% guar, and by measuring the areas of 12 selected peaks and using eight of them as predictors, yielded a detection limit of 2.8% guar (α=β=0.05 criterion). A model of similar quality was obtained by partial least-squares (PLS) regression.     

黄原胶水凝胶的分子网络模型

本文结合二次采油中作为压裂液的黄原胶水凝胶,从其成胶机理着手分析,以Carreau-Bird模型为基点,在分子网络模型中引进了吸附反应动力学项以及计及流体触变性质的函数f(t),并把自由链、迷向链及破碎网络对应力的贡献模拟成牛顿性,从而导出本构方程。方程中的参数值由凝胶的粘弹性性质及非线性物质函数决定,用有约束的优化方法进行优化后得到,模型计算的结果与实验数据大致相符。     

Rheokinetic study of gel-breaking process of xanthan gum solution

The dynamic rheological behavior of xanthan gum (XG) during the gel-breaking process was studied in this work. Both experimental and numerical simulations were adopted to investigate the effects of temperature and added salt on the gel-breaking process. The results showed that the gel-breaking reaction is slowed down by the added salt, while temperature has a positive influence on the chemical degradation of XG. The novel rheokinetics equations were established to describe the gel-breaking process of XG and the simulated values are in good agreement with experimental data. The changes of the model parameters with respect to temperature and added salt are consistent with the experimental results obtained with rheometer, which verifies the feasibility of the established rheokinetics equations for characterizing the gel-breaking reaction of XG.     

Viability of Biopolymers for Enhanced Oil Recovery

Xanthan gum and scleroglucan are assessed as environmentally friendly enhanced oil recovery (EOR) agents. Viscometric and interfacial tension measurements show that the polysaccharides exhibit favorable viscosifying performance, robust shear tolerance, electrolyte tolerance, and moderate interactions with surfactants. Non-ionic surfactants and anionic surfactants bind to xanthan gum and transform the backbone conformation from a strong helix to a more flexible structure, reducing the viscosifying efficacy of xanthan. In contrast, non-ionic surfactants and anionic surfactants bind to scleroglucan and increase the viscosifying efficacy by non-electrostatic interactions or imparted electrostatic effects. The two polysaccharides are technically viable as viscosifying agents in typical EOR injection fluid formulations.     

Impact of Adding Polysaccharides on the Stability of Egg Yolk/Fish Oil Emulsions under Accelerated Shelf-Life Conditions

Polysaccharides can form interfacial complexes with proteins to form emulsions with enhanced stability. We assessed the effect of adding gum guar or gum arabic to egg yolk/fish oil emulsions. The emulsions were produced using simple or high-pressure homogenization, stored for up to 10 days at 45 °C, and characterized for their particle size and distribution, viscosity, encapsulation efficiency, oxidative stability, and cytotoxicity. Emulsions containing gum guar and/or triglycerides had the highest viscosity. There was no significant difference in the encapsulation efficiency of emulsions regardless of the polysaccharide used. However, emulsions containing gum arabic displayed a bridging flocculation effect, resulting in less stability over time compared to those using gum guar. Emulsions produced using high-pressure homogenization displayed a narrower size distribution and higher stability. The formation of peroxides and propanal was lower in emulsions containing gum guar and was attributed to the surface oil. No significant toxicity toward Caco-2 cells was found from the emulsions over time. On the other hand, after 10 days of storage, nonencapsulated fish oil reduced the cell viability to about 80%. The results showed that gum guar can increase the particle stability of egg yolk/fish oil emulsions and decrease the oxidation rate of omega-3 fatty acids.     

黄原胶和瓜尔胶混合溶液及其硼砂交联体系的流变性能

本文研究了黄原胶(XG)和瓜尔胶(GG)的混合溶液及其硼砂(B)交联体系的流变性,考察了XG/GG间的“协同增效作用”以及溶液组成、pH和电解质(NaCl和CaCl 2)对其流变性的影响。结果表明,所有溶液体系均为假塑型流体,其流变曲线可用Herschel-Bulkley和Casson模型描述。XG和GG复配具有明显的“协同增粘效应”,在XG占两聚合物的质量分数w(XG)为20%和90%时协同增粘效应最强,其“协同增粘率”(R m)分别约为42%和34%。硼砂(B)可交联XG/GG混合溶液,其交联增粘效果随w(XG)的减小和硼砂质量浓度ρ(B)的增大而增大;在w(XG)=50%和ρ(B)=1.00 g/L时,“交联增粘率”可达85%。在所研究的pH值范围(6.2~10.0)内,XG/GG混合溶液的流变性基本无变化,而XG/GG/B交联体系(w(XG)=50%和ρ(B)=0.75~1.00 g/L)的表观粘度随pH值增大先升高后降低,pH=9.0时出现最大值,交联增粘率达107%。电解质可使XG/GG/B交联溶液(w(XG)=10%和ρ(B)=0.50 g/L)体系的粘度大幅下降,且CaCl 2的影响明显高于NaCl,表明交联结构的耐盐能力较差。这些结果加深了对XG/GG混合溶液流变性的认识,可为其实际应用(如在强化采油中的应用)提供依据。     

高碘酸钠氧化法测定羟丙基瓜尔胶上仲羟基取代度

高碘酸钠氧化可以使邻羟基C-C键发生高选择性断裂, 同时产生两分子醛基. 在pH=4.3及25 ℃的条件下, 对瓜尔胶及其衍生物羟丙基瓜尔胶进行高碘酸钠氧化, 采用红外光谱与核磁共振谱对氧化产物结构进行了表征. 结果表明, 氧化后的瓜尔胶和及羟丙基瓜尔胶结构中醛基主要以半缩醛的形式存在. 通过测定高碘酸钠的消耗量得到不同摩尔取代度羟丙基瓜尔胶糖单元上邻羟基的含量, 结合概率分析方法, 确定摩尔取代度分别为0.04, 0.14, 0.36, 0.51, 0.78, 1.05和1.53的羟丙基瓜尔胶在仲羟基上取代度分别为0.02, 0.09, 0.18, 0.30, 0.46, 0.59和1.03, 与其它方法得到的结果一致.     

Preparation,Characterization and Anticoagulant Activity of Guar Gum Sulphate

Guar gum was chemically modified by sulphonation using chlorosulphonic acid (ClSO₃H) as a reagent. Effects of molar ratio of ClSO₃H to glucopyranosic unit (ClSO₃H/GU), reaction time and reaction temperature on the degree of sulphonation (DS) and molecular weight (Mw) of products were studied. The structures of guar gum sulphate were investigated by GPC, FT‐IR and UV‐Visible spectroscopy. Activated partial thromboplastin time (APTT) assay showed that the guar gum sulphate could inhibit the intrinsic coagulant pathway. The anticoagulant activity strongly depended on the DS and Mw of polysaccharides. DS>0.56 was essential for anticoagulant activity. The guar gum sulphate with the DS of 0.85 and the Mw of 3.40×10⁴ had the best blood anticoagulant activity.     

Gelation Studies, 3

Summary: The sol‐gel transition of one thermoreversible gelling mixture made of xanthan gum and locust bean gum has been studied by using in situ time‐resolved dynamic light scattering (DLS) and measuring the spin‐lattice relaxation time T₁ of several protons. A critical dynamical behavior was observed near the sol‐gel transition, which is characterized by the presence of power‐law spectra over four decades of the delay time in the time‐intensity correlation function g₂(t)−1 ∼ t^−μ at 48 °C. The increase in T₁ with increasing temperature becomes steeper at 50 °C indicating a significant change in the local mobility of one anomeric proton of the xanthan side chain and the anomeric protons of the locust bean gum mannose backbone.

Temperature dependence of the spin‐lattice relaxation time T₁ for the equatorial anomeric proton of the mannopyranosic unit located next to the main chain of the xanthan.     

Antibacterial Broad-Spectrum Dendritic/Gellan Gum Hybrid Hydrogels with Rapid Shape-Forming and Self-Healing for Wound Healing Application

Treating wound infections is a difficult task ever since pathogenic bacteria started to develop resistance to common antibiotics. The present study develops hybrid hydrogels based on the formation of a polyelectrolyte complex between the anionic charges of dopamine-functionalized Gellan Gum (GG-DA) and the cationic moieties of the TMP-G2-alanine dendrimer. The hydrogels thus obtained can be doubly crosslinked with CaCl₂, obtaining solid hydrogels. Or, by oxidizing dopamine to GG-DA, possibly causing further interactions such as Schiff Base and Michael addition to take place, hydrogels called injectables can be obtained. The latter have shear-thinning and self-healing properties (efficiency up to 100%). Human dermal fibroblasts (HDF), human epidermal keratinocytes (HaCaT), and mouse monocyte cells (RAW 264.7), after incubation with hydrogels, in most cases show cell viability up to 100%. Hydrogels exhibit adhesive behavior on various substrates, including porcine skin. At the same time, the dendrimer serves to crosslink the hydrogels and endows them with excellent broad-spectrum microbial eradication activity within four hours, evaluated using Staphylococcus aureus 2569 and Escherichia coli 178. Using the same GG-DA/TMP-G2-alanine ratios hybrid hydrogels with tunable properties and potential for wound dressing applications can be produced.     

Biopolymer Synthesized by Strains of Xanthomonas sp Isolate from Brazil Using Biodiesel-Waste

The future supplies and usage of glycerol are expected to increase as biodiesel plants increase production, and the output will greatly outpace demand. Biodiesel production has already had a significant impact on the price of refined glycerol. A major concern of glycerol producers is the reduced price of glycerol resulting from the increased production of biodiesel. Some alternative uses for this glycerol that have been investigated are substrates for fermentation process or the production of biosurfactants, fatty acids, biopolymers, and others products. This work had as objective to evaluate two strains of Xanthomonas sp isolate from Brazil for xanthan gum in orbital agitator, analizing the apparent viscosity of aqueous solutions and selecting viscosity. The experiments of xanthan gum production were realized in orbital agitator with 120 rpm agitation, for cells production, and 180rpm, for biopolymer production, under a 28 °C temperature. The rheology of the fermentation broth was analyzed by apparent viscosity and the polymer was recovered with ethanol (1:3, v/v). After its recovery, the productivity evaluation was performed. The productivity were 0.157 and 0.363 gL⁻¹ for C1 and 0.186 and 0.363 gL⁻¹ for C9 to media glycerol or glycerol and sucrose, respectively. The viscosity analysis was performed for aqueous solutions 3%, at 25 °C, the best apparent viscosity was obtained using gum synthesized with glycerol and sucrose (50:50) at 25 °C, 143 mPa.s⁻¹ from Xanthomonas sp C1.