Determination of platinum and palladium in road dust after their separation on immobilized fungus by electrothermal atomic absorption spectrometry

A flow solid phase extraction procedure based on biosorption of Pt(IV) and Pd(II) on Aspergillus sp. immobilized on cellulose resin Cellex-T was proposed for the separation and preconcentration of Pt and Pd before their determination by electrothermal atomic absorption spectrometry (ETAAS). The analytical conditions including sample pH, eluent type, flow rates of sample and eluent solutions were examined. The analytes were selectively retained on the biosorbent in acidic medium (pH 1) and subsequently eluted from the column with 1 mL of thiourea solution (0.25 mol L^− 1 thiourea in 0.3 mol L^− 1 HCl). The reproducibility of the procedure was below 5%. The limit of detection of the method was 0.020 ng mL^− 1 for Pt and 0.012 ng mL^− 1 for Pd. The method validation was performed by analysis of certified reference materials BCR-723 (tunnel dust) and SARM-76 (platinum ore). The developed separation procedure was applied to the determination of Pt and Pd in road dust samples by ETAAS.The applied biosorbent is characterized by high sorption capacity: 0.47 mg g^− 1 for Pt and 1.24 mg g^− 1 for Pd.     

Voltammetric methods for speciation analysis of trace metals in natural waters

Trace metals play an important role in the regulation of primary productivity and phytoplankton community composition. Metal species directly affects the biogeochemical cycling processes, transport, fate, bioavailability and toxicity of trace metals. Therefore, developing powerful methods for metal speciation analysis is very useful for research in a range of fields, including chemical and environmental analysis. Voltammetric methods, such as anodic stripping voltammetry (ASV) and competing ligand exchange-adsorptive cathodic stripping voltammetry (CLE-AdCSV), have been widely adopted for speciation analysis of metals in different natural aquatic systems. This paper provides an overview of the theory of voltammetric methods and their application for metal speciation analysis in natural waters, with a particular focus on current voltammetric methods for the discrimination of labile/inert fractions, redox species and covalently bound species. Speciation analysis of typical trace metals in natural waters including Fe, Cu, Zn, Cd, and Pb are presented and discussed in detail, with future perspectives for metal speciation analysis using voltammetric methods also discussed. This review can elaborate the particular knowledge of theory, merits, application and future challenge of voltammetric methods for speciation analysis of trace metals in natural waters.     

Trace metal speciation in coastal and off-shore sediments from Ross Sea (Antarctica)

The information on total metal concentration in sediments is not sufficient to assess the metal behaviour in the environment, while speciation studies are more effective in estimating environmental impact of contaminated sediments. Concerning metal distribution in Antarctic marine sediments, several studies reported total or extractable (by means of a unique reagent) content, but only few publications dealt with metal speciation.This work presents the total content and speciation pattern of Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn in 12 cm sediment cores, sampled both in coastal and off-shore sites of the Ross Sea shelf area, within the framework of the Italian National Antarctic Programme (PNRA). The total content results of metals are comparable with the background values and the speciation highlights good environmental quality of the studied areas. Only Cd and Pb, in fact, are present in significative amount in non residual phases (acid-extractable and reducible, respectively).     

Trace metal speciation measurements in waters by the liquid binding phase DGT device

The speciation measurements of trace metals by the diffusive gradients in thin-films technique (DGT) using a poly(4-styrenesulfonate) (PSS) aqueous solution as a binding phase and a cellulose dialysis membrane (CDM) as a diffusive layer, CDM-PSS DGT, were investigated and showed good agreement with computer modelling calculations. The diffusion coefficients of ethylenediaminetetraacetic acid (EDTA) complexes with Cd²⁺ and Cu²⁺ were measured and compared with those of the inorganic metal ions. CDM-PSS DGT device was tested for speciation measurement in sample solutions containing EDTA, tannic acid (TA), glucose (GL), dodecylbenzenesulfonic acid (DBS) and humic acid (HA) as complexing ligands forming organic complexes with varying stability constants. Lower percentages of DGT labile copper concentrations over total filterable copper concentrations obtained from the deployments in freshwater sites indicated that copper complexes with organic matter were basically not measured by the devices.     

Determination of inorganic arsenic species in natural waters—Benefits of separation and preconcentration on ion exchange and hybrid resins

A simple method for the separation and determination of inorganic arsenic (iAs) species in natural and drinking water was developed. Procedures for sample preparation, separation of As(III) and As(V) species and preconcentration of the total iAs on fixed bed columns were defined. Two resins, a strong base anion exchange (SBAE) resin and a hybrid (HY) resin were utilized. The inductively-coupled plasma-mass spectrometry method was applied as the analytical method for the determination of the arsenic concentration in water. The governing factors for the ion exchange/sorption of arsenic on resins in a batch and a fixed bed flow system were analyzed and compared. Acidity of the water, which plays an important role in the control of the ionic or molecular forms of arsenic species, was beneficial for the separation; by adjusting the pH values to less than 8.00, the SBAE resin separated As(V) from As(III) in water by retaining As(V) and allowing As(III) to pass through. The sorption activity of the hydrated iron oxide particles integrated into the HY resin was beneficial for bonding of all iAs species over a wide range of pH values from 5.00 to 11.00. The resin capacities were calculated according to the breakthrough points in a fixed bed flow system. At pH 7.50, the SBAE resin bound more than 370 μg g⁻¹ of As(V) while the HY resin bound more than 4150 μg g⁻¹ of As(III) and more than 3500 μg g⁻¹ of As(V). The high capacities and selectivity of the resins were considered as advantageous for the development and application of two procedures, one for the separation and determination of As(III) (with SBAE) and the other for the preconcentration and determination of the total arsenic (with HY resin). Methods were established through basic analytical procedures (with external standards, certified reference materials and the standard addition method) and by the parallel analysis of some samples using the atomic absorption spectrometry-hydride generation technique. The analytical properties of both procedures were similar: the limit of detection was 0.24 μg L⁻¹, the limit of quantification was 0.80 μg L⁻¹ and the relative standard deviations for samples with a content of arsenic from 10.00 to 300.0 μg L⁻¹ ranged from 1.1 to 5.8%. The interference effects of anions commonly found in water and some organic species which can be present in water were found to be negligible. Verification with certified reference materials proved that the experimental concentrations found for model solutions and real samples were in agreement with the certified values.     

Multielemental speciation of trace elements in estuarine waters with automated on-site UV photolysis and resin chelation coupled to inductively coupled plasma mass spectrometry

An integrated approach for the accurate determination of total, labile and organically bound dissolved trace metal concentration in the field is presented. Two independent automated platforms consisting of an ultraviolet (UV) on-line unit and a chelation/preconcentration/matrix elimination module were specifically developed to process samples on-site to avoid sample storage prior to inductively coupled plasma mass spectrometry (ICP-MS) analysis. The speciation scheme allowed simultaneous discrimination between labile and organic stable dissolved species of seven trace elements including Cd, Cu, Mn, Ni, Pb, U and Zn, using only 5 ml of sample with detection limits ranging between 0.6 ng l⁻¹ for Cd and 33 ng l⁻¹ for Ni. The influence of UV photolysis on organic matter and its associated metal complexes was investigated by fluorescence spectroscopy and validated against natural samples spiked with humic substances standards. The chelation/preconcentration/matrix elimination procedure was validated against an artificial seawater spiked sample and two certified reference materials (SLRS-4 and CASS-4) to ensure homogenous performance across freshwater, estuarine and seawater samples. The speciation scheme was applied to two natural freshwater and seawater samples collected in the Adour Estuary (Southwestern, France) and processed in the field. The results indicated that the organic complexation levels were high and unchanged for Cu in both samples, whereas different signatures were observed for Cd, Mn, Ni, Pb, U and Zn, suggesting organic ligands of different origin and/or their transformation/alteration along estuarine water mixing.     

Preconcentration of selenium compounds on a porous graphitic carbon column in view of HPLC-ICP-AES speciation analysis

The retention of organic selenium compounds on a porous graphitic carbon stationary phase was investigated. Different acids were studied as mobile phases to elute selenocystamine, selenoethionine, selenomethionine and selenocystine. Detection was achieved using inductively coupled plasma-atomic emission spectrometry to provide selenium-specific and sensitive detection. The separation of the four species was carried out using methanoic acid. An important on-column preconcentration was obtained when solutes were injected in nitric acid or trifluoroacetic acid (TFA) media. The large injection volume employed (2,500 µL) allowed us to reach low relative detection limits (2–6 µg/L). The method, employing TFA as injection solvent and methanoic acid as the eluent was found to be robust with respect to different matrices spiked with selenocompounds.     

Speciation of butyltin compounds in marine sediments by preconcentration on C60 and gas chromatography-mass spectrometry

A new method for the speciation of butyltin compounds by solid phase extraction and direct injection using gas chromatography-mass spectrometry (GC/MS) is described. The compounds were complexed with sodium diethyldithiocarbamate and retained on a C60 sorbent column. The neutral chelates of butyltin compounds were eluted with ethyl acetate containing NaBPr4 as derivatising reagent. The main analytical figures of merit of the proposed method for 10 ml of sample are: linear range 0.2-35 ng/g expressed as Sn; limits of detection, 0.07, 0.09 and 0.10 ng/g as Sn for monobutyltin, dibutyltin and tributyltin, respectively. No interferences from metal ions such as Zn2+, Fe3+, Sb3t, Pb2+, Ni2+ and Mn2+ were observed in the determination of organotin compounds. The validation of method was performed out by the analysis of a standard reference sediment (CRM 462). The method was also applied to the determination of butyltin compounds in marine sediment samples.     

Simultaneous determination of traces of iron, cobalt, nickel, copper, mercury and lead in water by energy-dispersive x-ray fluorescence spectrometry after preconcentration as their piperazino-1,4-bis(dithiocarbamate) complexes

A bidentate chelating agent has been proposed to preconcentrate seven metal ions dissolved in an aqueous sample for their simultaneous determination using energy-dispersive x-ray fluorescence spectrometry. The metal ions are precipitated as their polymeric piperazino-1,4-bis(dithiocarbamate) chelates, which are then collected by vacuum filtration on a Millipore membrane filter for direct examination by x-ray fluorescence analysis. Iron, cobalt, nickel, copper and zinc are determined by means of their K x-rays and mercury and lead by means of their L x-rays. A detection limit in the μg1⁻¹ range can be achieved for all metals tested in 250-ml water samples with a counting time of 600 s. Effective precipitation of all metals occurs at pH 6–7. The recoveries of eight analyses of the metals in a multielement standard using the proposed method ranged from 97 to 105% and the precision ranged from 2.3 to 3.1%. High concentrations of calcium and magnesium do not interfere with the method. The method is simple, sensitive and accurate, and has been used for the simultaneous determination of the seven metals under study in environmental samples and synthetic mixtures.     

Speciation and preconcentration of inorganic antimony in waters by Duolite GT-73 microcolumn and determination by segmented flow injection-hydride generation atomic absorption spectrometry (SFI-HGAAS)

A selective matrix removal/separation/enrichment method, utilizing a microcolumn of a chelating resin with SH functional groups (Duolite GT-73), was proposed for the determination of Sb(III) in waters by segmented flow injection-hydride generation atomic absorption spectrometry (SFI-HGAAS). The resin was selective to Sb(III) at almost all pH and acidity values employed, whereas Sb(V) was not retained at all and could be determined after a pre-reduction step with l-cysteine. Spike recoveries were tested at various concentration levels in different water types and were found to vary between 85 and 118%. Accuracy of the proposed methodology was checked by analyzing a standard reference material and a good correlation was found between the determined (13.3 ± 1.1 μg l⁻¹) and the certified value (13.79 ± 0.42 μg l⁻¹). The method was applied to several bottled drinking water samples for antimony determination with and without preconcentration and none of the samples were found to contain antimony above the permissible level (5 μg l⁻¹). The characteristic concentration (the concentration of the analyte corresponding to an absorbance of 0.0044) was 0.55 μg l⁻¹ and the 3 s limit of detection (LOD) based on five times preconcentration was 0.06 μg l⁻¹. The applicability of the microcolumn separation/preconcentration/matrix removal method for flow injection systems was also demonstrated.     

Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

Solid-phase extraction in the determination of gold, palladium, and platinum

A simple classification of various sorbents and solid-phase extraction procedures used for preconcentration of trace levels of Au, Pd, and Pt from different sample types is proposed in this review article. The large variety of available sorbents/procedures has been organized according to expected mechanisms of sorption process (complex formation; ion exchange; adsorption; ion-imprinted or molecularly imprinted polymers); according to the kind of monomeric units of the polymer matrix as well as on the basis of the kind of functional group responsible for main performance characteristics (selectivity, capacity) of the sorbent. Advantages of chemically modified sorbents, sulfur-containing sorbent extractants, and ion-imprinted polymers, together with rational pretreatment by means of microwave treatments, scaling down of enrichment, and quantification by means of flow and flow injection approaches are given. Preferred instrumental techniques for quantification of ppb levels of Au, Pd, and Pt in prepared concentrates/column eluates are multielement instrumental techniques: inductively coupled plasma optical emission spectrometry (ICP-OES), and inductively coupled plasma mass spectrometry (ICPMS). Excellent limits of detection at picogram levels of these analytes are provided by electrothermal atomic absorption spectrometry (ETAAS), generally in single-element mode and the neutron activation analysis (NAA), while X-ray fluorescence spectrometry and flame AAS are rarely applied because of lack of sensitivity at sub-ppm levels of Au, Pd, and Pt. Some problems of atomic spectrometric quantification techniques and their representative limits of detection are given. Recent applications to geological, industrial, pharmaceutical, biological, and other materials are tabulated. References have been selected mostly from the period 1995 to 2010.     

Speciation of mercury compounds in waste water by microcolumn liquid chromatography using a preconcentration column with cold-vapour atomic absorption spectrometric detection

A microcolumn liquid chromatographic method with cold-vapour atomic absorption spectrometric detection was developed for the speciation of mercury compounds in waste water. The sample solution containing mercury at the 4-ng level was injected onto a preconcentration column (27 mn × 0.51 mm i.d.) packed with Develosil-ODS (30 μm) and eluted with cysteine-acetic acid through a separation column (125 mm × 0.5 mm i.d.) packed with STR-ODS-H (5 μm). After oxidation, tin(II) chloride in sodium hydroxide solution was used to reduce mercury compounds to mercury. The generated mercury vapour was swept from a gas-liquid separator by argon into the detector cell and monitored at 253.7 nm. Mercury(II) chloride, methylmercury chloride and ethylmercury chloride, were well resolved and the determination was completed in less than 16 min. The method was successfully applied to the speciation of mercury compounds in waste water.     

Epigenetics: an important challenge for ICP-MS in metallomics studies

Trace metal analysis has been long regarded as one of the principle tasks in areas of chemical analysis. At the early stage of instrumental development, total concentration was assessed in a variety of samples, yielding results, among others, for environmental, biological, and clinical samples. With the power of newer analytical techniques, such as inductively coupled plasma mass spectrometry (ICP-MS), accurate quantitative results can now be obtained at ultra-trace levels not only for metals, but also for metalloids and several non-metals. Even though the importance of trace elements in many biological processes is widely accepted, the elucidation of their biological pathways, understanding specific biological functions, or possible toxicological aspects is still a challenge and a driving force to further develop analytical methodology. Over the past decades, the scientific interest has moved from total element determination to include speciation analysis, which provides quantitative information of one or more individual element species in a sample. More recently, metallomics has been introduced as a more expanded concept, in which the global role of all metal/metalloids in a given system is considered. Owing to the multi-elemental focus of metallomics research, the use of ICP-MS becomes indispensable. Furthermore, considering the biological role of metals/metalloids and the use of elements as internal or external molecular tags, epigenetics should be considered as an important emerging application for metallomics studies and approaches. Among a variety of epigenetic factors, essential nutrients, but also environmental toxins, have been shown to affect DNA methylation, modification of histone proteins, and RNA interference, all of them being implicated in cancer, cardiovascular disease, and several inherited conditions. Recent studies suggest that epigenetics may be a critical pathway by which metals produce health effects. In this Trends article, the basic epigenetic concepts are introduced, followed by the early applications of ICP-MS classified as: (i) detection of ³¹P as a natural element tag for DNA, (ii) analysis of DNA adducts with metal-based drugs, (iii) element species as epigenetic factors.     

Biosorption of heavy metals on Aspergillus fumigatus immobilized Diaion HP-2MG resin for their atomic absorption spectrometric determinations

A solid phase extraction procedure based on biosorption of copper(II), lead(II), zinc(II), iron(III), nickel(II) and cobalt(II) ions on Aspergillus fumigatus immobilized Diaion HP-2MG has been investigated. The analytical conditions including amounts of A. fumigatus, eluent type, flow rates of sample and eluent solutions were examined. Good recoveries were obtained to the spiked natural waters. The influences of the concomitant ions on the retentions of the analytes were also examined. The detection limits (3sigma, N = 11) were 0.30 μg l⁻¹ for copper, 0.32 μg l⁻¹ for iron, 0.41 μg l⁻¹ for zinc, 0.52 μg l⁻¹ for lead, 0.59 μg l⁻¹ for nickel and 0.72 μg l⁻¹ for cobalt. The relative standard deviations of the procedure were below 7%. The validation of the presented procedure is performed by the analysis of three standard reference materials (NRCC-SLRS 4 Riverine Water, SRM 1515 Apple leaves and GBW 07605 Tea). The procedure was successfully applied for the determination of analyte ions in natural waters microwave digested samples including street dust, tomato paste, black tea, etc.     

On-line coupling of flow injection displacement sorption preconcentration to high-performance liquid chromatography for speciation analysis of mercury in seafood

A simple and cost-effective method for speciation analysis of trace mercury in seafood was developed by on-line coupling flow injection microcolumn displacement sorption preconcentration to high-performance liquid chromatography (HPLC) with UV detection. The methodology involved the presorption of the Cu-PDC (pyrrolidine dithiocarbamate) chelate onto a microcolumn packed with a cigarette filter sorbent, simultaneous preconcentration of Hg(II), methylmercury (MeHg), ethylmercury (EtHg), and phenylmercury (PhHg) onto the microcolumn through a displacement reaction with the presorbed Cu-PDC, and their subsequent elution from the microcolumn for on-line HPLC separation. Interferences from heavy metal ions with lower stability of their PDC chelates relative to Cu-PDC were minimized without the need of any masking agents. With the consumption of 4.0 ml of sample solution, the enrichment factors were about 80. The detection limits were 10-25 ng g(-1) (as Hg) in fresh tissue. Precision (R.S.D. (%), n = 5) ranged from 2 to 3% at the 500 microg l(-1) (as Hg) level. The developed technique was validated by analyzing a certified reference material (DORM-2, dogfish-muscle), and was shown to be useful for mercury speciation in real seafood samples.     

Three-way principal component analysis of chemical data from Lake Como watershed

A large data set obtained by a one-year monthly determination of ions (F⁻, Cl⁻, Br⁻, NO₃⁻, NO₂⁻, PO₄³⁻, SO₄²⁻, Na⁺, K⁺, Ca²⁺, Mg²⁺, NH₄⁺) and trace metals of environmental concern (Ni, Co, Mn, Fe) from the tributaries of Lake Como (Lombardy, Northern Italy) was treated by three-way Principal Component Analysis. The results showed that the chemical features of the investigated rivers are mainly related to the lithology of the watershed. Some cases of contamination were evidenced and rationalized on the basis of anthropic pollution or on the basis of the geochemical features of the territory. The method here proposed allows an easy and quick interpretation of the chemical data by means of graphical devices. The information extracted by the three-way models would be very useful to regional agencies in developing a strategy to manage water resources in the whole basin of Lake Como.     

Geochemical variability of copper and iron in Oman Margin sediments

An analysis of the geochemical distribution of selected trace metals among various geochemical phases of the sediments in the Oman Margin was carried out using a sequential extraction technique. The present study showed that most Cu in abyssal sediment is associated with only oxidisable mainly organic and sulphide bound metals with insignificant bound to exchangeable, carbonates, easily/moderately reducible fraction. The preservation of Cu in the sediments indicates the importance of primary production and upwelling in the overlying waters and an organic flux in the sedimentary deposition of open-ocean environments. The early diagenetically formed oxidisable mainly organic and sulphide fraction are not degraded and results in a pronounced association of Cu with organic fraction in the sediments of the Oman continental margin. The strong correlation between Cu, TOC and Fe oxides associated with the oxidisable fraction in one of the core indicates that it is likely to be the presence of sulphides.     

Determination of inorganic selenium species in water and garlic samples with on-line ionic liquid dispersive microextraction and electrothermal atomic absorption spectrometry

A non-chromatographic separation and preconcentration method for Se species determination based on the use of an on-line ionic liquid (IL) dispersive microextraction system coupled to electrothermal atomic absorption spectrometry (ETAAS) is proposed. Retention and separation of the IL phase was achieved with a Florisil^®-packed microcolumn after dispersive liquid-liquid microextraction (DLLME) with tetradecyl(trihexyl)phosphonium chloride IL (CYPHOS^® IL 101). Selenite [Se(IV)] species was selectively separated by forming Se-ammonium pyrrolidine dithiocarbamate (Se-APDC) complex followed by extraction with CYPHOS^® IL 101. The methodology was highly selective towards Se(IV), while selenate [Se(VI)] was reduced and then indirectly determined. Several factors influencing the efficiency of the preconcentration technique, such as APDC concentration, sample volume, extractant phase volume, type of eluent, elution flow rate, etc., have been investigated in detail. The limit of detection (LOD) was 15 ng L⁻¹ and the relative standard deviation (RSD) for 10 replicates at 0.5 μg L⁻¹ Se concentration was 5.1%, calculated with peak heights. The calibration graph was linear and a correlation coefficient of 0.9993 was achieved. The method was successfully employed for Se speciation studies in garlic extracts and water samples.