三氯化锑和二氧杂环己烷配合物[SbCl3·{(CH2)4O2}1.5]的合成与晶体结构

New solid complex of the antimony trichloride and dioxane was obtained th rough a reaction of the dioxane and the absolute methanol solution of the antimony trichloride.The formula of the complex is[SbCl₃·{(CH₂)₄O₂}_1.5].The crystal structure of the complex belongs to cubic system,space group I-43d,a=17.1417(5)Å,Z =16.The trivalent antimony ion n ot only bonds directly to three chlorine anions,but also is coordinated by three oxygen atoms of th e dioxane molecules.Two oxygen atoms in a dioxane molecule will coordinate to different antimony ions,respectively.     

Effect of the structure of Ti-Sb-O catalysts on their acid-base properties,surface oxygen binding energy,and catalytic properties in propylene ammoxidation

The structure of Ti-Sb-O catalysts, namely, a solid solution of antimony ions in rutile-type TiO₂ and the titanium antimonate TiSb₂O₆, is characterized by X-ray diffraction, high-resolution electron microscopy, calorimetry, and IR spectroscopy. The structure effects on the acid-base properties and the surface oxygen binding energy are considered, as well as the correlation of these characteristics with the catalytic properties of the Ti-Sb-O system in propylene ammoxidation. The solid solution has a regular crystal structure. As a consequence, the surface has high concentrations of strong aprotic acid and strong basic sites and is characterized by a high surface oxygen binding energy. In the titanium antimonate structure, extended crystallographic shear defects cause a marked enrichment of the surface with antimony and, accordingly, an increase in the relative concentration of weak aprotic acid sites and a decrease in the surface oxygen binding energy. The changes of the structure and acid-base properties of the surface in passing from the solid solution to TiSb₂O₆ result in an increase in the acrylonitrile selectivity.     

New description of heterogeneity effects in adsorption from multicomponent solutions and liquid adsorption chromatography

General equations describing adsorption from solutions on solids and liquid adsorption chromatography with mixed mobile phases are formulated in terms of the bulk and surface activity coefficeints. Definition of the surface activity coefficients is extended; they describe nonideality of surface solution due to difference in molecular interactions of the components as well as nonideality of this solution generated by the adsorbent heterogeneity. It is shown that the above general equations predict simpler expressions known already in the literature.     

Synthesis,Structural Characterization,and Optical Properties of Benzene-Fused Tetracyclic and Pentacyclic Stiboles

The expectation that antimony (Sb) compounds should display phosphorescence emissions based on the “heavy element effect” prompted our interest in the introduction of antimony to a biaryl as the bridging atom in a fused heterole system. Herein, the synthesis, molecular structures, and optical properties of novel benzene-fused heteroacenes containing antimony or arsenic atoms are described. The stiboles and arsole were prepared by the condensation of dibromo(phenyl)stibane or dichloro(phenyl)arsine with dilithium intermediates derived from the corresponding dibromo compounds. Nuclear magnetic resonance (NMR) spectroscopy and X-ray crystal analysis revealed that the linear pentacyclic stibole was highly symmetric in both the solution and crystal states. In contrast, the curved pentacyclic stibole adopted a helical structure in solution, and surprisingly, only M helical molecules were crystallized from the racemate. All synthesized compounds produced very weak or no emissions at room temperature or in the solid state. In contrast, the linear penta- and tetracyclic stiboles exhibited clear phosphorescence emissions in the CHCl₃ frozen matrix at 77 K under aerobic conditions.     

巯基乙酸锑(Ⅲ)配合物合成与晶体结构

以三氧化二锑和巯基乙酸在水溶液中反应合成了配合物HSb(SCH2COO)2,并通过元素分析、红外光谱、X射线粉末衍射进行了表征,利用单晶X射线四圆衍射法测定了晶体结构,结果表明该配合物晶体属于单斜晶系,C2/c空间群,晶胞参数为:a=1.40005(8)nm,b=1.19121(8)nm,c=1.23588(8)nm,β=126.822(1)°,V=1.6499(2)nm^3,Dc=2.439g·cm^-3,Z=8,R1=0.0250。并对X射线粉末衍射数据进行了指标化,其结果与单晶数据吻合。     

Sn1-xSbxO2固溶体电极的形成能与电子结构

为研究Sb掺杂对Ti/SnO2电极稳定性与导电性的影响, 采用基于密度泛函理论的平面波赝势方法对金红石型SnO2及不同比例Sb掺杂SnO2体系进行了第一性原理计算, 用广义梯度近似方法优化了Sn1-xSbxO2固溶体电极的晶体结构, 计算了掺杂前后体系的电子结构以及不同掺杂比例时的形成能. 结果表明: Sb替代Sn后, 晶格常数与晶胞体积均增加, 但掺杂形成能随掺杂量变化不大, 在掺杂量为0.083时掺杂形成能达到最低值5.08 eV,稳定性最好. 掺杂Sb后, 在费米能级至最低导带处存在Sb 5s电子态分布, 产生施主能级; 同时Sb掺杂后, 在导带底形成的可填充电子数也从未掺杂的4增加到了掺杂后的19, 导电性明显增强, 且在掺杂量为0.063时导电性最强. 本文的计算结果为钛基Sn1-xSbxO2氧化物电极的开发与应用提供了理论依据.     

Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges

A novel and simple method for inorganic antimony speciation is described based on selective solid phase extraction (SPE) separation of antimony(III) and highly sensitive inductively coupled plasma mass spectrometric (ICP-MS) detection of total antimony and antimony(V) in the aqueous phase of the sample. Non-polar SPE cartridges, such as the Isolute silica-based octyl (C8) sorbent-containing cartridge, selectively retained the Sb(III) complex with ammonium pyrrolidine dithiocarbamate (APDC), while the uncomplexed Sb(V) remained as a free species in the solution and passed through the cartridge. The Sb(III) concentration was calculated as the difference between total antimony and Sb(V) concentrations. The detection limit was 1 ng L(-1) antimony. Factors affecting the separation and detection of antimony species were investigated. Acidification of samples led to partial or complete retention of Sb(V) on C8 cartridge. Foreign ions tending to complex with Sb(III) or APDC did not interfere with the retention behavior of the Sb(III)-APDC complex. This method has been successfully applied to antimony speciation of various types of water samples.     

Antimony determination and speciation by multisyringe flow injection analysis with hydride generation-atomic fluorescence detection

A new analytical procedure for determination of inorganic antimony and speciation of antimony(III) and antimony(V) is presented. For this purpose, a software-controlled time-based multisyringe flow injection system, which contains a multisyringe burette provided with a multi-port selection valve, was developed. Hydride generation-atomic fluorescence spectrometry was used as a detection technique. A 0.3% (w/v) reducing sodium tetrahydroborate solution, hydrochloric acid (2 M), an antimony solution and a pre-reducing solution of 10% (w/v) KI and 0.3% (w/v) ascorbic acid are dispensed simultaneously into a gas-liquid separation cell with further propulsion of the reaction product into the flame of an atomic fluorescence spectrometer using argon flow. A hydrogen flow was employed to support the flame.The linear range and the detection limit (3s_b/S) of the proposed technique were 0.2-5.6 μg l⁻¹ and 0.08 μg l⁻¹, respectively. A sample throughput of 18 samples per hour (corresponding to 80 injections per hour) was achieved. The relative standard deviation for 18 independent measurements was 4.6%. This technique was validated by means of reference solid and water materials with good agreement with the certified values. Satisfactory results for speciation of Sb(III) and Sb(V) by means of the developed technique were obtained.     

Application of the vacancy solution theory to describe the enthalpic effects accompanying mixed-gas adsorption

The possibility of utilizing vacancy solution theory (VST) to study the enthalpic effects accompanying mixed-gas adsorption equilibria is presented. Besides heterogeneity, the interaction effects by using the regular adsorbed solution, Flory-Huggins, and Wilson models of nonideality in the adsorbed phase are taken into account. To predict adsorption phase diagrams and calorimetric effects in the mixed-gas adsorption system, only a knowledge of the single-gas adsorption isotherms and accompanying calorimetric effects is required. The possibility of simplification of the obtained theoretical expressions is shown. The obtained agreement between theory and experiment is very satisfactory.     

Influence of the structure of the hydrophobe on the ideality of mixing in micelles in binary mixtures of amphiphilic tricyclic drugs

The composition of the micelles in binary mixtures of the cationic amphiphilic antidepressant drugs nortriptyline, amitriptyline, and doxepin has been determined from an analysis of the variation of the critical micelle concentration from conductivity measurements, as a function of solution composition. Assessment of the nonideality of mixing in terms of the interaction parameter from the regular solution approximation showed small deviations from ideal mixing, with negative interaction parameters for nortriptyline/amitriptyline systems and positive interaction parameters for mixtures of nortriptyline and doxepin. These differences in nonideality have been attributed to differences in the packing of the drugs in the mixed micelles arising from differences in the structure of the hydrophobe.     

Calculation of the limiting activity coefficients of components in a solution from isothermal data on the equilibrium compositions of liquid and vapor phases

The method of calculating the limiting activity coefficients of components was developed and illustrated by a number of examples. Isothermal binary data on the compositions of the solution and vapor coexisting phases were fitted to the Porter, Margules, Van Laar, Wilson, Redlich-Kister, and NRTL interpolation equations. In this method, nonideality of a vapor phase is directly taken into account and the composition of the azeotrope in the system, if exists, may be calculated.     

Thermodynamic properties of solid solutions of silica in forsterite (Mg2Si1+γO4+2γ)

From solid state electrochemical measurements on Mg₂SiO₄SiO₂ solid solutions in air at 1300 K ≤ T ≤ 1780 K the thermodynamic (excess) functions are calculated. A pronounced nonideality is found.     

HPLC Determination of some antibilharzial antimonials by extraction of antimony

The antimonial drug (antimony potassium tartrate, antimony piperazine tartrate or antimony lithium thiomaleate) in aqueous solution or biological fluid is treated with sodium diethyldithiocarbamate in the presence of a suitable masking reagent, the pH is adjusted to 9 +/- 0.5. and the antimony complex extracted with n-hexane and determined by reversed-phase HPLC with an ODS column and detection at 254 nm. The limits of detection are 20 ng (for antimony potassium tartrate and antimony lithium thiomaleate) and 16 ng (for antimony piperazine tartrate).     

固固反应合成三碘化锑、三碘化铋的硫脲配合物(英文)

通过三碘化锑和三碘化铋与硫脲间的室温固固反应合成了三碘化锑、三碘化铋的硫脲配合物 ,其组成通式为 :M(CS(NH2 ) 2 ) 3 I3 (M =Sb ,Bi) .两种配合物的晶体结构均属于单斜晶系 ,锑配合物Sb(CS(NH2 ) 2 ) 3 I3 的晶胞参数为 :a =1.4 772nm ,b=1.6 5 82nm ,c =2 .0 6 74nm ,β =90 .81°,铋配合物Bi(CS(NH2 ) 2 ) 3 I3 的晶胞参数为 :a =1.4 0 10nm ,b =2 .0 16 8nm ,c =2 .0 397nm ,β =90 .84° .远红外光谱表明硫脲中的N原子而非硫原子参与了配位     

固固反应合成三碘化锑、三碘化铋与硫脲配合物

通过三碘化锑和三碘化铋与硫脲间的室温固固反应合成了三碘化锑、三碘化铋的硫脲配合物 ,其组成为 :M[CS( NH2 ) 2 ]3 I3 ( M=Sb,Bi)。两种配合物的晶体结构均属于单斜晶系 ,锑配合物 Sb[CS( NH2 ) 2 ]3 I3 的晶胞参数为 :a=1 .4 772 nm,b=1 .6 5 82 nm,c=2 .0 6 74 nm,β=90 .81°,铋配合物 Bi[CS( NH2 ) 2 ]3 I3 的晶胞参数为 :a=1 .4 0 1 0 nm,b=2 .0 1 6 8nm,c=2 .0 397nm,β=90 .84°。远红外光谱表明硫脲中的 N原子而非硫原子参与了配位     

Speciation of Antimony in Leaching Solution in Contact with Plastic by Novel Liquid-Liquid Microextraction and Graphite Furnace Atomic Absorption Spectrometry

A novel, simple, sensitive, and efficient method for the speciation of inorganic antimony by dispersive liquid–liquid microextraction (DLLME) combined with graphite furnace atomic absorption spectrometry (GF-AAS) is reported. The method uses a hydrophobic complex of antimony(III) with a new chelating agent, 1,2,6-hexanetriol trithioglycolate, at neutral pH. The complex was extracted into the organic phase, whereas antimony(V) remained in aqueous solution. The concentration of antimony(V) was obtained by subtracting the antimony(III) concentration from the total antimony concentration following the reduction of antimony(V) to antimony(III) by L-cysteine. The pH, extraction and dispersive solvents and volumes, and concentration of 1,2,6 -hexanetriol trithioglycolate were optimized. Under the optimized conditions, the analytical curve was linear from 0.26 to 3.2 micrograms per liter with a limit of detection of 27.0 nanograms per liter for antimony(III). The relative standard deviation was 6.8 percent at 0.52 microgram per liter antimony(III) with an enrichment factor of twenty-six. The method was employed for the speciation of antimony in leaching solution in contact with plastic; and the recoveries in fortified samples were between 94.2 and 118.0 percent.     

La Méthylfluorone,réactif spécifique De L'antimoine

The purity of the methyl fluorone was controlled by the melting point of its acctyl derivative. Methyl fluorone is stable in the solid state, but not in ethyl alcohol solution. The solubility of the pure methyl fluorone which we prepared is 0.095% in ethyl alcohol, only a fifth of the solubility of the product used by P. Wenger, R. Duckert and Cl. Blancpain.We prefer the filter paper technique to that of a spotting plate or micro test tube. We were led to reject the use of tartaric solutions pH 4. recommended by the abovementioned authors, and prefer solutions in 1 N HCl.In employing the filter paper impregnated with a drop of the saturated alcoholic solution of methyl fluorone, antimony and molybdenum produce a colour change from yellow to red. germanium and tin a slight change from yellow to orange.If the filter paper is impregnated with a drop of acid solution (I N HCl) of methyl fluorone in alcohol, the sharpness of the reaction of antimony and molybdenum is appreciably increased, whilst the colouration due to germanium and tin do not interfere.By treating the spot with a few drops of H₂O₂ + HCl, the colouration due to molybdenum disappears and the reaction for antimony, which was selective, now becomes specific for this element.     

A simple and sensitive analytical method for the determination of antimony in environmental and biological samples.

The results of a study and application of leucocrystal violet for the determination of antimony in parts per million levels is described here. The proposed method is based on the reaction of antimony(III) with acidified potassium iodate to liberate iodine. The liberated iodine selectively oxidizes leucocrystal violet to crystal violet dye. The formed dye shows maximum absorbance at 590 nm. The color system obeys Beer's law in the concentration range from 0.4 - 3.6 microg antimony per 25 ml of final solution. The molar absorptivity and Sandell's sensitivity were found to be 7.32 x 10(5) l mol(-1) cm(-1) and 0.0016 microg cm(-2), respectively. All variables were studied in order to optimize the reaction. The proposed method is satisfactorily applicable for the analysis of antimony in various environmental and biological samples. The method is simple, highly sensitive, accurate and reliable.     

Selective separation and differential determination of antimony(III) and antimony(V) by solvent extraction with N-benzoyl-N-phenylhydroxylamine and graphite-furnace atomic-absorption spectrometry using a matrix-modification technique

If copper is used as a matrix modifier for the determination of antimony, the ashing temperature for antimony in aqueous solution and a BPHA-CHCl(3) extract can be raised to 1300 degrees and 1100 degrees , respectively. A selective procedure for separating antimony(III) from antimony(V) by extraction with BPHA in chloroform is described, along with the conditions for preserving trace antimony in water samples. The recommended method has been applied satisfactorily to the determination of antimony(III) and antimony(V) in various types of water at sub-ng/ml levels.     

Facile preparation of Sb and oxide-coated Sb nanoparticles via cathodic dispersion of bulk Sb in different media

We report here a facile electrochemical method on the preparation of antimony nanoparticles (NPs) by dispersing a bulk antimony electrode under highly cathodic polarization in different media at room temperature, requiring neither precursor ions nor organic capping agents. The dispersion of bulk antimony in a tetrabutyl ammonium bromide (TBAB) acetonitrile solution involved the formation and oxidation of an unstable Zintl compound of antimony, and the as-prepared Sb NPs were readily transferred into Sb–Sb₂O₃ core–shell NPs during the post treatment and characterization because of the surface oxidation of Sb NPs by oxygen in the air. In contrast, Sb NPs prepared by dispersing the bulk antimony cathode in a blank aqueous NaOH solution were oxygen-resistant in the air because the strongly adsorbed hydroxide ions from the solution could stabilize the Sb NPs. The incorporation of sodium, the formation/oxidation of polyanions of antimony (Zintl ions), and the formation/decomposition of unstable antimony hydrides may all take effect for the cathodic dispersion of bulk antimony electrodes in the NaOH solution. Transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy were used to characterize these NPs.