Quantitative determination and validation of avermectin B1a in commercial products using quantitative nuclear magnetic resonance spectroscopy

Nuclear magnetic resonance is defined as a quantitative spectroscopic tool that enables a precise determination of the number of substances in liquids as well as in solids. There is few report demonstrating the application of NMR in the quantification of avermectin B_1a (AVB_1a); here, a proton nuclear magnetic resonance spectroscopy (¹H NMR) using benzene [1‐methoxy‐4‐(2‐nitroethyl) (PMN)] as an internal standard and deuterochloroform as an NMR solvent was tested for the quantitative determination of AVB_1a. The integrated signal of AVB_1a at 5.56 ppm and the signal of PMN at 8.14 ppm in the ¹H NMR spectrum were used for quantification purposes. Parameters of specificity, linearity, accuracy, precision, intermediate precision, range, limit of detection (LOD), limit of quantification (LOQ), stability and robustness were validated. The established method was accurate and precise with good recovery (98.86%) and relative standard deviation (RSD) of assay (0.34%) within the linearity of the calibration curve ranging from 5.08 to 13.58 mg/ml (R² = 0.9999). The LOD and LOQ were 0.009 and 0.029 mg/ml, which indicated the excellent sensitivity of the method. The stability of the method was testified by a calculated RSD of 0.11%. The robustness was testified by modification of four different parameters, and the differences among each parameter were all less than 0.1%. Comparing with the assay described by the manufacturer of avermectin tablets, there was no significant difference between the assay obtained by HPLC and quantitative NMR (qNMR), which indicated qNMR was a simple and efficient method for the determination of AVB_1a in commercial formulation products. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantitative nuclear magnetic resonance imaging of liquids in swelling polymers

The variation of nuclear magnetic resonance (NMR) relaxation parameters (T₁, T₂) within a polymer during swelling, limits the absolute accuracy with which liquid concentration profiles can be obtained using NMR imaging. In this article a study of the diffusion of decalin into ultra-high molecular weight polyethylene (UHMWPE) is reported. The study illustrates the use of a method of analysis whereby quantitative solvent profiles can be obtained from data influenced by both T₁ and T₂ contrast effects. A T₁ and T₂ map are obtained at a point in the uptake of liquid where the greatest range in liquid concentration is obtained at a point in the uptake of liquid where the greatest range in liquid concentration is observed. The intensity of signal corresponding to liquid in the polymer is compared to that of pure liquid in a reference sample, and correlations for T₁ and T₂ values versus signal intensity are used to deconvolve relaxation contrast, to yield the true liquid concentration. The technique was used to study the effect of degree of crosslinking of UHMWPE on the swelling kinetics and decalin transport within the polymer. A spin-echo imaging technique was used with a recycle delay approximately equal to the average spin-lattice relaxation time of the liquid, and an echo time approximately half the average spin-spin relaxation time. Under these conditions the relaxation contrast was significant, yet the mass uptake data derived from the concentration profiles obtained, using the method of analysis described, agreed well with gravimetric data. © 1995 John Wiley & Sons, Inc.     

Phosphate additives determination in meat products by 31-phosphorus nuclear magnetic resonance using new internal reference standard: hexamethylphosphoroamide

New ³¹P NMR internal reference standard - hexamethylphosphoroamide (HMPA) was applied for determination of added polyphosphates and their ionic forms in raw pork meat and meat products. Phosphate species were determined after extraction with a boric acid buffer (pH = 9) and EDTA solution, using internal standard (HMPA) procedure. Hexamethylphosophoroamide was also used as the NMR reference standard. Linear correlations between phosphates and polyphosphate concentrations and ³¹P NMR signal areas were found in the range 81-5236 mg P/dm³, presenting 95-99% recovery and variation coefficient (CV) ≤ 5%. Studied HMPA procedure revealed shorter analysis time and the same recovery (>95%) and precision (CV = 1.3-2.7%) in comparison to MDPA method. Results of phosphate determination by both ³¹P NMR methods were tested against the molybdenumvanadate yellow spectrophotometric method (standard PN-ISO 13730, 1999) using standard reference material (certified phosphate solution).     

Quantitative proton magnetic resonance determination of N,N‐dimethylformamide in one intermediate of the Quimi‐Hib vaccine

Quimi‐Hib is a conjugate vaccine against Haemophilus influenza type b (Hib) where the Hib antigen is the only one produced by chemical synthesis. NMR has become the alternative of choice for the identity of intermediates during the chemical synthesis of Hib antigen. We explore a rapid quantitative proton magnetic resonance (qHNMR) assay for the determination of N,N‐dimethylformamide (DMF) as a residual in one of the critical intermediates. The proposed assay has been shown to be accurate, precise for intermediate precision conditions (relative standard deviation <3% for spectrometer‐to‐spectrometer variations), specific (no detected interferences), and rugged (percentage difference <3% for day‐to‐day and spectrometer‐to‐spectrometer variations). The quantitative NMR assay can replace the common chromatographic methods for monitoring the DMF contents in one crucial step of the synthetic scheme. Copyright © 2012 John Wiley & Sons, Ltd.     

Quantitative 2D HSQC NMR determination of polymer structures by selecting suitable internal standard references

A new analytical method based on the 2D HSQC NMR sequence is presented, which can be applied for quantitative structural determination of complicated polymers. The influence of T1 and T2 relaxations, off-resonance effects, coupling constants and homonuclear couplings are discussed. It was found that the T2 values measured on polymeric samples with the conventional HSQC-CPMG sequence could not be used to correct the errors caused by T2 relaxations during the polarization transfer delay. A unique way of selecting the proper internal standard reference signal(s) is therefore proposed to eliminate the major errors caused by T2 relaxations, resonance offsets, coupling constant deviations and homonuclear couplings. Two polymer samples, a cellulose triacetate and an acetylated lignin, have been used to illustrate the principles. The methodology developed in this work is robust to instrument miss-setting and it can find wide-spread applications in areas where a quantitative analysis of structurally complicated polymers is necessary.     

Quantitative preparative gas chromatography of caffeine with nuclear magnetic resonance spectroscopy

Caffeine test solute was employed in combination with an internal standard (IS), 1,4‐dimethoxybenzene, in preparative‐gas chromatography (prep‐GC), with nuclear magnetic resonance (NMR) experiments. The IS served to: (i) quantify the trapping efficiency of an external trapping assembly, consisting of a capillary column cryotrap at the end of the analytical column; (ii) quantify the solute response in different NMR samples; and (iii) permit correlation of expected level of response of a compound in the NMR experiment, based on relative responses of the IS and solute in the GC result. The recovery rate of caffeine from multiple injections of sample (1×, 2×, 5× and 10×) was 69.6 ± 1.3%, which correlated well (R² = 0.999) with the number of injections of compound. The ¹H‐NMR spectrum was sufficient to enable structural characterisation of the reference caffeine compound, and was achieved with recovery of amounts of ≤10 μg from a single aliquot. Less than 400 μg of collected caffeine (40 replicate injections) was sufficient for structural characterisation by ¹³C‐NMR spectral analysis. The method allows development of approaches to separate unknown compounds in complex samples, and to separately use MS and NMR for their characterisation.     

核磁共振法测定依帕列净含量

分别以盐酸吉西他滨和齐多夫定为内标,采用定量核磁共振法对依帕列净含量进行测定。以氘代二甲亚砜和重水混合液为溶剂,确定氢定量核磁共振方法(1H-q NMR)的测试条件为:激发脉冲角度30°;时间域数据点32 K;测定温度303 K;脉冲延迟时间20 s;采样次数32;窗函数0.3 Hz。在此实验条件下,结果专属性良好,稳定性可达24 h,耐用性符合要求。以样品与内标的峰面积比对其摩尔比绘制标准曲线,结果显示,依帕列净与内标盐酸吉西他滨的摩尔比在0.512 5~1.953 8范围内,依帕列净与内标齐多夫定的摩尔比在0.494 7~1.966 0范围内线性关系良好,相关系数(r2)均为0.999 9。以盐酸吉西他滨和齐多夫定为内标时,依帕列净的含量测定结果分别为99.83%和99.77%,相对标准偏差(RSD)分别为0.06%和0.19%。2种内标方法的测定结果一致,所建立的方法专属、准确、简便、快捷,适用于新药的含量测定。     

Quantitative determination and validation of octreotide acetate using 1H‐NMR spectroscopy with internal standard method

Quantitative nuclear magnetic resonance (qNMR) is a well‐established technique in quantitative analysis. We presented a validated ¹H‐qNMR method for assay of octreotide acetate, a kind of cyclic octopeptide. Deuterium oxide was used to remove the undesired exchangeable peaks, which was referred to as proton exchange, in order to make the quantitative signals isolated in the crowded spectrum of the peptide and ensure precise quantitative analysis. Gemcitabine hydrochloride was chosen as the suitable internal standard. Experimental conditions, including relaxation delay time, the numbers of scans, and pulse angle, were optimized first. Then method validation was carried out in terms of selectivity, stability, linearity, precision, and robustness. The assay result was compared with that by means of high performance liquid chromatography, which is provided by Chinese Pharmacopoeia. The statistical F test, Student's t test, and nonparametric test at 95% confidence level indicate that there was no significant difference between these two methods. qNMR is a simple and accurate quantitative tool with no need for specific corresponding reference standards. It has the potential of the quantitative analysis of other peptide drugs and standardization of the corresponding reference standards.     

Investigation of perfluorosulfonic acid ionomer solutions by 19f NMR and DLS: Establishment of an accurate quantification protocol

Long side chain perfluorosulfonic acid (PFSA) aqueous solutions with various degrees of substitution and trifluoroacetic acid solutions were investigated by liquid ¹⁹F nuclear magnetic resonance (NMR) to propose a new and efficient quantification protocol. These two examples were selected to respond to a specific need for quantification in fuel cell applications. Classical quantification revealed a systematic underestimation of the PFSA concentrations at room temperature, in contrast to small fluorinated molecules. Dynamic light scattering data suggested the presence of “NMR silent aggregates” up to 50 °C. These aggregates appeared as large particles of about 30 µm in diameter, resulting from the agglomeration of primary aggregates through hydrogen bonds. An increase of the measurement temperature to 80 °C was sufficient to take apart the secondary aggregates, and get the correct quantification. In parallel, a rapid ¹⁹F NMR quantification method was developed using a careful analysis of the Signal‐to‐Noise ratio. This new method provided, in at least a six decades range, an estimation of the PFSA concentration without the need for an external reference. This approach may be successfully applied to determine the fluorine atom content of any small molecule or polymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2210–2222     

Quantitative analysis of oxide materials by laser-induced breakdown spectroscopy with argon as an internal standard

Laser-induced breakdown spectroscopy (LIBS) is demonstrated as a quantitative technique for geochemical analysis. This study demonstrates the applicability of LIBS to multielemental analysis of minerals using argon as an internal standard. Laser-induced breakdown spectroscopy has been applied to measure elements in oxide form. In the present study, the contents of several oxides, such as Fe₂O₃, CaO and MgO, in geological samples from the Tierga Mine (Zaragoza, Spain) were analyzed by LIBS. An argon environment was used to eliminate interference from air at atmospheric pressure. Furthermore, argon was used as an internal standard. The result was enhanced signal and enhanced linearity of the calibration curves. The Fe₂O₃, CaO and MgO concentrations determined by LIBS were compared with the results obtained using another analytical technique, inductively coupled plasma optical emission spectrometry (ICP-OES). The concentrations found using LIBS were in good agreement with the values obtained by ICP-OES.     

Quantitative Analysis of Location‐ and Sequence‐Dependent Deamination by APOBEC3G Using Real‐Time NMR Spectroscopy

The human antiretroviral factor APOBEC3G (A3G) deaminates the newly synthesized minus strand of the human immunodeficiency virus 1 (HIV‐1), which results in the abolition of the infectivity of virus‐infectivity‐factor (Vif)‐deficient HIV‐1 strains. 1 – 6 A unique property of A3G is that it deaminates a CCC hot spot that is located close to the 5′ end more effectively than one that is less close to the 5′ end. However, the mechanism of this process is elusive as it includes nonspecific binding of A3G to DNA and sliding of A3G along the DNA strand. Therefore, this process cannot be analyzed by existing methods using the Michaelis–Menten theory. A new real‐time NMR method has been developed to examine the nonspecific binding and the sliding processes explicitly, and it was applied to the analysis of the deamination by A3G. As a result, the location‐dependent deamination can be explained by a difference in the catalytic rates that depend on the direction of the approach of A3G to the target cytidine. Real‐time NMR experiments also showed that A3G deaminates CCCC tandem hotspots with little redundancy, which suggests that A3G efficiently mutates many CCC hotspots that are scattered throughout the HIV‐1 genome.     

Quantitative analysis of malic and citric acids in fruit juices using proton nuclear magnetic resonance spectroscopy

¹H NMR spectroscopy was applied to the quantitative determination of malic and citric acids in apple, apricot, pear, kiwi, orange, strawberry and pineapple juices. Aspartic acid was studied as a potential interference. The effect of the sample pH on the chemical shifts of signals from malic, citric and aspartic acids was examined and a value of 1.0 was selected to carry out the determination. Integration of NMR signals at 2.89-2.95 and 3.00-3.04 ppm were used for calculating the concentration of malic and citric acids, respectively. At this pH the integrated signals were not overlapped. Sodium 3-(trimethylsilyl)tetradeuteropropionate (TSP) was used as an internal reference. The obtained results applying NMR procedures to analyze the juices from different fruits were compared to those obtained using enzymatic methods and both were in close agreement. The intra- and inter-day repeatability was tested for apple juice (7.86 g l⁻¹ malic acid, 0.32 g l⁻¹ citric acid) and apricot juice (5.06 g l⁻¹ malic acid, 4.79 g l⁻¹ citric acid) obtaining coefficients of variation lower than 3.4% for intra-day measures (n = 10) and lower than 3.8% for inter-day measures (n = 20).     

Assessment of substituent effects on the parameters of 35Cl nuclear quadrupole resonance in para‐substituted benzene‐sulphenyl chloride via quantum chemical calculations

In this research, substituent effects on the parameters of ³⁵Cl nuclear quadrupole resonance (NQR) in para‐substituted benzene‐sulphenyl chloride were studied at M062X/6‐311G(d,p) theory level. The ³⁵Cl NQR parameters of the quadrupole coupling constant (QCC) and electric‐field gradient (EFG) tensor, as well as an asymmetric parameter, were shown to be correlated with Hammett constant following their calculations. The frontier orbital energy levels, HOMO‐LUMO gaps, hardness, electrophilicity, and chemical potential values of these molecules were calculated as well. natural bond orbital (NBO) analysis was applied for calculating natural populations at chlorine atoms.     

Ethanol determination in frozen fruit pulps: an application of quantitative nuclear magnetic resonance

This study reports the chemical composition of five types of industrial frozen fruit pulps (acerola, cashew, grape, passion fruit and pineapple fruit pulps) and compares them with homemade pulps at two different stages of ripening. The fruit pulps were characterized by analyzing their metabolic profiles and determining their ethanol content using quantitative Nuclear Magnetic Resonance (qNMR). In addition, principal component analysis (PCA) was applied to extract more information from the NMR data. We detected ethanol in all industrial and homemade pulps; and acetic acid in cashew, grape and passion fruit industrial and homemade pulps. The ethanol content in some industrial pulps is above the level recommended by regulatory agencies and is near the levels of some post‐ripened homemade pulps. This study demonstrates that qNMR can be used to rapidly detect ethanol content in frozen fruit pulps and food derivatives. Copyright © 2015 John Wiley & Sons, Ltd.     

1H, 13C and 15N NMR spectral analysis of substituted 1,2,3,4‐tetrahydro‐pyrido[1,2‐a]pyrimidines

The NMR spectroscopic data of a series of thirty‐four 3‐acylpyrido[1,2‐a]pyrimidinium salts are analyzed, which were prepared as either perchlorates or chlorides. Methyl group substituted 3‐aroyltetrahydropyrido[1,2‐a]pyrimidines with the methyl substituent in positions 6, 8 and 9 as well as both in positions 6 and 8 were investigated bearing various aroyl substituents. Unequivocal assignment of all resonances was achieved via two‐dimensional ¹H,¹H‐COSY measurements, ¹H,¹³C and ¹H,¹⁵N HSQC as well as HMBC experiments, and important diagnostic CH and NH couplings in the heteroaromatic ring system are evaluated. The influence of the methyl substituents was analyzed on the proton, carbon and nitrogen shifts. A significant effect of the counter ion on some chemical shifts of the nuclei under discussion of the pyridopyrimidines is found, allowing the indirect detection of the anion, which is confirmed by direct measurement of the ³⁵Cl nucleus of the perchlorates. Copyright © 2013 John Wiley & Sons, Ltd.     

Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

Quantitation of memantine hydrochloride bulk drug and its tablet formulation using proton nuclear magnetic resonance spectrometry

The use of quantitative nuclear magnetic resonance spectrometry for the determination of non‐UV active memantine hydrochloride with relative simplicity and precision has been demonstrated in this study. The method was developed on a 500 MHz NMR instrument and was applied to determination of the drug in a tablet formulation. The analysis was performed by taking caffeine as an internal standard and D₂O as the NMR solvent. The signal of methyl protons of memantine hydrochloride appeared at 0.75 ppm (singlet) relative to the signal of caffeine (internal standard) at 3.13 ppm (singlet). The method was found to be linear (r² = 0.9989) in the drug concentration range of 0.025 to 0.80 mg/ml. The maximum relative standard deviation for accuracy and precision was <2. The limits of detection and quantification were 0.04 and 0.11 mg/ml, respectively. The robustness of the method was revealed by changing nine different parameters. The deviation for each parameter was also within the acceptable limits. The study highlighted possibility of direct determination of memantine hydrochloride in pure form and in its marketed tablet formulation by the use of quantitative NMR, without the need of derivatization, as is the requirement in HPLC studies. Copyright © 2016 John Wiley & Sons, Ltd.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

Polynomial coefficients. Application to spin–spin splitting by N equivalent nuclei of spin I > 1/2

The NMR intensity pattern of a nucleus split by N identical nuclei of spin 1/2 is given by the binomial coefficients. These are conveniently obtained from Pascal's triangle, equivalent to the chemist's branching diagram. Much less well‐known is the pattern from splitting by N identical nuclei of spin I > 1/2. This was originally presented in terms of multinomial coefficients, but polynomial coefficients are more convenient. These describe the number of ways that N objects can be distributed to 2I + 1 numbered boxes. They arise in the polynomial expansion and are conveniently obtained from generalizations of Pascal's triangle. Examples and predictions are given.     

Quantitative 31P‐NMR spectroscopy for the determination of fosfomycin and impurity A in pharmaceutical products of fosfomycin sodium or calcium

A quantitative ³¹P‐NMR method for the determination of fosfomycin and impurity A in pharmaceutical products of fosfomycin sodium or calcium has been developed. In this method, coaxial inserts containing trimethyl phosphate are used as external standard. The method is convenient and robust, and gives both high accuracy and precision. It is shown that an accurate determination is possible using different probes and coaxial inserts. Copyright © 2015 John Wiley & Sons, Ltd.