Zr-Based MOFs with High Drug Loading for Adsorption Removal of Anti-Cancer Drugs: A Potential Drug Storage

A robust and highly water stable series of UiO-66-drived MOFs including UiO-66-NH₂, glycidyl methacrylate functionalized UiO-66-NH₂ (UiO-66-GMA) and ethylenediamine functionalized UiO-66-NH₂ (UiO-66-EDA) were synthesized solvothermally and studied their adsorption performances toward two anti-cancer drugs, methotrexate (MTX) and curcumin (CUR) in the case of overdose. It was found that functionalizing the surface of UiO-66-NH₂ nanoparticles with different functional groups remarkably changes the adsorption capacity and the ideal adsorption selectivity of MTX over CUR. Particularly, the UiO-66-EDA exhibited the highest adsorption capacities for both drugs, 540.78 and 423.85 mg/g for MTX and CUR, respectively, because of the strong interaction between drug molecules and adsorbent via hydrogen bonding due to the existence of different polar functional groups. The kinetics of drugs adsorption was investigated by three well-known kinetic models, which the output indicates that the adsorption of both drugs onto the synthesized MOFs follow the pseudo-second-order model. Moreover, it was found that the equilibrium adsorption results were well fitted with the Langmuir isotherm models, revealing that the adsorption of both drugs onto the synthesized MOFs is a monolayer adsorption process. Further investigation illustrated that the synthesized MOFs could be easily activated and reused after four successive adsorption–desorption cycles. The output of the present work is of main important for biomedical and environmental applications of MOFs as an outstanding adsorbent for adsorption removal of hazardous drugs from contaminated aqueous solutions.     

新型金属有机气凝胶的合成、 表征及气体吸附性能

利用高稳定性的UiO-66系列金属有机骨架多孔材料制备金属有机气凝胶材料, 制得的UiO-66系列金属有机气凝胶材料具有多级孔结构和较高的比表面积, 在气体吸附分离领域具有较大应用潜力. 气体吸附实验结果表明, UiO-66-NH₂金属有机气凝胶材料具有极佳的CO₂吸附性能和CO₂/CH₄分离性能, 通过理想吸附溶液理论计算得出其吸附选择性高达18.3.     

全氟酰基合成后修饰UiO-66用于吸附有机污染物

以三氟乙酰基和五氟丙酰基为修饰官能团,通过合成后修饰（PSM）的方法对金属-有机骨架（MOFs）改性,得到疏水骨架材料（UiO-66-F1和UiO-66-F2）。2个骨架材料均显示出亲油性,这说明它们是油性溶剂潜在的吸附材料。修饰后MOFs材料的结晶性、稳定性和多孔性较UiO-66-NH₂仅有微小降低。UiO-66-F1和UiO-66-F2的Brunauer-Emmett-Teller（BET）比表面积分别为810和610 m²·g^-1。骨架材料因其合适的孔大小和疏水微环境,更容易吸附水中的有机污染物。此外,改性后材料对多种有机溶剂的吸附量显著提升,在经过10次的循环吸附后吸附量没有明显降低,具有出色的循环稳定性。     

Multivariate Modulation of the Zr MOF UiO-66 for Defect-Controlled Combination Anticancer Drug Delivery

Metal–organic frameworks (MOFs) are emerging as leading candidates for nanoscale drug delivery, as a consequence of their high drug capacities, ease of functionality, and the ability to carefully engineer key physical properties. Despite many anticancer treatment regimens consisting of a cocktail of different drugs, examples of delivery of multiple drugs from one MOF are rare, potentially hampered by difficulties in postsynthetic loading of more than one cargo molecule. Herein, we report a new strategy, multivariate modulation, which allows incorporation of up to three drugs in the Zr MOF UiO-66 by defect-loading. The drugs are added to one-pot solvothermal synthesis and are distributed throughout the MOF at defect sites by coordination to the metal clusters. This tight binding comes with retention of crystallinity and porosity, allowing a fourth drug to be postsynthetically loaded into the MOFs to yield nanoparticles loaded with cocktails of drugs that show enhancements in selective anticancer cytotoxicity against MCF-7 breast cancer cells in vitro. We believe that multivariate modulation is a significant advance in the application of MOFs in biomedicine, and anticipate the protocol will also be adopted in other areas of MOF chemistry, to easily produce defective MOFs with arrays of highly functionalised pores for potential application in gas separations and catalysis.     

A Bio-inspired Nano-pocket Spatial Structure for Targeting Uranyl Capture

Biology has evolved excellent spatial structures for high-selectivity and high-affinity capture of heavy metals. Inspired by the spatial structure of the superb-uranyl binding protein SUP, we mimic the spatial structure of SUP in metal–organic frameworks (MOFs). The MOF UiO-66-3C4N fabricated by introducing 4-aminoisophthalic acid into UiO-66 shows high uranyl adsorption capacity both in simulated seawater and in natural seawater. In natural seawater, UiO-66-3C4N exhibits 17.03 times higher uranium extraction capacity than that of vanadium, indicating the high selectivity of the adsorbent. The EXAFS analysis and DFT calculation reveal that UiO-66-3C4N forms smaller nano-pocket for uranyl capture than that of SUP protein, which can both restrict the entrance of the other interfering ions with larger size and reinforce the binding by increasing the coordination interaction, and therefore qualify the nano-pocket with high affinity and high selectivity to uranyl.     

高稳定性金属有机骨架UiO-66的合成与应用

金属有机骨架(metal-organic frameworks,MOFs)是一种由金属中心与有机配体自组装而成的、具有三维网状有序孔结构的新型多孔晶体材料,其具有超高的比表面积、种类和结构多样性、可化学功能化等特点,在多个研究领域显示出了潜在的应用前景,已成为当前化学、材料学科的研究热点之一。 然而大多数MOFs材料的稳定性较差,极大地束缚了MOFs材料的发展。 以Zr为金属中心,对苯二甲酸为有机配体的UiO-66具有较好的热稳定性,结构可在500 ℃保持稳定,并且其还具有很高的耐酸性和一定的耐碱性,引起了人们的关注。 本文主要综述了UiO-66在合成调控、功能化合成和后改性方面的研究现状,以及其在吸附和催化等领域的应用前景。     

Effect of NH2 and CF3 functionalization on the hydrogen sorption properties of MOFs

The hydrogen adsorption capacity and heat of adsorption at 77 K have been evaluated for several porous metal terephthalate MOFs (MIL-53(Fe), MIL-125(Ti) and UiO-66(Zr)), as well as in their -NH(2) and -(CF(3))(2) functionalized isoreticular structures. The capacity of hydrogen is basically related to the textural properties of the solids and not to their composition. The heats of adsorption at low coverage are on the whole close to those usually reported for MOFs (6-7 kJ mol(-1)), except for the UiO-66(Zr) and MIL-53(Fe)-(CF(3))(2) analogues, whereas the presence of Lewis acid sites and/or a confinement effect enhances significantly the strength of interaction with hydrogen.     

Enhanced stability and CO2 affinity of a UiO-66 type metal-organic framework decorated with dimethyl groups

A new dimethyl-functionalized UiO-66 framework exhibits higher physicochemical stability, larger CO(2) uptake, and an enhanced heat of adsorption in comparison with what was previously observed for analogous UiO-66 type MOFs.     

S-型分级多孔CdS/UiO-66光催化剂的构建实现4-硝基苯胺的高效还原

金属有机框架(MOFs)材料因其高孔隙率特性在气体吸附分离、药物传递、催化等领域具有广泛应用.近年来,将功能化纳米颗粒(NPs)封装在MOFs中的研究在催化领域引起了科学家的兴趣.其中,较大比表面积的MOFs可以为NPs的分散和固定提供理想的平台,而NPs反过来可以为催化反应引入更多的活性位点,提高催化效率.然而,MOFs本身的孔隙常局限于微孔(<2 nm),这极大地限制了NPs在MOFs孔隙中的有效封装.因此,设计并制备含有介孔(2?50 nm)或大孔(>50 nm)的多级孔MOFs,揭示其孔径大小对复杂NPs/MOFs复合催化剂催化性能的影响具有重要意义.然而,具有不同孔径MOFs的可控制备具有巨大挑战性,MOFs孔径如何影响和调控NPs/MOFs复合材料催化活性是一个悬而未决的科学问题.本文结合金属离子刻蚀法和调控配体法设计了两种具有不同孔径(大孔和介孔)的UiO-66,并系统研究了孔径大小对CdS NPs的分布以及所形成的复合催化剂CdS/UiO-66的催化性能的影响及机制.我们首先阐明了UiO-66调控孔径后影响和修饰CdS NPs的空间分布:对于具有开放大孔结构的UiO-66纳米笼,CdS NPs倾向于自发沉积在UiO-66纳米笼内壁上.相比之下,CdS NPs则主要附着于介孔UiO-66的外表面.据此,具有大孔和介孔结构的CdS/UiO-66表现出不同的光催化性能.以光还原4-硝基苯胺反应为例,大孔CdS/UiO-66的反应速率常数是介孔和实心样品的3?13倍,且优于许多文献报道的CdS复合材料催化剂,表明大孔结构在制备高效复合催化材料上的潜在优势.通过光吸收能力、能级结构等计算表征,该催化剂的电子空穴对传输遵循S-型异质结光催化机制;大孔CdS/UiO-66具有较高光催化活性可归因于纳米笼对NPs的限域效应,即CdS被限制在UiO-66纳米笼内,缩短了催化剂与底物之间的电子传输距离;空心纳米笼结构则保护其内部的CdS NPs免受光腐蚀的影响,进而获得较高的催化效率和循环稳定性.可见,本文提出了一种结合离子刻蚀法和调控配体法获得具有不同孔径MOFs的有效策略,阐明了调控MOFs的孔径尺寸可以影响NPs的空间分布,是制约其性能的关键因素,有望为高效催化剂的设计及催化机制的研究提供新的依据.     

Chitosan/UiO-66 composites as high-performance adsorbents for the removal of methyl orange in aqueous solution

UiO-66 and chitosan/UiO-66 composites were successfully synthesized by varying the mass addition of chitosan which were 0%, 2.5%, 5%, 10%, and 20% of the mass of UiO-66, denoted as UiO-66, Cs(2.5)/UiO-66, Cs(5)/UiO-66, Cs(10)/UiO-66, and Cs(20)/UiO-66, respectively. UiO-66 was modified with chitosan using the impregnation process. The X-ray diffraction patterns of the synthesized materials showed characteristic peaks at 2θ of 7.25° and 8.39°, which matched to that of the reported UiO-66. In addition, the Fourier transform infrared spectroscopy spectra of the materials showed absorption bands at the same wavenumber as UiO-66 and chitosan previously reported. The surface morphology of UiO-66 observed from scanning electron microscopy images was in the form of agglomerated small cube particles, where the smaller particles were observed for Cs(10)/UiO-66. From the N₂ adsorption isotherms, it was found that the Brunauer-Emmett-Teller surface areas of UiO-66, Cs(5)/UiO-66, and Cs(10)/UiO-66 materials were 825.7 m²/g, 835.4 m²/g, and 882.2 m²/g, respectively. The results of the study on adsorption of methyl orange in aqueous solutions showed that Cs(5)/UiO-66 had the highest adsorption capacity of 370.37 mg/g and followed the pseudo–second-order adsorption kinetic with a Langmuir isotherm model.     

UiO-67-Sal-CuCl2在空气中催化芳香醇的选择性氧化

利用水热法一步合成了金属有机骨架(MOFs)材料UiO-67-Sal, 并将3种铜盐固定在其表面, 研究了3种铜MOFs材料催化芳香醇选择性氧化的性能. 结果表明, UiO-67-Sal-CuCl₂催化剂对芳香醇选择性氧化反应具有良好的催化活性, 且在重复使用4次后, 依然保持较好的催化效果.     

UiO-66-NH_(2)@纤维素复合气凝胶用于保健品中西地那非的固相萃取北大核心CSCD

研究建立了一种基于UiO-66-NH_(2)@纤维素复合气凝胶的高灵敏度固相萃取新方法,与高效液相色谱法联用用于保健品中西地那非的检测。先将纤维素进行醛基和酰肼基的功能化,然后将两种功能化的纤维素通过交联并负载UiO-66-NH_(2)形成复合气凝胶。将此复合气凝胶作为固相萃取的吸附剂使用时,易于收集且不需要外加磁场或者抽真空的辅助作用,操作简单。研究对制备所得的UiO-66-NH_(2)@纤维素复合气凝胶进行了X-射线粉末衍射、扫描电镜、红外光谱和N_(2)吸附等表征,结果显示UiO-66-NH_(2)成功负载于气凝胶的孔道中,纤维素气凝胶掺杂了UiO-66-NH_(2)之后其孔道结构变得规整,并且比表面积增大。研究优化了复合气凝胶中UiO-66-NH_(2)的负载量对萃取的影响,高比例的负载量有利于西地那非的富集,并且最高的负载率为50%。研究优化了影响西地那非富集效率的实验条件,包括溶液pH、萃取时间、洗脱剂类型、洗脱时间、洗脱体积和离子强度。采用安捷伦Zorbax Eclipse Plus C18色谱柱(150 mm×4.6 mm,5μm)进行分离,以含0.1 mol/L三乙胺的磷酸盐水溶液(pH=6.50)-乙腈(30∶70,v/v)为流动相进行洗脱,检测波长为292 nm。在最佳的萃取条件下(pH为9.0,萃取时间为60 min,洗脱剂为乙腈,洗脱液体积为3×2 mL,洗脱时间为40 min),该分析方法的线性范围为10~2000 ng/mL(相关系数R^(2)=0.9949),检出限(LOD,S/N=3)为2.85 ng/mL,富集因子为59.17。将该方法用于保健品中西地那非的萃取,所得回收率为74.93%~89.12%,相对标准偏差为2.8%~5.3%,表明了方法的回收率和精密度良好,说明了该方法具有应用于保健品中西地那非日常检测的潜力。     

Spray-Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO-66-NCS MOF was formed by postsynthetic modification of UiO-66-NH₂. The UiO-66-NCS MOFs displays a circa 20-fold increase in activity against the chemical warfare agent simulant dimethyl-4-nitrophenyl phosphate (DMNP) compared to UiO-66-NH₂, making it the most active MOF materials using a validated high-throughput screening. The −NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine-terminated polypropylene polymers (Jeffamines) through a facile room-temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray-coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray-coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

金属有机框架材料吸附性能应用的研究

金属有机框架材料(MOFs)是一种多孔聚合物材料,其相关研究近年来取得迅速发展。MOFs是以金属离子为中心,桥连的有机配体作为支撑经延伸形成的一类具有周期性网络结构的晶态多孔材料[1]。由于其较强的功能性、较高的比表面积、超高的孔隙率以及可调控的孔道结构[2],MOFs在储气、分离、催化、载药和光学等领域受到了极大的重视,并具有广泛的应用前景。本文从MOFs材料的结构设计出发,介绍近几年MOFs材料在能源气体(H2、CH4)的储存,H2S、CO2、有机气体分子的捕集以及医学领域(对于一些药物的吸附装载)的研究进展,并对MOFs材料在应用上存在的问题进行了阐述,对其未来的发展趋势作出展望。     

Metal-organic framework as a multi-component sensor for detection of Fe3+, ascorbic acid and acid phosphatase

In this research,a hydroxyl group functionalized metal-organic framework(MOF),UiO-66-(OH)₂,was synthesized as a "on-off-on" fluore scent switching nanoprobe for highly sensitive and selective detection of Fe³⁺,ascorbic acid(AA) and acid phosphatase(ACP).UiO-66-(OH)₂ emits yellow-green light under ultraviolet light,when Fe³⁺ was added,Fe³⁺ was chelated with hydroxyl group,the electrons in the excited state S_1 of the MOF transferred to the half-filled 3 d orbits of Fe³⁺,resulting in fluorescence quenching because of the nonradiative electron/hole recombination annihilation.AA could reduce Fe³⁺ to Fe²⁺,which can destroy the electron transfer between UiO-66-(OH)₂ and Fe³⁺ after AA adding,resulted in nonoccurrence of the nonradiative electron transfer,leading to the recovery of UiO-66-(OH)₂ fluorescence intensity.The probe can also be used to detect ACP based on the enzymolysis of 2-phospho-L-ascorbic acid(AAP) to produce AA.Benefitting from the hydroxyl group and the characteristics of UiO-66,including the high porosity and large surface area,the developed UiO-66-(OH)₂ showed extensive advantages as a fluorescent probe for detection of multi-component,such as high sensitivity and selectivity,colorimetric detection,fast response kinetics and easy to operate,economical and secure.This is the first time to use active group functionalized MOFs as a multicomponent sensor for these three substances detection.     

The Carboxyl Functionalized UiO-66-(COOH)2 for Selective Adsorption of Sr2+

Efficient and selective removal of ⁹⁰Sr is an important process for the safe use of nuclear energy. Herein, we investigate and assess the Sr²⁺ adsorption properties of a metal-organic framework UiO-66-(COOH)₂ functionalized by non-bonded carboxylic groups. This MOF is an exciting class of free carboxylic functionalized MOFs that combine chemical stability with gas sorption, dye elimination, and conductivity. Specifically, we show that uniformly distributed carboxyl and water stability make it accessible for loading Sr²⁺ without structural changes. The FTIR spectroscopy, PXRD analysis, XPS, and SEM-EDS studies show excellent stability as well as the strong affinity between -COOH active site and Sr²⁺. This strong coordination interaction guarantees a high adsorption capacity of 114 mg g⁻¹ within 5 h (pH 5 and 298 K). Combined kinetic and thermodynamic studies show that the surface complexation is strong chemisorption and cost-effective spontaneous process (ΔG = −5.49 kJ mol⁻¹~−2.16 kJ mol⁻¹). The fact that UiO-66-(COOH)₂ not only possesses a high adsorption capacity, but also enables selectivity to Sr²⁺ in the presence of similar radius ions Na⁺ and K⁺, prefigures its great potential for the practical treatment of radioactive Sr²⁺ in polluted water.     

Synthesis and Mechanical Properties of sub 5-μm PolyUiO-66 Thin Films on Gold Surfaces

Metal-organic framework (MOF) thin films currently lack the mechanical stability needed for electronic device applications. Polymer-based metal-organic frameworks (polyMOFs) have been suggested to provide mechanical advantages over MOFs, however, the mechanical properties of polyMOFs have not yet been characterized. In this work, we developed a method to synthesize continuous sub-5 μm polyUiO-66(Zr) films on Au substrates, which allowed us to undertake initial mechanical property investigations. Comparisons between polyUiO-66 and UiO-66 thin films determined polyUiO-66 thin films exhibit a lower modulus but similar hardness to UiO-66 thin films. The initial mechanical characterization indicates that further development is needed to leverage the mechanical property advantages of polyMOFs over MOFs. Additionally, the demonstration in this work of a continuous surface-supported polyUiO-66 thin film enables utilization of this emerging class of polyMOF materials in sensors and devices applications.     

Synthesis of UiO-66 with addition of HKUST-1 for enhanced adsorption of RBBR dye

Toxic dye removal, one of the most serious and common industrial pollutants released into natural water, is a critical issue for modern civilization. In this study, a series of UiO-66 composites was synthesized with addition of HKUST-1 using solvothermal method, which was used to remove RBBR dye. The structure, morphology and surface area of the composites were studied by several analyses. HK(5)/UiO-66 possessed a specific surface area of 557.63 m²/g and showed an adsorption capacity of 400 mg/g, higher than that of UiO-66 (261.92 mg/g) with a contact time of 50 min. Several adsorption parameters that influenced RBBR removal efficiency were investigated, such as pH, initial dye concentrations, and temperature. All the composites followed pseudo-first order kinetics and Langmuir isotherm adsorption. Moreover, the adsorption process occurred exothermically and spontaneously, indicating that the adsorption process was advantageous in terms of energy. The possible adsorption mechanism and cost analysis of the adsorbent were also studied in detail.     

Selectivity Control in the Direct CO Esterification over Pd@UiO-66: The Pd Location Matters

The selectivity control of Pd nanoparticles (NPs) in the direct CO esterification with methyl nitrite toward dimethyl oxalate (DMO) or dimethyl carbonate (DMC) remains a grand challenge. Herein, Pd NPs are incorporated into isoreticular metal–organic frameworks (MOFs), namely UiO-66-X (X=-H, -NO₂, -NH₂), affording Pd@UiO-66-X, which unexpectedly exhibit high selectivity (up to 99 %) to DMC and regulated activity in the direct CO esterification. In sharp contrast, the Pd NPs supported on the MOF, yielding Pd/UiO-66, displays high selectivity (89 %) to DMO as always reported with Pd NPs. Both experimental and DFT calculation results prove that the Pd location relative to UiO-66 gives rise to discriminated microenvironment of different amounts of interface between Zr-oxo clusters and Pd NPs in Pd@UiO-66 and Pd/UiO-66, resulting in their distinctly different selectivity. This is an unprecedented finding on the production of DMC by Pd NPs, which was previously achieved by Pd(II) only, in the direct CO esterification.     

Synergy of photocatalytic reduction and adsorption for boosting uranium removal with PMo12/UiO-66 heterojunction

In this work, we proposed a new U(VI) removal strategy combining adsorption and photocatalytic reduction by the PMo₁₂/UiO-66 heterojunctions. The PMo₁₂ has been encapsulated in the cavities of UiO-66 by a one-step hydrothermal method, and the PMo₁₂/UiO-66 exhibited high adsorption capacity and photocatalytic activity. The maximal theoretical sorption capacity of U(VI) on 15% PMo₁₂/UiO-66 reached 225.36 mg/g and the photoreduction rate of 15% PMo₁₂/UiO-66 is about thirty times as much as UiO-66. Under the light irradiation, the photogenerated electrons rapidly transport from UiO-66 to PMo₁₂, and the photo-generated electrons could efficiently reduce the pre-enriched U(VI) to U(IV). This work provides new insights into remediation of the radioactive environment.