Mathematical modeling of silver extraction by an emulsion liquid membrane process

A general physical model of a typical batch extraction system employing an emulsion liquid membrane process for the extraction of silver has been developed. The model takes into account the extraction reaction between the silver ion and the carrier molecules at the external interface, the diffusion of the complex in the membrane phase, the stripping reaction at the internal interface and the reaction of silver ion with the reagent, HCL, in the internal phase to yield silver chloride incapable of permeating through the membrane phase. In addition, the leakage of the internal aqueous phase to the external aqueous phase due to membrane breakage has been incorporated in this model. The batch extraction of silver using D2EHPA as a carrier has been carried out under various experimental conditions. The experimental data can be well explained by the present model.     

The Role of Internal Droplet Size on Emulsion Stability and the Extraction Performance of Kraft Lignin Removal from Pulping Wastewater in Emulsion Liquid Membrane Process

It has been discovered that the size of internal droplets in primary emulsion determines emulsion dispersion and stability in emulsion liquid membrane (ELM) process for removal of lignin from pulping wastewater. Generally, primary emulsion contains kerosene, Aliquat 336, sodium bicarbonate, as well as Span 80 as diluent, carrier, internal phase, and surfactant, respectively. Hence, this study had looked into the parameters, including concentration of surfactant, carrier, and stripping agent; emulsification speed and time; as well as agitation speed and time. As a result, the diameter of the smallest droplets (1.4 µm) was formed with maximum lignin extraction (95%), minimum swelling (5%) at 3% (w/v) surfactant concentration, 12,000 rpm of emulsification within 5 minutes, 0.01 M of Aliquat 336, 0.1 M of NaHCO_3, and 250 rpm of extraction within 10 minutes.     

Mathematical modeling of penicillin G extraction in an emulsion liquid membrane system containing only a surfactant in the membrane phase

An extraction experiment of penicillin G was performed in an emulsion liquid membrane system in which only ECA 4360J exists in the organic membrane phase without a predominant carrier, Amberlite LA-2, used in our previous works and it functions as a carrier as well as a surfactant. A permeation model for the present system has been developed as a primary study to examine the transport mechanism of penicillin G in the previous batch and continuous systems with two carriers of Amberlite LA-2 and ECA 4360J. The model takes into account the mass transfer in the external aqueous film, the extraction reaction between penicillin G and ECA 4360J at the external interface, the diffusion of penicillin G in the emulsion phase, the stripping reaction at the internal interface and the pH change of internal aqueous solution containing Na₂CO₃ with penicillin G transported into the internal phase. The experimental data were well fitted with the present model. Also, an expression for the reaction of penicillin G with ECA 4360J was obtained through a series of equilibrium measurements in liquid–liquid extraction system.     

Extraction of Priority Pollutant 4-Nitrophenol from Water by Emulsion Liquid Membrane: Emulsion Stability,Effect of Operational Conditions and Membrane Reuse

This work aims to the extraction of the priority pollutant 4-nitrophenol (4-NP) from water by emulsion liquid membrane (ELM). Liquid membrane consists of a diluent (hexane) and a surfactant (Span 80). Sodium carbonate solution was used as internal aqueous phase. Effects of important experimental conditions governing the stability of the W/O emulsion were investigated. Influence of operating parameters that affects the permeation of 4-NP such as surfactant concentration, emulsification time, sulfuric acid concentration in external phase, acid type in external phase, internal phase concentration, type of internal phase, stirring speed, volume ratio of internal phase to membrane phase, treatment ratio, 4-NP initial concentration, and diluent type was examined. This study also evaluated the effect of Na₂CO₃ concentration in the internal aqueous phase on the stripping of 4-NP. Additionally, the reuse of the recovered membrane was studied. Under most favorable conditions, practically all the 4-NP and aniline (AN) molecules present in the feed phase were extracted. The recovery of the membrane phase was total and the extraction of 4-NP was not decreased. The ELM treatment process represents a very interesting advanced separation process for the removal of 4-NP and AN from aqueous solutions.     

谷氨酸在Span80-AOT-APS体系中的迁移行为

报道了谷氨酸在乳状液膜体系中的迁移行为,采用失水山梨醇单油酸酯(span80)-乙基己基琥珀酸酯磺酸钠(AOT)为表面活性剂,对氨基苯磺酸(APS)为载体,煤油为膜溶剂,氯化钾为内相试剂.讨论了制乳时间和乳液与外相混合时间、表面活性剂和流动载体浓度、内相试剂浓度、水乳比和油内比对分离效果的影响.确定了最佳分离条件为制乳...     

A study on a two-component liquid membrane system

A novel two-component liquid membrane system in which one of the components, polyethylene glycol, acts as both carrier and surfactant, is described. The composition and the stability of the two-component liquid membrane system are discussed in terms of surfactant concentration, base concentration in the internal phase, acidity of the external phase, the concentration of the counter-anion SCN^? in the cation extraction, etc. The extraction efficiency and the permeation mechanism of the system are compared with that of conventional three-component liquid membranes. Obviously, the nature of the system is quite different from three-component liquid membranes and conventional solvent extraction, although the system of solvent extraction also contains two components.     

Extraction of Cr (VI) by pickering emulsion liquid membrane using amphiphilic silica nanowires (ASNWs) as a surfactant

Pickering emulsion is the replacement of surfactants with solid, often nano-sized particles. The particle-stabilized emulsions have good thermodynamic and kinetic stability. Pickering emulsion liquid membrane (PELM) was prepared using mahua oil as a diluent, aliquat 336 (Trioctyl methylammonium chloride) as a carrier and amphiphilic silica nanowires (ASNWs) (10–40?ml ethanol addition) as a surfactant. Sodium hydroxide (NaOH) was used as stripping phase in the concentration range from 0.1 to 0.5?M for the extraction of hexavalent chromium [Cr (VI)] from aqueous solution. The variety of edible and non-edible oils was investigated for the stability of water in oil emulsion. Factors that influence silica-stabilized Pickering emulsions are pH, agitation speed, stripping phase concentration, the volume ratio of membrane to stripping phase (M/S), initial feed concentration, treat ratio(feed to emulsion volume ratio) and surfactant concentration for better PELM stability. And also, the extraction efficiency of Cr (VI) was investigated using aliquat as a carrier. The physicochemical properties of ASNWs were studied using Scanning Electron Microscopy (SEM), Fourier Transforms Infrared Spectroscopy (FTIR) and Dynamic Light Scattering (DLS) techniques. At an optimum condition, 99.69% of Cr (VI) removal from aqueous solution was obtained.     

乳状液膜法分离水中的铬

乳状液膜法由于其独特的物理化学性质,已广泛用于金属离子的萃取分离[1～3]。本文以span80-煤油-NaOH液膜体系分离水中铬。不加流动载体,利用内、外相中被分离物的浓度梯度实现物质迁移。当Cr2O2-7进入内相时,与内相的NaOH发生反应,在内相高浓度的NaOH存在下,可保持Cr2O2-7在液膜两侧有最大的浓度梯度,促使Cr2O2-7的迁移,实现Cr2O2-7与外相溶液的分离。1　实验部分1 1　仪器与试剂D40-1型电动搅拌器(杭州仪表电机厂),78-1型磁力加热搅拌器(江苏金坛新一佳仪器厂),721型分光光度计(上海第三分析仪器厂)。铬标准溶液(100ml/L):准…     

液膜法处理含氟废水

为了防止含氟废水的污染,人们研究了多种除氟方法,液膜技术是一项新的分离工艺,它操作简单,试剂用量少,有机相可重复利用。本文利用伯胺作迁移载体处理高含量的含氟废水,分离效率较好。 伯胺N_(1923)(简写RNH_2)为流动载体,上胺N_(205)(上海石油化工厂)为表面活性剂,煤油为溶剂。将内相CaCl_2,溶液与油相(含N_(1923)、N_(205)和煤油)按一定体积比例混合,高速搅拌,制成W/O     

镍在乳状液膜体系中的迁移行为

研究了镍在乳状液膜分离体系中的迁移行为。在此分离体系中,以煤油作为膜溶剂,span80为表面活性剂,磷酸三丁酯(TBP)为载体。详细讨论了制乳时间和混合时间、span80和TBP浓度、乳水比和油内比、内相NH。和外相HCl的浓度对镍迁移率的影响,确立了最佳分离条件。     

Emulsion liquid membrane extraction of Ni(II) and Co(II) from acidic chloride solutions using bis-(2-ethylhexyl) phosphoric acid as extractant

An emulsion liquid membrane process using bis-(2-ethylhexyl) phosphoric acid (D2EHPA) to extract and separate Ni(II) and Co(II) from acidic chloride solutions is described. Liquid membrane consists of a diluent, a surfactant (Span 80), and an extractant (D2EHPA). Hydrochloric acid was used as the stripping solution. The important parameters governing the permeation of nickel and their effect on the separation process have been studied. These parameters are stirring speed, feed phase pH, surfactant concentration, extractant concentration, stripping phase concentration, phase ratio, initial concentration of metal, and treatment ratio. The optimum conditions have been determined. The separation factors of Ni(II) with respect to Co(II), based on initial feed concentration, have been experimentally determined. Furthermore, the extraction selectivity for Co(II) over Ni(II) has been improved by using D2EHPA during the initial minutes.     

铜在乳状液膜体系中的迁移行为

近年来膜分离技术在环境治理方面得到广泛应用。本文研究了铜在span80-TBP（磷酸三丁酯）-煤油-NH3液膜分离体系中的迁移行为。用TBP作为载体,在溶液中迁移时,在外相与膜相界面上形成中性络合物后穿过膜相,在膜相与内相界面上络合物再与NH3反应,生成铜氨络离子,释放出来的TBP又返回膜相。     

Emulsion liquid membranes: Role of internal droplet size distribution on toluene/n-heptane separation

Using oil/water/oil-type emulsion liquid membranes, batch wise extraction experiments are carried out to separate toluene from a mixture of toluene and n-heptane. In the separation process using emulsion liquid membranes, the internal phase polydispersity affects mass transport of a solute because under steady operating conditions, internal droplet size and size distribution are proportional to the interfacial area. The present study aims to assess the polydispersity character of the internal droplets of emulsion globules. In this paper, the important variables affecting dispersed drop sizes as well as internal droplets mean diameter and size distribution of the emulsion globule, including impeller speed during emulsification, surfactant concentration, volume ratio of surfactant solution, carrier concentration and composition of feed phase are systematically investigated.     

液膜分离富集、测定痕量钼

用乳状液膜体系对钼进行富集。该体系包括载体 ( 5,8-二乙基 - 7-羟基十二烷 - 6-单肟 ,简称LIX63)、表面活性剂 (N1 1 3C)、溶剂(煤油 )以及内相 ( 0 .1 5mol/LNaOH溶液 )。研究了乳状液膜的稳定性、温度、钼的浓度、外相的HNO3溶液浓度及乳水比等因素对分离富集钼的影响。实验表明 ,在适宜的条件下 ,钼的迁移率可达 99.5%～1 0 0 .2 %。该法已应用于富集、测定纯钨和钢铁中的痕量钼 ,结果相当满意     

Studies on transport mechanism of Cr(VI) extraction from an acidic solution using liquid surfactant membranes

A mathematical model for analysing the extraction of Cr(VI) from aqueous acidic solution by emulsion liquid membrane using Aliquat 336 as extractant and NaOH as stripping agent has been presented. The existing models developed so far do not account for the existence of different forms of Cr(VI) ions in the aqueous phase depending on pH conditions. Accordingly, in the present model, reaction equilibrium has been considered instead of distribution coefficient to represent realistically the transport mechanism for this type of system through liquid surfactant membrane. Unlike other models, liquid–liquid equilibrium of sodium hydroxide-chloride of Aliquat 336 has also been considered. The carrier thus exists in the membrane phase in hydroxide and chloride forms and extraction of hexavalent chromium from the external phase proceeds by the two carriers. The validity of the model has been checked from comparison of the simulated curves and experimental data using chemical reaction equilibrium constant and D_eff/R² as fitting parameters.     

Extraction of Arsenic(V) from Water Using Emulsion Liquid Membrane

In this article, the extraction of arsenic(V) from water by means of emulsion liquid membrane is investigated. The influence of operating factors such as stirring speed, concentration of sulfuric acid in the external aqueous phase, concentration of sodium sulfate in internal stripping phase, and concentration of carrier in the membrane phase on the extraction efficiency are investigated and their optimum values, which provide the maximum recovery of arsenic, are determined. Taguchi experimental design is used in order to reduce the number of experiments. The optimum amounts for the extraction of arsenic from water, based on the results, are: stirring speed, 500 rpm; concentration of sulfuric acid in the feed, 1.5 g mol/lit; concentration of reagent in internal phase, 1.5 g mol/lit; and concentration of carrier in 3 ml kerosene which is added to the membrane phase, 0.1 g mol/lit.     

Facilitated transport through liquid surfactant membrane: Analysis of breakage model

A mathematical model for analyzing the experimental data of extraction of weak acid from aqueous solution by liquid surfactant membrane (LSM) using a strong base as internal reagent present in excess in a batch system has been presented. The leakage of internal phase due to membrane breakage is also discussed in the mathematical treatment. The model while considering a reaction front to exist within the emulsion globule assumes reaction equilibrium between the solute and internal reagent in the external continuous phase. The proposed model predicts successfully the experimental results of extraction of a weak acid by a strong base in a batch separation system as presented in the literature. The model is also capable of predicting excellently the experimental pH versus time data in case of the above system.     

Studies on extraction of chromium (VI) from acidic solutions containing various metal ions by emulsion liquid membrane using Alamine 336 as extractant

The extraction of chromium (VI) ions from acidic solutions containing various metal ions by emulsion liquid membrane (ELM) was studied. Liquid membrane consists of a diluent, a surfactant, and an extractant. 0.5 M ammonium carbonate solution was used as stripping solution. Effects of acid concentration in feed solution, type and concentration of stripping solution, mixing speed, surfactant concentration, phase ratio and the influence of membrane characteristics were studied and optimum conditions were determined. Under the optimum conditions, extraction of chromium (VI) was tested and it was possible to selectively extract 99% of chromium from the acidic feed solution. This study also examined the effect of extractant concentration and acid type in the feed solution on the extraction of Cr (VI) ions and almost all of Cr (VI) from the acidic feed solution containing 500 mg/L from each of Co (II), Ni (II), Cd (II), Zn (II), and Cu (II) ions, and 100–500 mg/L Cr (VI) was extracted within 5–10 min.     

Studies on emulsion liquid membrane extraction of cephalexin

An experimental study on batch extraction of cephalexin using an emulsion liquid membrane system has been reported. The effects of surfactant, carrier and solute concentrations, phase volume ratio, stirring speed, and counterion concentration on the extraction rate were examined. Surfactant, carrier and diluent used were Span-80, Aliquat-336 and n-heptane–kerosene (1:1), respectively. Under the optimised experimental conditions, emulsion swelling was found to be marginal. By maintaining an appropriate pH gradient in the feed and receiving aqueous phase, facilitated transport could be realised. Selective separation of cephalexin from a mixture of 7-aminodeacetoxy cephalosporanic acid (7-ADCA) could be demonstrated in the emulsion liquid membrane system. A mathematical model based on mass transfer across aqueous boundary layer, interfacial chemical reaction and diffusion in the emulsion globule provides a reasonable fit of the experimental solute concentration versus time profiles in the emulsion liquid membrane system.     

A simple hollow fiber renewal liquid membrane extraction method for analysis of sulfonamides in honey samples with determination by liquid chromatography–tandem mass spectrometry

A sensitive and precise analysis using hollow fiber renewal liquid membrane (HFRLM) extraction followed by high performance liquid chromatography–tandem mass spectrometry (LC–MS/MS) is described for determination of five sulfonamides in honey samples. In this procedure, the organic solvent introduced directly into the sample matrix extracts the sulfonamides and carries them over the polypropylene porous membrane. An organic solvent is immobilized inside the polypropylene porous membrane, leading to a homogeneous phase. The stripping phase at higher pH in the lumen of the membrane promotes the ionization of the target compounds releasing them to this phase. The most important parameters affecting the extraction efficiency were optimized by multivariable designs (pH and sample mass, pH and buffer for stripping phase, extraction temperature and time, type and volume of extractor solvent and use of salt to saturate the sample). Detection limits in the range of 5.1–27.4 μg kg⁻¹ and linearity coefficient of correlation higher than 0.987 were obtained for the target analytes. The results obtained for the proposed method show that HFRLM–LC–MS/MS can be used for determination of the five sulfonamides studied in honey samples with excellent precision, accuracy, practicality and short analysis time.