微波辅助固相有机反应

固相有机合成是组合化学中构建化合物库的主要工具之一［１,２］,但是,由于它是连接在固相载体（如树脂等）上的试剂与溶解在有机溶剂中的试剂之间的反应,因此反应比较缓慢．考虑到微波技术对有机反应的协助作用,我们将微波技术应用到固相有机反应中,对比研究了微波...     

离子液体载催化剂和载试剂在有机合成中的应用

综述了离子液体载催化剂和载试剂在有机合成中的应用进展. 离子液体载催化剂是针对离子液体中催化剂难以回收利用的问题提出来的, 它不仅可以实现均相催化, 而且反应产物容易分离, 催化剂可以循环使用. 离子液体载有机试剂合成, 又称为离子液体相有机合成, 具有固相反应产物纯度高和液相反应反应快的优点. 在离子液体载无机试剂的反应中, 反应物毒性降低, 反应条件温和, 产物选择性好.     

功能基化聚合物作为高分子试剂在固相有机合成中的应用研究

本文讨论了作者近年在制备功能基化聚合物方面的新方法,所制得的功能基化聚合物和工业离子交换树脂作为高分子载体,试剂和相转移催化剂在固相有机合成中的应用性能,以及功能基结构,反应介质,温度对固相合成反应的影响。     

拉曼光谱在固相有机合成中的应用

本文综述了近几年以来拉曼光谱在固相有机合成中的应用研究进展,分别介绍了近红外傅立叶变换和共焦显微两种拉曼光谱技术。近红外傅立叶变换拉曼光谱克服了荧光背景带来的干扰,可以用在固载试剂、催化剂的表征、固相有机反应的监测等方面,特别对于在无机载体上进行的有机反应的表征和检测方面具有很大的优势。共焦显微拉曼光谱具有特殊的空间分辨能力,适合对固相合成载体的结构进行表征,并可对载体内部反应活性位点的分布情况进行研究。     

固相载体上的环加成反应及其应用

固相有机合成和组合化学是近年来发展起来的快速合成数种有机化合物的新方法。本文介绍了在固相载体上进行的环加成反应, 及其在有机合成及反应机理研究中的应用。     

新型冠醚有机硅聚合物和聚乙二醇有机硅聚合物的相转移催化性能研究

相转移催化反应是一种有机合成新技术,用途甚广。用小分子季铵盐、季磷盐、聚乙二醇、冠醚等作相转移催化剂时,反应一般在互不相溶的两相系统(液-液)或(液-固)中进行。用不溶性聚合物作相转移催化剂时,反应在三相系统(液-液-固)或(液 -固-固)中进行,故后者称为三相催化剂(简称TPC)。由于三相催化剂有易于从反应体系中分离及回收后重复利用之优点,因此受到人们的重视。^[1-2]     

固相有机合成

按照传统的概念,有机反应应当尽量在均相的溶液中进行。近年来,固相合成的发展打破了这一观点的束缚,并给有机合成带来了新的方法和手段。所谓固相合成就是把试剂、催化剂或反应物连接到不溶性的固体的聚合物载体上进行化学反应。这一方法的最大优点是利用聚合物载体不溶解的性质,在反应结束     

硅胶键联MPc的制备及其在氧活化中的作用

过渡金属酞等配合物（MPC）用手均相液相氧化中作催化剂已有不少报导，象许多均相催化剂一样，MPC用于均相反应存在着难于从反应体系中分离出来的问题．把均相配合物催化剂固载在无机氧化物如硅股或有机高分子载体上是解决这一问题的一种方法．我们曾尝试把MP。固载在分子筛载体和硅胶载体上，并用ESR研究其对O2的活化作用[1，2]．本文报导MPc通过共价键键联固载在SiO2上，并研究其对O2的活化作用．1实验部分1．1试剂HSIC13为日本东京化成株式会社产品，二级试剂·发烟硫酸（SO。质量分数大于20％）为分析纯试剂．PCl5为化学纯试…     

树脂上的固相合成.(二).在有机合成中的应用

自1963年Merrifield利用高分子载体(Polymeric supports)进行固相合成(solid phase synthesis)制取多肽以来,固相合成法在有机合成中的应用得到了广泛的发展,在有机合成史上展开了新的一页。前文已介绍了多肽、低聚核苷酸、寡糖的固相合成,本文拟将用固相合成法制取有机化合物分类概述如下:     

负载型钯催化剂用于不饱和化合物的加氢反应

近十多年来,均相络合催化剂的固载化是一个活跃的研究领域^[1-6],我们在聚合、歧化、加氢等络合催化剂负载化方面的工作^[7-9]。说明负载型络合催化剂中的载体,可以视为一个配体,由于其有不同的化学及空间效应,因此是一个复杂的配体.在环戊二烯选择加氢的研究中,不同载体对加氢反应的活性及选择性的影响,说明载体的性质、结构、分子量及其上基团,对于底物的配位和它在活性物种上的加氢速度常数都有调变作用^[10],本文报道固载化络合催化剂在多种不饱和烃加氢反应中的行为.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.