A novel method is described for transforming an anionic polymerization process into a cationic polymerization process assisted by organosilyl groups. The reaction of the p‐tolyldimethylsilyl end group of polystyrene and trifluoromethanesulfonic acid produced a silyl triflate end group that served as a macroinitiator for the living cationic polymerization of isobutyl vinyl ether. The Si O linkage in the block copolymers underwent specific cleavage by reaction with tetrabutylammonium fluoride.
A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of 1H NMR analysis.
POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl4 initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. 1H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.
The use of copper tubing as both the reactor and as a catalyst source is demonstrated for continuous controlled radical polymerization of methyl acrylate at ambient temperature and at low solvent content of 30%. The high surface area provided by the copper walls mediates the reaction via the single electron transfer–living radical polymerization (SET‐LRP) mechanism. The polymerizations proceeded quickly, reaching 67% conversion at a residence time of 16 min. Ligand concentration could also be reduced without a sharp drop in polymerization rate, demonstrating the potential for decreased raw material and post‐process purification costs. Chain extension experiments conducted using synthesized polymer showed high livingness. The combination of living polymer produced at high polymerization rates at ambient temperature and low volatile organic solvent content demonstrate the potential of a copper reactor for scale up of SET‐LRP.
A Y‐shaped amphiphilic fluorinated monomer, 1‐(1H,1H,2H,2H‐perfluorodecyloxy)‐3‐(3,6,9‐trioxadecyloxy)‐propan‐2‐yl acrylate has been synthesized and its polymerization by reversible addition–fragmentation chain transfer (RAFT) homopolymerization has been investigated. The results show that the molecular weights of the polymers are controlled and all the molecular weight distributions are lower than 1.4. Well‐defined copolymers with 2‐(N,N‐dimethylamino)ethyl methacrylate have been prepared by RAFT polymerization, and the surface properties of the block and random copolymers have been examined by contact angle measurement for water and hexadecane. It has been found that the surfaces of the block copolymers simultaneously exhibit excellent anti‐fog and oil‐repellent properties.
CuII compounds coordinated octahedrally with nitriles and associated with bulky, non‐coordinating counter ions can be applied in the polymerization of isobutene at 30 °C. High yields and a high content of terminal double bonds are reached in the resulting highly reactive polyisobutylenes, while the molecular masses are moderate. Two of the coordinating nitriles are more weakly coordinated than the other four, as can be concluded from an exemplary X‐ray structure and from vibrational spectra, thus providing easily accessible sites for substrate coordination.
Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.
N‐Adamantylacrylamide ( 3 ) was complexed with randomly methylated β‐cyclodextrin (RAMEB) forming the water‐soluble host–guest monomer‐complex 3a . A 1:1 complex stoichiometry was proven by NMR titration (Job's method). We investigated the free radical polymerization of the complex 3a using the water‐soluble azoinitiator 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)‐propane]dihydrochloride (VA044) at different temperatures. We observed that, below Tcrit a solution polymerization of 3a takes place. Above Tcrit, a precipitation mechanism leads to an increase in the relative polymerization rate.
A simple continuous flow wet‐spinning method to achieve mechanical reinforcement of the two oppositely charged biopolymers chitosan and gellan gum is described. The mechanical properties of these biopolymers are influenced by the order of addition. Using a facile method for mechanical reinforcement of gellan gum/chitosan fibers resulted in increases in Young's modulus, tensile strength, and toughness. Spinning gellan gum into chitosan resulted in the strongest fibers. We show that our fibers can provide a mechanical alternative for bio‐fibers without the need of cross‐linking. It is demonstrated that the fibers become ionically conducting in the presence of water vapor.
End group modification of polymers prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization was accomplished by conversion of trithiocarbonate into reactive functions able to conjugate easily with biomolecules or bioactive functionality. Polymers were prepared by RAFT, and subsequent aminolysis led to sulfhydryl‐terminated polymers that reacted in situ with an excess of dithiopyridyl disulfide to yield pyridyl disulfide‐terminated macromolecules or in the presence of ene to yield functional polymers. In the first route, the pyridyl disulfide end groups allowed coupling with oligonucleotide and peptide. The second approach exploited thiol–ene chemistry to couple polymers and model compounds such as carbohydrate and biotin with high yield.
In the ATRP and SFRP miniemulsion polymerization, a particle size range may exist in which the polymerization rate is larger than that of the corresponding bulk polymerization. Here, MC simulations are applied to clarify the reason for the acceleration. It is shown that the statistical variation of the trapping agent concentration (fluctuation effect) dominates the acceleration for good living conditions, while the segregation effect is important when the bimolecular termination is significant. Even for the segregation‐dominated conditions, the polymerization rate cannot be predicted accurately without accounting for the fluctuation effect.
Summary: Investigations regarding the cationic ring‐opening polymerization of 2‐phenyl‐2‐oxazoline under microwave irradiation and conventional heating are reported. This study was inspired by contradictory reports of the (non‐)existence of non‐thermal microwave effects that might accelerate the cationic ring‐opening of 2‐oxazolines. The polymerization of 2‐phenyl‐2‐oxazoline was investigated under pressure in acetonitrile and under reflux (or at the boiling point of butyronitrile in a closed vessel) in butyronitrile utilizing a single‐mode microwave reactor and automated synthesis robots with conventional heating.
Hybrid nanoparticles with a silica core and grafted poly(methyl methacrylate) (PMMA) or poly(n‐butyl methacrylate) (PBMA) chains were prepared via activators generated by electron transfer for atom transfer radical polymerization (AGET ATRP) at room temperature under high pressure. Due to enhanced propagation rate constant and reduced termination rate constant for polymerizations conducted under high pressure, the rate of polymerization was increased, while preserving good control over polymerization when compared to ATRP under ambient pressure. Molecular weights of greater than 1 million were obtained. The PMMA and PBMA brushes exhibited “semi‐diluted” or “diluted” brush architecture with the highest grafting densities ≈0.3 chain·nm−2.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.
The application of automated parallel synthesizer robots for the investigation of polymerization processes is of major interest at present. In this contribution we describe the application of the emulsion polymerization of styrene and vinyl acetate. The preparations of emulsions and latexes were investigated in detail and compared to “conventional” stirred tank reactors. In particular the influence of the vortex mixing as well as the limitations regarding solid content and reactor fouling are addressed.
We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.
This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.
pH‐responsive PHEMA‐based polymeric nanostructures were grown in a controlled manner by ATRP‐based surface‐initiated polymerization. Initiator nanopatterns were obtained on silicon wafers covered with OTS resists made by AFM scanning probe oxidation lithography. AFM images confirmed isolated grafting of stimuli‐responsive hedge and dot brush structures exhibiting dimensions corresponding to a few tens of chains.
