Flavor analysis by HRGC/FT-IR: Cherimoya (Annona cherimolia,mill.) fruit volatiles

The volatiles of fresh cherimoya (Annona cherimolia, Mill.) fruit pulp were separated by combined high-vacuum distillationliquid/liquid extraction (pentane/dichloromethane 2+1). After preseparation by liquid chromatography on silica gel three fractions (I-III) were obtained by eluting with pentane (I), pentane/diethyl ether (9+1) (II), and diethyl ether (III), and fractions II and III were subjected to HRGC/FT-IR analysis. 26 volatile compounds comprising nearly all the main components (range, 10–300 μg/kg fruit pulp) were identified by this technique for the first time in cherimoya fruit.     

Thin Layer Chromatography of Metal Ions Complexed with Anils (VII) Detection,Separation, and Determination

Abstract

Dark colored chelates of p-dimethylaminoanil of 3-benzoyl-methylglyoxal bidentate ligand with Sb(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), ZrO(II), Y(III), La(III), Pr(III), Nd(III) Sm(III), Gd(III) and Dy(III) have been chromatographed on starch bound silica gel thin layers. New correlations of I.R. with R_f (resolving solvent) have been used to ascertain the colored spots.

Among various mixtures resolved qualitatively a few typical ones have been alanysed quantitatively. Errors in determinations and maximum separation limits have also been deduced.     

Aminorex and rexamino as metabolites of levamisole in the horse

Administration studies of levamisole in horses were carried out using two different levamisole preparations, namely, levamisole hydrochloride oral bolus and levamisole phosphate injectable solution. These preparations were analysed in detail for the presence of aminorex-like impurities. Both levamisole preparations were found to contain 1-(2-mercaptoethyl)-4-phenyl-2-imidazolidinone (I) and 4-phenyl-2-imidazolidinone (II) as degradation impurities, but neither aminorex nor rexamino was detected in these preparations. After the administration of these preparations to horses, aminorex, rexamino, in addition to levamisole and compound II, were detected in post-administration urine and plasma samples, among which compound II was found to have the longest detection time. Administration study of compound II was then performed on another horse to investigate whether it could be a metabolic precursor of aminorex and/or rexamino. However, no aminorex and rexamino was detected in the post-administration samples, suggesting that compound II was not a metabolic precursor of aminorex or rexamino. A metabolite (III) of compound II, tentatively identified to be a hydrolysis product of compound II, was observed instead.It has been established unequivocally that the normal use of levamisole products in horses can lead to the presence of aminorex, rexamino and 4-phenyl-2-imidazolidinone (II) in their urine and blood samples. As compound II has the longest detection time, the detection of aminorex (and in some cases rexamino) in some of the official samples from racehorses can be ascribed to the use of levamisole products as long as compound II is also present as a marker. These findings should be of direct relevance to the investigation of some of the cases of aminorex detection in official doping control samples from racehorses.     

The enthalpies of protonation of propenyllithiums,phenyllithium, and ethyllithium

The enthalpies of protonation of allyllithium (I), trans-1-propenyllithium (II), 2-propenyllithium (III), phenyllithium (IV), and ethyllithium (V) in diethyl ether have been determined calorimetrically. The aggregations of I, II, III, and V have been determined by vapor pressure measurements. The significance of the data is discussed.     

Differences in thermal decomposition of Ag(I), Mn(II), Fe(II) and Fe(III) complexes of cyclic dithiocarbamates

The thermal decomposition of pyrrolidinedithiocarbamate (Pyr) and piperidinedithiocarbamate (Pip) complexes of Ag(I), Mn(II), Fe(II) and Fe(III) have been investigated by thermogravimetry and differential scanning calorimetry. The decomposition intermediates and final products were identified from their X-ray diffraction patterns. Changes in their IR spectra were correlated with their thermogravimetric profiles. The hydrated compounds decomposed without loss of water and oxides were detected as the final decomposition products even in nitrogen atmosphere.     

Metal ion capillary zone electrophoresis with direct UV detection: Separation of metal cyanide complexes

Mixtures of cyanide complexes of iron(III), copper(I), iron(II), nickel(II), chromium(III), mercury(II), palladium(II), silver(I), cadmium(II), zinc(II), cobalt(II), and cobalt(III) have been separated by capillary zone electrophoresis using a fused silica capillary and 20 mM phosphate buffers containing 1–2 mM sodium cyanide. The complexes were detected by direct UV absorpticn at 214 nm; detection limits are in the mid ppb range for all metals except cadmium and zinc. The different detectability of various metal cyanide complexes enables the application of the method to the analysis of complex matrices such as cyanide plating bath solutions.     

地耳苯抗疟有效成份的研究—地耳苯系A、B、C、D的分离和结构

从地耳草中分离到四个间苯三酚衍生物, 定名为地耳草素A、B、C、D. 通过紫外、红外、核磁和质谱分析以及化学反应, 推定其结构分别为4、8、12和14. 4和8对鼠疟原虫有显著抑制作用.     

Molecular and electronic structures of bis(pyridine-2,6-diimine)metal complexes [ML2](PF6)n (n = 0, 1, 2, 3; M = Mn, Fe, Co, Ni, Cu, Zn)

A series of mononuclear, octahedral first-row transition metal ion complexes mer-[M(II)L0(2)](PF6)2 containing the tridentate neutral ligand 2,6-bis[1-(4-methoxyphenylimino)ethyl]pyridine (L0) and a Mn(II), Fe(II), Co(II), Ni(II), Cu(II), or Zn(II) ion have been synthesized and characterized by X-ray crystallography. Cyclic voltammetry and controlled potential coulometry show that each dication (except those of Cu(II) and Zn(II)) can be reversibly one-electron-oxidized, yielding the respective trications [M(III)L0(2)]3+, and in addition, they can be reversibly reduced to the corresponding monocations [ML2]+ and the neutral species [ML2]0 by two successive one-electron processes. [MnL2]PF6 and [CoL2]PF6 have been isolated and characterized by X-ray crystallography; their electronic structures are described as [Mn(III)L1(2)]PF6 and [Co(I)L0(2)]PF6 where (L1)1- represents the one-electron-reduced radical form of L0. The electronic structures of the tri-, di-, and monocations and of the neutral species have been elucidated in detail by a combination of spectroscopies: UV-vis, NMR, X-band EPR, Mossbauer, temperature-dependent magnetochemistry. It is shown that pyridine-2,6-diimine ligands are noninnocent ligands that can be coordinated to transition metal ions as neutral L0 or, alternatively, as monoanionic radical (L1)1-. All trications are of the type [M(III)L0(2)]3+, and the dications are [M(II)L0(2)]2+. The monocations are described as [Mn(III)L1(2)]+ (S = 0), [Fe(II)L0L1]+ (S = 1/2), [Co(I)L0(2)]+ (S = 1), [Ni(I)L0(2)]+ (S = 1/2), [Cu(I)L0(2)]+ (S = 0), [Zn(II)L1L0]+ (S = 1/2) where the Mn(II) and Fe(II) ions are low-spin-configurated. The neutral species are described as [Mn(II)L1(2)]0, [Fe(II)L1(2)]0, [Co(I)L0L1]0, [Ni(I)L0L1]0, and [Zn(II)L1(2)]0; their electronic ground states have not been determined.     

Spectrophotometric determination of certain cephalosporins using molybdophosphoric acid. Part II. Determination of cefadroxil, cefapirin, ceforanide and cefuroxime

The use of molybdophosphoric acid as an oxidising agent for the spectrophotometric determination of four cephalosporin derivatives, viz., cefadroxil monohydrate (I), cefapirin sodium (II), ceforanide L-lysine (III) and cefuroxime sodium (IV), either in the pure form or in pharmaceutical formulations is described. Beer's law is obeyed up to 100 micrograms ml-1 for I, up to 60 micrograms ml-1 for II and IV and up to 80 micrograms ml-1 for III. The molar absorptivities were 4.58 X 10(3), 11.3 X 10(3), 9.8 X 10(3) and 10.9 X 10(3) l mol-1 cm-1 and the Sandell sensitivities were 83.3, 39.3, 53.0 and 41.0 ng cm-2 for I, II, III and IV, respectively. The slopes and intercepts of the equations of the regression line were calculated for each of these drugs with the following correlation coefficients: I, 0.9993; II, 0.9999; III, 1.000; and IV, 0.9999. These antibiotics were determined successfully both in the pure form and in pharmaceutical preparations. The results demonstrated that the proposed procedure is at least as accurate, precise and reproducible as the official methods, while being simpler and less time consuming. A statistical analysis indicated that there was no significant difference between the results obtained by the proposed procedure and those of the official methods.     

Application of derivative, derivative ratio, and multivariate spectral analysis and thin-layer chomatography-densitometry for determination of a ternary mixture containing drotaverine hydrochloride, caffeine, and paracetamol

New selective, precise, and accurate methods are described for the determination of a ternary mixture containing drotaverine hydrochloride (I), caffeine (II), and paracetamol (III). The first method uses the first (D1) and third (D3) derivative spectrophotometry at 331 and 315 nm for the determination of (I) and (III), respectively, without interference from (II). The second method depends on the simultaneous use of the first derivative of the ratio spectra (DD1) with measurement at 312.4 nm for determination of (I) using the spectrum of 40 microg/mL (III) as a divisor or measurement at 286.4 and 304 nm after using the spectrum of 4 microg/mL (I) as a divisor for the determination of (II) and (III), respectively. In the third method, the predictive abilities of the classical least-squares, principal component regression, and partial least-squares were examined for the simultaneous determination of the ternary mixture. The last method depends on thin-layer chromatography-densitometry after separation of the mixture on silica gel plates using ethyl acetate-chloroform-methanol (16 + 3 + 1, v/v/v) as the mobile phase. The spots were scanned at 281, 272, and 248 nm for the determination of (I), (II), and (III), respectively. Regression analysis showed good correlation in the selected ranges with excellent percentage recoveries. The chemical variables affecting the analytical performance of the methodology were studied and optimized. The methods showed no significant interferences from excipients. Intraday and interday assay precision and accuracy values were within regulatory limits. The suggested procedures were checked using laboratory-prepared mixtures and were successfully applied for the analysis of their pharmaceutical preparations. The validity of the proposed methods was further assessed by applying a standard addition technique. The results obtained by applying the proposed methods were statistically analyzed and compared with those obtained by the manufacturer's method.     

Use of tetracyanoplatinate (ii) for the luminescent detection of metalions

The tetracyanoplatinate(II) (TCP) ion forms insoluble fluorescent compounds with many metal ions. This property has not hitherto been exploited for analytical use. The soluble sodium TCP salt has been applied as a reagent for metal ion detection. Fluorescent precipitates useful for detection of the metal ions were obtained with Y(III), Zr(IV), Ag(I), Zn(II), Cd(II), Hg(I), Hg(II), A1(III), Pb(II), La(III) and Th(IV). Limits of detection ranged from 5 to 200 ppm. With ammonium acetate as a masking agent, selective detection of 10 ppm of silver was achieved in the presence of the other metal ions. As little as 20 ppm of zirconium can be detected in the presence of hafnium, which yields a non-fluorescent precipitate.     

Study on the bile salt, sodium scymnol sulfate, from Rhizoprionodon acutus. II. The structures of scymnol, anhydroscymnol and sodium scymnol sulfate.

The crystal structures of anhydroscymnol (I) and scymnol (II), which were prepared from sodium scymnol sulfate (III) isolated from the bile of Rhizoprionodon acutus, have been determined by means of X-ray diffraction analyses. The crystals of I are orthorhombic, space group P2(1)2(1)2(1) with Z = 4; unit-cell dimensions: a = 13.562(2), b = 21.636(2), c = 8.735(2) A; II orthorhombic, space group P2(1)2(1)2, with Z = 4; unit-cell dimensions a = 18.553(2), b = 19.887(2), c = 7.986(2) A. Both structures, (24R,25S)-(+)-24,26-epoxy-5 beta-cholestane-3 alpha,7 alpha,12 alpha,27-tetrol (I) and (24R)-(+)-5 beta-cholestane-3 alpha,7 alpha,12 alpha,24,26,27-hexol (II), were solved from diffractometric data by direct methods and refined by least-squares calculations to R = 0.073 (I) and R = 0.062 (II) (2044 (I) and 2250 (II) observed independent significant reflections (I greater than 3 sigma(I)), respectively. All the hydroxyl groups of both compounds are involved in a hydrogen-bonding network. The structure of III was determined to be (24R,25S)-(+)-3 alpha,7 alpha,12 alpha,24,26-pentahydroxy-5 beta-cholestan-27-yl sodium sulfate, based on the chemical data that alkaline degradation of III with aqueous potassium hydroxide gives only I.     

The effect of medium acidity on the rate of protonation of 6-dimethylaminofulventricarbonyl-chromium, -molybdenum, -tungsten and comparison of their basicity

Protonation of 6-dimethylaminofulvenic complexes of chromium (I), molybdenum (II) and tunsten (III) carbonyls in trifluoroacetic and acetic acid solutions of differing acidity in methylene chloride has been studied using PMR and IR spectroscopy. It has been established that the complexes are protonated at the metal atom and that the protonation rate is linearly dependent on the acidity of the medium. Comparison of the basicities of complexes I–III has shown that their basicity ratio is I/II/III ? 1/150/1800.     

Two-dimensional electrophoretic analysis of cryoproteins: a report of 335 samples

Cryoproteins are defined as proteins precipitating at low temperature. Most frequently, the precipitate contains immunoglobulins (Igs), and are therefore called cryoglobulins. Three types of cryoglobulins have been described: type I contains a single monoclonal Ig, whereas type II is a mixture of a monoclonal Ig with polyclonal Igs, and type III is a mixture of polyclonal Igs of different isotypes, most frequently IgG and IgM. Type II and type III are also called mixed cryoglobulins. A new type of cryoglobulins, containing polyclonal IgG associated with a mixture of polyclonal and monoclonal IgM has recently been described after two-dimensional polyacrylamide gel electrophoresis (2-DE). This type of cryoglobulin has been called type II-III cryoglobulin. In this study, we report on 2-DE analysis of 335 cryoproteins from patients with heterogeneous clinical conditions. In 69 out of 335 samples (20.7%), 2-DE revealed patterns that were inadequate to characterize the cryoproteins. Out of 335 (79.3%) cryoproteins, 266 were identified according to their two-dimensional patterns: 265 samples contained Igs and were diagnosed as cryoglobulins, and one sample consisted of fibrinogen, and was identified as cryofibrinogen. Among the 265 cryoglobulins, types I, II, and III were observed in 9 (3.4%), 69 (26%), and 116 (43.8%) cases, respectively, whereas type II-III was detected in 71 (26.8%) cases. Eleven of the latter consisted of oligoclonal Igs (IgM in 10 cases, IgA in 1 case) mixed with traces of polyclonal IgG. These cryoproteins were tentatively named type II-IIIvariant cryoglobulins. Taken together, our result clearly show that 2-DE is a suitable technique to analyze cryoproteins.     

Micellar catalysis in reactions of some β-lactam antibiotics with p -dimethylaminobenzaldehyde

Kinetic study of the reactions of amoxicillin (I), ampicillin (II) and cephlaxin (III) with p-dimethylaminobenzaldehyde (DAB) in weakly acidic EtOH/H₂O solution has been investigated using spectrophotometric method. Relatively slow reversible reactions of first order with respect to the antibiotic have been found. A derived equation for detecting the existence of reversibility from the linearity has been introduced. The effect of anionic surfactants (sodium dodecyl sulfate, SDS) on the kinetic of these reactions in aqueous solution has been studied. The presence of 0.005 M of SDS increases the rate constants by 4.3, 2 and 3.3 times for I, II and III, respectively. The consequence of the rate constants have a similar order in absence and presence of SDS; III > II > I. The rate constants pass through maxima with increasing SDS concentration followed by a gradual but steady decrease in the rate as the surfactant concentration increases further. Multiple linear regression method has been performed to evaluate the binding constants of each drug and DAB with SDS from the resulted kinetic data. The results suggest using multiple linear correlation method for such calculations, which is more accurate, reliable and less time consuming. The calculated binding constants between these drugs with SDS are following the consequence I > II > III which is related to the differences in their substitutions. The kinetic results were employed for spectrophotometric microdetermination of these drugs (I–III) in aqueous solution. The method was based on the reaction of β-lactam with an excess of DAB in presence of SDS and HCl (pH 2) at a wavelength 410 nm. The results indicate that the presented method is simple, precise and accurate. This method is applied to bulk antibiotics and some of their pharmaceutical preparations.     

A spectrophotometric and polarographic investigation of three new cyclohexene-substituted benzodiazepines

Three recently introduced benzodiazepine derivatives, tetrazepam (I), nortetrazepam (II) and menitrazepam (III) have been subjected to spectral and polarographic investigation. From the ultraviolet spectral data their pK(a)-values have been determined: 4.28 (I), 4.3 (II) and 3.5 (III). From the polarographic measurements it can be concluded that in I and II the 4,5 CN double bond is reduced with 2 electrons. For the first time for the benzodiazepine series it has been observed that in slightly alkaline solutions this process takes place in two separate 1-electron steps. In III, first the aromatic nitro group is reduced to a hydroxylamine group, then at more negative potentials the CN double bond is also reduced; its reduction wave mostly coalesces with that for the 6-electron reduction of the nitro group to an amino group. A differential pulse polarographic method is presented, for the determination of I, II, III at concentrations as low as 10(-7)M.     

MONOFUNCTIONAL3,4-and4',5'-PHOTOCYCLOADDUCTS BETWEEN 4,5'-DIMETHYLANGELICIN and THYMINE

By irradiating (365 nm) an aqueous liquid solution of 4,5'-dimethylangelicin. a monofunctional photosensitizing furocoumarin, in the presence of an excess of thymine, two new compounds, I and II, have been obtained; they do not show fluorescence when observed with Wood's light. The nuclear magnetic resonance data, the marked similarity of UV absorption and fluorescence spectra of these compounds with those of synthetic 3.4-dihydro-4,5'-dimethylangelicin and their capacity to undergo photodissociation (254 nm) yielding the starting thymine and 4,5'-dimethylangelicin in equimolecular amounts, are consistent with C₄-cycloadducts between the 3,4-double bond of the furocoumarin and 5,6-double bond of thymine. Nuclear magnetic resonance data indicate for I and II a head-to-head and a head-to-tail structure, respectively. When irradiation is carried out in the frozen state, two adducts. III and IV, fluorescent at Wood's light, have been obtained other than the two above-mentioned compounds I and II. Compounds III and IV have been identified as 4'.5'-fluorescent adducts between the 4',5'-double bond of the furocoumarin and the 5.6-double bond of thymine; one of them (III) is identical to that formed in the photoreaction between DNA and 4,5'-dimethylangelicin; for this last compound a cis head-to-head structure has been suggested.     

New plastic membrane and carbon paste ion selective electrodes for the determination of triprolidine.

Triprolidine (Trip) ion selective electrodes of three types: the conventional polymer membrane (I), graphite coated electrode (II) and carbon paste electrode (III), have been prepared, based on the ion pair of triprolidine hydrochloride with sodium tetraphenylborate. The electrodes exhibit a linear response with a mean calibration graph slope of 56.12, 55.00 and 54.32 mV decade(-1) at 25 degrees C for I, II and III, respectively, within the concentration ranges 1.96 x 10(-5) - 1.00 x 10(-2) M for I and 3.84 x 10(-5) - 1.00 x 10(-2) M for II and III. The detection limits are 1.13+/-0.13 x 10(-5), 1.70+/-0.06 x 10(-5) and 1.78+/-0.05 x 10(-5) M for the three electrodes, respectively. The change of pH within the ranges 4.85 - 8.75 and 4.70 - 8.50 for I and III, respectively, did not affect the electrode performance. The standard electrode potentials were determined at different temperatures and were used to calculate the isothermal coefficient of the electrode. The electrodes showed a very good selectivity for Trip with respect to a large number of inorganic cations and compounds. The standard addition method was applied to the determination of TripCl in pure solution, pharmaceutical preparations, and urine samples.     

Atomic Emission Spectrometric Determination of Antazoline,Hydralazine, Amiloride,Thiamine and Quinine Based on Formation of Ion Associates with Ammonium Reineckate.

Abstract

Ion-associate complexes of Antazoline HC1 (I), Hydralazine HC1 (II), Amiloride HC1 (III), Thiamine HC1 (IV) and Quinine sulphate (V) with ammonium reineckate were precipitated and their solubilities were studied as a function of pH, ionic strength and temperature. Saturated solutions of each ion-associate under the optimum precipitation conditions were prepared and the metal ion-content in the supernatent was determined. The solubility products were thus elucidated at different temperatures. A new accurate and precise method using direct coupled plasma-atomic emission spectrometry for the determination of the investigated drugs in pure solutions and in pharmaceutical preparations is described. The drugs can be determined by the present method in the ranges 0.3-3.0, 0.19-1.96, 0.3-3.0, 0.33-3.37 and 0.78-7.82 mg/25 ml solutions of I, II, III, IV and V, respectively.     

Studies on the synthesis of 5-(p-aminobenzylidene)-rhodanine and its properties

A new analytical reagent 5-(p-aminobenzylidene)-rhodanine (ABR) was synthesized. The acidic dissociation constant of ABR has been determined. The properties, the acid-base behavior of ABR and the reactions of ABR with metallic ions have been studied. The color reactions of the reagent with Pd(II), Au(III), Ag(I), Ru(III), Hg(II) and Cu(II) are studied in detail. The composition of Pd(II)-ABR, Au(III)-ABR and Ag(I)-ABR complexes were discussed.