特征值问题的Lagrange型各向异性有限元方法

在各向异性网格下首先研究了二阶椭圆特征值问题算子谱逼近的若干抽象结果.然后将这些结果具体应用于线性和双线性Lagrange型协调有限元,得到了与传统有限元网格剖分下相同的最优误差估计,从而拓宽了已有的成果.     

A posteriori error estimators for optimal distributed control governed by the first‐order linear hyperbolic equation: DG method

In this article, We analyze the ‐version of the discontinuous Galerkin finite element method (DGFEM) for the distributed first‐order linear hyperbolic optimal control problems. We derive a posteriori error estimators on general finite element meshes which are sharp in the mesh‐width . These error estimators are shown to be useful in adaptive finite element approximation for the optimal control problems. For the DGFEM we admit very general irregular meshes. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2011     

CONVERGENCE ANALYSIS FOR A NONCONFORMING MEMBRANE ELEMENT ON ANISOTROPIC MESHES

Regular assumption of finite element meshes is a basic condition of most analysis offinite element approximations both for conventional conforming elements and nonconform-ing elements.The aim of this paper is to present a novel approach of dealing with theapproximation of a four-degree nonconforming finite element for the second order ellipticproblems on the anisotropic meshes.The optimal error estimates of energy norm and L~2-norm without the regular assumption or quasi-uniform assumption are obtained based onsome new special features of this element discovered herein.Numerical results are givento demonstrate validity of our theoretical analysis.     

The asymptotically optimal meshsize function for bi-p degree interpolation over rectangular elements

A method is presented to recover near optimal interpolation on finite element meshes based on information in the approximation error on an initial mesh. Only a certain class of admissable meshes with rectangular elements in the computational domains are allowed. The method attempts to reach the optimal mesh in one step from the initial mesh, and is based on the notion of meshsize function components or mesh density functions. Asymptotical results showing the optimality of the recovered meshes are given, and extensive computational verification of the method in the special case of Lagrange polynomial interpolation is provided.     

The influence of boundary approximation on transfer operators between non-nested meshes

Finite element methods with non-matching meshes can offer increased flexibility in many applications. Although the specific reasons for the use of non-matching meshes are apparently diverse, the common difficulty in all these numerical methods is the transfer of finite element approximation associated with one mesh to finite element approximation associated with another mesh. This paper complements previous quantitative studies of transfer operators between finite element spaces associated with unrelated meshes (T. Dickopf, R. Krause, Evaluating local approximations of the L²-orthogonal projection between non-nested finite element spaces, Tech. Rep. 2012-01, Institute of Computational Science, Università della Svizzera italiana, 2012). We study the important use case in which functions are mapped between a regular background mesh and an unstructured mesh of a complex geometry. Here, the former does not approximate the latter. (© 2013 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Sobolev方程的一类各向异性非协调有限元逼近

在各向异性网格下,分别讨论了Sobolev方程在半离散和全离散格式下的一类非协调有限元逼近,得到了与传统有限元方法相同的误差估计和一些超逼近性质.同时在半离散格式下,通过构造具有各向异性特征的插值后处理算子得到了整体超收敛结果.     

Shape regularity conditions for polygonal/polyhedral meshes,exemplified in a discontinuous Galerkin discretization

This article concerns shape regularity conditions on arbitrarily shaped polygonal/polyhedral meshes. In (J. Wang and X. Ye, A weak Galerkin mixed finite element method for second‐order elliptic problems, Math Comp 83 (2014), 2101–2126), a set of shape regularity conditions has been proposed, which allows one to prove important inequalities such as the trace inequality, the inverse inequality, and the approximation property of the L² projection on general polygonal/polyhedral meshes. In this article, we propose a simplified set of conditions which provides similar mesh properties. Our set of conditions has two advantages. First, it allows the existence of “small” edges/faces, as long as the shape of the polygon/polyhedron is regular. Second, coupled with an extra condition, we are now able to deal with nonquasiuniform meshes. As an example, we show that the discontinuous Galerkin method for Laplacian equations on arbitrarily shaped polygonal/polyhedral meshes, satisfying the proposed set of shape regularity conditions, achieves optimal rate of convergence. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 308–325, 2015     

A discrete duality finite volume discretization of the vorticity‐velocity‐pressure stokes problem on almost arbitrary two‐dimensional grids

We present an application of the discrete duality finite volume method to the numerical approximation of the vorticity‐velocity‐pressure formulation of the two‐dimensional Stokes equations, associated to various nonstandard boundary conditions. The finite volume method is based on the use of discrete differential operators obeying some discrete duality principles. The scheme may be seen as an extension of the classical Marker and Cell scheme to almost arbitrary meshes, thanks to an appropriate choice of degrees of freedom. The efficiency of the scheme is illustrated by numerical examples over unstructured triangular and locally refined nonconforming meshes, which confirm the theoretical convergence analysis led in the article. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1–30, 2015     

An upwind-mixed method on changing meshes for two-phase miscible flow in porous media

Two-phase miscible flow in porous media is governed by a system of nonlinear partial differential equations. In this paper, the upwind-mixed method on dynamically changing meshes is presented for the problem in two dimensions. The pressure is approximated by a mixed finite element method and the concentration by a method which upwinds the convection and incorporates diffusion using an expanded mixed finite element method. The method developed is shown to obtain almost optimal rate error estimate. When the method is modified we can obtain the optimal rate error estimate that is well known for static meshes. The modification of the scheme is the construction of a linear approximation to the solution, which is used in projecting the solution from one mesh to another. Finally, numerical experiments are given.     

A propos d'approximation par elements finis optimale pour les problèmes de contact unilatéral

We consider a interpolation type operator and a projection type operator with values in a finite element function set, defined for continuous functions and keeping positiveness. We prove with a counter-example that the two operators do not verify optimal approximation results with respect to a dual norm. This counter-example yields some predicted results concerning optimality of the mortar element method and finite element analysis for unilateral contact problems.     

A Conforming Quadratic Polygonal Element and Its Application to Stokes Equations

In this paper, we construct an $H^1$-conforming quadratic finite element on convex polygonal meshes using the generalized barycentric coordinates. The element has optimal approximation rates. Using this quadratic element, two stable discretizations for the Stokes equations are developed, which can be viewed as the extensions of the $P_2$-$P_0$ and the $Q_2$-(discontinuous)$P_1$ elements, respectively, to polygonal meshes. Numerical results are presented, which support our theoretical claims.     

Nonconforming rotated Q 1 element on non-tensor product anisotropic meshes

In this paper, we consider the nonconforming rotated Q ₁ element for the second order elliptic problem on the non-tensor product anisotropic meshes, i.e. the anisotropic affine quadrilateral meshes. Though the interpolation error is divergent on the anisotropic meshes, we overcome this difficulty by constructing another proper operator. Then we give the optimal approximation error and the consistency error estimates under the anisotropic affine quadrilateral meshes. The results of this paper provide some hints to derive the anisotropic error of some finite elements whose interpolations do not satisfy the anisotropic interpolation properties. Lastly, a numerical test is carried out, which coincides with our theoretical analysis.     

Nonconforming rotated Q 1 element on non-tensor product anisotropic meshes

In this paper, we consider the nonconforming rotated Q ₁ element for the second order elliptic problem on the non-tensor product anisotropic meshes, i.e. the anisotropic affine quadrilateral meshes. Though the interpolation error is divergent on the anisotropic meshes, we overcome this difficulty by constructing another proper operator. Then we give the optimal approximation error and the consistency error estimates under the anisotropic affine quadrilateral meshes. The results of this paper provide some hints to derive the anisotropic error of some finite elements whose interpolations do not satisfy the anisotropic interpolation properties. Lastly, a numerical test is carried out, which coincides with our theoretical analysis.     

Residual error estimate for BEM-based FEM on polygonal meshes

A conforming finite element method on polygonal meshes is reviewed which handles hanging nodes naturally. Trial functions are defined to fulfil the homogeneous PDE locally and they are treated by means of local boundary integral equations. Using a quasi-interpolation operator of Clément type a residual-based error estimate is obtained. This a posteriori estimator can be used to rate the accuracy of the approximation over polygonal elements or it can be applied to an adaptive BEM-based FEM. The numerical experiments confirm our results and show optimal convergence for the adaptive strategy on general meshes.     

Development of a P2 element with optimal L2 convergence for biharmonic equation

It is well known that convergence rate of finite element approximation is suboptimal in the L² norm for solving biharmonic equations when P₂ or Q₂ element is used. The goal of this paper is to derive a weak Galerkin (WG) P₂ element with the L² optimal convergence rate by assuming the exact solution sufficiently smooth. In addition, our new WG finite element method can be applied to general mesh such as hybrid mesh, polygonal mesh or mesh with hanging node. The numerical experiments have been conducted on different meshes including hybrid meshes with mixed of pentagon and rectangle and mixed of hexagon and triangle.     

A multilevel preconditioner for the C-R FEM for elliptic problems with discontinuous coefficients

In this paper, we propose a multilevel preconditioner for the Crouzeix-Raviart finite element approximation of second-order elliptic partial differential equations with discontinuous coefficients. Since the finite element spaces are nonnested, weighted intergrid transfer operators, which are stable under the weighted L2 norm, are introduced to exchange information between different meshes. By analyzing the eigenvalue distribution of the preconditioned system, we prove that except a few small eigenvalues, all the other eigenvalues are bounded below and above nearly uniformly with respect to the jump and the mesh size. As a result, we get that the convergence rate of the preconditioned conjugate gradient method is quasi-uniform with respect to the jump and the mesh size. Numerical experiments are presented to confirm our theoretical analysis.     

Convergence and nonlinear stability of the Lagrange-Galerkin method for the Navier-Stokes equations

Summary The Lagrange-Galerkin method is a numerical technique for solving convection — dominated diffusion problems, based on combining a special discretisation of the Lagrangian material derivative along particle trajectories with a Galerkin finite element method. We present optimal error estimates for the Lagrange-Galerkin mixed finite element approximation of the Navier-Stokes equations in a velocity/pressure formulation. The method is shown to be nonlinearly stable.     

Nonconforming rotated Q_1 element on non-tensor product anisotropic meshes

In this paper, we consider the nonconforming rotated Q1 element for the second order elliptic problem on the non-tensor product anisotropic meshes, i.e. the anisotropic affine quadrilateral meshes. Though the interpolation error is divergent on the anisotropic meshes, we overcome this difficulty by constructing another proper operator. Then we give the optimal approximation error and the consistency error estimates under the anisotropic affine quadrilateral meshes. The results of this paper provide some hints to derive the anisotropic error of some finite elements whose interpolations do not satisfy the anisotropic interpolation properties. Lastly, a numerical test is carried out, which coincides with our theoretical analysis.     

Asymptotically exact a posteriori estimators for the pointwise gradient error on each element in irregular meshes. Part 1: A smooth problem and globally quasi-uniform meshes

A class of a posteriori estimators is studied for the error in the maximum-norm of the gradient on single elements when the finite element method is used to approximate solutions of second order elliptic problems. The meshes are unstructured and, in particular, it is not assumed that there are any known superconvergent points. The estimators are based on averaging operators which are approximate gradients, ``recovered gradients', which are then compared to the actual gradient of the approximation on each element. Conditions are given under which they are asympotically exact or equivalent estimators on each single element of the underlying meshes. Asymptotic exactness is accomplished by letting the approximate gradient operator average over domains that are large, in a controlled fashion to be detailed below, compared to the size of the elements.

     

Nonconforming mixed finite element approximation to the stationary Navier-Stokes equations on anisotropic meshes

The main aim of this paper is to study the error estimates of a rectangular nonconforming finite element for the stationary Navier-Stokes equations under anisotropic meshes. That is, the nonconforming rectangular element is taken as approximation space for the velocity and the piecewise constant element for the pressure. The convergence analysis is presented and the optimal error estimates both in a broken H¹-norm for the velocity and in an L²-norm for the pressure are derived on anisotropic meshes.