Rare earth metal bis(amide) complexes bearing amidinate ancillary ligands: synthesis, characterization, and performance as catalyst precursors for cis-1,4 selective polymerization of isoprene

A family of rare earth metal bis(amide) complexes bearing monoanionic amidinate [RC(N-2,6-Me(2)C(6)H(3))(2)](-) (R = cyclohexyl (Cy), phenyl (Ph)) as ancillary ligands were synthesized and characterized. One-pot salt metathesis reaction of anhydrous LnCl(3) with one equivalent of amidinate lithium [RC(N-2,6-Me(2)C(6)H(3))(2)]Li, following the introduction of two equivalents of NaN(SiMe(3))(2) in THF at room temperature afforded the neutral and unsolvated mono(amidinate) rare earth metal bis(amide) complexes [RC(N-2,6-Me(2)C(6)H(3))(2)]Y[N(SiMe(3))(2)](2) (R = Cy (1); R = Ph (2)), and the "ate" mono(amidinate) rare earth metal bis(amide) complex [CyC(N-2,6-Me(2)C(6)H(3))(2)]Lu[N(SiMe(3))(2)](2)(μ-Cl)Li(THF)(3) (3) in 61-72% isolated yields. These complexes were characterized by elemental analysis, NMR spectroscopy, FT-IR spectroscopy, and X-ray single crystal diffraction. Single crystal structural determination revealed that the central metal in complexes 1 and 2 adopts a distorted tetrahedral geometry, and in complex 3 forms a distorted trigonal bipyramidal geometry. In the presence of AlMe(3), and in combination with one equimolar amount of [Ph(3)C][B(C(6)F(5))(4)], complexes 1 and 2 showed high activity towards isoprene polymerization to give high molecular weight polyisoprene (M(n) > 10(4)) with good cis-1,4 selectivity (>90%).     

Synthesis, characterization of bridged bis(amidinate) lanthanide amides and their application as catalysts for addition of amines to nitriles for monosubstituted N-arylamidines

A series of lanthanide amide complexes supported by bridged bis(amidinate) ligand L, LLnNHAr(1)(DME) (L = [Me(3)SiNC(Ph)N(CH(2))(3)NC(Ph)NSiMe(3)], Ar(1) = 2,6-(i)Pr(2)C(6)H(3), DME = dimethoxyethane, Ln = Y (1), Pr (2), Nd (3), Gd (4), Yb (5)), [Yb(μ(2)-NHPh)](2)(μ(2)-L)(2) (6) and [LYb](2)(μ(2)-NHAr(2))(2) (7) (Ar(2) = (o-OMe)C(6)H(4)), were synthesized by reaction of LLnCl(THF)(2) with the corresponding lithium amide in good yields and structurally characterized by X-ray crystal structure analyses. All complexes were found to be precatalysts for the catalytic addition of aromatic amines to aromatic nitriles to give monosubstituted N-arylamidines. The catalytic activity was influenced by lanthanide metals and the amido groups with the active sequence of Y (1) < Gd (4) < Nd (3) < Pr (2) ～ Yb (5) for the lanthanide metals and -NHAr(2) < -NHPh < -NHAr(1) for the amido groups. The catalytic addition reaction with complex 5 showed a good scope of aromatic amines. Some key reaction intermediates were isolated and structurally characterized, including the amidinate complexes LLn[NPhCNAr(1)](PhCN) (Ln = Y (8), Ln = Yb (9)), LYb[NAr(2)CNAr(1)](Ar(2)CN) (10), and amide complex 5 prepared by protonation of 9 by Ar(1)NH(2). Reactivity studies of these complexes suggest that the present catalytic formation of monosubstituted N-arylamidines proceeds through nucleophilic addition of an amido species to a nitrile, followed by amine protonolysis of the resultant amidinate species.     

Divalent lanthanide complexes supported by the bridged bis(amidinates) L Me3SiN(Ph)CN(CH2)3NC(Ph)NSiMe3]: synthesis, molecular structures and one-electron-transfer reactions

Metathesis reactions of YbI(2) with Li(2)L (L = Me(3)SiN(Ph)CN(CH(2))(3)NC(Ph)NSiMe(3)) in THF at a molar ratio of 1:1 and 1:2 both afforded the Yb(II) iodide complex [{YbI(DME)(2)}(2)(μ(2)-L)] (1), which was structurally characterized to be a dinuclear Yb(II) complex with a bridged L ligand. Treatment of EuI(2) with Li(2)L did not afford the analogous [{EuI(DME)(2)}(2)(μ(2)-L)], or another isolable Eu(II) complex, but the hexanuclear heterobimetallic cluster [{Li(DME)(3)}(+)](2)[{(EuI)(2)(μ(2)-I)(2)(μ(3)-L)(2)(Li)(4)}(μ(6)-O)](2-) (2) was isolated as a byproduct in a trace yield. The rational synthesis of cluster 2 could be realized by the reaction of EuI(2) with Li(2)L and H(2)O in a molar ratio of 1:1.5:0.5. The reduction reaction of LLnCl(THF)(2) (Ln = Yb and Eu) with Na/K alloy in THF gave the corresponding Ln(II) complexes [Yb(3)(μ(2)-L)(3)] (3) and [Eu(μ(2)-L)(THF)](2) (4) in good yields. An X-ray crystal structure analysis revealed that each L in complex 3 might adopt a chelating ligand bonding to one Yb atom and each Yb atom coordinates to an additional amidinate group of the other L and acts as a bridging link to assemble a macrocyclic structure. Complex 4 is a dimer in which the two monomers [Eu(μ(2)-L)(THF)] are connected by two μ(2)-amidinate groups from the two L ligands. Complex 3 reacted with CyN═C═NCy and diazabutadienes [2,6-(i)Pr(2)C(6)H(3)N═CRCR═NC(6)H(3)(i)Pr(2)-2,6] (R═H, CH(3)) (DAD) as a one-electron reducing agent to afford the corresponding Yb(III) derivatives: the complex with an oxalamidinate ligand [LYb{(NCy)(2)CC(NCy)(2)}YbL] (5) and the complexes containing a diazabutadiene radical anion [LYb((i)Pr(2)C(6)H(3)NCRCRNC(6)H(3)(i)Pr(2))] (R = H (6), R = CH(3) (7)). Complexes 5-7 were confirmed by an X-ray structure determination.     

Synthesis and structural characterization of a series of lanthanide(II) amides: steric effect of amido ligand

The synthesis and structures of a series of lanthanide(II) and lanthanide(III) complexes supported by the amido ligand N(SiMe3)Ar were described. Several lanthanide(III) amide chlorides were synthesized by a metathesis reaction of LnCl3 with lithium amide, including {[(C6H5)(Me3Si)N]2YbCl(THF)}2.PhCH3 (1), [(C6H3-iPr2-2,6)(SiMe3)N]2YbCl(mu-Cl)Li(THF)3.PhCH3 (4), [(C6H3-iPr2-2,6)(SiMe3)N]YbCl2(THF)3 (6), and [(C6H3-iPr2-2,6)(SiMe3)N]2SmCl3Li2(THF)4 (7). The reduction reaction of 1 with Na-K alloy afforded bisamide ytterbium(II) complex [(C6H5)(Me3Si)N]2Yb(DME)2 (2). The same reaction for Sm gave an insoluble black powder. An analogous samarium(II) complex [(C6H5)(Me3Si)N]2Sm(DME)2 (3) was prepared by the metathesis reaction of SmI2 with NaN(C6H5)(SiMe3). The reduction reaction of ytterbium chloride 4 with Na-K alloy afforded monoamide chloride {[(C6H3-iPr2-2,6)(SiMe3)N]Yb(mu-Cl)(THF)2}2 (5), which is the first example of ytterbium(II) amide chloride, formed via the cleavage of the Yb-N bond. The same reduction reaction of 7 gave a normal bisamide complex [(C6H3-iPr2-2,6)(SiMe3)N]2Sm(THF)2 (8) via Sm-Cl bond cleavage. This is the first example for the steric effect on the outcome of the reduction reaction in lanthanide(II) chemistry. 5 can also be synthesized by the Na/K alloy reduction reaction of 6. All of the complexes were fully characterized including X-ray diffraction for 1-7.     

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](μ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (μ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](μ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.     

Synthesis and structural characterisation of lithium and sodium 2,6-dibenzylphenolate complexes

The stoichiometric treatment of 2,6-dibenzylphenol (HOdbp) or 2,2"-dimethoxy-2,6-dibenzylphenol (HOdbpOMe) with n-butyllithium or sodium bis(trimethylsilyl)amide (the latter as a solution in THF) in Et2O or DME affords the dimeric alkali metal phenolates [{M(Odbp)(L)}2] (M = Li; L = Et2O (1), L = DME (2), M = Na; L = Et2O (5), L = DME (6)), [{Li(OdbpOMe)}2] (3) and [{M(OdbpOMe)(L)}2] (M = Li; L = DME (4), M = Na; L = THF (7), L = DME (8)). Complexes 3 and 7 exhibit -OdbpOMe methoxy coordination and all four sodium complexes (5-8) display pi-aryl contacts from one phenolate radial arm to each sodium centre. The attempted synthesis of {Na(odbp)}n by direct sodiation of HOdbp yields a small quantity of the 2-benzylphenolate [{Na(Ombp)(DME)}4] (9) (-Ombp = -OC6H4-2-CH2Ph), providing a rare example of benzyl C-C bond scission.     

Controlled syntheses, characterization, and reactivity of neutral and anionic lanthanide amides supported by methylene-linked bis(phenolate) ligands

A series of neutral and anionic bis(phenolate) lanthanide amides were synthesized by general metathesis reactions, and their reactivity was explored. Protolytic ligand exchange reactions of MBMPH2 (MBMP = 2,2'-methylene bis(6-tert-butyl-4-methyl-phenolate)) with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 (TMS = SiMe3) afforded the desired bridged bis(phenolate) lanthanide chlorides [(MBMP)Ln(mu-Cl)(THF)2]2 [Ln = Nd (1), Yb (2)] in high isolated yields. These lanthanide chlorides were found to be useful precursors for the synthesis of the corresponding lanthanide derivatives. Reactions of 1 and 2 with 2 equiv of NaN(TMS)2 in THF produced the expected neutral bis(phenolate) lanthanide amido complexes (MBMP)Ln[N(TMS)2](THF)2 [Ln = Nd (3), Yb (4)] in high yields. Whereas the reactions of 1 and 2 with LiN(TMS)2 in a 1:4 molar ratio gave the anionic bis(phenolate) lanthanide amides as discrete ion-pair complexes [Li(THF)4][(MBMP)Ln{N(TMS)2}2] [Ln = Nd (5), Yb (6)] in high isolated yields. Further study revealed that 5 and 6 can also be conveniently synthesized in high yields by the direct reactions of MBMPH2 with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 in a 2:1 molar ratio, and then with 4 equiv of nBuLi. The reactivity of the neutral and anionic bis(phenolate) lanthanide amides was comparatively investigated. It was found that the insertion reactions of carbodiimide into the Ln-N bond of neutral lanthanide amido complexes 3 and 4 gave the anticipated bis(phenolate) lanthanide guanidinate complexes [(mu-O-MBMP)Nd{(iPrN)2CN(TMS)2}]2 (7) and (MBMP)Yb[(iPrN)2CN(TMS)2] (8), respectively, in high yields, whereas the similar reaction of carbodiimide with anionic amido complex 5 provided the unexpected ligand-redistributed products, and the homoleptic ion-pair bis(phenolate) neodymium complex [Li(DME)2(THF)][(MBMP)2Nd(THF)2] (9) was finally isolated as one of the products. Furthermore, the anionic bis(phenolate) lanthanide amides showed higher catalytic activity for the polymerization of epsilon-caprolactone than the neutral ones. All of the complexes were characterized with elemental analysis and IR spectra, and the definitive molecular structures of 1-3 and 5-9 were provided by single-crystal X-ray analyses.     

Hydrosilylation of dienes by yttrium hydrido complexes containing a linked amido-cyclopentadienyl ligand

The dimeric hydrido complex [Y(L)(THF)(mu-H)](2)() containing the CH(2)SiMe(2)-linked amido-cyclopentadienyl ligand L = C(5)Me(4)CH(2)SiMe(2)NCMe(3)(2-) catalyzed the hydrosilylation of 1,5-hexadiene, 1,7-octadiene and vinylcyclohexene by PhSiH(3). As demonstrated for 1,7-octadiene, the product distribution of the hydrosilylation strongly depends on the molar ratio of the reagents. In the absence of PhSiH(3), the stoichiometric reaction of with 1,5-hexadiene gave the isolable crystalline cyclopentylmethyl complex [Y(L)[CH(2)CH(CH(2))(4)](THF)]. Internal olefins such as trans-stilbene and alkynes such as tert-butylacetylene were not hydrosilylated by. trans-Stilbene was inserted into the yttrium-hydride bond of to give the 1,2-diphenylethyl complex [Y(L)[CH(CH(2)Ph)Ph](THF)]. tert-Butylacetylene reacted with to give the dimeric acetylide [Y(L)(C[triple bond]CCMe(3))](2). In an attempt to detect the monomeric hydrido species as a DME adduct [Y(L)H(DME)], complex was reacted with DME to form the sparingly soluble, dimeric 2-methoxyethoxy complex [Y(L)(mu-OCH(2)CH(2)OMe-kappaO)](2) under C-O splitting.     

Self-assembly in palladium(II) and platinum(II) chemistry: the biomimetic approach

The self-assembly of complex cationic structures by combination of cis-blocked square planar palladium(II) or platinum(II) units with bis(pyridyl) ligands having bridging amide units has been investigated. The reactions have yielded dimers, molecular triangles, and polymers depending primarily on the geometry of the bis(pyridyl) ligand. In many cases, the molecular units are further organized in the solid state through hydrogen bonding between amide units or between amide units and anions. The molecular triangle [Pt(3)(bu(2)bipy)(3)(mu-1)(3)](6+), M = Pd or Pt, bu(2)bipy = 4,4'-di-tert-butyl-2,2'-bipyridine, and 1 = N-(4-pyridinyl)isonicotinamide, stacks to give dimers by intertriangle NH.OC hydrogen bonding. The binuclear ring complexes [[Pd(LL)(mu-2)](2)](CF(3)SO(3))(4), LL = dppm = Ph(2)PCH(2)PPh(2) or dppp = Ph(2)P(CH(2))(3)PPh(2) and 2 = NC(5)H(4)-3-CH(2)NHCOCONHCH(2)-3-C(5)H(4)N, form transannular hydrogen bonds between the bridging ligands. The complexes [[Pd(LL)(mu-3)](2)](CF(3)SO(3))(4), LL = dppm or dppp, L = PPh(3), and 3 = N,N'-bis(pyridin-3-yl)-pyridine-2,6-dicarboxamide, and [[Pd(LL)(mu-4)](2)](CF(3)SO(3))(4), LL = dppm, dppp, or bu(2)bipy, L = PPh(3), and 4 = N,N'-bis(pyridin-4-yl)-pyridine-2,6-dicarboxamide, are suggested to exist as U-shaped or square dimers, respectively. The ligands N,N'-bis(pyridin-3-yl)isophthalamide, 5, or N,N'-bis(pyridin-4-yl)isophthalamide, 6, give the complexes [[Pd(LL)(mu-5)](2)](CF(3)SO(3))(4) or [[Pd(LL)(mu-6)](2)](CF(3)SO(3))(4), but when LL = dppm or dppp, the zigzag polymers [[Pd(LL)(mu-6)](x)](CF(3)SO(3))(2)(x) are formed. When LL = dppp, a structure determination shows formation of a laminated sheet structure by hydrogen bonding between amide NH groups and triflate anions of the type NH-OSO-HN.     

Synthesis and reactivity of the monomeric late-transition-metal parent amido complex [Ir(Cp*)(PMe3)(Ph)(NH2)

The late-transition-metal parent amido compound [Ir(Cp*)(PMe3)(Ph)(NH2)] (2) has been synthesized by deprotonation of the corresponding ammine complex [Ir(Cp*)(PMe3)(Ph)(NH3)][OTf] (6) with KN(SiMe3)2. An X-ray structure determination has ascertained its monomeric nature. Proton-transfer studies indicate that 2 can successfully deprotonate p-nitrophenylacetonitrile, aniline, and phenol. Crystallographic analysis has revealed that the ion pair [Ir(Cp*)(PMe3)(Ph)(NH3)][OPh] (8) exists as a hydrogen-bonded dimer in the solid state. Reactions of 2 with isocyanates and carbodiimides lead to overall insertion of the heterocumulenes into the N--H bond of the Ir-bonded amido group, demonstrating the ability of 2 to act as an efficient nucleophile. Intriguing reactivity is observed when amide 2 reacts with CO or 2,6-dimethylphenyl isocyanide. eta4-Tetramethylfulvene complexes [Ir(eta4-C5Me4CH2)(PMe3)(Ph)(L)] (L=CO (15), CNC6H3-2,6-(CH3)2 (16)) are formed in solution through displacement of the amido group by the incoming ligand followed by deprotonation of a methyl group on the Cp* ring and liberation of ammonia. Conclusive evidence for the presence of the Ir-bonded eta4-tetramethylfulvene moiety in the solid state has been provided by an X-ray diffraction study of complex 16.     

Facile synthesis of cyclopropene analogues of aluminum and an aluminum pinacolate, and the reactivity of LAl[eta(2)-C(2)(SiMe(3))(2)] toward unsaturated molecules (L=HC[(CMe)(NAr)](2), Ar=2,6-i-Pr(2)C(6)H(3))

Reduction of LAlI(2) (1) (L = HC[(CMe)(NAr)](2), Ar = 2,6-i-Pr(2)C(6)H(3)) with potassium in the presence of alkynes C(2)(SiMe(3))(2), C(2)Ph(2), and C(2)Ph(SiMe(3)) yielded the first neutral cyclopropene analogues of aluminum LAl[eta(2)-C(2)(SiMe(3))(2)] (3), LAl(eta(2)-C(2)Ph(2)) (4), and LAl[eta(2)-C(2)Ph(SiMe(3))] (5), respectively, whereas reduction of 1 in the presence of Ph(2)CO gave an aluminum pinacolate LAl[O(2)(CPh(2))(2)] (6), irrespective of the amount of Ph(2)CO employed. The unsaturated molecules CO(2), Ph(2)CO, and PhCN inserted into one of the Al-C bonds of 3 leading to ring enlargement to give novel aluminum five-membered heterocyclic systems LAl[OC(O)C(2)(SiMe(3))(2)] (7), LAl[OC(Ph)(2)C(2)(SiMe(3))(2)] (8), and LAl[NC(Ph)C(2)(SiMe(3))(2)] (9) in high yields. In contrast, 3 reacted with t-BuCN, 2,6-Trip(2)C(6)H(3)N(3) (Trip = 2,4,6-i-Pr(3)C(6)H(2)), and Ph(3)SiN(3) resulting in the displacement of the alkyne moiety to afford LAl[N(2)(Ct-Bu)(2)] (10) with an unprecedented aluminum-containing imidazole ring, and the first monomeric aluminum imides LAlNC(6)H(3)-2,6-Trip(2) (11) and LAlNSiPh(3) (12). All compounds have been characterized spectroscopically. The variable-temperature (1)H NMR studies of 3 and ESR measurements of 3 and 4 suggest that the Al-C-C three-membered-ring systems can be best described as metallacyclopropenes. The (27)Al NMR resonances of 2 and 3 are reported and compared. Molecular structures of compounds 3, 4, 6.OEt(2), 8.OEt(2), and 9 were determined by single-crystal X-ray structural analysis.     

Reactions of Li- and Yb-coordinated N,N'-bis(trimethylsilyl)-beta-diketiminates: one- and two-electron reductions, deprotonation, and C-N bond cleavage

The synthesis and characterisation of novel Li and Yb complexes is reported, in which the monoanionic beta-diketiminato ligand has been (i) reduced (SET or 2 [times] SET), (ii) deprotonated, or (iii) C-N bond-cleaved. Reduction of the lithium beta-diketiminate Li(L(R,R'))[L(R,R')= N(SiMe(3))C(R)CHC(R')N(SiMe(3))] with Li metal gave the dilithium derivative [Li(tmen)(mu-L(R,R'))Li(OEt(2))](R = R'= Ph; or, R = Ph, R[prime or minute]= Bu(t)). When excess of Li was used the dimeric trilithium [small beta]-diketiminate [Li(3)(L(R,R[prime or minute]))(tmen)](2)(, R = R'= C(6)H(4)Bu(t)-4 = Ar) was obtained. Similar reduction of [Yb(L(R,R'))(2)Cl] gave [Yb[(mu-L(R,R'))Li(thf)](2)](, R = R[prime or minute]= Ph; or, R = R'= C(6)H(4)Ph-4 = Dph). Use of the Yb-naphthalene complex instead of Li in the reaction with [Yb(L(Ph,Ph))(2)] led to the polynuclear Yb clusters [Yb(3)(L(Ph,Ph))(3)(thf)], [Yb(3)(L(Ph,Ph))(2)(dme)(2)], or [Yb(5)(L(Ph,Ph))(L(1))(L(2))(L(3))(thf)(4)] [L(1)= N(SiMe(3))C(Ph)CHC(Ph)N(SiMe(2)CH(2)), L(2)= NC(Ph)CHC(Ph)H, L(3)= N(SiMe(2)CH(2))] depending on the reaction conditions and stoichiometry. The structures of the crystalline complexes 4, 6x21/2(hexane), 5(C(6)D(6)), and have been determined by X-ray crystallography (and have been published).     

Highly trans-1,4 selective (co-)polymerization of butadiene and isoprene with quinolyl anilido rare earth metal bis(alkyl) precursors

The N-R-quinolinyl-8-amino ligands HL(1-3) (R = 2,6-(i)Pr(2)C(6)H(3) (HL(1)), 2,6-Et(2)C(6)H(3) (HL(2)), 2,6-Me(2)C(6)H(3) (HL(3))) have been prepared, which reacted readily with one equiv. of rare earth metal tris(alkyl)s to afford the corresponding bis(alkyl) complexes L(1)Y(CH(2)SiMe(3))(2)(THF) (1) and L(1-3)Lu(CH(2)SiMe(3))(2)(THF) (2-4) via alkane elimination. Contrastingly, treatment of the in situ generated neodymium tri(alkyl)s with HL(1) afforded a mono(alkyl) neodymium complex (5). Complexes 1, 2 and 5 in combination with aluminium alkyls and organoborates established homogenous ternary systems that exhibited versatile catalytic activities and trans-1,4 selectivities for the polymerization of butadiene, depending on the types of aluminium alkyl, organoborate and rare earth metal used. Furthermore, the trans-1,4 selective copolymerization of butadiene and isoprene was achieved by using the ternary system of 1/AlMe(3)/[Ph(3)C][B(C(6)F(5))(4)]. Both the kinetics of copolymerization and the thermal behavior of the copolymers were investigated.     

Bis(imino)pyridine ligand deprotonation promoted by a transient iron amide

Addition of 2 equiv of LiNMe(2) to the bis(imino)pyridine ferrous dichloride, ((i)(Pr)PDI)FeCl(2) ((i)(Pr)PDI = (2,6-(i)()Pr(2)-C(6)H(3)N=CMe)(2)C(5)H(3)N), resulted in deprotonation of the chelate methyl groups, yielding the bis(enamide)pyridine iron dimethylamine adduct, ((i)(Pr)PDEA)Fe(NHMe(2)) ((i)(Pr)PDEA = (2,6-(i)Pr(2)-C(6)H(3)NC=CH(2))(2)C(5)H(3)N). Performing a similar procedure with KN(SiMe(3))(2) in THF solution afforded the corresponding bis(THF) adduct, ((i)(Pr)PDEA)Fe(THF)(2). ((i)(Pr)PDEA)Fe(NHMe(2)) has also been prepared by addition of the free amine to the iron dialkyl complex, ((i)(Pr)PDI)Fe(CH(2)SiMe(3))(2), implicating formation of a transient iron amide that is sufficiently basic to deprotonate the bis(imino)pyridine methyl groups. Deprotonation of the amine ligand in ((i)(Pr)PDEA)Fe(NHMe(2)) has been accomplished by addition of amide bases to afford the ferrous amide-ate complexes, [((i)(Pr)PDEA)Fe(mu-NMe(2))M] (M = Li, K).     

A theoretical study of an unusual Y-shaped three-coordinate Pt complex: Pt(0) σ-disilane complex or Pt(II) disilyl complex?

The unusual Y-shaped structure of the recently reported three-coordinate Pt complex Pt[NHC(Dip)(2)](SiMe(2)Ph)(2) (NHC = N-heterocyclic carbene; Dip = 2,6-diisopropylphenyl) was considered a snapshot of the reductive elimination of disilane. A density functional theory study indicates that this structure arises from the strong trans influence of the extremely σ-donating carbene and silyl ligands. Though this complex can be understood to be a Pt(II) disilyl complex bearing a distorted geometry due to the Jahn-Teller effect, its (195)Pt NMR chemical shift is considerably different from those of Pt(II) complexes but close to those of typical Pt(0) complexes. Its Si···Si bonding interaction is ~50% of the usual energy of a Si-Si single bond. The interaction between the Pt center and the (SiMe(2)Ph)(2) moiety can be understood in terms of donation and back-donation interactions of the Si-Si σ-bonding and σ*-antibonding molecular orbitals with the Pt center. Thus, we conclude that this is likely a Pt(0) σ-disilane complex and thus a snapshot after a considerable amount of the charge transfer from disilane to the Pt center has occurred. Phenyl anion (Ph(-)) and [R-Ar](-) [R-Ar = 2,6-(2,6-iPr(2)C(6)H(3))(2)C(6)H(3)] as well as the divalent carbon(0) ligand C(NHC)(2) also provide similar unusual Y-shaped structures. Three-coordinate digermyl, diboryl, and silyl-boryl complexes of Pt and a disilyl complex of Pd are theoretically predicted to have similar unusual Y-shaped structures when a strongly donating ligand coordinates to the metal center. In a trigonal-bipyramidal Ir disilyl complex [Ir{NHC(Dip)(2)}(PH(3))(2)(SiMe(3))(2)](+), the equatorial plane has a similar unusual Y-shaped structure. These results suggest that various snapshots can be shown for the reductive eliminations of the Ge-Ge, B-B, and B-Si σ-bonds.     

Homoleptic lanthanide complexes of chelating bis(phosphanyl)amides: synthesis,structure, and ring-opening polymerization of lactones

Treatment of the bis(phosphanyl)amide (Ph2P)2NH with KH in boiling THF followed by crystallization from THF/n-pentane leads to [K(thf)n][N(PPh2)2] (n = 1.25, 1.5). Reaction of [K(thf)n][N(PPh2)2] with anhydrous yttrium or lanthanide trichlorides in a 3:1 molar ratio afforded homoleptic bis(phosphanyl)amide complexes [Ln[N(PPh2)2]3] (Ln = Y, Er) as large crystals in good yields. [Ln[N(PPh2)2]3] can also be obtained by reaction of the homoleptic bis(trimethylsilyl)amides of Group 3 metals and lanthanides [Ln[N(SiMe3)2]3] (Ln = Y, La, Nd) with three equivalents of (Ph2P)2NH in boiling toluene. The single-crystal X-ray structures of these complexes always show eta 2 coordination of the ligand. Dynamic behavior of the ligand is observed in solution and is caused by rapid exchange of the two different phosphorus atoms. [Ln[N(PPh2)2]3] was used as catalyst for the polymerization of epsilon-caprolactone. Significant differences in terms of correlation of theoretical and experimental molecular weights as well as polydispersities were observed depending on the nature of Ln. On the basis of the crystal structure of the heteroleptic complex [Lu[N(PPh2)2]3(thf)], we suggest that in the initiation step of epsilon-caprolactone polymerization the lactone adds to the lanthanide atom to form a sevenfold coordination sphere around the central atom.     

Electronic response of a (P,N)-based ligand on metal coordination

The reaction of [(THF)Li(Ph(2)PC(H)Py)] with ZnCl(2) in the presence of ZnO yields the zinc complex [Zn(3)(Ph(2)PC(H)Py)(4)O] (1). Deprotonation of the phosphane Ph(2)P(CH(2)Py) with [Fe(N(SiMe(3))(2))2] gives the iron complexes [(Ph(2)P(CH(2)Py))Fe(Ph(2)PC(H)Py)2] (2) and [Fe(Ph(2)PC(H)Py)(N(SiMe(3))(2))]2 (3), depending on the ratio of phosphane. The solid state structures of the metal complexes illustrate the coordination flexibility of the [Ph(2)C(H)Py](-)-anion. Depending on the electronic requirements of the coordinated metal the anion acts as a (P,N)-chelating amide or C-coordinating carbanion with the P- and N-heteroatoms as donor bases.     

Oxido-bridged di-, tri-, and tetra-nuclear iron complexes bearing bis(trimethylsilyl)amide and thiolate ligands

A series of di-, tri-, and tetra-nuclear iron-oxido clusters with bis(trimethylsilyl)amide and thiolate ligands were synthesized from the reactions of Fe{N(SiMe(3))(2)}(2) (1) with 1 equiv of thiol HSR (R = C(6)H(5) (Ph), 4-(t)BuC(6)H(4), 2,6-Ph(2)C(6)H(3) (Dpp), 2,4,6-(i)Pr(3)C(6)H(2) (Tip)) and subsequent treatment with O(2). The trinuclear clusters [{(Me(3)Si)(2)N}Fe](3)(μ(3)-O){μ-S(4-RC(6)H(4))}(3) (R = H (3a), (t)Bu (3b)) were obtained from the reactions of 1 with HSPh or HS(4-(t)BuC(6)H(4)) and O(2), while we isolated a tetranuclear cluster [{(Me(3)Si)(2)N}(2)Fe(2)(μ-SDpp)](2)(μ(3)-O)(2) (4) as crystals from an analogous reaction with HSDpp. Treatment of a tertrahydrofuran (THF) solution of 1 with HSTip and O(2) resulted in the formation of a dinuclear complex [{(Me(3)Si)(2)N}(TipS)(THF)Fe](2)(μ-O) (5). The molecular structures of these complexes have been determined by X-ray crystallographic analysis.     

Synthetic and structural experiments on yttrium, cerium and magnesium trimethylsilylmethyls and their reaction products with nitriles; with a note on two cerium beta-diketiminates

The yttrium, cerium and magnesium bis(trimethylsilyl)methyls [Ln[CH(SiMe3)2]3][Ln = Y (1), Ce (2)], and the known compound Mg[[CH(SiMe3)2]2 (C) and [Mg(mu-Br)[CH(SiMe3)2](OEt2)]2 (D) formed the crystalline nitrile adducts [1(NCBut)2] (5), [2(NCPh)] (6), [C(NCR)2][R = But (8), Ph (9), C6H3Me2-2,6 (10)] and [Mg(mu-Br)[CH(SiMe3)2](NCR)]2 [R = But (11), Ph (12), C6H3Me2-2,6 (13)], rather than beta-diketiminato-metal insertion products. The beta-diketiminato-cerium complex [Ce[(N(SiMe3)C(C6H4But-4))2CH][N(SiMe3)2]2] (16) was obtained from [Ce[N(SiMe3)2]3] and the beta-diketimine H[[N(SiMe3)C(C6H4But-4)]2CH]]. The cerium alkyl 2 and [Ln[CH(SiMe3)(SiMe2OMe)]3][Ln = Y (3), Ce (4)] were obtained from the appropriate lithium alkyl precursor and [Ce(OC6H2But2-2,6-Me-4)3] or LnCl3, respectively. Heating complex 3 with benzonitrile in toluene afforded 2,2-dimethyl-4,6-diphenyl-5-trimethylsilyl-1,3-diaza-2-silahexa-1,3-diene (7), a member of a new class of heterocycles. The X-ray structures of the crystalline compounds, D, [Mg[CH(SiMe3)2]2(OEt2)2], the known [Ce(Cl)[(N(SiMe3)C(Ph))2CH]2] (E) and 16 are reported. The cerium alkyl (like 1) has one close Ce...C contact for each ligand, attributed to a gamma-C-Ce agostic interaction. The Ln alkyls and have a trigonal prismatic arrangement of the chelating ligands (each of the same chirality at Calpha) around the metal. In an arene solution at 313 K exists as two isomers, as evident from detailed NMR spectroscopic experiments.     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.