Application of Protonic Acid-Doped Silica Gels to Electric Double-Layer Capacitors

Silica gels doped with several protonic acids such as HClO₄, H₂SO₄ and H₃PO₄ have been prepared by the sol-gel method and totally solid electric double-layer capacitors have been successfully fabricated using the highly proton-conductive silica gels as an electrolyte and activated carbon powder (ACP) hybridized with the silica gels as a polarizable electrode. It was found that the addition of HClO₄, which had the highest value of acid dissociation constant among these three acids, most effectively increased the proton conductivity of the resultant acid-doped silica gels. Tablets of the HClO₄-doped silica gels exhibited conductivities as high as 10^–5–10^–2 S cm^–1 at room temperature in dry N₂ atmosphere. One of the capacitors fabricated using the protonic acid-doped silica gels had a capacitance of 44 F/(gram of total ACP in the capacitor), which was comparable to those of conventional capacitors using liquid electrolytes.     

Variations of activity coefficients in concentrated electrolyte solutions at constant lonic strength

Measurements of different types on various (trace) electrolytes in HClO₄–Na(Li)ClO₄ solutions at several (constant) values of the ionic strength have been used to determine the variation of their activity coefficients with changing amount of perchloric acid in the solution. These variations (with respect to the hydrogen ion) differ considerably among different cations and anions. The results for the alkali metal ions and the anions are interpreted in the light of the recent work of Pitzer on short-range ionic interactions. The results for the cations with outerd-electrons and the alkaline earth metal ions are interpreted in terms of ion-solvent interactions. It is concluded that the use of HClO₄–NaClO₄ solutions of high ionic strength (rather than the use of HClO₄–LiClO₄ solutions) is advisable in studies where the variation in activity coefficients must be accounted for. Finally, it is shown that the usual interpretation of the influence of the salt medium in studies of complex equilibria and reaction kinetics is sometimes questionable.     

Die kinetische polarographische Stufe des Urans in Gegenwart von Chlorat-Ionen

An increase of the 2nd polarographic uranium(VI) wave has been observed in the presence of chlorate ions in HClO₄–NaClO₄, or HClO₄–NaClO₄–NaCl supporting electrolyte, resp. The polarographic measurements at different temperatures and at various perchloric acid concentrations show that this increase is due to a kinetic U(III)-U(IV) current. The activation parameters of the U(III)-U(IV) oxidation reaction with ClO₃ ^– have been calculated usingKautecky's method.The approximately 5fold increase of the 2nd polarographic wave allows the determination of small amounts of uranium (10^–5–10^–6 mole/l).

---

---

Mit 2 Abbildungen     

In situ Near-Infrared Spectroelectrochemical Investigation of Redox States of Polyaniline during Growth and Doping

In situ near-infrared (NIR) spectroelectrochemical studies during growth and dedoping/redoping of polyaniline (PANI) in the range between 1200 to 3000 nm are carried out in 1 M aqueous solutions of HCl, H₂SO₄, and HClO₄ acids andp-toluene sulfonic acid (PTSA). The results show three characteristic absorption bands around 1440, 1900, and 2500 nm. The band at 2500 nm is characteristic of mobile charge carriers. The PANI prepared in HClO₄ keeps memory of the size of the doping anion (ClO₄ ^–) and can be redoped only with the same or smaller anions (Cl^– and SO₄ ^2– or HSO₄ ^–) while it cannot be redoped to any significant extent by a larger anion (PTSA^–).     

Coated wire chromium(III) ion-selective electrode based on azamacrocycles

Tetraazacyclotetradecane, tetratosyltetraaza 12C4, and tritosyltriaza 9C3 have been explored as electroactive materials for preparing coated wire ion-selective electrodes (CWISEs) for Cr(III) ions. The best performance was observed for the membrane comprising electroactive material (tetratosyltetraaza 12C4), plasticizer (dibutyl phthalate), and poly(vinyl chloride) in the optimum ratio 5:60:35 (w/w). Linear Nernstian response for this electrode was obtained over the total Cr(III) concentration range of 1×10^–1 to 1×10^–7 M in 0.05 M NH₄NO₃ medium, with a slope of 20±1 mV per decade change. The working pH range of the electrode was 1.8–5.5. Selectivity coefficients of some mono, divalent, and trivalent metal ions were determined. Analyses of electroplating bath solutions, chromating, and effluent samples have been carried out using this CWISE and the results are found to be comparable with those obtained by using conventional methods or by AAS.     

Complexometric determination of thorium in ThO2−PuO2

A method based on the complexometric titration of thorium using ethylene diaminetetra-acetic acid (EDTA) as complexant has been developed for the determination of thorium in thorium-plutonium solution without resorting to prior separation of plutonium. Plutonium in the form of Pu(VI) does not affect the thorium determination when present up to 10% in thorium—plutonium solution. For oxidation of plutonium to Pu(VI), HClO₄ or AgO was used. HClO₄ is preferred. The thorium values obtained without prior separation of plutonium are compared with those obtained after separating plutonium by anion exchange technique. A precision of ±0.5% has been obtained for 5–10 mg of thorium in the aliquot.     

Thermal diffusion of tetrabutylammonium salts in aqueous solution at 25°C

A conductimetric technique is used to measure the Soret coefficients of dilute aqueous solutions of tetra-n-butylammonium (NBu₄) chloride, bromide, iodide and thiocyanate at 25°C and salt molalities from 0.0005 to 0.02 mol-kg^–1. Entropies of transport calculated from the Soret coefficients pass through minima near 0.001 mol-kg^–1 for NBu₄I and NBu₄SCN, and near 0.003 mol-kg^–1 for NBu₄Cl and NBu₄Br. The results for NBu₄Cl are in good agreement with those obtained by Lin et al. from thermocell measurements.     

Solvent effects on acid-base behavior: Five uncharged acids in water-sulfolane solvents

An electrometric titration method utilizing glass electrodes and silver-silver bromide electrodes in a cell without liquid junction has been applied to a determination of the dissociation constants of five uncharged weak acids (HA) in four mixtures of water and sulfolane (tetramethylene sulfone) at 25°C. The acids studied were monochloroacetic, formic, benzoic, and acetic acids andp-nitrophenol, and the mole fractions (x ₂) of sulfolane in the mixed solvents were 0.2, 0.4, 0.6, and 0.8. All measurements were made at a constant ionic strength of 0.02 mole-kg^–1 in a solution containing NaBr at a molality of 0.01 mole-kg^–1. The cell was standardized by measurements of HClO₄ at molalities from 0.002 to 0.01 mole-kg^–1 and, in subsequent measurements, a solution of NaA was titrated with HClO₄. To obtain the thermodynamic pK, an activity correction derived from the Debye-Hückel theory was applied. The pK of all five acids was found to vary linearly withx ₂ in the range 0 to 0.8. By comparison of data for acetic acid in water-methanol, water-dioxane, and water-sulfolane solvents, it was shown that the results are consistent with the known properties of sulfolane (low acidity, basicity, and solvating power), but the linear variation of pK with solvent composition remains unexplained.On leave 1973–1975 from the University of Gdansk, Poland.     

Extraction of Hg/II/ with dibutylester of N-/4-antipyryl/-amidophosphoric acid from iodide solutions

A new extraction reagent-dibutylester of N-/4-antipyryl/-amidophosphoric acid/DBAAP/—has been developed and used for the extraction of divalent mercury into chloroform from mixture of sodium iodide and perchloric acid. It was found that the composition of the species extracted into the organic phase depends on the acidity of the aqueous phase. The solvate HgI₂. DBAAP is extracted at low HClO₄ concentrations, an ion-pair, /DBAAPH/⁺.HgI ₃ ^– , is formed and extracted at high concentrations of perchloric acid.     

Determination of Some Liposoluble Antioxidants by Coulometry and Voltammetry

It is found that the interaction of retinol, ergocalciferol, and cholecalciferol with electrochemically generated bromine proceeds rapidly and quantitatively. The stoichiometric coefficients of the reaction are 1 : 2, 1 : 7, and 1 : 3, respectively. A coulometric determination of microgram amounts of individual liposoluble antioxidants in model solutions was performed with RSD = 1–5%. The voltammetric response of retinol and -tocopherol was studied at a stationary platinum microelectrode in 0.1 M HClO₄ and 0.1 M CH₃COONa in acetonitrile. The quantification limit for -tocopherol is 2.7 × 10^–4 M in 0.1 M HClO₄, and the quantification limits for retinol are 4.1 × 10^–5 M in 0.1 M HClO₄ and 2.1 × 10^–5 M in 0.1 M CH₃COONa. A procedure for the coulometric determination of total free liposoluble antioxidants in human blood serum is proposed.     

Influence of digestion methods on the determination of total Al in food samples by ICP-ES

Summary To determine total Al in a variety of food and total diet samples using ICP-ES, HF pre-treatment, prior to wet digestion (HNO₃/HClO₄) seems to be necessary. Compared with results obtained after HF pre-treatment, the determination of Al using pressure microwave digestion with HNO₃ or HNO₃/HClO₄ digestion recovered only between 25–50% Al for dried spinach and flour and 40–75% for total diet samples, respectively. In most cases the addition of 0.25 ml HF (40%) per gram dry mass resulted in maximum Al yield. The results are in acceptable agreement with those obtained by neutron activation analysis (NAA).     

Isopiestic determination of the osmotic and activity coefficients of aqueous Lu2(SO4)3 at 25°C

Osmotic coefficients have been measured for aqueous Lu₂(SO₄)₃ solutions from 0.12402 to 0.89631 mol-kg^–1 at 25°C by use of the isopiestic method; these measurements extend into the supersaturated molality region. Since there was a lack of activity data for Lu₂(SO₄)₃ solutions at lower molalities, they were approximated by equating them to results for La₂(SO₄)₃ from freezing temperature depression measurements. The combined osmotic coefficients were then used to derive mean molal activity coefficients for Lu₂(SO₄)₃ solutions. The osmotic coefficients decrease to 0.307 as their minimum value and the mean molal activity coefficients decrease to 0.0069. When these activities were combined with our previously reported solubility of 0.6260±0.0017 mol-kg^–1 for Lu₂(SO₄)₃·8H₂O, a thermodynamic solubility product of 2.3×10^–10 was obtained. This value yields the Gibbs energy of formation G _f ^° (Lu₂(SO₄)₃·8H₂O, cr)=–5518.9±16.4 kJ-mol^–1.     

Determination of oxytetracycline in urine and human serum by differential pulse polarography

Summary A differential pulse polarographic method for the determination of oxytetracycline in urine and human serum in acid media (HClO₄ of pH 2) is proposed. The effects of the amount of sample taken and the concentration of HClO₄ present were investigated. The detection limit was 5.5×10^–6 mol/l. The standard deviation of the determination of 5.5×10^–5 mol/l of oxytetracycline in 2 ml of urine was 1.7×10^–6 mol/l and that of the determination of 5.5×10^–5 mol/l of oxytetracycline in 2 ml of human serum was 1.9×10^–6 mol/l.

---

Bestimmung von Oxytetracyclin in Urin und Humanserum durch Differential-Pulspolarography

     

New effective and selective extractants for separation and determination of silver

Summary Isopropyl-N-alkylthiocarbamates have been studied as extractants for preconcentration of silver trace amounts and for separation of silver macroquantities. It has been shown that the 0.05M reagents in chloroform extract trace amounts of silver with high distribution coefficients from HNO₃, H₂SO₄, HClO₄ and HCl solutions in wide range of their concentrations. The highest selectivity is obtained when HNO₃, H₂SO₄ or HClO₄ solutions are used. Besides silver only mercury and palladium are extracted. When HC1 solutions are used, gold is also transferred into organic phase. Isopropyl-N-alkylthiocarbamates are effective for extraction of silver from its concentrated (up to 1M) solutions, particularly from HNO₃ solutions: more than 99.9% of silver is extracted even at 2-fold reagent excess. Some characteristics of reagents themselfes have been investigated, such as dissociation, protonation, distribution between organic and aqueous phases and association in organic solvents. The thion forms are found to be predominant. Silver is extracted as coordination solvated compounds Ag(HL) _n X, where X=Cl, Br, J, NO₃. Sulfur serves as a donor atom for their formation.The procedures for silver determination in geological samples by flame atomic absorption (3×10^–7%) and atomic emission (1×10^–7%) have been developed. The procedures for atomic emission determination of 23 trace elements (5×10^–8–1×10^–5%) and for electrothermal atomic absorption determination of 17 trace elements (4×10^–9–8×10^–6%) in high purity silver have also been developed.

---

Neue wirksame und selektive Extraktionsmittel für die Trennung und Bestimmung von Silber

Zusammenfassung Isopropyl-N-alkylthiocarbamate wurden als Extraktionsmittel für die Anreicherung von Silberspuren und für die Abtrennung von Makromengen Silber geprüft. Es ergab sich, daß solche 0,05M, in Chloroform gelöste Reagenzien Silberspuren mit hohen Verteilungskoeffizienten aus HNO₃, H₂SO₄, HClO₄ und HCl extrahieren. Die beste Selektivität wurde mit HNO₃, H₂SO₄ oder HClO₄erzielt. Neben Silber werden nur Quecksilber und Palladium extrahiert. Verwendet man HCl, so geht auch Gold in die organische Phase. Isopropyl-N-alkylthiocarbamate eignen sich für die Extraktion von Silber aus konzentrierten (bis zu 1M) Lösungen, besonders aus HNO₃: mehr als 99,9% Silber werden mit zweifachem Reagensüberschuß extrahiert. Einige charakteristische Eigenschaften der in Rede stehenden Reagenzien wurden untersucht: z. B. die Dissoziation, die Protonation, die Verteilung zwischen organischer und wäßriger Phase und die Assoziation in organischen Lösungsmitteln. Hauptsächlich liegen diese Reagenzien in Thionform vor. Silber wird als Ag(HL) _n X extrahiert, worin X für Cl, Br, J oder NO₃ steht. Schwefel fungiert als Donatoratom für deren Bildung.Verfahren zur Silberbestimmung in geologischen Proben mit Hilfe der Flammen-Atomabsorption (3×10^–7%) bzw. der atomaren Emission (l×10^–7) wurden ausgearbeitet. Außerdem wurden auch Verfahren zur Bestimmung von 23 Spurenelementen mittels atomarer Emission (5×10^–8 bis 1×10^–5%) und von 17 Spurenelementen mittels elektrothermaler Atomabsorption (4×10^–9 bis 8×10^–6%) in hochgereinigtem Silber entwickelt.

---

---

The paper has been presented at the Fifth European Conference on Analytical Chemistry (Euroanalysis V), Cracow, August 26–31, 1984.     

Extraktion von Perchlorsäure mit Tributylphosphat und Tributylphosphinoxid

Zusammenfassung Es wurde die Zusammensetzung der extrahierbaren Verbindungen sowie der Extraktionsmechanismus in den Systemen HClO₄–TBP und HClO₄–TBPO untersucht. Die Extraktion von HClO₄ mitTBP verläuft unter Teilnahme von Wasser—nach dem Hydronium-Mechanismus. Der extrahierbare Komplex hat eine veränderliche Zusammensetzung. Dabei beobachtet man einen bestimmten Zusammenhang zwischen der Hydratations-und der Solvatationszahl,m=h+2. Es wurde auch die Extraktions-Gleichgewichtskonstante berechnet. Die Extraktion von HClO₄ mitTBPO verläuft nach einem anderen Mechanismus, ohne Teilnahme von Wasser. Bei niedrigen Säurekonzentrationen bildet sich ein Monosolvat.

---

Extraction of perchloric acid with tributyl phosphate and tributylphosphine oxide

For the systems HClO₄–TBP and HClO₄–TBPO, the composition of the extractable compounds as well as the extraction mechanism have been investigated. The extraction of HClO₄ withTBP takes place with the participation of water according to the hydronium mechanism and the extractable complex has a variable composition. A definite relationship between the hydratation and the solvatation numbers,m=h+2, is observed. The equilibrium constant for the extraction has been calculated. The extraction of HClO₄ withTBPO, however, takes place according to a different mechanism and with no participation of water. At lower concentrations of the acid a mono-solvate is formed.

---

---

Mit 3 Abbildungen     

Kinetics and mechanism of oxidation of malonic acid by permanganate and manganese dioxide in acid perchlorate medium

Summary The kinetics of oxidation of malonic acid by both [MnO₄]^– and MnO₂ have been studied in an HClO₄ medium. The oxidation product of the organic acid was found to be glyoxylic acid. A reaction mechanism assuming complexation between MnO₂ and malonic acid is suggested. The rate is independent of [H⁺].     

Study of a bis-furaldehyde Schiff base copper(II) complex as carrier for preparation of highly selective thiocyanate electrodes

A new highly selective thiocyanate electrode based on N,N-bis-(furaldehyde)-1,2-phenylenediamine-dipicolyl copper(II) complex [Cu(II)-BFPD] as neutral carrier is described. The electrode has an anti-Hofmeister selectivity sequence: SCN^–>I^–>Sal^–>ClO₄ ^–>Br^–>NO₂ ^–>Cl^–>NO₃ ^–>SO₄ ^2–>SO₃ ^2–>H₂PO₄ ^– and a near-Nernstian potential linear range for thiocyanate from 1.0×10^–1 to 5.0×10^–6 mol L^–1 with a detection limit 2.0×10^–6 mol L^–1 and a slope of 57.5 mV decade^–1 in pH 5.0 of phosphate buffer solution at 20 °C. The response mechanism is discussed on the basis of results from A.C. impedance measurement and UV spectroscopy. The anti-Hofmeister behavior of the electrode results from a direct interaction between the central metal and the analyte ion and a steric effect associated with the structure of the carrier. The electrode has the advantages of simplicity, fast response, fair stability and reproducibility, and low detection limit. The selectivity of electrodes based on [Cu(II)-BFPD] exceeds that of classical anion-sensitive membrane electrodes based on ion exchangers such as lipophilic quaternary ammonium or phosphonium salts. Application of the electrode for determination of thiocyanate in waste water samples from a laboratory and a gas factory, and in human urine samples, is reported. The results obtained were fair agreement with the results obtained by HPLC.     

Comparison of recoveries of inogranic and organic incorporated75Se by four mineralization methods of biological material

The recovery of selenium⁷⁵Se added as selenite to human blood and to mixed food, and the recovery of biologically incorporated⁷⁵Se from different rat tissues were determined by using four mineralization methods. The recoveries of⁷⁵Se after dry ashing /HNO₃, Mg/NO₃/₂/ and after three wet digestion methods — 1. HNO₃, HClO₄ 2. HNO₃, HClO₄, H₂SO₄ 3. HNO₃, HClO₄, MgCl₂ were as follows: 50–106%, 96–99%, 92–99% and 97–100%, resp. Losses of⁷⁵Se in wet digestion /HNO₃, HClO₄/ were observed at the end of the procedure, when an excess of acids was evaporated. The addition of MgCl₂ to the digestion mixture prevented the escape of⁷⁵Se and thus permitted the total evaporation of the digest without any loss of selenium.     

Assay for uric acid level in rat striatum by a reagentless biosensor based on functionalized multi-wall carbon nanotubes with tin oxide

A novel reagentless amperometric uric acid biosensor based on functionalized multi-wall carbon nanotubes (MWCNTs) with tin oxide (SnO₂) nanoparticles has been developed. This was successfully applied to assay uric acid levels from an in vivo microdialysis sampling. Compared with unfunctionalized or traditional carboxylic acid (–COOH)-functionalized MWCNTs, the MWCNTs–SnO₂ electrode exhibited higher electrocatalytic oxidation to uric acid. Here, MWCNTs–SnO₂ may act as an efficient promoter, and the system exhibited a linear dependence on the uric acid concentration over the range from 1.0 × 10^–7 to 5.0 × 10^–4 mol L^–1. In addition, there was little ascorbic acid interference. The high sensitivity of the MWCNTs–SnO₂ modified enzyme electrode enabled the monitoring of trace levels of uric acid in dialysate samples in rat striatum.     

Thermodynamics of mixed electrolyte solutions. IX. Calculation of the osmotic and activity coefficients in a pseudoternary system (NaCl−nKCl)−MgCl2-H2O at 298.15°K

The equation of Reilly, Wood, and Robinson was used to predict the osmotic coefficient of a pseudoternary system (NaCl–nKCl)–MgCl₂–H₂O over a molal ionic strength range of 1.0 to 5.0 moles-kg^–1. The results are in close agreement with experimental data at most ionic strengths. The standard deviation in the osmotic coefficients over the entire concentration range lies within 0.0035. The predicted values of the mean activity coefficients are in good agreement with those obtained by the treatments of both Scatchard and Friedman. Mean activity coefficients for the other components were also predicted.