Exploring Actuation and Mechanotransduction Properties of Polymer Brushes

Soft nanotechnology requires new approaches and materials to efficiently convert chemical energy into mechanical motion and vice versa. A number of key design parameters, such as responsiveness to external stimuli, directionality of response through alignment, transduction via surface stresses or changes in ionic conductivity can be found in polymer brushes and several recent examples of actuation and transduction in polymer brushes will be explored.

     

Ultradense Polymer Brushes by Adsorption

Standing room only : Dense polymer brushes can be prepared by adsorbing a diblock copolymer comprising a neutral block and a polyelectrolyte block to an oppositely charged polyelectrolyte brush (see picture). The density of the resulting neutral brush is determined by charge compensation, leading to brush densities well over 1 nm^?2. The diblock copolymer can be desorbed by changing the solution conditions.

     

“Clickable” and Antifouling Block Copolymer Brushes as a Versatile Platform for Peptide‐Specific Cell Attachment

To tailor cell–surface interactions, precise and controlled attachment of cell‐adhesive motifs is required, while any background non‐specific cell and protein adhesion has to be blocked effectively. Herein, a versatile and highly reproducible antifouling surface modification based on “clickable” groups and hierarchically structured diblock copolymer brushes for the controlled attachment of cells is reported. The polymer brush architecture combines an antifouling bottom block of poly(2‐hydroxyethyl methacrylate) poly(HEMA) and an ultrathin azide‐bearing top block, which can participate in well‐established “click” reactions including the highly selective copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) reaction under mild conditions. This straightforward approach allows the rapid conjugation of a cell‐adhesive, alkyne‐bearing cyclic RGD peptide motif, enabling subsequent specific attachment of NIH 3T3 fibroblasts, their extensive proliferation and confluent cell sheet formation after 48 h of incubation. The generally applicable strategy presented in this report can be employed for surface functionalization with diverse alkyne‐bearing biological moieties via CuAAC or copper‐free alkyne‐azide cycloaddition protocols, making it a versatile functionalization approach and a promising tool for tissue engineering, biomaterial implant design, and other applications that require surfaces supporting highly specific cell attachment.     

Synthesis and Applications of Compartmentalised Molecular Polymer Brushes

Polymer science is rapidly advancing towards the precise construction of synthetic macromolecules of formidable complexity. Beyond the impressive advances in control over polymer composition and uniformity enabled by the living polymerisation revolution, the introduction of compartmentalisation within polymer architectures can elevate their functionality beyond that of their constituent parts, thus offering immense potential for the production of tailor‐made nanomaterials. In this Minireview, we discuss synthetic routes to complex molecular brushes with discrete chemical compartments and highlight their potential in the development of advanced materials with applications in nanofabrication, optics and functional materials.     

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm⁻². Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.     

Tailored Poly(2‐oxazoline) Polymer Brushes to Control Protein Adsorption and Cell Adhesion

POx bottle‐brush brushes (BBBs) are synthesized by SIPGP of 2‐isopropenyl‐2‐oxazoline and consecutive LCROP of 2‐oxazolines on 3‐aminopropyltrimethoxysilane‐modified silicon substrates. The side chain hydrophilicity and polarity are varied. The impact of the chemical composition and architecture of the BBB upon protein (fibronectin) adsorption and endothelial cell adhesion are investigated and prove extremely low protein adsorption and cell adhesion on BBBs with hydrophilic side chains such as poly(2‐methyl‐2‐oxazoline) and poly(2‐ethyl‐2‐oxazoline). The influence of the POx side chain terminal function upon adsorption and adhesion is minor but the side chain length has a significant effect on bioadsorption.

     

Polymer Brushes on Planar TiO2 Substrates

A facile and universal method is presented for the preparation of polymer brushes on amorphous TiO₂ film. Homogeneous and stable poly(methyl methacrylate), polystyrene, poly(4‐vinylpyridine), and poly(N‐vinyl imidazole) (PNVI) brushes up to 550 nm are directly created onto TiO₂ via UV‐induced photopolymerization of corresponding monomers. Kinetic studies reveal a linear increase in thickness with the polymerization time. Characterization of the resulting polymer brushes by FTIR spectroscopy, X‐ray photoelectron spectroscopy, contact angle, and atomic force microscopy (AFM) indicates an efficient UV‐grafting reaction. Finally, we have demonstrated the possibility in converting the PNVI brushes to poly(vinyl imidazolium bromide), i.e., poly(ionic liquid) brushes by polymer–analogous reactions.

     

Detailed Analysis of Pancreatic Tumor Cell Attachment on Gradient PDEGMA Brushes

Poly(di(ethylene glycol) methyl ether methacrylate) (PDEGMA) brushes show interesting thermoresponsive behavior that can be applied for cell release surfaces. Here it is shown that PDEGMA thickness gradients, which are synthesized by surface‐initiated atom transfer radical polymerization, allow the systematic and precise analysis of the attachment of PaTu 8988 cells. By pumping the polymerization solution into the reactor with vertically fixed initiator samples, PDEGMA gradients with linearly increasing dry ellipsometric thickness with typical slopes of 2.5 nm cm⁻¹ are obtained. A very narrow transition of PaTu 8988t cell attachment is observed that starts for a thickness larger than 7.1 ± 0.2 nm. For PDEGMA layers thicker than 8.7 ± 0.2 nm no attached cells are found. This very narrow transition in brush properties within a thickness difference of <2 nm from cell‐adherent to cell‐nonadherent can be determined in much greater detail than before owing to the thickness gradients with shallow slope.     

Particle Penetration into Polydisperse Polymer Brushes: A Theoretical Analysis

Based on theoretical analysis, the effect of polydispersity on particle penetration into polydisperse polymer brushes is investigated. Three different polydispersities representing sharp, moderate, and extremely wide chain length distributions are chosen, since the corresponding explicit expressions of brush density at these polydispersities are available. To simplify the discussion, this study is restricted to spherical particles of small size which ensure that the particle insertion only causes local conformational perturbations. By analyzing the particle distribution, it is found that polydispersity always facilitates particle penetration. This prediction is confirmed by analyzing the surface fluctuations of the brushes. Interestingly, uniform scaling relations are observed for particles penetrating into monodisperse and moderately polydisperse brushes. The uniformity predicted by monodisperse and moderately polydisperse brushes originates from the same asymptotic behavior of their densities approaching the brush edge. This indicates that polydispersity brings significant influence only at high polydispersities.     

Stimuli‐Responsive Biointerface Based on Polymer Brushes for Glucose Detection

The construction and characterization of a biosensor based on polymer brushes is reported. The use of polymer brushes combined with nanoparticles was applied to show its suitability as a biosensor platform – with glucose oxidase as an enzyme probe. The biosensor demonstrated a pH‐sensitive on‐off property, and it was further used to control or modulate the electrochemical responses. In terms of the kinetic behavior, we were able to show the changing in the kinetic parameters of glucose oxidase operating in “on” and “off” state of the polymer brushes. The performance of the bioelectrode was investigated by chronoamperometry, impedance electrochemistry and cyclic voltammetric techniques. At optimized experimental conditions the dynamic concentration range was 2.0 to 16.0 mmol L^?1 with a detection limit of 5.6×10–⁶ mol L^?1. The repeatability of current responses for injections of 5.0 mmol L^?1 glucose was evaluated to be 5.3 % (n=10). The resulting biosensor seemed to provide the enzymes with a biocompatible nanoenvironment as it sustained the enhanced enzyme activity for an extended time and promoted possible good electron transfer through the polymer brushes to the electrode.     

Improving Hemocompatibility of Membranes for Extracorporeal Membrane Oxygenators by Grafting Nonthrombogenic Polymer Brushes

Nonthrombogenic modifications of membranes for extracorporeal membrane oxygenators (ECMOs) are of key interest. The absence of hemocompatibility of these membranes and the need of anticoagulation of patients result in severe and potentially life‐threatening complications during ECMO treatment. To address the lack of hemocompatibility of the membrane, surface modifications are developed, which act as barriers to protein adsorption on the membrane and, in this way, prevent activation of the coagulation cascade. The modifications are based on nonionic and zwitterionic polymer brushes grafted directly from poly(4‐methyl‐1‐pentene) (TPX) membranes via single electron transfer‐living radical polymerization. Notably, this work introduces the first example of well‐controlled surface‐initiated radical polymerization of zwitterionic brushes. The antifouling layers markedly increase the recalcification time (a proxy of initiation of coagulation) compared to bare TPX membranes. Furthermore, platelet and leukocyte adhesion is drastically decreased, rendering the ECMO membranes hemocompatible.     

Simultaneous Preparation of Multiple Polymer Brushes under Ambient Conditions using Microliter Volumes

The fabrication of well‐defined, multifunctional polymer brushes under ambient conditions is described. This facile method uses light‐mediated, metal‐free atom‐transfer radical polymerization (ATRP) to grow polymer brushes with only microliter volumes required. Key to the success of this strategy is the dual action of N‐phenylphenothiazine (PTH) as both an oxygen scavenger and polymerization catalyst. Use of simple glass cover slips results in a high degree of spatial and temporal control and allows for multiple polymer brushes to be grown simultaneously. The preparation of arbitrary 3D patterns and functional/emissive polymer brushes demonstrates the practicality and versatility of this novel strategy.     

Molecular Transport within Polymer Brushes: A FRET View at Aqueous Interfaces

Molecular permeability through polymer brush chains is implicated in surface lubrication, wettability, and solute capture and release. Probing molecular transport through polymer brushes can reveal information on the polymer nanostructure, with a permeability that is dependent on chain conformation and grafting density. Herein, we introduce a brush system to study the molecular transport of fluorophores from an aqueous droplet into the external “dry” polymer brush with the vapour phase above. The brushes consist of a random copolymer of N-isopropylacrylamide and a Förster resonance energy transfer (FRET) donor-labelled monomer, forming ultrathin brush architectures of about 35 nm in solvated height. Aqueous droplets containing a separate FRET acceptor are placed onto the surfaces, with FRET monitored spatially around the 3-phase contact line. FRET is used to monitor the transport from the droplet to the outside brush, and the changing internal distributions with time as the droplets prepare to recede. This reveals information on the dynamics and distances involved in the molecular transport of the FRET acceptor towards and away from the droplet contact line, which are strongly dependent on the relative humidity of the system. We anticipate our system to be extremely useful for studying lubrication dynamics and surface droplet wettability processes.     

Polymer Brushes by Nitroxide‐Mediated Polymerization

This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.

     

Thin Poly(Di(Ethylene Glycol)Methyl Ether Methacrylate) Homopolymer Brushes Allow Controlled Adsorption and Desorption of PaTu 8988t Cells

Poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) brushes, which are known to suppress protein adsorption and prevent cell attachment, are reported here to possess interesting and tunable thermoresponsive behavior, if the brush thickness is reduced or the grafting density is altered. PDEGMA brushes with a dry ellipsometric thickness of 5 ± 1 nm can be switched from cell adherent behavior at 37 °C to cell nonadherent at 25 °C. This behavior coincides with the temperature‐dependent irreversible adsorption of fibronectin from phosphate saline buffer and proteins present in the cell culture medium, as unveiled by surface plasmon resonance measurements. Unlike for tissue culture polystyrene reference surfaces, swelling of the PDEGMA chains below the lower critical solution temperature results in the absence of paxillin and actin containing cellular filaments responsible for cell attachment. These tunable properties of very thin homopolymer PDEGMA brushes render this system interesting as an alternative thermoresponsive layer for continuous cell culture or enzyme‐free cell culture systems.

     

Synthesis of Polymer Brushes Using Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) is a robust method for the preparation of well‐defined (co)polymers. This process has also enabled the preparation of a wide range of polymer brushes where (co)polymers are covalently attached to either curved or flat surfaces. In this review, the general methodology for the synthesis of polymer brushes from flat surfaces, polymers and colloids is summarized focusing on reports using ATRP. Additionally, the morphology of ultrathin films from polymer brushes is discussed using atomic force microscopy (AFM) and other techniques to confirm the formation of nanoscale structure and organization.

Formation of polymer brushes by ATRP.     

Stimuli‐Responsive Semi‐Fluorinated Polymer Brushes on Porous Silica Substrates

Summary: A diblock copolymer brush consisting of poly(methyl acrylate)‐block‐poly(pentafluoropropyl acrylate) (Si/SiO₂//PMA‐b‐PPFA) was synthesized on a porous silica substrate. The brush was exposed to selective solvents, as well as thermal treatments, to induce a surface rearrangement. The rearrangement resulted in the selective loss or creation of an ultrahydrophobic layer by location of the fluoropolymer segment. This work demonstrates that surface rearrangements observed on flat surfaces can be transferred to porous substrates.

Image of a water droplet in contact with an Si/SiO₂//PMA‐b‐PPFA ultrahydrophobic polymer brush, synthesized from a porous silica substrate.     

Enhanced Wettability Changes by Synergistic Effect of Micro/Nanoimprinted Substrates and Grafted Thermoresponsive Polymer Brushes

Thermoresponsive polymer brushes are grafted on micro/nanostructured polymer substrates as new intelligent interfaces that synergistically enhance wettability changes in response to external temperature stimuli. Thermoplastic poly(styrene‐co‐4‐vinylbenzyl chloride) [P(St‐co‐VBC)] is synthesized using radical polymerization and spin‐coated on a glass substrate. Micro/nanopillar and hole patterns are imprinted on the P(St‐co‐VBC) layer using thermal nanoimprint lithography. Poly(N‐isopropylacrylamide) (PIPAAm) brushes are grafted on the micro/nanostructured P(St‐co‐VBC) layer through surface‐initiated atom‐transfer radical polymerization using 4‐vinylbenzyl chloride as the initiator. The imprinted micro/nanostructures and grafted PIPAAm brush chain lengths affect the surface wettability. Combinations of nanopillars or nanoholes (diameter 500 nm) and longer PIPAAm brushes enhance hydrophobic/hydrophilic changes in response to temperature changes, compared with the flat substrate. The thermoresponsive hydrophobic/hydrophilic transition is synergistically enhanced by the nanostructured surface changing from Cassie–Baxter to Wenzel states. This PIPAAm‐brush‐modified micro/nanostructured P(St‐co‐VBC) is a new intelligent interface that effectively changes wettability in response to external temperature changes.