Preparation of a Rapidly Forming Poly(ferrocenylsilane)‐Poly(ethylene glycol)‐based Hydrogel by a Thiol‐Michael Addition Click Reaction

The synthesis of a rapidly forming redox responsive poly(ferrocenylsilane)‐poly(ethylene glycol) (PFS‐PEG)‐based hydrogel is described, achieved by a thiol‐Michael addition click reaction. PFS bearing acrylate side groups (PFS‐acryl) was synthesized by side group modification of poly(ferrocenyl(3‐iodopropyl)methylsilane) (PFS‐I) and characterized by ¹H NMR, ¹³C NMR, and FT‐IR spectroscopy. The equilibrium swelling ratio, morphology, rheology, and redox responsive properties of the PFS‐PEG‐based hydrogel are reported.

     

Additive Effects of Lithium Salts with Various Anionic Species in Poly (Methyl Methacrylate)

We report that lithium salts in lithium-ion batteries effectively modify the physical properties of poly (methyl methacrylate) (PMMA). The glass transition temperature (T_g) is an indicator of the heat resistance of amorphous polymers. The anionic species of the salts strongly affected the glass transition behavior of PMMA. We focused on the additive effects of various lithium salts, such as LiCF₃SO₃, LiCOOCF₃, LiClO₄, and LiBr, on the T_g of PMMA. The large anions of the former three salts caused them to form macroscopic aggregates that acted as fillers in the PMMA matrix and to combine the PMMA domains, increasing T_g. On the other hand, LiBr salts dispersed microscopically in the PMMA matrix at the molecular scale, leading to the linking of the PMMA chains. Thus, the addition of LiBr to PMMA increased T_g as well as the relaxation time in the range of glass to rubber transition.     

Controlling the Thermosensitive Gelation Properties of Poly(organophosphazenes) by Blending

Summary: After synthesizing both hard poly(organophosphazenes), which acted as strong hydrogels at a temperature below 37 °C, and soft poly(organophosphazenes), which displayed the opposite properties, we blended the polymers. When these polymers were blended at an appropriate ratio, the blended aqueous solution changed into a transparent hydrogel with improved mechanical properties at a temperature of 37 °C. According to DSC and IR measurements, the two polymers blended homogeneously and exhibited a behavior characteristic of a completely different copolymer.

An aqueous poly(organophosphazene) solution at room temperature (left) is reversibly and rapidly transformed into a transparent hydrogel at body temperature (right) when a hard poly(organophosphazene) is blended with a soft one at an appropriate ratio.     

聚甲基丙烯酸(N-羟基琥珀酰亚胺)酯的簇聚诱导发光研究

不含普通发光单元的非典型生色团发光化合物因其基础研究重要性和广泛的应用前景引起了人们的极大兴趣.其中许多化合物还具有独特的聚集诱导发光（Aggregation-induced emission,AIE）特性.然而其发光机理仍然存在争议.在此前的研究中,提出了簇聚诱导发光（clustering-triggered emission,CTE）机理,即非典型生色团的簇聚和电子共享来解释这些体系的发光和AIE现象.为进一步验证这一假说,设计合成了不含传统生色团的聚甲基丙烯酸（N-羟基琥珀酰亚胺）酯（PNHSMA）.其稀溶液基本不发光,但浓溶液,纳米聚集体,固体粉末均发射蓝光,呈现出AIE性质.通过与其单体甲基丙烯酸（N-羟基琥珀酰亚胺）酯（NHSMA）的发光行为对比及单体单晶结构解析,利用CTE机理很好地解释了其光物理行为.     

聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能

溶胶-凝胶;聚硅酸;聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能     

A Rapidly Self‐Healing Host–Guest Supramolecular Hydrogel with High Mechanical Strength and Excellent Biocompatibility

It is still a challenge to achieve both excellent mechanical strength and biocompatibility in hydrogels. In this study, we exploited two interactions to form a novel biocompatible, slicing‐resistant, and self‐healing hydrogel. The first was molecular host–guest recognition between a host (isocyanatoethyl acrylate modified β‐cyclodextrin) and a guest (2‐(2‐(2‐(2‐(adamantyl‐1‐oxy)ethoxy)ethoxy)ethoxy)ethanol acrylate) to form “three‐arm” host–guest supramolecules (HGSMs), and the second was covalent bonding between HGSMs (achieved by UV‐initiated polymerization) to form strong cross‐links in the hydrogel. The host–guest interaction enabled the hydrogel to rapidly self‐heal. When it was cut, fresh surfaces were formed with dangling host and guest molecules (due to the breaking of host–guest recognition), which rapidly recognized each other again to heal the hydrogel by recombination of the cut surfaces. The smart hydrogels hold promise for use as biomaterials for soft‐tissue repair.     

聚甲基丙烯酸甲酯与聚醋酸乙烯酯共混的红外光谱研究

用红外光谱(FTIR)研究了聚甲基丙烯酸甲酯(PMMA)与聚醋酸乙烯酯(PVAc)共混体系相容性,在160℃以上共混体系发生相分离;分相体系与非分相体系的FTIR谱明显不同;共混体系的FTIR谱不能从两统组分红外光谱简单加和得到;结果表明大分子构象发生了变化,PMMA/PVAc体系相容可能是大分子构象熵变所致。     

Microwave-assisted Preparation of Temperature Sensitive Poly（N-isopropylacrylamide） Hydrogel with Improved Responsive Properties

Poly(N-isopropylacrylamide) (PNIPAM) hydrogel, which is insoluble but shrinkable or swellable in aqueous media when temperature rises or drops across 33oC1,2, has been extensively studied due to its potential applications in the fields of controlled drug …     

PEG‐Modified Macroporous Poly(Glycidyl Methacrylate) and Poly(2‐Hydroxyethyl Methacrylate) Microspheres to Reduce Non‐Specific Protein Adsorption

To minimize non‐specific protein adsorption on macroporous poly(glycidyl methacrylate) and poly(2‐hydroxyethyl methacrylate) microspheres containing amino and/or carboxyl groups, the microspheres are coated with α,ω‐bis‐carboxy poly(ethylene glycol) and amino‐terminated poly(ethylene glycol‐co‐propylene glycol) or α‐methoxy‐ω‐amino poly(ethylene glycol). Adsorption of bovine serum albumin (BSA), γ‐globulin, ¹²⁵I‐BSA, pepsin, and chymotrypsin on neat and PEGylated microspheres is determined by UV–VIS spectroscopy of supernatants and eluates or by measurement of radioactivity in an ionization chamber. Neat and PEGylated microspheres adsorb 0.8–70% and 0.02–44% of protein, respectively.

     

交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络水凝胶的制备及其溶胀性能

将线性聚(N-异丙基丙烯酰胺)(PNIPAAm)和海藻酸钠(SA)分子同时引入到PNIPAAm凝胶中,制备了交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络(Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN)水凝胶。在弱碱性条件下(pH=7.4),改变SA与线性PNIPAAm的质量比对Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的溶胀度没有太大的影响。在酸性条件下(pH=1.0),其溶胀度随着SA与线性PNIPAAm质量比的减小而增大。由于亲水性SA与线性PNIPAAm的协同作用,Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的消溶胀速率得到很大提高。     

丝素蛋白纤维/聚N-异丙基丙烯酰胺复合水凝胶的性能

以丝素蛋白纤维为填充材料,采用自由基聚合的方法制备复合聚N-异丙基丙烯酰胺(PNIPPAm)水凝胶,研究复合水凝胶的黏弹性能、溶胀性能和反复溶胀-收缩性能。结果表明:丝素蛋白纤维的加入改善了复合水凝胶的力学性能,其平衡溶胀率不仅与温度有关,而且与丝素蛋白纤维的含量有关。此外,处在表面的丝素蛋白纤维与水凝胶之间存在间隙,在反复溶胀-收缩过程中可以作为输水通道,有利于水分子进出,提高了PNIPPAm水凝胶对温度的响应速率并使其溶胀-收缩重复性更好。     

Studies on Poly(Methyl Methacrylate) (PMMA) and Thermoplastic Polyurethane (TPU) Blends

Blends of poly(methyl methacrylate) (PMMA) and thermoplastic polyurethane (TPU) in different compositions viz., 95/5, 90/10, 85/15 and 80/20 (by wt/wt, % of PMMA/TPU) were blended by melt mixing using a twin‐screw extruder. All the PMMA/TPU blends have been characterized for physico‐mechanical properties such as density, melt flow index, tensile behavior and izod impact strength. The impact strength of the PMMA/TPU blends were found to increase significantly with an increase in the percentage of TPU up to 20%, by retaining the tensile strength of PMMA. The effect of chemical aging on the performance of blends has been studied.     

Poly(Methyl Methacrylate) Coatings Containing Flame Retardant Additives from Suspensions in Water-2-Propanol

A dip-coating technique is designed for deposition of poly(methyl methacrylate) (PMMA) from water/2-propanol mixture, avoiding the use of traditional toxic solvents. Solutions of PMMA macromolecules with high molecular weight (M_W) are obtained for a water/2-propanol ratio of 0.15–0.33 and the solubilization mechanism is discussed. The ability to use concentrated PMMA solutions and high M_W of the polymer are the key factors for the successful dip coating deposition. The coating mass for 10 g L⁻¹ polymer solutions shows a maximum at a water/2-propanol ratio of 0.25. The deposition yield increases with the polymer concentration increase and with an increasing number of the deposited layers. PMMA deposits protect stainless steel from aqueous corrosion. The coating technique allows for the fabrication of composite coatings, containing flame-retardant materials (FRMs), such as commercial halloysite, huntite, hydrotalcite, and synthesized Al(OH)₃, in the PMMA matrix. The FRM content in the coatings is modified by variation of the FRM content in colloidal suspensions. A fundamentally new method is developed, which is based on the salting out aided dispersive extraction of Al(OH)₃ from the aqueous synthesis medium to 2-propanol. It is based on the use of hexadecylphosphonic acid molecules as extractors. The method offers advantages of reduced agglomeration.     

Poly[2-(N,N-Dimethylamino) Ethyl Methacrylate] /Poly(Styrene-Co-Methacrylic Acid) Interpolymer Complexes

Summary: Poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA), copolymers of different compositions of styrene with 2-(N,N-dimethylamino)ethyl methacrylate (SDMAEMA) or methacrylic acid (SMA) were synthesized by free radical polymerization and characterized by several techniques. Different ternary mixtures containing proton-acceptors PDMAEMA or SDMAEMA, proton-donor copolymers SMA and a solvent (butan-2-one or THF) were prepared. The present study, that investigated several factors that affected the phase behaviors of the ternary mixtures above, confirmed that, indeed depending on the nature of solvent, densities of interacting species, amounts of efficient specific interactions that occurred between the two copolymers, interpolymer complexes of different structures were elaborated. The complexation phenomena, observed with these different systems were analyzed in solution by viscometry that confirmed these effects in monitoring the formation of interpolymer complexes. The specific interactions that occurred between pairs of polymers of each system above were qualitatively evidenced by FTIR spectroscopy from the appearance of new bands or their new redistribution. The glass transition temperature Tg of the obtained complexes of different structures determined by DSC varied differently with the weight fraction of one of the copolymers. These various Tg-compositions were analyzed using the Kwei and Brostow et al. approach recently developed. Thermal analysis of some of the elaborated complexes, examined by thermogravimetry, confirmed their improved thermal stability.     

Molecular Size and Morphology of Single Chains of Poly(sulfobetaine methacrylate)

The effects of the concentration of sodium chloride in an aqueous solution(c_NaCl) and the temperature on the molecular size of poly(sulfobetaine methacrylate)(PSBMA) were studied via viscometry and dynamic light scattering(DLS). The morphology of single-chain PSBMA was determined by atomic force microscopy(AFM). The results demonstrate that the hydrodynamic diameter of PSBMA can be expressed as a continuous function of c_NaCl, with the molecular size of PSBMA increasing and eventually approaching an asymptotic value with increasing c_NaCl. The molecular size of PSBMA at a lower c_NaCl(0.04 mol/L) increases with increasing temperature, which is the opposite of the temperature effect at a higher c_NaCl(2.0 mol/L). Therefore, the internal structure of PSBMA chains in solutions with a low salt concentration differs from that in solutions with a high salt concentration. In addition, the morphology of single chains of PSBMA appears to be spherical, containing 89% void space, and the apparent size of the dried chains is almost identical to that in solution.     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.     

一种新型可降解蓝光固化医用粘合剂的合成及其性能研究

临床外科手术缝合费时费力,且容易留下疤痕,医用粘合剂为解决这些问题提供了一种有效手段。本文基于在生物材料领域广泛应用的可降解材料聚癸二酸甘油酯（PGS）,研制了一种新型的可降解蓝光固化医用粘合剂。以PGS为基体与甲基丙烯酸（2-异氰基乙基）酯反应制得聚癸二酸甘油酯接枝甲基丙烯酸（2-异氰基乙基）酯（PGS-IM）粘结剂,其结构和性能经¹H NMR, ATR-FTIR, TGA和DSC表征。并测试了其蓝光固化后的粘结性能,考察了其生物相容性。结果显示：PGS-IM的玻璃化转变温度为-30.6 ℃;玻璃和PET板的粘结强度分别为0.84±0.12 MPa和0.39±0.07 MPa。 RAECs培养实验显示其具有良好的生物相容性。     

环氧基团功能化弹性体增韧聚乳酸的性能

以2种不同结构的弹性体乙烯-辛烯共聚物接枝甲基丙烯酸缩水甘油酯(POE-g-GMA)和乙烯-丙烯酯甲酯-甲基丙烯酯缩水甘油酯三元共聚物(E-MA-GMA)增韧聚乳酸(PLA), 研究了接枝型与嵌段型弹性体的结构对聚乳酸增韧效果的影响. 结果表明, 接枝型聚合物POE-g-GMA与基体PLA之间具有良好的界面相互作用, 当POE-g-GMA的质量分数为15%时, 共混体系的缺口冲击强度为72.4 kJ/m², 而E-MA-GMA的质量分数为15%时, 共混体系的缺口冲击强度为32.4 kJ/m², 结果表明, 接枝型聚合物POE-g-GMA增韧效果明显优于嵌段型E-MA-GMA.