Bis(trifluoroacetyl) peroxide, CF(3)C(O)OOC(O)CF(3)

Pure, highly explosive CF(3)C(O)OOC(O)CF(3) is prepared for the first time by low-temperature reaction between CF(3)C(O)Cl and Na(2)O(2). At room temperature CF(3)C(O)OOC(O)CF(3) is stable for days in the liquid or gaseous state. The melting point is -37.5 degrees C, and the boiling point is extrapolated to 44 degrees C from the vapor pressure curve log p = -1875/T + 8.92 (p/mbar, T/K). Above room temperature the first-order unimolecular decay into C(2)F(6) + CO(2) occurs with an activation energy of 129 kJ mol(-1). CF(3)C(O)OOC(O)CF(3) is a clean source for CF(3) radicals as demonstrated by matrix-isolation experiments. The pure compound is characterized by NMR, vibrational, and UV spectroscopy. The geometric structure is determined by gas electron diffraction and quantum chemical calculations (HF, B3PW91, B3LYP, and MP2 with 6-31G basis sets). The molecule possesses syn-syn conformation (both C=O bonds synperiplanar to the O-O bond) with O-O = 1.426(10) A and dihedral angle phi(C-O-O-C) = 86.5(32) degrees. The density functional calculations reproduce the experimental structure very well.     

Probing adsorption sites of silica-supported platinum with (13)C(16)O + (12)C(16)O and (13)C(18)O + (12)C(16)O mixtures: a comparative fourier transform infrared investigation

A comparative investigation of the adsorption of (13)C(18)O + (12)C(16)O and (13)C(16)O + (12)C(16)O mixtures on silica-supported Pt has been conducted. It is advantageous to use (13)C(18)O + (12)C(16)O mixtures rather than (13)C(16)O + (12)C(16)O to probe the adsorption sites and electronic state of supported Group VIII metals because the vibrational bands of the adsorbed (13)C(18)O and (12)C(16)O isotopic molecules do not overlap. In addition, while an intensity redistribution suppresses the lower-frequency band with adsorbed (13)C(16)O and (12)C(16)O with vibrational frequencies differing by 50 cm(-1), the intensity redistribution is less pronounced with the adsorbed (13)C(18)O and (12)C(16)O in which the frequency difference is 100 cm(-1). Moreover, the small intensity redistribution that does occur between the bands of adsorbed (13)C(18)O and (12)C(16)O still allows the detection of the vibrational band of adsorbed (13)C(18)O at (13)C(18)O gas-phase concentrations as low as 3%. At such low concentrations, the dipole-dipole interaction between adsorbed (13)C(18)O molecules is negligible, and, hence, both the singleton frequency and the dipole-dipole shift for adsorbed CO may be obtained in a single experiment. Two types of strongly bound and one type of weakly bound linear CO-Pt adsorption complexes have been identified and characterized by their singleton frequencies and dipole-dipole coupling shifts. The origin of these CO adsorption modes is discussed.     

Detailed analysis of coupling constants and isotope effects in NMR spectra of isotopomers of (12)C(68) (13)C(2)

A preliminary study of the long-range (i.e. two-bond or longer) (13)C--(13)C coupling constants in natural abundance C(70) shows, consistent with recent theoretical calculations by Peralta et al. that the largest long-range J(CC) values for the polar and equatorial sites are clearly smaller than the largest long-range J(CC) values for the other three sites. The unusually large size of the (2)J(CC) couplings between inequivalent carbons in a nonpolar pentagon in C(70) has no analog among (2)J(CC) data reported for planar aromatic compounds. No long-range J(CC) values appear to have been reported for any curved aromatic compounds. In addition, much more precise (1)J(CC) values were obtained for C(70) than was possible about 15 years ago. Comparing the chemical shifts for each of the five isotopomers of C(70) containing only one (13)C nucleus and the frequencies of the satellites for each of the four isotopomers containing two adjacent and inequivalent (13)C nuclei indicates that replacing (12)C with (13)C shields the adjacent (13)C nucleus by 15 to 23 ppb, consistent with the limited (1)Delta(13)C((13/12)C) isotope effect data available on a few small aromatic molecules. Such measurements become possible with natural abundance C(70) only by using a (13)C cryoprobe and a high-field spectrometer (700 MHz). The additional information that could be obtained from a spectrum obtained under ultrahigh resolution conditions is discussed. Secure identification of the singlets arising from the four (12)C(68) (13)C(2) isotopomers with equivalent adjacent (13)C nuclei is necessary to allow the largest long-range J(CC) values to be precisely determined. The presence of numerous isotopomers containing two or more (13)C nuclei would present a great challenge in interpreting the various signals in a spectrum obtained under ultrahigh resolution conditions.     

Structures and electronic properties of C(56)Cl(8) and C(56)Cl(10) fullerene compounds.

Stimulated by the recent observation of the first C(56)Cl(10) chlorofullerene (Science, 2004, 304, 699), we performed a systematic density functional study of the structures and properties of C(56)Cl(10) and related compounds. The fullerene derivatives C(56)Cl(8) and C(56)Cl(10) based on the parent fullerene C(56)(C(2v):011), rather than those from the most stable C(56) isomer with D(2) symmetry, are predicted to possess the lowest energies, and they are highly aromatic. Further investigations show that the heats of formation of the C(56)Cl(8) and C(56)Cl(10) fullerene derivatives are highly exothermic, that is, -48.59 and -48.89 kcal mol(-1) per Cl(2) (approaching that of C(50)Cl(10)), suggesting that adding eight (or ten) Cl atoms releases much of the strain of pure C(56)(C(2v):011) fullerene and leads to highly stable derivatives. In addition, C(56)Cl(8) and C(56)Cl(10) possess large vertical electron affinities, especially for C(56)Cl(8) with value of 3.20 eV, which is even larger than that (3.04 eV) of C(50)Cl(10), indicating that they are potential good electron acceptors with possible photonic/photovoltaic applications. Finally, the (13)C NMR chemical shifts and infrared spectra of C(56)Cl(8) and C(56)Cl(10) are simulated to facilitate future experimental identification.     

(13)C-(1)H and (13)C-(13)C NMR J-couplings in (13)C-labeled N-acetyl-neuraminic acid: correlations with molecular structure

N-acetyl-neuraminic acid (Neu5Ac, 2) was prepared enzymatically containing single sites of (13)C-enrichment at C1, C2, and C3. Aqueous solutions of the three (13)C isotopomers were studied by (1)H and (13)C NMR spectroscopy at p(2)H 2 and pH 8 to obtain J(CH) and J(CC) values involving the labeled carbons. Experimental studies were complemented by DFT calculations of the same set of J-couplings in protonated and ionized structural mimics of 2 to determine how well theoretical predictions match the experimental findings in saccharides bearing ionizable functionality. Results show that: (a) (2)J(C2,H3ax/eq) values in 2 depend on anomeric configuration, thus complementing (3)J(C1,H3ax/eq) behavior, (b) J(CH) and J(CC) values involving C2 depend on anomeric configuration, the C1-C2 bond torsion, and solution pH, and (c) long-range (4)J(C2,H7) is sensitive to glycerol side-chain conformation. Intraring J(HH) and most (2)J(CH), (3)J(CH), (2)J(CC), and (3)J(CC) involving C1-C3 of 2 appear largely unaffected by the ionization state of the carboxyl group. In vacuo and solvated DFT calculations of geminal and vicinal J(CH) and J(CC) values are similar and reproduce the experimental data well, but better agreement with experiment was observed for (1)J(C1,C2) in the solvated calculations. The present work provides new information for future treatments of trans-glycoside couplings involving Neu5Ac residues by (a) providing new standard values of intraring J(CC) for coupling pathways that mimic those for trans-glycoside J(CC), (b) identifying potential effects of solution pH on trans-glycoside couplings inferred through the behavior of related intraring couplings, and (c) providing specific guidelines for more reliable DFT predictions of J(CH) and J(CC) values in ionizable saccharides.     

A first-principles study of (R)- and (S)-PPA Molecules on Cu(111)

The adsorption of (R)- and (S)-2-phenylpropionamide (PPA, C(9)H(11)ON) molecules on a Cu(111) surface has been investigated using the density functional method with supercell models. The adsorption orientations of both (R)- and (S)-PPA molecules on the surface are the same: the phenyl rings are approximately parallel to the Cu(111) surface and positioned in the hollow sites, the amino and methyl groups occupy two-bridge sites, and the carbonyl occupies the top site. After the adsorption, the bond lengths in the two enantiomers are almost unchanged, but the changes for two dihedral angles show differences, especially for (R)-PPA molecule. The first angles between the (N,C9,C7) plane and the (C9,C7,C6) plane are 19.4 and 0.7 degrees for (R)- and (S)-PPA molecules, respectively, and the second angles between the (C8,C7,C6) plane and the (C7,C6,C5) plane are 74.8 and 0.4 degrees for (R)- and (S)-PPA molecules, respectively. The adsorption energies of (R)- and (S)-PPA molecules are calculated to be -34 and -26 kJ mol(-1), respectively. The simulated scanning tunneling microscopy (STM) images of (R)- and (S)-PPA molecules on the Cu(111) surface display different features and are coincident with the experimental ones. The interaction between the adsorption molecule and the metal surface is found to be responsible for the discrimination of (R)- and (S)-PPA molecules on the surface.     

Synthesis and characterization of 2,6-Dipp(2)-H(3)C(6)SnSnC(6)H(3)-2,6-Dipp(2) (Dipp = C(6)H(3)-2,6-Pr(i)(2)): a tin analogue of an alkyne

The reaction of Sn(Cl)C(6)H(3)-2,6-Dipp(2) (Dipp = C(6)H(3)-2,6-Pr(i)()(2)) with a stoichiometric amount of potassium in benzene affords 2,6-Pr(i)()(2)-H(3)C(6)SnSnC(6)H(3)-2,6-Pr(i)()(2) (1) as dark blue-green crystals. The compound 1 is a tin analogue of an alkyne. It was characterized by (1)H and (13)C NMR and UV-vis spectroscopy, cyclic voltammetry, combustion analysis and X-ray crystallography. The structural data show that 1 has a trans-bent, planar C(ipso)SnSnC(ipso) skeleton with a Sn-Sn bond distance of 2.6675(4) A and a Sn-Sn-C angle of 125.24(7) degrees. The Sn-Sn distance, which is ca. 0.15 A shorter than a conventional Sn-Sn single bond, and the trans-bent structure indicate the presence Sn-Sn multiple bond character unlike the related singly bonded ArPbPbAr species.     

Solution structures and dynamic properties of chelated d(0) metal olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) (R = H, Me): Models for the [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" catalysts.

To model the Ti-olefin interaction in the putative [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" Ti-catalyzed olefin polymerization, chelated alkoxide olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) have been investigated. The reaction of [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(2) (1a,b; R = H, Me) with HOCMe(2)CH(2)CH(2)CH=CH(2) yields mixtures of [eta(5)-C(5)R(4)SiMe(2)NH(t)Bu]TiMe(2)(OCMe(2)CH(2)CH(2)CH=CH(2)) (2a,b) and [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(OCMe(2)CH(2)CH(2)CH=CH(2)) (3a,b). The reaction of 2a/3a and 2b/3b mixtures with B(C(6)F(5))(3) yields the chelated olefin complexes [[eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][MeB(C(6)F(5))(3)] (4a,b; 71 and 89% NMR yield). The reaction of 2b/3b with [Ph(3)C][B(C(6)F(5))(4)] yields [[eta(5): eta(1)-C(5)Me(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][B(C(6)F(5))(4)] (5b, 88% NMR yield). NMR studies establish that 4a,b and 5b exist as mixtures of diastereomers (isomer ratios: 4a/4a', 62/38; 4b/4b', 75/25; 5b/5b', 75/25), which differ in the enantioface of the olefin that is coordinated. NMR data for these d(0) metal olefin complexes show that the olefin coordinates to Ti in an unsymmetrical fashion primarily through C(term) such that the C=C pi bond is polarized with positive charge buildup on C(int). Dynamic NMR studies show that 4b/4b' undergoes olefin face exchange by a dissociative mechanism which is accompanied by fast inversion of configuration at Ti ("O-shift") in the olefin-dissociated intermediate. The activation parameters for the conversion of 4b to 4b' (i.e., 4b/4b' face exchange) are: DeltaH = 17.2(8) kcal/mol; DeltaS = 8(1) eu. 4a/4a' also undergoes olefin face exchange but with a lower barrier (DeltaH = 12.2(9) kcal/mol; DeltaS = -2(3) eu), for the conversion of 4a to 4a'.     

Measurement of (13)C(alpha)-(13)C(beta) dipolar couplings in (15)N,(13)C,(2)H-labeled proteins: application to domain orientation in maltose binding protein.

TROSY-based HN(CO)CA 2D and 3D pulse schemes are presented for measurement of (13)C(alpha)-(13)C(beta) dipolar couplings in high molecular weight (15)N,(13)C,(2)H-labeled proteins. In one approach, (13)C(alpha)-(13)C(beta) dipolar couplings are obtained directly from the time modulation of cross-peak intensities in a set of 2D (15)N-(1)HN correlated spectra recorded in both the presence and absence of aligning media. In a second approach 3D data sets are recorded with (13)C(alpha)-(13)C(beta) couplings encoded in a frequency dimension. The utility of the experiments is demonstrated with an application to an (15)N,(13)C,(2)H-labeled sample of the ligand free form of maltose binding protein. A comparison of experimental dipolar couplings with those predicted from the X-ray structure of the apo form of this two-domain protein establishes that the relative orientation of the domains in solution and in the crystal state are very similar. This is in contrast to the situation for maltose binding protein in complex with beta-cyclodextrin where the solution structure can be generated from the crystal state via a 11 degrees domain closure.     

Dinuclear oxidative addition of N-H and S-H bonds at chromium. Reaction of (*)Cr(CO)(3)(C(5)Me(5)) with [o-(HA)C(6)H(4)S-Cr(CO)(3)(C(5)Me(5))] (A = S,NH) yielding [eta(2)-o-(mu-A)C(6)H(4)S-Cr(C(5)Me(5))](2) and H-Cr(CO)(3)(C(5)Me(5))

Reaction of the 17-electron radical (*)Cr(CO)(3)Cp* (Cp* = C(5)Me(5)) with 0.5 equiv of 2-aminophenyl disulfide [(o-H(2)NC(6)H(4))(2)S(2)] results in rapid oxidative addition to form the initial product (o-H(2)N)C(6)H(4)S-Cr(CO)(3)Cp*. Addition of a second equivalent of (*)Cr(CO)(3)Cp* to this solution results in the formation of H-Cr(CO)(3)Cp* as well as (1)/(2)[[eta(2)-o-(mu-NH)C(6)H(4)S]CrCp*](2). Spectroscopic data show that (o-H(2)N)C(6)H(4)S-Cr(CO)(3)Cp* loses CO to form [eta(2)-(o-H(2)N)C(6)H(4)S]Cr(CO)(2)Cp*. Attack on the N-H bond of the coordinated amine by (*)Cr(CO)(3)Cp* provides a reasonable mechanism consistent with the observation that both chelate formation and oxidative addition of the N-H bond are faster under argon than under CO atmosphere. The N-H bonds of uncoordinated aniline do not react with (*)Cr(CO)(3)Cp*. Reaction of the 2 mol of (*)Cr(CO)(3)Cp* with 1,2-benzene dithiol [1,2-C(6)H(4)(SH)(2)] yields the initial product (o-HS)C(6)H(4)S-Cr(CO)(3)Cp and 1 mol of H-Cr(CO)(3)Cp*. Addition of 1 equiv more of (*)Cr(CO)(3)Cp to this solution also results in the formation of 1 equiv of H-Cr(CO)(3)Cp*, as well as the dimeric product (1)/(2)[[eta(2)-o-(mu-S)C(6)H(4)S]CrCp*](2). This reaction also occurs more rapidly under Ar than under CO, consistent with intramolecular coordination of the second thiol group prior to oxidative addition. The crystal structures of [[eta(2)-o-(mu-NH)C(6)H(4)S]CrCp*](2) and [[eta(2)-o-(mu-S)C(6)H(4)S]CrCp*](2) are reported.     

The First Organoxenon(IV) Compound: Pentafluorophenyldifluoroxenonium(IV) Tetrafluoroborate

Xenon(IV) - carbon bonding has been realized for the first time in the product formed from the reaction of XeF(4) with C(6)F(5)BF(2) in CH(2)Cl(2) at -55 degrees C [Eq. (1)]. [C(6)F(5)XeF(2)][BF(4)] is a strong oxidative fluorinating agent. This xenon(IV) compound fluorinates (C(6)F(5))(3)P to (C(6)F(5))(3)PF(2), C(6)F(5)I to C(6)F(5)IF(2), and I(2) to IF(5). In all cases, [C(6)F(5)Xe][BF(4)] was obtained as a by-product.     

Structure and magnetic properties of (meso-tetraphenylporphinato)manganese(III) bis(dithiolato)nickelates

The crystal structures of [MnTPP]{Ni[S2C2H(CN)]2} [MnTPP = (meso-tetraphenylporphinato)manganese(III)] and [MnTPP]{Ni[S2C2(CN)2]2} have been determined. These salts possess trans-mu-coordination of S = 1/2 {Ni[S2C2H(CN)]2}*- and {Ni[S(2)C(2)(CN)(2)](2)}*- to Mn(III) and form parallel 1-D coordination polymer chains exhibiting nu(CN) at 2210 and 2200 and 2220 and 2212 cm(-1), respectively. The bis(dithiolato) monoanions are planar and bridge two cations with MnN distances of 2.339(16), and 2.394(3) A, respectively, which are comparable to related MnN distances observed for [MnTPP][TCNE].x(solvates). In addition, [MnTP'P]{Ni[S2C2(CN)2]2} {H2TP'P = meso-tetrakis[3,5-di-tert-butyl-4-hydroxyphenyl)porphyrin] and [MnTP'P(OH2)]{Ni[S2C2(CN)2]2} were prepared. The latter forms isolated paramagnetic ions. The room-temperature values of chiT for 1-D [MnTPP]{Ni[S2C2H(CN)]2}, [MnTPP]{Ni[S2C2(CN)2]2}, and [MnTP'P]{Ni[S2C2(CN)2]2} are 2.55, 3.28, and 2.86 emu K/mol, respectively. Susceptibility (chi) measurements between 2 and 300 K reveal weak antiferromagnetic interactions with theta= -5.9 and -0.2 K for [MnTPP]{Ni[S(2)C(2)H(CN)](2)} and [MnTPP]{Ni[S2C2(CN)2]2}, respectively, and stronger antiferromagnetic coupling of -50 K for [MnTP'P]{Ni[S2C2(CN)2]2} from fits of chi(T) to the Curie-Weiss law. The 1-D intrachain coupling, J(intra), of [MnTPP]{Ni[S2C2H(CN)]2} and [MnTPP]{Ni[S2C2(CN)2]2} was determined from modeling chiT(T) by the Seiden expression (H = -2JSi.Sj) with J/kB = -8.00 K (-5.55 cm(-1); -0.65 meV) for [MnTPP]{Ni[S2C2H(CN)]2}, J/kB = -3.00 K (-2.08 cm(-1); -0.25 meV) for [MnTP'P]{Ni[S2C2(CN)2]2}, and J/kB = -122 K (-85 cm(-1)) for [MnTP'P]{Ni[S2C2(CN)2]2}. These observed negative J(intra)/kB values are indicative of antiferromagnetic coupling. These materials order as ferrimagnets at 5.5, 2.3, and 8.0 K, for [MnTPP]{Ni[S2C2H(CN)]2}, [MnTPP]{Ni[S2C2(CN)2]2}, and [MnTP'P]{Ni[S2C2(CN)2]2}, respectively, based upon the temperature at which maximum in the 10 Hz chi'(T) data occurs. [MnTP'P]{Ni[S2C2(CN)2]2} has a coercivity of 17,700 Oe and remanent magnetizations of 7250 emu Oe/mol at 2 K and 17 Oe and 850 emu Oe/mol at 5 K; hence, upon cooling it goes from being a soft magnet to being a very hard magnet.     

Synthesis, structure, and ligand-based reduction reactivity of trivalent organosamarium benzene chalcogenolate complexes (C(5)Me(5))(2)Sm(EPh)(THF) and [(C(5)Me(5))(2)Sm(mu-EPh)](2)

To compare the ligand-based reduction chemistry of (EPh)(-) ligands in a metallocene environment to the sterically induced reduction chemistry of the (C(5)Me(5))(-) ligands in (C(5)Me(5))(3)Sm, (C(5)Me(5))(2)Sm(EPh) (E = S, Se, Te) complexes were synthesized and treated with substrates reduced by (C(5)Me(5))(3)Sm: cyclooctatetraene; azobenzene; phenazine. Reactions of PhEEPh with (C(5)Me(5))(2)Sm(THF)(2) and (C(5)Me(5))(2)Sm produced THF-solvated monometallic complexes, (C(5)Me(5))(2)Sm(EPh)(THF), and their unsolvated dimeric analogues, [(C(5)Me(5))(2)Sm(mu-EPh)](2), respectively. Both sets of the paramagnetic benzene chalcogenolate complexes were definitively identified by X-crystallography and form homologous series. Only the (TePh)(-) complexes show reduction reactivity and only upon heating to 65 degrees C.     

Coordinatively unsaturated W(IV)-bis(pyridine) complexes, a reactive source of W(IV)

Addition of 2 equiv of a sigma-donor ligand (L = pyridine, 4-picoline, or quinoline) to complexes of the type [W(NPh)(eta(4)-arene)(o-(Me3SiN)2C6H4)] (arene = CH3CH2C6H5 (3), CH3CH2CH2C6H5 (4)) gave the W(IV)L2 compounds, [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2] (5), [W(NPh)(o-(Me3SiN)2C6H4)(p-C6H7N)2] (6), and [W(NPh)(o-(Me3SiN)2C6H4)(C9H7N)2] (7). Synthesis of compounds 5 and 6 by Na degrees reduction of [W(NPh)(o-(Me3SiN)2C6H4)Cl2] in the presence of 3 equiv of L (L = 5, pyridine or 6, 4-picoline) is also presented. Compounds 5, 6, and 7 display hindered rotation of the donor ligands about the W-N bonds, resulting from a steric interaction with the Me3Si groups of the diamide ligand. The coordinative unsaturation of 5 and 6 has also been explored. Compounds 5 and 6 readily react with either CO and PMe3 to generated the six coordinate complexes [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)2(CO)] (8a), [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)2(CO)] (8b), [W(NPh)(o-(Me3SiN)2C6H4)(C5H5N)(PMe3)2] (10a), and [W(NPh)(o-(Me3SiN)2C6H4)(C6H7N)(PMe3)2] (10b), respectively.     

A stereoselective synthesis of the C(3)-C(13) and C(14)-C(24) fragments of macrolactin A

Synthetic studies towards(he C(3)-C(13)and C(14)-C(24)segments(3,4)of the potent antiviral and antitumor compound macrolactin A(1)are presented.Compound 3 was constructed via a convergent and facile approach,exploiting Wittig olefination to generate the sensitive E,Z-diene moiety.Compound 4 was synthesized from the chiral-pod derived sul-fone 39a via an o-alkylation-desulfonation reaction sequence.Cu(Ⅱ)-catalyzed coupling of a Grignard reagent with an al-lylic bromide and Julia olefination were also investigated for the preparation of compound 4.     

Coordination chemistry of silver(I) with the nitrogen-bridged ligands (C(6)H(5))(2)PN(H)P(C(6)H(5))(2) and (C(6)H(5))(2)PN(CH(3))P(C(6)H(5))(2): the effect of alkylating the nitrogen bridge on ligand bridging versus chelating behavior

The coordination chemistry of silver(I) with the nitrogen-bridged ligands (C(6)H(5))(2)PN(R)P(C(6)H(5))(2) [R = H (dppa); R = CH(3) (dppma)] has been investigated by (31)P NMR and electrospray mass spectrometry (ESMS). Species observed by (31)P NMR include Ag(2)(mu-dppa)(2+), Ag(2)(mu-dppa)(2)(2+), Ag(2)(mu-dppa)(3)(2+), Ag(2)(mu-dppma)(2+), Ag(2)(mu-dppma)(2)(2+), and Ag(eta(2)-dppma)(2)(+). Species observed by ESMS at low cone voltages were Ag(2)(dppa)(2)(2+), Ag(2)(dppa)(3)(2+), Ag(2)(dppma)(2)(2+), and Ag(dppma)(2)(+). (C(6)H(5))(2)PN(CH(3))P(C(6)H(5))(2) showed a strong tendency to chelate, while (C(6)H(5))(2)PN(H)P(C(6)H(5))(2) preferred to bridge. Differences in the bridging versus chelating behavior of the ligands are assigned to the Thorpe-Ingold effect, where the methyl group on nitrogen sterically interacts with the phenyl groups on phosphorus. The crystal structure of the three-coordinate dinuclear silver(I) complex (Ag(2)[(C(6)H(5))(2)PN(H)P(C(6)H(5))(2)](3))(BF(4))(2) has been determined. Bond distances include Ag-Ag = 2.812(1) A, Ag(1)-P(av) = 2.492(3) A, and Ag(2)-P(av) = 2.509(3) A. The compound crystallizes in the monoclinic space group Cc at 294 K, with a = 18.102(4)(o), Z = 4, V = 7261(3) A(3), R = 0.0503, and R(W) = 0.0670.     

Reduction of (imine)Pt(IV) to (imine)Pt(II) complexes with carbonyl-stabilized phosphorus ylides

A novel method is reported for generation of the difficult-to-obtain (imine)Pt(II) compounds that involves reduction of the corresponding readily available Pt(IV)-based imines by carbonyl-stabilized phosphorus ylides, Ph3P=CHCO2R, in nonaqueous media. The reaction between neutral (imino)Pt(IV) compounds [PtCl4[NH=C(Me)ON=CR1R2]2] [R1R2 = Me2, (CH2)4, (CH2)5, (Me)C(Me)=NOH], [PtCl4[NH=C(Me)ONR2]2] (R = Me, Et, CH2Ph), (R1 = H; R2 = Ph or C6H4Me; R3 = Me) as well as anionic-type platinum(IV) complexes (Ph3PCH2Ph)[PtCl5[NH=C(Me)ON=CR2]] [R2 = Me2, (CH2)4, (CH2)5] and 1 equiv of Ph3P=CHCO2R (R = Me, Et) proceeds under mild conditions (ca. 4 h, room temperature) to give selectively the platinum(II) products (in good to excellent isolated yields) without further reduction of the platinum center. All thus prepared compounds (excluding previously described Delta4-1,2,4-oxadiazoline complexes) were characterized by elemental analyses, FAB mass spectrometry, IR and 1H, 13C[1H], 31P[1H] and 195Pt NMR spectroscopies, and X-ray single-crystal diffractometry, the latter for [PtCl2[NH=C(Me)ON=CMe2]2] [crystal system tetragonal, space group P4(2)/n (No. 86), a = b = 10.5050(10) A, c = 15.916(3) A] and (Ph3PCH2CO2Me)[PtCl3(NCMe)] [crystal system orthorhombic, space group Pna2(1) (No. 33), a = 19.661(7) A, b = 12.486(4) A, c = 10.149(3) A]. The reaction is also extended to a variety of other Pt(II)/Pt(IV) couples, and the ylides Ph3P=CHCO2R are introduced as mild and selective reducing agents of wide applicability for the conversion of Pt(IV) to Pt(II) species in nonaqueous media, a route that is especially useful in the case of compounds that cannot be prepared directly from Pt(II) precursors, and for the generation of systematic series of Pt(II)/Pt(IV) complexes for biological studies.     

Anticancer cyclometalated [Au(III)m(C(wedge)N(wedge)C)mL]n+ compounds: Synthesis and cytotoxic properties

A series of cyclometalated gold(III) compounds [Au(m)(C(wedge)N(wedge)C)mL]n+ (m = 1-3; n = 0-3; HC(wedge)N(wedge)CH = 2,6-diphenylpyridine) was prepared by ligand substitution reaction of L with N-donor or phosphine ligands. The [Au(m)(C(wedge)N(wedge)C)mL]n+ compounds are stable in solution in the presence of glutathione. Crystal structures of the gold(III) compounds containing bridging bi- and tridentate phosphino ligands reveal the presence of weak intramolecular pi pi stacking between the [Au(C(wedge)N(wedge)C)]+ units. Results of MTT assays demonstrated that the [Au(m)(C(wedge)N(wedge)C)mL]n+ compounds containing nontoxic N-donor auxiliary ligands (2) exert anticancer potency comparable to that of cisplatin, with IC50 values ranging from 1.5 to 84 microM. The use of [Au(C(wedge)N(wedge)C)(1-methylimidazole)]+ (2 a) as a model compound revealed that the gold(III)-induced cytotoxicity occurs through an apoptotic cell-death pathway. The cell-free interaction of 2 a with double-stranded DNA was also examined. Absorption titration showed that 2 a binds to calf-thymus DNA (ctDNA) with a binding constant of 4.5 x 10(5) dm3 mol(-1) at 298 K. Evidence from gel-mobility-shift assays and viscosity measurements supports an intercalating binding mode for the 2 a-DNA interaction. Cell-cycle analysis revealed that 2 a causes S-phase cell arrest after incubation for 24 and 48 hours. The cytotoxicity of 3 b-g toward cancer cells (IC50 = 0.04-4.3 microM) correlates to that of the metal-free phosphine ligands (IC50 = 0.1-38.0 microM), with [Au2(C(wedge)N(wedge)C)2(mu-dppp)]2+ (3 d) and dppp (dppp = 1,2-bis(diphenylphosphino)propane) being the most cytotoxic gold(III) and metal-free compounds, respectively. Compound 3 d shows a cytotoxicity at least ten-fold higher than the other gold(III) analogues; in vitro cellular-uptake experiments reveal similar absorptions for all the gold(III) compounds into nasopharyngeal carcinoma cells (SUNE1) (1.18-3.81 ng/cell; c.f., 3 d = 2.04 ng/cell), suggesting the presence of non-gold-mediated cytotoxicity. Unlike 2 a, both gold(III) compounds [Au(C(wedge)N(wedge)C)(PPh3)]+ (3 a) (PPh3 = triphenylphosphine) and [Au2(C(wedge)N(wedge)C)2(mu-dppp)]2+ (3 d) interact only weakly with ctDNA and do not arrest the cell cycle.     

Thermodynamics, kinetics, and mechanism of (silox)3M(olefin) to (silox)3M(alkylidene) rearrangements (silox = tBu3SiO; M = Nb, Ta)

Olefin complexes (silox)(3)M(ole) (silox = (t)Bu(3)SiO; M = Nb (1-ole), Ta (2-ole); ole = C(2)H(4), C(2)H(3)Me, C(2)H(3)Et, C(2)H(3)C(6)H(4)-p-X (X = OMe, H, CF(3)), C(2)H(3)(t)Bu, (c)C(5)H(8), (c)C(6)H(10), (c)C(7)H(10) (norbornene)) rearrange to alkylidene isomers (silox)(3)M(alk) (M = Nb (1=alk), Ta (2=alk); alk = CHMe, CHEt, CH(n)Pr, CHCH(2)C(6)H(4)-p-X (X = OMe, H, CF(3) (Ta only)), CHCH(2)(t)Bu, (c)C(5)H(8), (c)C(6)H(10), (c)C(7)H(10) (norbornylidene)). Kinetics and labeling experiments suggest that the rearrangement proceeds via a delta-abstraction on a silox CH bond by the beta-olefin carbon to give (silox)(2)RM(kappa(2)-O,C-OSi(t)Bu(2)CMe(2)CH(2)) (M = Nb (4-R), Ta (6-R); R = Me, Et, (n)Pr, (n)Bu, CH(2)CH(2)C(6)H(4)-p-X (X = OMe, H, CF(3) (Ta only)), CH(2)CH(2)(t)Bu, (c)C(5)H(9), (c)C(6)H(11), (c)C(7)H(11) (norbornyl)). A subsequent alpha-abstraction by the cylometalated "arm" of the intermediate on an alpha-CH bond of R generates the alkylidene 1=alk or 2=alk. Equilibrations of 1-ole with ole' to give 1-ole' and ole, and relevant calculations on 1-ole and 2-ole, permit interpretation of all relative ground and transition state energies for the complexes of either metal.     

Studies directed toward the total synthesis of azaspiracid: stereoselective construction of C(1)-C(12), C(13)-C(19), and C(21)-C(25) fragments

[reaction: see text] The efficient entry to the C(1)-C(12), C(13)-C(19), and C(21)-C(25) fragments of azaspiracid is outlined. The C(1)-C(12) portion is constructed using a key asymmetric allenyl borane addition to the corresponding alpha,beta-unsaturated aldehyde. The synthesis of the C(13)-C(19) portion utilizes an Evans asymmetric alkylation followed by Sharpless asymmetric dihydroxylation. In addition, a novel solution to the mismatched effects of a neighboring chiral oxazolidinone during a Sharpless dihydroxylation is detailed.