Synthesis of obtusinin and 7-(3′-hydroxymethylbut-2′-enyloxy)-6-methoxy-2H-1-benzopyran-2-one

Obtusinin (1) has been synthesised by the reaction of 6-methoxy-7-(3-methylbut-2-enyloxy)-2H-1-benzopyran-2-one (3) with OsO₄. Synthesis of 7-(3-hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-one (2) has been achieved by the regiospecific oxidation of3 with SeO₂ followed by reduction of the formed aldehyde with KBH₄.

---

Synthese von Obtusinin und 7-(3-Hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-on

Zusammenfassung Obtusinin (1) wurde über 6-Methoxy-7-(3-methylbut-2-enyloxy)-2H-1-benzopyran-2-on (3) mit OsO₄ synthetisiert. Die Darstellung von 7-(3-Hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-on (2) wurde mittels regioselektiver Oxidation von3 mit SeO₂, gefolgt von Reduktion des gebildeten Aldehyds mit KBH₄, bewerkstelligt.

     

Phase Diagram of the Benzene–Dinitratotetrapyridinecopper(II) (Guest–Host) System and Thermodynamic Parameters for the Hostβ2Guest Clathrate Dissociation

In the first part of the work, thephase diagram of the benzene -ndash;[CuPy⁴(NO³)²] system has beendetermined in the -100 to +200 °C temperaturerange using DTA and solubility techniques. The onlycompound found in the system is the[CuPy⁴(NO³)²] 2C⁶H⁶clathrate. It is stable up to a temperature of+104.2(5) °C at which it melts incongruently togive liquid and the solid [CuPy⁴(NO³)²]host phase. At 146.1(5) °C exfoliation into twoliquid phases is observed, with the composition of themonotectic point being close to that of the clathrate.In the second part of the work, thermodynamicparameters of the clathrate dissociation have beendetermined from benzene vapour pressure strainmeasurements. For the process1/2 [CuPy⁴(NO³)²]2C⁶H⁶(solid) = 1/2 [CuPy⁴(NO³)²] (solid) +C⁶H⁶ (gas) H° = 45.3(3) kJ/mole; S₂₉₈° = 126(1) J/(mole K); G₂₉₈° = 7.7(5) kJ/mole.     

Complex polarizability as used to analyze dielectric relaxation measurements

The effect of representing dielectric properties in terms of the complex polarizability ^c = – i is examined. Loss curves ( and tan ) are shifted towards higher frequencies, revealing the existence of new relaxations and allowing the clarifications of ones already known. We have calculated the shift ratios (at maximum or tan )/ (at maximum or tan ) from the more conventional empirical equations representing the dielectric behavior. Some examples are given.     

Thermodynamics of Binding of α:-Cyclodextrin to Straight-Chain Alkyl Derivatives in Aqueous Solution

Apparent standard Gibbs energy, enthalpy, entropy, and heatcapacity data of the interactions of -cyclodextrin (CD) to some n-carboxylatesH(CH₂)_nCOO^- (n = 4–6), are determined by isothermal titration microcalorimetryat different temperatures in phosphate buffer, pH 9.0, assuming a 1 : 1 model indilute solution. Modelling of contributions of the thermodynamic properties of the solutionindicates that CD undergoes conformational change upon binding to homologousseries of n-carboxylates, n-alcohols, ,-alkane dicarboxylates and ,-alkane diols.     

Spectrophotometric determination of vanadium with 4-(1′H-1′,2′,4′-Triazolyl-3′-azo)-2-methylresorcinol

Summary 4-(1H-1,2,4-Triazolyl-3-azo)-2-methylresorcinol reacts with vanadium(V) at pH 8.10 (Tris-HClO₄ buffer solution) to produce a pink-violet 11 complex ( _max=525 nm,=2.55×10⁴l·mol^–1· cm^–1) in a 50% (v/v) methanol-water medium, which allows the spectrophotometric determination of 0.1 to 1.51 ppm of vanadium. The method has been applied for the determination of the vanadium content in low alloy steels.

---

Spectrophotometriscbe Bestimmung von Vanadin mit 4-(1H-1,2,4-triazo-lyl-3-azo)-2-methylresorcin

Zusammenfassung Vanadin bildet bei pH 8,10 (Tris-HClO₄-buffer) mit 4-(1H-1,2,4-tri-azolyl-3-azo)-2-methylresorcin ein rosenrot-violettes Chelat, dessen Absorptionsmaximum bei 525 nm in Gegenwart von 50% Methylalkohol gemessen wird. Dieser 11-Komplex entspricht bei einer Vanadin-Konzentration von 0,1–1,51g/ml dem Beerschen Gesetz; seine molare Absorptivität ist 2,55×10⁴l·mol^–1·cm^–1. Das Verfahren wurde zur Bestimmung des Vanadins in Stahl verwendet.

     

Mono and dinuclear cationic rhodium(I) and iridium(I) complexes with sulphur donor and group Vb ligands

Summary Rhodium(I) and iridium(I) mixed complexes of the formulae [M(diolefin)LL]ClO₄, [M(diolefin)L₂L]ClO₄, [(diolefin)LIr(-L)₂IrL(diolefin)](ClO₄)₂, [(diolefin)LM(-L-L)ML'(diolefin)](ClO₄)₂, [(diolefin)Rh{-(L-L)}₂Rh(PPh₃)₂](ClO₄)₂ and [(diolefin)LIr{-(L-L)}₂IrL (diolefin)](C1O₄)₂, (L=monodentate sulphur ligand, L-L=bidentate sulphur ligand, L=group Vb ligand; M=Rh, diolefin=1,5-cyclooctadiene (COD) or 2,5-norbornadiene (NBD); M=Ir, diolefin=COD) are described.Author to whom all correspondence should be directed.     

Kinetics of triphenylphosphite ozonide consumption in reaction with triphenylphosphite

Kinetic regularities of triphenylphosphite ozonide reaction with triphenylphosphite have been studied at T=–75°C to –40°C. The rate of ozonide consumption is estimated as W=k₁[(C₆H₅O)₃P·O₃]+k₂[(C₆H₅O)₃P·O₃][(C₆H₅O)₃P], where k₁=(2.03±0.39)×10^–5s^–1(–50°C), 1gk₂=(3.82±0.33)–(6.61±0.32)/gq dm³/mol s and =2.303RT kcal/mol.

---

–75°C –40°C . : W=k₁[(C₆H₅O)₃P·O₃]+k₂[(C₆H₅O)₃P·O₃][(C₆H₅O)₃P], k₁=(2,03±0,39)·10^–5–1(–50°C); 1g k₂=(3,82±0,33)–(6,61±0,32)/ /·, =2,303·RT /

     

Spectrophotometric determination of zirconium using robinetin

Summary The complex formation between zirconium and robinetin has been spectrophotometrically investigated and made use of in the determination of zirconium. The complex has been found to contain zirconium and the flavonol in the molar ratio of 12. It obeys Beer's law up to 3.0 ppm of Zr and its stability constant has been calculated to be l.5×10⁹. The reaction is quite sensitive and selective at high concentrations of hydrochloric acid (sensitivity 0.0045 g/cm²).

---

Zusammenfassung Zur spektrophotometrischen Bestimmung von Zirkonium wird als Reagens Robinetin empfohlen, das mit Zr einen Komplex im Verhältnis 12 (ZrRobinetin) bildet. Die Stabilitätskonstante wurde zu 1,5 · 10⁹ bestimmt. Das Beersche Gesetz wird bis zu 3,0 ppm Zr befolgt. In stark Salzsauren Lösungen ist die Reaktion empfindlich und selektiv (Empfindlichkeit: 0,0045 g Zr/cm²).

     

Crystal structures of Co3(SeO3)3·H2O and Ni3(SeO3)3·H2O,two new isotypic compounds

Summary The crystal structures of the new, hydrothermally synthesized, isotypic compounds Co₃(SeO₃)₃·H₂O and Ni₃(SeO₃)₃·H₂O were determined by direct and Fourier methods and refined toR _w=0.023, 0.032 using single crystal X-ray data up to sin/=0.81 Å^–1 [space group P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. The structures are built up from [Me ₅(SeO₃)₆·2H₂O]^2– sheets containing three crystallographically different types of octahedrally coordinatedMe ²⁺ and trigonal pyramidal coordinated Se⁴⁺ atoms, respectively. These sheets are linked only by a fourth type ofMe ^2+[6] atom. All coordination polyhedra deviate significantly from their ideal shapes, bond lengths within the extremly distortedMe(4)O₆ polyhedra range from 1.983 (2) Å to 2.403 (2) Å in Co₃(SeO₃)₃·H₂O and from 1.987 (4) Å to 2.301 (3) Å in the Ni compound, O-Se-O bond angles were found between 92.8 (2)° and 104.9 (1)°. Hydrogen bond lengths are 2.802 (3)Å and 2.600 (4)Å in the Co compound, and 2.762 (6) Å and 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. The latter is one of the shortest known hydrogen bonds donated by a water molecule.

---

Die Kristallstrukturen von Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O, zwei neue isotype Verbindungen

Zusammenfassung Die Kristallstrukturen der neuen, hydrothermal synthetisierten, isotypen Verbindungen Co₃(SeO₃)₃·H₂O und Ni₃(SeO₃)₃·H₂O wurden mit direkten und Fourier-Methoden bestimmt und unter Verwendung von Einkristallröntgendaten bis sin/=0.81 Å^–1 aufR _w-Werte von 0.023, 0.032 verfeinert [Raumgruppe P ,a=8.102 (2), 7.986 (3) Å;b=8.219 (2), 8.133 (3) Å;c=8.572 (2), 8.422 (3) Å, =69.15 (1), 69.50 (1)°; =62.88 (1), 62.50 (1)°; =67.23 (1), 67.64 (1)°;Z=2]. Die Strukturen werden von [Me ₅(SeO₃)₆·2H₂O]^2– Schichten aufgebaut, die je drei kristallographisch unterschiedliche Arten von oktaedrisch koordiniertenMe ²⁺ und trigonal pyramidal koordinierten Se⁴⁺ Atomen enthalten. Diese Schichten sind nur durch eine vierte Art vonMe ^2+[6] Atomen verknüpft. Alle Koordinationspolyeder weichen deutlich von ihren Idealformen ab, Bindungslängen in den extrem verzerrtenMe(4)O₆ Polyedern variieren zwischen 1.983 (2) Å und 2.403 (2) Å in Co₃(SeO₃)₃·H₂O und zwischen 1.987 (4) Å und 2.301 (3) Å in der Ni-Verbindung, O-Se-O-Bindungswinkel liegen zwischen 92.8 (2)° und 104.9 (1)°. Wasserstoffbrückenlängen sind 2.802 (3) Å und 2.600 (4) Å in der Co-Verbindung, und 2.762 (6) Å und 2.561 (6) Å in Ni₃(SeO₃)₃·H₂O. Letztere ist eine der kürzesten bekannten Wasserstoffbrücken eines Wassermoleküls.

     

Oxygen Storage Materials for Automotive Catalysts: Ceria-Zirconia Solid Solutions

This paper reviews progress in the development of oxygen storage materials for automotive exhaust catalysts. The research was mainly conducted as a study and development exercise in the author's laboratory in Japan.Ceria-lanthana solid solutions (CL) and the first generation of ceriazirconia solid solutions (CZ) were developed as excellent oxygen storage materials for automotive catalysts in the 1980s. These materials consist of ceria doped with less than 20 mol% of La⁴⁺ or Zr⁴⁺. An increase in oxygen defects in CL and CZ under reductive conditions is responsible for an enhanced oxygen storage capability on the cerium atoms. An accurate measure of the oxygen storage capacity (OSC) per cerium is very important for theoretical and practical treatments of the catalyst. The term partial OSC was introduced to describe this capacity and to differentiate it from the usual definition of the OSC, known also as the total OSC. After the development of CL and CZ, a new technology was developed to dissolve more than 20 mol% of zirconia in the ceria, allowing second generation CZ and third generation CZ (known as ACZ, which is doped with alumina) to be successfully developed in the 1990s. The partial OSC of these materials increases with increasing amounts of zirconia dissolved in the ceria, and also with decreasing material particle size after an engine durability test. In the case of ACZ, alumina was added to CZ based on the diffusion barrier concept, in which a diffusion barrier layer inhibits the coagulation of CZ and A when the material is required for duty at high temperature in air.Furthermore, the relationship between the total or partial OSC and the structure of the ceriazirconia solid solutions is explained in this paper.For ceriazirconia solid solutions composed of equimolar CeO₂ and ZrO₂(Ce/Zr=1), the total or partial OSC of the -phase CeZrO₄, in which the cerium and zirconium ions are regularly distributed, was about twice as large as that of a ceriazirconia solid solution with a relatively irregular distribution of cerium and zirconium ions, and about five times larger than that of a mixture of ceria powder and zirconia containing only a small amount of ceriazirconia solid solution. It corresponds to about 89% of the theoretical maximum value.For a ceriazirconia solid solution composed of non-equimolar CeO₂ and ZrO₂(Ce/Zr 1), the partial OSC of a ceria--phase solid solution with a zirconia content of between 30 and 50mol% is much higher than that of a ceriazirconia solid solution of the same zirconia content. The partial OSC of a -phase and zirconia mixed oxide, which is formed by reducing the material at 1200 °C, reaches a value above 0.20 mol-O₂/mol-Ce (about 80% of the theoretical maximum value of the partial OSC), when the zirconia content is between 50 and 80 mol%.The Toyota Motor Corp. has put automotive three-way catalysts containing the first, second and third generations of CZ into practical use on a global basis.     

Electron transfer in solutions of tungstovanadophosphoric heteropoly compounds

Redox properties of some isomers of tungstovanadophosphoric heteropoly anions have been studied. Rate constants of electron transfer from -1, 2, 3-PW₉V ₂ ^V V^IVO ₄₀ ^7– to PW₁₁V^VO ₄₀ ^4– (k=1.1±0.2)×10² dm³/mol s) and from PW₁₀V^VV^ivO ₄₀ ^6– to -1,2,3-PW₉V ₃ ^V O ₄₀ ^6– (k=1.4±0.2)×10² dm³/mol s) have been measured in 30% CH₃COOH at pH 3 and 20°C.

---

- . PW₁₁V^VO₄₀ ^4– -1,2,3-PW₉V ₂ ^V V^ivO₄₀ ^7– (k=(1,1±0,2)·10^{2 3}/·), -1,2,3-PW₉V ₃ ^V O₄₀ ^6– PW₁₀V^vV^ivO₄₀ ^6– (k=(1,4±0,2)·10^{2 3}/·) pH=3 30%- CH₃COOH 20°C.

     

Discrimination of active sites for ethylene homologation and ethylene metathesis on molybdena silica catalyst

Active sites for ethylene homologation (3C₂H₄2C₃H₆) and ethylene metathesis (C₂H₄–¹²C₂+C₂H₄–¹³C₂2C₂H₄–¹³C₁) were discriminated by adding platinum to a reduced molybdena silica catalyst, and the former was presumed to be composed of several molybdenum species, while the latter was presumed to be composed of one molybdenum species.

---

(3C₂H₄2C₃H₆) (C₂H₄–¹²C₂+C₂H₄–¹³C₂2C₂H₄–¹³C₁) . , , .

     

Influence of substituents on rate constants for recombination of tertiary peroxy radicals

A linear correlation between the logarithm of rate constant (2k_t) for recombination of tertiary peroxy radicals (ROO)^* and ^* constants of substituents R was found to be 1g 2k_t=lg 2k _t ^° . The calculated values are 1g 2k _t ^° =4.59±0.08 and ^*=5.56±0.35.

---

I (2k_t) (ROO) R: 1g 2k_t=lg 2k _t ^° . , 1g 1g 2k _t ^° =4,59±0,08 =5,56±0,35

     

Polymeric membrane sodium-selective electrodes based on calix[4]arene ionophores

Six kinds of tetra alkylester type calix[4]arene derivatives, (R₁=R₂=CH₃1, C₂H₅2, C₃H₇3,n-C₄H₉4,t-C₄H₉5,n-C₁₀H₂₁6), a diethyl-didecyl mixed ester type (R₁=C₂H₅, R₂ =C₁₀H₂₁7), and three kinds of lower rim bridged types (R₁=C₂H₅, R₂–R₂=(CH₂)₁₀8, (CH₂)₁₂9, (CH₂)₂(OCH₂CH₂)₃10) were characterized by electrochemical measurement to elucidate the effect of the length of the alkyl group of alkoxycarbonyl substituents on Na⁺ selectivity. To obtain excellent Na⁺ selective ionophores, introduction of short chain alkyl groups rather than long chain ones, such as a decyl group, and maintenance of sufficient solubility of the calix[4]arene derivatives in the membrane solvent are required concurrently. Among the calix[4]arenes tested, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-tert-butylcalix[4]arene2, and the diethyl-didecyl mixed ester type derivative7 are the best ionophores for a Na⁺ selective electrode. On the other hand, sodium selectivity of the bridged type derivative9 is comparable or even superior to that of the known bis(12-crown-4).This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Reaction of ammonium sulphate with aluminium oxide

The reaction between ammonium sulphate with aluminium oxide was studied. It was confirmed by X-ray diffraction and chemical analysis that three intermediate reaction products, (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ and Al₂(SO₄)₃, are formed. The thermal decompositions of these three compounds were carried out. It has been shown that the same rate law is valid for them. The activation energies for (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ and Al₂(SO₄)₃ are 95.9, 177.9 and 291.0 kj/mol, respectively.

---

Zusammenfassung Die Reaktion von Ammoniumsulfat mit Aluminiumoxid wurde untersucht. Durch Röntgendiffraktion und chemische Analyse wurde bestätigt, daß drei Zwischenprodukte (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ und Al₂(SO₄)₃ gebildet werden. Die thermische Zersetzung der drei Verbindungen wurde durchgeführt. Es wurde gezeigt, daß für alle drei dasselbe Geschwindigkeitsgesetz Gültigkeit hat. Die Aktivierungsenergien für (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ und Al₂(SO₄)₃ sind 95.9, 177.9 und 291.0 kJ/Mol.

---

. - : (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ Al₂(SO₄)₃. , , . (NH₄)₃Al(SO₄)₃, NH₄Al(SO₄)₂ Al₂(SO₄)₃, , 95.9; 177.9 291.0 . ^–1.

---

---

The authors are grateful to Dr. H. Osada and Mr. H. Nakamura, Department of Environmental Engineering, Kyushu Institute of Technology, for their helpful discussions.     

Medium effects on the reactions of coordination complexes: Base hydrolysisof(αβS)(p-hydroxybenzoato)(tetraethylenepentamine) cobalt(III) in iso-propanol–water,tert-butanol–water and dimethyl sulfoxide–water media

The base hydrolysis of (S)(p-hydroxybenzoato)-(tetraethylenepentamine)cobalt(III) has been investigated in aqueous–organic solvent media using i-PrOH, t-BuOH and dimethyl sulfoxide (DMSO) as cosolvents at 20.0 T (°C) 40.0 (I=0.02 mol dm ^-3) with 80% (v/v) of cosolvents. Only the base-catalysed path (k_obs=k_OH[OH^-]) is observed. The relative second order rate constant k _OH ^os /k _OH ^ow at I=0 increases nonlinearly with increasing mol fraction (x_O.S.) of the cosolvents, the rate acceleration in alcoholic cosolvents being greater than in DMSO. The destabilization of ^-OH in mixed solvent media alone does not explain the observed rate acceleration. The solvent composition dependence, log k _OH ^os = log k _OH ^ow + a_ix _os ⁱ [i=1,2,k _OH ⁰ denotes k_OH at I=0 in mixed solvent(s) and water (w)] indicates specific solute–solvent interactions. The values of the relative transfer free-energy data [_TG(t.s.) - _TG^o (i.s.)](sw)(25 °C)(G), where t.s. and i.s. denote the transition state and initial state of the substrates respectively, are positive for all substrates at all compositions, indicating a greater destabilizing effect of the mixed solvent on the transition state than on the initial state. The G values also correlate with G^E(G = ax_O.S. + cG^E) for all solvents, supporting the fact that solvent structural effects mediate the rates and energetics of the reaction. However, the solvent effects on the solvation components of H and S are mutually compensating, thus indicating that there is no change in the mechanism.     

Zur Kristallstruktur von α-TlSmW2O8

Single crystals of -TlSm(WO₄)₂ were examined by X-ray diffractometer technique (space group C _2h ⁶ -C2/c;a=10.770,b=10.597,c=7.597 Å, =130.09°,Z=4). The coordination of W⁶⁺, Sm³⁺ and Tl⁺ are discribed and discussed.-TlSm(WO₄)₂ is isotypic to -KY(WO₄)₂.

     

Synthesis of novel heterocycles from thiazolecarbohydrazides

Cyclization of 2-methyl (or -phenyl)-5-phenylthiazole-4-carbohydrazides (1) and (2) under various conditions gives differing oxadiazoles: 2-(2-substituted-5-phenyl-4-thiazolyl)-1,3,4-oxadiazole-5-thiones (7) and (8), and 2-(2-substituted-5-phenyl-4-thiazolyl)-1,3,4-oxadiazoles (9) and (10). Cyclodehydration of thiazolecarbonyl-thiosemicarbazides (3)–(6) with NaOH givesthe 3-(2-substituted-5-phenyl-4-thiazolyl)-4-substituted-4H-5-mercapto-1,2,4-triazoles (11)–(14), while H ₃ PO ₄ gives the 2-(2-substituted-5-phenyl-4-thiazolyl)-5-phenylamino-1,3,4-thiadiazoles (15) and (16).A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan'. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, pp. 679–683, March, 1992.     

Skeletal isomerization of 1-butene on ZrO2/Al2O3 treated with sulfate ion

The catalytic activity for skeletal isomerization of 1-butene on ZrO₂ supported on Al₂O₃ and doped with sulfate ion has been found to be higher than on pure ZrO₂/Al₂O₃, Al₂O₃ containing sulfate ion and a commercial SiO₂–Al₂O₃ of H_o<–13.7. Sulfate ion was capable of transforming ZrO₂/Al₂O₃ into a solid superacid.

---

1- ZrO₂, Al₂O₃ , , ZrO₂, , Al₂O₃, , SiO₂–Al₂O₃ H_o < –13,7. ZrO₂/Al₂O₃ .

     

μSr studies of free radicals in the gas phase

Muonium (Mu=₊+e^-) is the bound state of a positive muon and an electron. Since the positive muon has a mass about 1/9 of the proton, Mu can be regarded as an ultra light isotope of hydrogen with unusually large mass ratios (MuHDT=1/9123). The muon spin rotation technique (SR) relies on the facts that (1) the muon produced in pion decay, ^{+ +} + , is 100% spin polarized and (2) the positron from muon decay is emitted preferentially along the instantaneous muon spin direction at the time of the muon decay.In transverse field SR (TF-SR), the precession of the muon spin in muonium substituted radicals is directly observed by detecting decay positrons time differentially. From observed radical frequencies, the hyperfine coupling constants (A ) of C₂H₄Mu, C₂D₄Mu,¹³C₂H₄Mu, C₂F₄Mu, and C₂H₃FMu are determined. In the longitudinal field avoided level crossing (LF-ALC) technique, one observes the resonant loss of the muon spin polarization caused by the crossing of hyperfine levels at particular magnetic fields. The LF-ALC method together with the information onA obtained from TF-SR allows one to determine the magnitude and sign of the nuclear hyperfine constants at - and -positions. Results are compared with hydrogen substituted ethyl-radicals and isotope effects are discussed.