A Novel Methacryloyl Chitosan Hydrogel Microneedles Patch with Sustainable Drug Release Property for Effective Treatment of Psoriasis

Psoriasis is a chronic and recurrent skin disease that often requires long-term treatment, and topical transdermal drug delivery can reduce systemic side effects. However, it is still a challenge in efficient transdermal drug delivery for psoriasis treatment due to low penetration efficiency of most drugs and the abnormal skin conditions of psoriasis patients. Here, a safe and effective methacryloyl chitosan hydrogel microneedles (CSMA hMNs) patch is developed and served as a sustained drug release platform for the treatment of psoriasis. By systematically optimizing the CSMA preparation, CSMA hMNs with excellent morphological characteristics and strong mechanical properties (0.7 N needle⁻¹) are prepared with a concentration of only 3% (w/v) CSMA. As a proof-of-concept, methotrexate (MTX) and nicotinamide (NIC) are loaded into CSMA hMNs patch, which can produce a sustained drug release of 80% within 24 h in vitro. In vivo experiments demonstrated that the CSMA hMNs patch can effectively inhibit the skin thickening and spleen enlargement of psoriatic mice and has a good biosafety profile at sufficient therapeutic doses. This study provides a new idea for the preparation of hMN systems using modified CS or other biocompatible materials and offers an effective therapeutic option for psoriasis treatment.     

A Practical Approach for the In Vitro Safety and Efficacy Assessment of an Anti-Ageing Cosmetic Cream Enriched with Functional Compounds

(1) Background: Cosmeceuticals are topical products applied to human skin to prevent skin ageing and maintain a healthy skin appearance. Their effectiveness is closely linked to the compounds present in a final formulation. In this article, we propose a panel of in vitro tests to support the efficacy assessment of an anti-ageing cream enriched with functional compounds. (2) Methods: biocompatibility and the irritant effect were evaluated on reconstructed human epidermis (RHE) and corneal epithelium (HCE) 3D models. After a preliminary MTT assay, normal human dermal fibroblasts (NHDF) and keratinocytes (HaCaT) were used to evaluate the extracellular matrix (ECM) protein synthesis, and interleukin-6 (IL-6) and metalloproteinase-1 (MMP-1) production. (3) Results: data collected showed good biocompatibility and demonstrated the absence of the irritant effect in both 3D models. Therefore, we demonstrated a statistical increase in collagen and elastin productions in NHDF cells. In HaCaT cells, we highlighted an anti-inflammatory effect through a reduction in IL-6 levels in inflammatory stimulated conditions. Moreover, the reduction of MMP-1 production after UV-B radiation was demonstrated, showing significant photo-protection. (4) Conclusion: a multiple in vitro assays approach is proposed for the valid and practical assessment of the anti-ageing protection, anti-inflammatory and biocompatible claims that can be assigned to a cosmetic product containing functional compounds.     

3D skin models along with skin-on-a-chip systems: A critical review

Skin is the largest organ in human body, and it plays an important role in regulating physiological microenvironments and acts as a barrier to protect human body from harmful intrusions. The demand for fully functional skin models(also called skin equivalents, SE) in an in-vivo mimicking culturing microenvironment has been increased dramatically due to the fast development in skin disease treatments and skin care products. Owing to the emerging of the concept and technology of organ-on-chips alo...     

Enhanced Cytosolic Delivery and Release of CRISPR/Cas9 by Black Phosphorus Nanosheets for Genome Editing

A biodegradable two‐dimensional (2D) delivery platform based on loading black phosphorus nanosheets (BPs) with Cas9 ribonucleoprotein engineered with three nuclear localization signals (NLSs) at C terminus (Cas9N3) is successfully established. The Cas9N3‐BPs enter cells effectively via membrane penetration and endocytosis pathways, followed by a BPs biodegradation‐associated endosomal escape and cytosolic releases of the loaded Cas9N3 complexes. The Cas9N3‐BPs thus provide efficient genome editing and gene silencing in vitro and in vivo at a relatively low dose as compared with other nanoparticle‐based delivery platforms. This biodegradable 2D delivery platform offers a versatile cytosolic delivery approach for CRISPR/Cas9 ribonucleoprotein and other bioactive macromolecules for biomedical applications.     

Evaluation of Sparfloxacin Distribution by Mass Spectrometry Imaging in a Phototoxicity Model

Mass spectrometry imaging (MSI) was applied to samples from mouse skin and from a human in vitro 3D skin model in order to assess its suitability in the context of photosafety evaluation. MSI proved to be a suitable method for the detection of the model compound sparfloxacin in biological tissues following systemic administration (oral gavage, 100 mg/kg) and subsequent exposure to simulated sunlight. In the human in vitro 3D skin model, a concentration-dependent increase as well as an irradiation-dependent decrease of sparfloxacin was observed. The MSI data on samples from mouse skin showed high signals of sparfloxacin 8 h after dosing. In contrast, animals irradiated with simulated sunlight showed significantly lower signals for sparfloxacin starting already at 1 h postirradiation, with no measurable intensity at the later time points (3 h and 6 h), suggesting a time- and irradiation-dependent degradation of sparfloxacin. The acquisition resolution of 100 μm proved to be adequate for the visualization of the distribution of sparfloxacin in the gross ear tissue samples, but distinct skin compartments were unable to be resolved. The label-free detection of intact sparfloxacin was only the first step in an attempt to gain a deeper understanding of the phototoxic processes. Further work is needed to identify the degradation products of sparfloxacin implicated in the observed inflammatory processes in order to better understand the origin and the mechanism of the phototoxic reaction. Figure

?     

3D Bioprinting of Tissue/Organ Models

In vitro tissue/organ models are useful platforms that can facilitate systematic, repetitive, and quantitative investigations of drugs/chemicals. The primary objective when developing tissue/organ models is to reproduce physiologically relevant functions that typically require complex culture systems. Bioprinting offers exciting prospects for constructing 3D tissue/organ models, as it enables the reproducible, automated production of complex living tissues. Bioprinted tissues/organs may prove useful for screening novel compounds or predicting toxicity, as the spatial and chemical complexity inherent to native tissues/organs can be recreated. In this Review, we highlight the importance of developing 3D in vitro tissue/organ models by 3D bioprinting techniques, characterization of these models for evaluating their resemblance to native tissue, and their application in the prioritization of lead candidates, toxicity testing, and as disease/tumor models.     

The Optimization of a Novel Hydrogel—Egg White-Alginate for 2.5D Tissue Engineering of Salivary Spheroid-Like Structure

Hydrogels have been used for a variety of biomedical applications; in tissue engineering, they are commonly used as scaffolds to cultivate cells in a three-dimensional (3D) environment allowing the formation of organoids or cellular spheroids. Egg white-alginate (EWA) is a novel hydrogel which combines the advantages of both egg white and alginate; the egg white material provides extracellular matrix (ECM)-like proteins that can mimic the ECM microenvironment, while alginate can be tuned mechanically through its ionic crosslinking property to modify the scaffold’s porosity, strength, and stiffness. In this study, a frozen calcium chloride (CaCl₂) disk technique to homogenously crosslink alginate and egg white hydrogel is presented for 2.5D culture of human salivary cells. Different EWA formulations were prepared and biologically evaluated as a spheroid-like structure platform. Although all five EWA hydrogels showed biocompatibility, the EWA with 1.5% alginate presented the highest cell viability, while EWA with 3% alginate promoted the formation of larger size salivary spheroid-like structures. Our EWA hydrogel has the potential to be an alternative 3D culture scaffold that can be used for studies on drug-screening, cell migration, or as an in vitro disease model. In addition, EWA can be used as a potential source for cell transplantation (i.e., using this platform as an ex vivo environment for cell expansion). The low cost of producing EWA is an added advantage.     

Flexible Conductive Decellularized Fish Skin Matrix as a Functional Scaffold for Myocardial Infarction Repair

Engineering cardiac patches are proven to be effective in myocardial infarction (MI) repair, but it is still a tricky problem in tissue engineering to construct a scaffold with good biocompatibility, suitable mechanical properties, and solid structure. Herein, decellularized fish skin matrix is utilized with good biocompatibility to prepare a flexible conductive cardiac patch through polymerization of polydopamine (PDA) and polypyrrole (PPy). Compared with single modification, the double modification strategy facilitated the efficiency of pyrrole polymerization, so that the patch conductivity is improved. According to the results of experiments in vivo and in vitro, the scaffold can promote the maturation and functionalization of cardiomyocytes (CMs). It can also reduce the inflammatory response, increase local microcirculation, and reconstruct the conductive microenvironment in infarcted myocardia, thus improving the cardiac function of MI rats. In addition, the excellent flexibility of the scaffold, which enables it to be implanted in vivo through “folding-delivering-re-stretehing” pathway, provides the possibility of microoperation under endoscope, which avoids the secondary damage to myocardium by traditional thoracotomy for implantation surgery.     

Evaluation of Cell‐Penetrating Peptides Using Microfluidic In Vitro 3D Brain Endothelial Barrier

In drug delivery to the human brain, blood vessels are a significant hurdle because they restrict the entry of most solutes to protect brain. To overcome this hurdle, an in vitro 3D model for brain endothelial barrier is developed using a microfluidic device with hydrogel providing a 3D extracellular matrix scaffold. Using the model, peptides known to utilize receptor‐mediated transcytosis are verified, which has been one of the most promising mechanisms for brain‐specific penetration. The cytotoxicity and cellular damage to the peptide are investigated and the receptor‐mediated transcytosis and brain endothelial specific penetrating abilities of the peptides in a quantitative manner are demonstrated. As a preclinical test, applying the quantification assays conducted in this study are suggested, including the penetrating ability, cytotoxicity, endothelial damage, and receptor specificity. Using this microfluidic device as an in vitro platform for evaluating various brain targeting drugs and drug carrier candidates is also proposed.     

Interaction between vitamin D receptor and vitamin D ligands: two-dimensional alanine scanning mutational analysis

We present a new method to investigate the details of interaction between vitamin D nuclear receptor (VDR) and various ligands, namely a two-dimensional alanine scanning mutational analysis. In this method, the transactivation of various ligands is studied in conjunction with a series of alanine scanning mutations of the residues lining the ligand binding pocket (LBP) of VDR, and the complete set of results is profiled in a patch table. We investigated examples from four structurally diverse groups of known VDR ligands: the native vitamin D hormone and two compounds with the same side chain configuration; four 20-epi compounds; three 19-nor compounds; and two nonsecosteroids. The patch table of the results indicates characteristics of each group in terms of its interaction with 18 LBP residues. We demonstrate the validity of this approach by application to docking studies of the two nonsecosteroids.     

Microneedle arrays permit enhanced intradermal delivery of a preformed photosensitizer

Silicon microneedle (MN) arrays were used to puncture excised murine and porcine skin in vitro and transdermal and intradermal delivery of meso-tetra ( N -methyl-4-pyridyl) porphine tetra tosylate (TMP) investigated using topical application of a bioadhesive patch containing 19 mg TMP cm⁻². Animal studies, using nude mice, were then conducted to investigate the in vivo performance of the bioadhesive patch following MN puncture of skin. MN puncture significantly enhanced both intradermal and transdermal delivery of TMP in vitro , though the total amounts of drug delivered (25.22% into porcine skin and 0.07% across murine skin) were still quite small in each case. Notwithstanding this, in vivo experiments showed that MN puncture was capable of permitting a prolonged increase in TMP fluorescence at the site of application. Importantly, fluorescence was negligible at distant sites, meaning systemic delivery of the drug was not sufficient to induce TMP accumulation other than at the application site. In this study we have conclusively demonstrated proof of principle; MN puncture allows true intradermal delivery of a preformed photosensitizer in animal skin models in vitro and in vivo . Importantly, transdermal delivery was much reduced in each case. Increasing MN density would allow increased amounts of photosensitizer to be delivered. However, as MNs create aqueous pores in the stratum corneum, a preformed photosensitizer must possess at least some degree of water solubility in order to permit enhanced intradermal delivery in this way. We believe that use of MN array technology in this way has the potential to significantly improve topical photodynamic therapy of skin tumors.     

The Human Host‐Defense Peptide Cathelicidin LL‐37 is a Nanomolar Inhibitor of Amyloid Self‐Assembly of Islet Amyloid Polypeptide (IAPP)

Amyloid self‐assembly of islet amyloid polypeptide (IAPP) is linked to pancreatic inflammation, β‐cell degeneration, and the pathogenesis of type 2 diabetes (T2D). The multifunctional host‐defence peptides (HDPs) cathelicidins play crucial roles in inflammation. Here, we show that the antimicrobial and immunomodulatory polypeptide human cathelicidin LL‐37 binds IAPP with nanomolar affinity and effectively suppresses its amyloid self‐assembly and related pancreatic β‐cell damage in vitro. In addition, we identify key LL‐37 segments that mediate its interaction with IAPP. Our results suggest a possible protective role for LL‐37 in T2D pathogenesis and offer a molecular basis for the design of LL‐37‐derived peptides that combine antimicrobial, immunomodulatory, and T2D‐related anti‐amyloid functions as promising candidates for multifunctional drugs.     

Microfluidic three-dimensional biomimetic tumor model for studying breast cancer cell migration and invasion in the presence of interstitial flow

Cell migration and invasion are critical steps in cancer metastasis, which are the major cause of death in cancer patients. Tumor-associated macrophages(TAMs) and interstitial flow(IF) are two important biochemical and biomechanical cues in tumor microenvironment, play essential roles in tumor progression. However, their combined effects on tumor cell migration and invasion as well as molecular mechanism remains largely unknown. In this work, we developed a microfluidic-based 3 D breast cancer model by co-culturing tumor aggregates, macrophages, monocytes and endothelial cells within 3 D extracellular matrix in the presence of IF to study tumor cell migration and invasion. On the established platform, we can precisely control the parameters related to tumor microenvironment and observe cellular responses and interactions in real-time. When co-culture of U937 with human umbilical vein endothelial cells(HUVECs) or MDA-MB-231 cells and tri-culture of U937 with HUVECs and MDA-MB-231 cells, we found that mesenchymal-like MDA-MB-231 aggregates activated the monocytes to TAM-like phenotype macrophages. MDA-MB-231 cells and IF simultaneously enhanced the macrophages activation by the stimulation of colony-stimulating factor 1(CSF-1). The activated macrophages and IF further promoted vascular sprouting via vascular endothelial growth factor(VEGFα) signal and tumor cell invasion. This is the first attempt to study the interaction between macrophages and breast cancer cells under IF condition. Taken together, our results provide a new insight to reveal the important physiological and pathological processes of macrophages-tumor communication. Moreover, our established platform with a more mimetic 3 D breast cancer model has the potential for drug screening with more accurate results.     

Oxygen consumption rate of cells in 3D culture: the use of experiment and simulation to measure kinetic parameters and optimise culture conditions

Understanding the basal O(2) and nutrient requirements of cells is paramount when culturing cells in 3D tissue models. Any scaffold design will need to take such parameters into consideration, especially as the addition of cells introduces gradients of consumption of such molecules from the surface to the core of scaffolds. We have cultured two cell types in 3D native collagen type I scaffolds, and measured the O(2) tension at specific locations within the scaffold. By changing the density of cells, we have established O(2) consumption gradients within these scaffolds and using mathematical modeling have derived rates of consumption for O(2). For human dermal fibroblasts the average rate constant was 1.19 × 10(-17) mol cell(-1) s(-1), and for human bone marrow derived stromal cells the average rate constant was 7.91 × 10(-18) mol cell(-1) s(-1). These values are lower than previously published rates for similar cells cultured in 2D, but the values established in this current study are more representative of rates of consumption measured in vivo. These values will dictate 3D culture parameters, including maximum cell-seeding density and maximum size of the constructs, for long-term viability of tissue models.     

Perfusion-based microfluidic device for three-dimensional dynamic primary human hepatocyte cell culture in the absence of biological or synthetic matrices or coagulants

We describe a perfusion-based microfluidic device for three-dimensional (3D) dynamic primary human hepatocyte cell culture. The microfluidic device was used to promote and maintain 3D tissue-like cellular morphology and cell-specific functionality of primary human hepatocytes by restoring membrane polarity and hepatocyte transport function in vitro without the addition of biological or synthetic matrices or coagulants. A unique feature of our dynamic cell culture device is the creation of a microenvironment, without the addition of biological or synthetic matrices or coagulants, that promotes the 3D organization of hepatocytes into cord-like structures that exhibit functional membrane polarity as evidenced by the expression of gap junctions and the formation of an extended, functionally active, bile canalicular network.     

GPCR structure-based virtual screening approach for CB2 antagonist search

The potential for therapeutic specificity in regulating diseases has made cannabinoid (CB) receptors one of the most important G-protein-coupled receptor (GPCR) targets in search for new drugs. Considering the lack of related 3D experimental structures, we have established a structure-based virtual screening protocol to search for CB2 bioactive antagonists based on the 3D CB2 homology structure model. However, the existing homology-predicted 3D models often deviate from the native structure and therefore may incorrectly bias the in silico design. To overcome this problem, we have developed a 3D testing database query algorithm to examine the constructed 3D CB2 receptor structure model as well as the predicted binding pocket. In the present study, an antagonist-bound CB2 receptor complex model was initially generated using flexible docking simulation and then further optimized by molecular dynamic and mechanical (MD/MM) calculations. The refined 3D structural model of the CB2-ligand complex was then inspected by exploring the interactions between the receptor and ligands in order to predict the potential CB2 binding pocket for its antagonist. The ligand-receptor complex model and the predicted antagonist binding pockets were further processed and validated by FlexX-Pharm docking against a testing compound database that contains known antagonists. Furthermore, a consensus scoring (CScore) function algorithm was established to rank the binding interaction modes of a ligand on the CB2 receptor. Our results indicated that the known antagonists seeded in the testing database can be distinguished from a significant amount of randomly chosen molecules. Our studies demonstrated that the established GPCR structure-based virtual screening approach provided a new strategy with a high potential for in silico identifying novel CB2 antagonist leads based on the homology-generated 3D CB2 structure model.     

A Novel 3D Cultured Model for Studying Early Changes in Age‐Related Macular Degeneration

Various in vitro culture systems have been used to investigate the pathogenesis of age‐related macular degeneration (AMD). However, many still rely on oversimplified monolayer culture models. AMD is a complex disease, associated with the pathological changes to multiple structural components such as the Bruch's membrane, retinal pigment epithelium (RPE), and choroidal endothelial cells. This study aims to construct a novel 3D coculture model using the polycaprolactone (PCL)‐gelatin electrospun scaffold, with human RPE cells (hRPE) and primate choroidal cells (RF‐6A). Results from this study show that PCL‐gelatin scaffolds have a highly porous ultrastructure that supports the attachment, proliferation, differentiation, and migration of the hRPEs and choroidal endothelial cells. It is also demonstrated that the PCL‐gelatin 3D coculture model may be useful in exploring the molecular interplay between the hPRE and the choroidal endothelial cells, and their effects on growth factor modulation, which may be important in the pathogenesis of AMD.     

Use of Three‐Dimensional Arterial Models To Predict the In Vivo Behavior of Nanoparticles for Drug Delivery

Nanomaterials have been widely used for applications in biomedical fields and could become indispensable in the near future. However, since it is difficult to optimize in vivo biological behavior in a 3D environment by using a single cell in vitro, there have been many failures in animal models. In vitro prediction systems using 3D human‐tissue models reflecting the 3D location of cell types may be useful to better understand the biological characteristics of nanomaterials for optimization of their function. Herein we demonstrate the potential ability of 3D engineered human‐arterial models for in vitro prediction of the in vivo behavior of nanoparticles for drug delivery. These models enabled optimization of the composition and size of the nanoparticles for targeting and treatment efficacy for atherosclerosis. In vivo experiments with atherosclerotic mice suggested excellent biological characteristics and potential treatment effects of the nanoparticles optimized in vitro.     

Advances in 3D Bioprinting of Biomimetic and Engineered Meniscal Grafts

The meniscus plays a crucial role in loads distribution and protection of articular cartilage. Meniscal injury can result in cartilage degeneration, loss of mechanical stability in the knee joint and ultimately lead to arthritis. Surgical interventions provide only short-term pain relief but fail to repair or regenerate the injured meniscus. Emerging tissue engineering approaches based on 3D bioprinting provide alternatives to current surgical methods for meniscus repair. In this review, the current bioprinting techniques employed in developing engineered meniscus grafts are summarized and discuss the latest strategies for mimicking the gradient structure, composition, and viscoelastic properties of native meniscus. Recent progress is highlighted in gene-activated matrices for meniscus regeneration as well. Finally, a perspective is provided on the future development of 3D bioprinting for meniscus repair, emphasizing the potential of this technology to revolutionize meniscus regeneration and improve patient outcomes.