共查询到20条相似文献,搜索用时 31 毫秒
1.
Armando A. Morin-Martinez Jessica Arcudia Ximena Zarate Miguel Eduardo Cifuentes-Quintal Gabriel Merino 《Journal of computational chemistry》2023,44(3):248-255
Herein we show a density functional theory-based study performed on two recently predicted polymorphs of the BeH2 monolayer, α-BeH2 and β-BeH2. The α-BeH2 phase possesses an in-plane negative Poisson's ratio (NPR), introducing it into the unique group of auxetic materials. Our assessment delves into the linear-elastic and finite-strain regimes to understand both polymorphs' structural and mechanical responses to deformation. We find that the in-plane NPR is shown to be only parallel to the bonds in α-BeH2 and remains along the uniaxial tensile path. Concomitantly, an out-of-plane transition toward auxetic is also revealed in regions exhibiting conventional Poisson's ratios, making α-BeH2 a bidirectionally auxetic material. While phase transitions in β-BeH2 are triggered at very short strains, α-BeH2 displays excellent elasticity against tension, superior to that of most currently known 2D materials. 相似文献
2.
Metamaterials are specifically designed materials that possess unique properties that cannot be found in naturally occurring substances. These remarkable materials have the capability to bring about a significant transformation across a wide range of industries. Auxetic structures are a recent area of research possess a distinctive characteristic known as a negative Poisson's ratio. Unlike conventional materials that contract when stretched, auxetic structures actually expand in two dimensions. In this study, a new auxetic structure was introduced, and thermoplastic polyurethane samples were 3D printed using a fused filament fabrication method. The samples are then subjected to strains ranging from 5% to 50% and Poisson's ratios are measured both experimentally and numerically using finite element method in Ansys software. By comparing the results of the experimental research and simulation, it is evident that applying strains within this range causes the Poisson's ratio of the samples to change from −0.81 to −0.14 and it showed that the newly introduced structure is auxetic. According to the analysis of root mean square error, the hexagonal mesh with a size of 0.7 mm consistently produced the most accurate results, aligning closely with the experimental sample. Given that this is an entirely novel auxetic structure within the category of arrow-head auxetic structures, there is potential for future research to be conducted in order to further develop and enhance this model. 相似文献
3.
N. Yildirim S. M. Shaler D. J. Gardner R. Rice D. W. Bousfield 《Cellulose (London, England)》2014,21(6):4337-4347
In this study, biodegradable foams were produced using cellulose nanofibrils (CNFs) and starch (S). The availability of high volumes of CNFs at lower costs is rapidly progressing with advances in pilot-scale and commercial facilities. The foams were produced using a freeze-drying process with CNF/S water suspensions ranging from 1 to 7.5 wt% solids content. Microscopic evaluation showed that the foams have a microcellular structure and that the foam walls are covered with CNF’s. The CNF’s had diameters ranging from 30 to 100 nm. Pore sizes within the foam walls ranged from 20 to 100 nm. The materials’ densities ranging from 0.012 to 0.082 g/cm3 with corresponding porosities between 93.46 and 99.10 %. Thermal conductivity ranged from 0.041 to 0.054 W/m-K. The mechanical performance of the foams produced from the starch control was extremely low and the material was very friable. The addition of CNF’s to starch was required to produce foams, which exhibited structural integrity. The mechanical properties of materials were positively correlated with solids content and CNF/S ratios. The mechanical and thermal properties for the foams produced in this study appear promising for applications such as insulation and packaging. 相似文献
4.
Teik-Cheng Lim 《Journal of mathematical chemistry》2003,34(3-4):215-220
Analytical closed-form solution of the elastic properties (such as longitudinal stiffness, shear stiffness and Poisson's ratio) of a taut polyethylene single-molecule is developed in this paper in terms of C–C and C–C–C bond parameters. The concepts considered herein include resolution of forces and of displacement, with due application of Hooke's law to determine the longitudinal stiffness and the in-plane Poisson's ratio. Adopting the solid mechanics theory as an analogy, the shear stiffness of a taut polyethylene chain is conveniently obtained. Results reveal unique Poisson's ratio property of a polyethylene single-molecule in comparison to usual bulk materials, thereby suggesting size-dependency of nano-scale materials in terms of the Poisson's ratio. Finally some frequently occurring terms in all three elastic property expressions are grouped to summarize and to reveal some form of uniformity in the analytical solutions. 相似文献
5.
A. N. Maslov L. A. Smirnova S. A. Ryabov Yu. I. Dergunov 《Polymer Science Series B》2006,48(4):190-193
The mechanical properties of polyurethane foams based on tolylene diisocyanate and polyether modified by polymer-polyol, which is a styrene-acrylonitrile copolymer grafted onto polyol, were studied. The breaking stress, the hardness at 40% compression, the elongation at break, and the density depend on the amount of both the hard phase in the polymer-polyol and the polymer-polyol component in the polyurethane foam composition. Samples with a density of ~30 kg/m3 were prepared to have other mechanical properties practically identical to those of standard samples with a density of ~37–47 kg/m3. 相似文献
6.
Three of the Poisson's ratios have been measured on a low-density polyethylene (LDPE) sheet with parallel lamellas morphology over the temperature range from +20 to ?60°C. The measurements were carried out using a specially constructed lateral extensometer which utilized the Hall effect to detect the very small strains involved. The Poisson's ratios show considerable temperature dependence, and at high temperature the overall deformation approximates to pure shear as previously noted. It is suggested that this relates to the onset of the c-shear relaxation. 相似文献
7.
H. Krbecek J. K. Krüger M. Pietralla 《Journal of Polymer Science.Polymer Physics》1993,31(11):1477-1485
To overcome the difficulties in measuring high-frequency shear constants of polymeric materials by ultrasonic or Brillouin scattering technques, we extrapolate results from oriented materials to zero birefringence. Shear constants C44 in the high-frequency limit (GHz) are determined for polyethylene, poly(ethylene terephthalate), poly(vinyl chloride), poly(methyl methacrylate), and polycarbonate using Brillouin scattering. Accurate values of Poisson's ratio are derived. The extrapolation to full orientation using an amended Moseley relation gives upper bounds for the “intrinsic birefringence.” Changes in the character of the orientation process are easily detected by monitoring the mode numbers, which are defined by analogy to Poisson's ratio. Extrapolation of these ratios to their upper bound 0.5 gives an independent check of the maximum intrinsic birefringence. © 1993 John Wiley & Sons, Inc. 相似文献
8.
H. Hatakeyama H. Matsumura T. Hatakeyama 《Journal of Thermal Analysis and Calorimetry》2013,111(2):1545-1552
Rigid polyurethane (PU) foams having saccharide and castor oil structures in the molecular chain were prepared by reaction between reactive alcoholic hydroxyl group and isocyanate. The apparent density of PU foams was in a range from 0.05 to 0.15 g cm?3. Thermal properties of the above polyurethane foams were studied by differential scanning calorimetry, thermogravimetry and thermal conductivity measurement. Glass transitions were observed in two steps. The low-temperature side glass transition was observed at around 220 K, regardless of castor oil content. This transition is attributed to the molecular motion of alkyl chain groups of castor oil. The high-temperature side glass transition observed in the temperature range from 350 to 390 K depends on the amount of molasses polyol content. The high-temperature side glass transition is attributed to the molecular motion of saccharides, such as sucrose, glucose, fructose as well as isocyanate phenyl rings, which act as rigid components. Thermal decomposition was observed in two steps at 570 and 620–670 K. Thermal conductivity was observed at around 0.032 J sec?1 m?1 K?1. Compression strength and modulus of PU foams were obtained by mechanical test. It was confirmed that the thermal and mechanical properties of PU foams could be controlled by changing the mixing ratio of castor oil and molasses for suitable practical applications. 相似文献
9.
O. Almanza Y. Masso‐Moreu N. J. Mills M. A. Rodríguez‐Prez 《Journal of Polymer Science.Polymer Physics》2004,42(20):3741-3749
A regular Kelvin foam model was used to predict the linear thermal expansion coefficient and bulk modulus of crosslinked, closed‐cell, low‐density polyethylene (LDPE) foams from the polymer and gas properties. The materials used for the experimental measurements were crosslinked, had a uniform cell size, and were nearly isotropic. Young's modulus of biaxially oriented polyethylene was used for modeling the cell faces. The model underestimated the foam linear thermal expansion coefficient because it assumed that the cell faces were flat. However, scanning electron microscopy showed that some cell faces were crumpled as a result of foam processing. The measured bulk modulus, which was considerably smaller than the theoretical value, was used to estimate the linear thermal expansion coefficient of the LDPE foams. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3741–3749, 2004 相似文献
10.
Alireza Ashori Mohammad Ghofrani Mohammad Hadi Rezvani Saeed Khojasteh Khosro 《先进技术聚合物》2015,26(8):1034-1040
The aim of this work was to use waste tire rubber (WTR) in the middle layer of hybrid plywood materials. The effects of four variable parameters, namely, WTR contents (430 and 720 g), resin contents (120 and 160 g/m2), hot pressing (single‐stage and two‐stage), and arrangements of veneer layers on the mechanical, physical, and acoustical properties, were studied. Beech (Fagus orientalis) and alder (Alnus glutinosa) veneers having 1.8‐mm thickness were used in the production of hybrid plywood panels. Rubber layers of 3‐ and 5‐mm thickness were used in the middle layer of plywood samples. To produce plywood panels, single‐stage and two‐stage hot‐pressing processes were used. Bonding of wood layers was performed using 120 and 160 g/m2 urea‐formaldehyde resins, and to form the rubber layers and bond them to wood layers, methylene diisocyanate resin (150 g/m2) was used. Overall trend showed that with the increase in rubber content, the physical properties (water absorption, thickness swelling, and sound absorption) of the manufactured panels were improved, while the mechanical properties (modulus of rapture, modulus of elasticity, and impact strength) of the panels were reduced. Both physical and mechanical performances of plywood panels were improved with increase in resin content. An increase in the WTR content in plywood improved the composite's acoustical property. The production process of the wood/rubber plywood did not significantly affect their properties. The order of improvement in the physical properties of the panels is rubber content > resin content > arrangement of layers > pressing process. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
11.
A new method for the synthesis of lignin-based liquid polyols was developed. Organosolv lignin was reacted with ethylene carbonate in polyethylene glycol as solvent, leading to a full conversion of the phenolic OH into primary aliphatic OH groups. These aromatic polyols are obtained in a single step, without any purification. Upon modification of the polyethylene glycol molar mass, a wide range of hydroxyl values (IOH) can be covered. The polyols with up to 30%wt lignin have a viscosity suitable for the direct elaboration of polyurethane (PUR) foams. The method presents significant advantages over oxypropylation, the most common method for producing lignin-based polyols since it is performed at ambient pressure, without any toxic chemicals, does not require purification or post treatment, and allows to produce polyols with tunable properties. Four different aromatic polyols were then synthesized to produce rigid PUR foams, with substitution of up to 100% of a standard polyether polyol. The developed polyols showed very high reactivity, allowing to reduce the catalyst content in the PUR formulation by 75%. Rigid PUR foams prepared with 25% substitution of the standard polyol showed properties in the range of commercial PUR foams, with more than 90% closed cells and thermal conductivity of about 25 mW m?1/K, perfectly adequate for thermal insulation applications. 相似文献
12.
Francesco Galvagnini Andrea Dorigato Luca Fambri Alessandro Pegoretti 《Molecules (Basel, Switzerland)》2022,27(23)
polypropylene (PP) syntactic foams (SFs) containing hollow glass microspheres (HGMs) possess low density and elevated mechanical properties, which can be tuned according to the specific application. A possible way to improve their multifunctionality could be the incorporation of organic Phase Change Materials (PCMs), widely used for thermal energy storage (TES) applications. In the present work, a PCM constituted by encapsulated paraffin, having a melting temperature of 57 °C, was embedded in a compatibilized polypropylene SF by melt compounding and hot pressing at different relative amounts. The rheological, morphological, thermal, and mechanical properties of the prepared materials were systematically investigated. Rheological properties in the molten state were strongly affected by the introduction of both PCMs and HGMs. As expected, the introduction of HGMs reduced both the foam density and thermal conductivity, while the enthalpy of fusion (representing the TES capability) was proportional to the PCM concentration. The mechanical properties of these foams were improved by the incorporation of HGMs, while they were reduced by addition of PCMs. Therefore, the combination of PCMs and HGMs in a PP matrix generated multifunctional materials with tunable thermo-mechanical properties, with a wide range of applications in the automotive, oil, textile, electronics, and aerospace fields. 相似文献
13.
几种自组装拉胀分子网络的分子模拟 总被引:1,自引:1,他引:1
报道了几种蜈蚣形、双足蜈蚣形聚合物 ,以及单箭头、双箭头形小分子通过氢键自组装形成拉胀分子网络的分子设计 .分子力学计算结果表明这些自组装分子网络靠氢键相互作用规则排列 ,具有类似倒插蜂窝网络结构 ,所设计的聚合物、小分子的合成较之以往报道的二维网络结构的合成简便易行 ,为真正分子水平意义上的拉胀结构的实现提供了新的思路和指导 相似文献
14.
Tatiya Trongsatitkul Duangdao Aht-Ong Wannee Chinsirikul 《Macromolecular Symposia》2004,216(1):265-280
Cast films of liquid crystalline polymer (LCP) and low density polyethylene (LDPE) blends have been produced and investigated. Effects of LCP content and processing parameters, i.e., processing temperature profile, screw speed, and post-die drawing, on morphology and O2 barrier property are presented. Increasing processing temperature and LCP content tend to enhance aspect ratios (L/D) of the LCP dispersed phase and at the same time influencing LCP structure. These effects are clearly observed when LCP content is increased from 10 % to 30 % by wt. At high temperature profiles, LCP morphologies are presented in a more or less ‘ribbon’ or ‘tape’ like structure together with a common LCP fibrillar structure. Films of 10% and 30% LCP produced at two optimum temperature profiles show a noticeable proportion of LCP tape-like structure and interestingly high barrier properties of ∼1.6 and 5.5 times that of the neat LDPE films. High barrier characteristics of such LCP/PE blend films are indicated by low oxygen transmission rate values. Apart from processing temperature effect, increases of screw speed result in films having smaller aspect ratios for both LCP fibers and ribbons; films also exhibit poorer barrier and mechanical properties. However, post-die drawing clearly demonstrates a positive effect in improving aspect ratios of the LCP domains and the resulting films' moduli. Effects of post-die drawing on enhancing films' barrier properties become more pronounced at high LCP content. By comparing with the neat LDPE film (30 μm thick) having modulus of ∼180 MPa and OTR of ∼11000 cc/m2.day, the developed LCP/PE films containing 30 wt% LCP show remarkably high modulus values of ∼1100 MPa with low OTR of ∼2000 cc/m2.day. 相似文献
15.
Polymeric foam materials may be used as energy absorbing materials for protection in impact scenarios, and design with these materials requires the mechanical properties of foams across a range of deformation rates, where high deformation rate testing often requires small samples for testing. Owing to their cellular macrostructure, and the large deformations that occur during loading of foams, the measured stress-strain response of a foam material may be influenced by the sample size. In this study, the mechanical properties of three closed-cell polymeric foams (Low Density Polyethylene, Expanded Polystyrene and Expanded Polypropylene) at two different densities were investigated over a range of deformation rates from 0.01 s−1 to 100 s−1. For each foam material, three different nominal sample sizes (10 mm, 17 mm and 35 mm) were tested. On average, the polymeric foam materials exhibited increasing stress with increasing deformation rate, for a given amount of strain.Density variation was identified at the sample level, with smaller samples often exhibiting lower density. Expanded Polystyrene demonstrated the highest variability in sample density and corresponding variability in mechanical response, qualitatively supported by observed variations in the macrostructure of the foam. Expanded Polypropylene exhibited variability in density with sample size, and observable variability in the material macrostructure; however, the dependence of the measured mechanical properties on sample size was modest. Low Density Polyethylene was found to have a relatively consistent cell size at the macrostructure level, and the material density did not vary significantly with sample size. In a similar manner, the dependence of measured mechanical properties on sample size was modest. The effect of sample size was identified to be material specific, and it is recommended that this be assessed using sample-specific density measurements and considering different sized samples when testing foam materials. 相似文献
16.
Rigid polyurethane foams with up to 50 wt% of microcapsules from LDPE-EVA containing Rubitherm®RT27 were synthesized. The influence of microcapsules on the foams density, microstructure and mechanical resistance was studied. Cell size and strut and wall thicknesses were analyzed by SEM. The relationships between densities and foam microstructures with their Young's moduli and collapse stress were found by the Gibson and Ashby formulations and the Kerner equation for mechanical properties of composites. It was found a cell structure change from polyhedral closed-cells to spherical or amorphous open-cells. A good agreement between the experimental and theoretical data was observed but requiring a cell form factor. Thus, Fitting parameters confirmed the high trend of these microcapsules to be incorporated into the foam cell walls and the form factors depicted the abrupt change of cell morphology. Thus, these equations are suitable for predicting the mechanical properties of foams containing fillers of low mechanical resistance. 相似文献
17.
When observing or describing the damage state in a composite material, often only Young's modulus or residual deformation are considered. Generally, however, the Poisson's ratio is more sensitive to damage than those properties. Rather than observing the Poisson's ratio as function of crack density, the evolution of the Poisson's ratio as function of the longitudinal strain was studied in part I of this research, where a peculiar shape of the evolution was observed and proven to be entirely due to the material itself, rather than the sensors used for the strain measurement.In this article, a theoretical explanation for the peculiar evolution of the Poisson's ratio as function of the longitudinal strain is presented. Based on this explanation, extra experiments were conducted for validation purposes.The material used for this study is a carbon fabric-reinforced PPS. 相似文献
18.
Structures and physical properties of rigid polyurethane foams with water as the sole blowing agent 总被引:3,自引:0,他引:3
LI Xiaobin CAO Hongbin & ZHANG Yi . Institute of Process Engineering Chinese Academy of Sciences Beijing China . Graduate School of the Chinese Academy of Sciences Beijing China 《中国科学B辑(英文版)》2006,49(4):363-370
Polyurethane rigid foams have been used for many applications such as pipelines insulation materials, automotive parts, solar water heater and construction materials[1,2], due to their desirable physical properties. Traditional rigid foam is made by the reaction of a polyol and 4,4′-diphenylmethane diisocyanate (MDI) with chlorofluorocarbons (CFCs), in particular tri- chlorofluoromethane (CFC-11) and/or HCFC-141b as blowing agents. However, the CFCs blowing agents contain halogens, whic… 相似文献
19.
Mònica Ardanuy Miguel Ángel Rodríguez‐Pérez José Antonio de Saja José Ignacio Velasco 《先进技术聚合物》2012,23(5):841-849
In this paper, polymer foams based on a benzoxazine resin have been successfully prepared using azodicarbonamide (ADC) as a chemical blowing agent and have been characterized regarding their foaming behavior, cellular structure, and physical properties. The effect of the ADC on the curing process of the resin was analyzed using differential scanning calorimetry and blowing agent decomposition was followed by thermogravitmetric analysis (TGA). The characterization of the cellular structure of the foamed samples was done using scanning electron microscopy. The mechanical properties of the foams were determined using compression tests and the thermal conductivity was assessed using the transient plane source method. The results indicated that the curing process and gas release took place in a similar time interval. The foams showed an isotropic cellular structure with relative densities in the range 0.35–0.60, and showed compressive strengths and compressive moduli in the range of 10–70 MPa and 400–1100 MPa, respectively. Thermal conductivities were in the range of 0.06–0.12 W m?1K?1. The findings in this paper demonstrate the possibility of producing polybenzoxazine foams using a simple process in which curing and foaming take place simultaneously. In addition, the mechanical characterization of these materials indicates that they are suitable for structural applications. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
20.
Frank P. Alt Ludwig L. Bhm Hans‐Frieder Enderle Joachim Berthold 《Macromolecular Symposia》2001,163(1):135-144
HDPE specialities having tailored bimodal molecular mass distributions suitable for applications as e.g. pipe or film material are formed in the Hostalen®‐BM low pressure slurry process. A cascade of two STHD (stirred tank heavy diluent) reactors is used to produce at extremely different reaction conditions in each step of the polymerization an in situ polyethylene blend consisting of a low molecular mass homopolymer and a high molecular mass copolymer. This way, a resin having a very broad molecular mass distribution and an inverse comonomer distribution is obtained. High impact strength, stress crack resistance, stiffness, tensile strength, and good processability are combined and materials showing outstanding properties are achieved. 相似文献