双端羟基预聚物扩链制备高分子量聚对二氧环己酮

以1,4-丁二醇(BD)为引发剂, 辛酸亚锡为催化剂, 引发对二氧环己酮(PDO)开环聚合, 得到双端羟基型聚对二氧环己酮预聚物, 再以六亚甲基二异氰酸酯(HDI)为扩链剂制备高分子量的聚对二氧环己酮. 采用核磁共振谱对预聚物和扩链产物的结构进行了确认, 并详细考察了各种因素对扩链反应的影响. 研究结果表明, 加入适量的HDI, 于150 ℃反应60 min, 扩链效率在预聚物基础上可提高52倍, 而扩链产物的粘均分子量可达到25.7×104 g/mol.     

不同分子量软链段的聚己内酯型聚氨酯扩链反应动力学研究

合成了一系列不同分子量的聚己内酯,进而制备异氰酸根封端的聚己内酯预聚体,用傅里叶变换红外光谱研究了不同分子量的聚己内酯预聚体与二元醇的扩链反应.扩链反应动力学研究结果表明:聚己内酯预聚体与二元醇的扩链反应均为二级反应;随着软链段反应物料分子量的增加,反应速率常数显著降低,但当分子量超过某一范围后,其对反应速率的影响逐渐减小,趋于不变.对于不同硬链段反应物料含量的扩链反应体系,硬链段反应物料含量越高,软链段反应物料分子量对反应速率的影响越明显,而且,当软链段反应物料分子量超过某一范围后,不同体系的反应速率常数间的差值趋于不变.Arrhenius方程中的指前因子(B)随软链段反应物料分子量的变化关系与速率常数对分子量的依赖关系相同;从反应速率常数对温度的依赖关系可见:表观活化能的直线斜率基本相同,扩链反应的活化能主要与官能团的反应活性相关.     

离子液体中聚对苯二甲酰己二胺的合成与表征

以咪唑类离子液体为溶剂、亚磷酸三苯酯(TPP)为活化剂合成了聚对苯二甲酰己二胺(PA6T),考察了反应时间、反应温度、TPP用量和单体浓度对分子量的影响,得到特性黏数[η]为0.49～1.68dL/g的聚合物.与以水为介质在高压釜中(温度220℃、压力1.8MPa、反应5h)合成的预聚物(prePA6T)及再固相缩聚8h的产物(PA6T-SSP-8h)相比,离子液体中容易获得特性黏数[η]高的聚合物(PA6T-IL)、聚合时间明显缩短且反应温度降低.     

HDI作为扩链剂合成含PLLA和PBS链段的聚酯氨酯

以数均分子量为6350g/mol端羟基聚L-乳酸(PLLA-OH)与10500g/mol端羟基聚丁二酸丁二酯(PBS-OH)为预聚物,六亚甲基二异氰酸酯(HDI)为扩链剂,通过熔融反应制备了分子量高达30×104g/mol的可完全生物降解聚酯氨酯(PEU).研究了异氰酸根(NCO)与羟基比例对扩链反应的影响.结果表明,当[NCO]/[OH]=1∶1时,扩链效果最好,PEU分子量最大;PEU分子量随着预聚物中PBS含量增大而提高.通过核磁共振谱(1H-NMR)确定了PEU的结构与组成,并对聚酯氨酯进行了凝胶渗透色谱(GPC)、差示扫描量热(DSC)、热重分析(TGA)以及拉伸性能测试.DSC结果显示,扩链后PEU的结晶主要由PBS链段产生,而PLLA链段几乎不结晶;TGA结果表明,PEU的热降解分两步进行,第一步为PEU中PLLA链段的热降解,第二段为其中PBS链段的降解;拉伸测试结果表明,PBS与PLLA的共聚能够制备拉伸强度与断裂伸长率优异的聚合物材料.     

非手性席夫碱-异丙氧基铝引发外消旋丙交酯的立构选择性聚合

摘要以非手性的席夫碱-异丙氧基铝(Ⅱ)引发外消旋丙交酯(rac-LA)的立构选择性聚合. 其聚合动力学研究结果表明, 聚合反应对于单体符合一级反应动力学. 所得聚合物的数均分子量与单体转化率成正比, 并且分子量分布很窄, 表明该聚合反应具有良好的可控性. 此外所得的聚外消旋乳酸是tm为179 ℃的结晶性聚合物. 13C NMR和同核去偶1H NMR谱表明, 所得的聚乳酸是一种立构嵌段聚合物, 平均嵌段长度为11个乳酸单元.     

1,3-PBO扩链改性端羧基聚乳酸的性能表征

以乳酸为原料、辛酸亚锡为催化剂,采用梯度升温法,在170℃、0.098 MPa条件下直接熔融缩聚合成端羧基共聚物P(LA/SA).将其用2,2-(1,3-亚苯基)-二噁唑啉(1,3-PBO)扩链,按n(—COOH)/n(—oxazoline)=1∶1.4比例加入1,3-PBO,在150℃,0.098 MPa条件下反应15 min制得聚酰胺酯(PEA).采用GPC、FTIR、1H-NMR、DSC、XRD、TGA、SEM等手段对聚合物的结构进行了表征和性能测试.结果表明,与P(LA/SA)相比,扩链产物相对分子质量大幅度提高,重均分子量达36×104;产物Tg比PLA升高,材料的刚性增强;产物热稳定性能提高,为一步分解;产物结晶度较P(LA/SA)降低,其柔韧性较P(LA/SA)增强,但相对于PLA有所降低.     

扩链法制备高分子量聚对二氧环己酮的研究

以辛酸亚锡为催化剂对对二氧环己酮单体(PDO)开环聚合合成聚对二氧环己酮(PPDO),在聚合的后期,用1,6-六亚甲基二异氰酸酯(HDI)为扩链剂进行扩链反应.研究了扩链剂用量对扩链反应的影响,加入相对于PPDO用量的0.78 wt%的HDI就能得到粘均分子量为2.35×105的PPDO.在分子量相近的情况下,扩链后产物的热稳定性和玻璃化转变温度均比未扩链的高,扩链前后的晶型没有发生变化,但结晶度大幅度降低,拉伸性能变化不大.     

不同分子量软链段的聚已内酯型聚氨酯扩链反应动力学研究

合成了一系列不同分子量的聚已内酯，进而制备异氰酸根封端的聚已内酯预聚体，用傅里叶变换红外光谱研究了不同分子量的聚已内酯预聚体与二元醇的扩链反应。扩链反应动力学研究结果表明：聚已内酯预聚体与二元醇的扩链反应均为二级反应；随着软链段反应物料分子量的增加，反应速率常数显著降低，但当分子量超过某一范围后，其对反应速率的影响逐渐减小，趋于不变。对于不同硬链段反应物料含量扩链反应体系，硬链段反应物料含量越高，软链段反应物料分子量对反应速率的影响越明显，而且，当软链段反应物料分子量超过某一范围后，不同体系的反应速率常数间的差值趋于不变。Arrhenius方程中的指前因子（B）随软链段反应物料分子量的变化关系与速率常数对分子量的依赖关系相同；从反应速率常数对温度的依赖关系可见：表观活化能的直线斜率基本相同，扩链反应的活化能主要一官能团的反应活性相关。     

K2S2O8/Na2SO3引发St/BA微乳液共聚合的研究

以十二烷基硫酸钠／十二烷基苯磺酸钠(SDS／SDBS)为乳化剂，过硫酸钾／亚硫酸钠(K2S2O3／Ni2SO3)为引发剂进行苯乙烯／丙烯酸丁酯(SL／BA)微孔液共聚合反应。研究了引发剂浓度[I]OR、单体总浓度[M]、乳化剂含量[E]和聚合温度T对微孔液共聚合最大反应速率Rmax和共聚物粘均分子量^-Mη的影响，测定了共聚单体的竞聚率，结果得到：Rmax∝[I]^0.98OR[M]^0.81[E]^-0．34e^-4712／T，^-Mη∝[I]^-0.27OR[M]^0.48[E]^-0.68e^2304/T；rSt=0.598，rBA=0.0206。     

含1,2-亚乙基单元的双酚A聚碳酸酯非光气法合成和表征

以双酚A(BPA),碳酸乙二酯(EC)和碳酸二甲酯(DMC)为原料,制备双酚A二元醇(Ⅰ)和双酚A碳酸酯(Ⅱ),并用红外光谱与核磁共振波谱对其结构进行表征.通过Ⅰ与Ⅱ的共缩聚反应及Ⅱ的自聚实现了主链中含有—CH2CH2—单元的双酚A型聚碳酸酯(PC)的非光气法合成,用凝胶渗透色谱法(GPC)和TGA-DSC对PC的分子量和热性质进行分析.结果表明,Ⅱ在240℃自聚6h后产物的Mn可达17.6×103,主链中—CH2CH2—单元的引入,可以降低聚合物的Tg,提高其结晶性,所得聚合物具有良好的热稳定性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.