聚合物纳米微粒静电组装行为及其表征

使用2,2′-偶氮二异丁基脒二盐酸盐自由基引发剂,改变甲基丙烯酰氧乙基十六烷基二甲基溴化铵阳离子功能单体的量与苯乙烯进行乳液聚合获得不同粒径的阳离子乳胶粒,使用十二烷基硫酸钠为乳化剂和过硫酸钾为引发剂制备阴离子聚合物乳胶粒.采用基于静电相互作用的异凝聚法将以上2种带有相反电荷的乳胶粒组装,获得了表面粗糙程度不同的复合微粒.对异凝聚过程中复合液透光率和微粒大小及分布进行跟踪测试,并用透射电子显微镜表征了阳离子微粒、阴离子微粒以及复合微粒的形态和大小.结果表明,在一定范围内可以通过控制阴离子乳胶粒与阳离子乳胶粒的复合比例改变单个复合微粒表面阳离子小微粒的数目.     

微流体技术制备聚合物微粒的研究进展 Ⅰ.合成聚合物颗粒的方法及颗粒种类

综述了微流体技术合成聚合物颗粒的研究进展,包括基于液滴的合成、用流动刻蚀的技术合成及在设备中交替组装成复杂颗粒等合成组装技术,介绍了由此合成的一些不同形状和结构的颗粒及其性能,其中包括具备低密度和特殊表面性能的多孔性颗粒、可以通过加入功能物质制备出的性能优异的复合颗粒、拥有层状结构及多重性能的多功能颗粒、基础的球形颗粒以及通过微流体设备制备的非球形颗粒。     

Structural morphology developments in the interfacial phase of heterocoagulated composite particles: dynamic mechanical measurements

The dynamic mechanical properties of polymeric composites composed of poly (methyl methacrylate) continuous-phase and various inclusion types of heterocoagulated composite particles were investigated in order to relate them to the morphology of shell region of composite particles. Using the heterocoagulation process, large particles were encapsulated with various types of small particles: (1) conventional linear-type polymer particles; (2) crosslinked polymer particles; and (3) reactive polymer particles capable of forming crosslinked structure, whereby the interfacial properties of the composite become modified. These composite particles were subsequently annealed to form continuous shell regions and then mixed with matrix particles. It is shown that chain diffusion movement of the small particles having different chain characteristics influences the network formation at the interfacial shell region. The ability of maintaining interfacial domain structure depends on the degree of network formation.     

Generation and assembly of spheroid-like particles

This paper reports a straightforward approach in generating spheroid-like particles and also the orientational orders observed in the self-assembly of these particles. Nonspherical particles, such as spheroid-like particles, are useful in both fundamental studies and industrial applications due to the geometry impact that they bring to the bulk properties of various material systems. Developing processes to generate nonspherical particles is an ongoing quest to meet the need of using such particles in different applications. The approach reported here takes advantage of a controlled chemical etching process. Exposing the spherical silica particles partially to carbon tetrafluoride in a reactive ion plasma-etching chamber transformed the particles from spherical shape into spheroid-like shape. A simple model is proposed to predict the geometry of the resulting nonspherical particles. The shape and dimension of the nonspherical particles generated through such a process matched well with the prediction of the model. The assembly of these spheroid-like particles showed a unique orientational order associated with the alignment of their axes. This approach will help further studies on the fundamental properties of the nonspherical particles, such as packing, rheology, and optical interaction.     

Size-controlled, one-pot synthesis, characterization, and biological applications of epoxy-organosilica particles possessing positive zeta potential

Epoxy-organosilica particles made from 2-(3,4-epoxycyclohexyl)ethyltrimethoxysilane (EpoMS) as a single silica source were synthesized by means of a one-pot method. We evaluated three sets of synthesis conditions, including traditional Stober conditions and two variations. Although the traditional conditions did not afford EpoMS particles, the variations did. The size distributions of the particles were evaluated by means of transmission electron microscopy. The mean diameters and size distributions of the particles depended on the EpoMS concentration, and the best coefficient of variation for the size distribution was 5.9%. The surface of the particles had unique properties, such as a positive zeta potential. The particles bound strongly to proteins as well as to DNA. The particles made from EpoMS, allowing particles internally functionalized with fluorescent dye to be prepared by means of a one-pot synthesis. EpoMS particles doped and tuned with fluorescent dye showed strong fluorescence signals and distinct peaks on flow cytometry, and the fluorescent particles could be used to label cells. The labeled cells showed clear fluorescence under a fluorescence microscope, and electron microscopy showed many particles in the cytoplasm. This is the first report describing the synthesis of epoxy-organosilica particles with a positive zeta potential and describing differences in the characteristics of particle formations due to changes in synthesis conditions. We also discuss the advantages of EpoMS particles, as well as the potential biological applications of these particles.     

Crystal habit of fcc metal particles controlled by electrode potential in solution

The crystal habit of fcc metal particles formed on an amorphous carbon film electrode in solution at different electrode potentials is discussed. The fcc metal particles have different crystallographic habits depending on applied electrode potential; that is, icosahedral and/or decahedral particles are formed at lower potentials, and fcc single-crystalline or polycrystalline particles at higher potentials. It was found that decahedra and icosahedra of Cu-Au alloy particles are formed in the potential region of underpotential deposition (UPD) of Cu at which only fcc Au single-crystalline particles and Au polycrystalline particles appear. This is attributed to the charge transfer from the UPD Cu ions to the Au overlayer of Cu-Au alloy particles. The formation of decahedral and icosahedral Cu-Au alloy particles depends on the composition of the Cu-Au alloy. On the basis of these results it was deduced that the contraction of the surface lattice of the growing particles is responsible for the formation of icosahedral and decahedral particles. Received: 25 February 1997 / Accepted: 21 April 1997     

聚合物粒子在生物化学与生物医学中的应用

就亚微米和单粒径两种新型的聚合物粒子在生物化学与生物医学如免疫分析、药物载体、真核细胞、原核细胞及生物大分子产品等的分离等领域中的最新应用进行了综述。     

扫描探针显微技术研究聚苯乙烯单链颗粒的力学响应

首先通过极稀溶液滴膜的方法得到了聚苯乙烯的单链颗粒 .之后 ,采用稍浓溶液得到了既有单链聚苯乙烯颗粒又有多链 (上千根 )聚苯乙烯颗粒的样品 .力调制技术显示单链聚苯乙烯颗粒比多链聚苯乙烯颗粒软 ;另一方面 ,对多链聚苯乙烯颗粒和聚苯乙烯本体的纳米压印实验结果表明二者的模量是近似的 .因此 ,可以得出单链聚苯乙烯颗粒比本体聚苯乙烯软 ,这说明存在于聚苯乙烯单链颗粒中的分子链内的缠结点密度不如存在于本体中的分子链间的缠结点密度大     

中药配方颗粒红外指纹图谱研究

采用傅里叶变换红外光谱(FTIR)技术分析鉴别了350种中药配方颗粒红外指纹图谱的结构特征。结果表明，借助于各种药用植物和动物配方颗粒的FTIR指纹图谱的差别可进行快速分类鉴别；根据配方颗粒与中药原药材谱图之间的相关性，以及中药材经过炮制、加热、水提处理后，配方颗粒与原药材之间在谱图上所代表的化学成分上的异同可以进行中药配方颗粒的质量控制；凭借不同炮制方法与未经炮制处理的配方颗粒间FTIR谱图的差别，可以进一步分析炮制后配方颗粒化学成分的变化，不同炮制方法对配方颗粒化学成分的影响；对于不同厂家的配方颗粒及同一厂家不同生产批号的配方颗粒也进行了较系统的分析研究。方法快速，简便，专属性强，不需对样品进行分离提取。     

The Enhanced MR Effect of Dense Magnetic Particles Suspensions Consisting of Superfine α-Fe Particles

It is reported that magnetorheological (MR) effect was enhanced when superfineα-Fe particles and other nanosize particles were added to suspensions of dense micron magnetic particles. The effect of adding superfine particles on dynamics shear stress, sedimentation stability and structure of solidified MR of magnetic suspensions were studied. The experiment showed considerable increase of shear stress and much stability of sedimentation when the suspension consisting of superfine particles. The enhanced MR effect by superfine particles dealt with the properties, weight ratio and scale of superfine particles.     

Preparation of multihollow polymer particles by seeded emulsion polymerization using seed particles with incorporated nonionic emulsifier

Emulsion polymerizations of styrene using poly(oxyethylene) nonylphenyl ether nonionic emulsifier were carried out at different emulsifier and initiator (potassium persulfate, KPS) concentrations to prepare polystyrene (PS) seed particles with incorporated nonionic emulsifier. Seeded emulsion polymerizations of styrene using the PS seed particles with different amounts of incorporated emulsifier were carried out to develop a novel method for the preparation of multihollow particles. When seed particles with a small amount of incorporated emulsifier were used, non-hollow spherical particles were prepared. However, multihollow particles were obtained in the case of seed particles with a large amount of incorporated emulsifier. Moreover, the higher the initiator concentration in the preparation of seed particles, the more effectively were hollow particles prepared. On the basis of the above results, a mechanism for the formation of multihollow structure was suggested.     

用直接数值模拟对移动颗粒层除尘的研究及实验对比

利用气固两相流数值模拟计算模型，分别采用不同粒径的移动颗粒层过滤除尘器，对不同粒径粉尘颗粒的碰撞次数进行统计，并对移动床除尘中过滤介质尺寸与粉尘粒径尺寸之间的相互选择性进行了初步研究。模拟计算了在同一风速下碰撞次数与粉尘粒径以及移动层颗粒径之间的关系。计算统计的结果与实验结果对比发现，二者存在定性上的一致。结果表明，在移动床过滤除尘器中不同粒径的过滤层对不同粒径尘粒具有明显的选择性。     

Pickering emulsion polymerization of graphene oxide-stabilized styrene

Polystyrene (PS) particles were prepared via Pickering emulsion polymerization using graphene oxide (GO) as the stabilizer. The results show that pH is an important factor in the stability of Pickering emulsions. The effects of two different phase initiators, the water phase initiator potassium persulfate and the oil phase initiator azobisisobutyronitrile, on the morphology of PS particles in Pickering emulsion polymerization had been investigated in detail. Wrinkled particles were prepared using the water phase initiator, and spherical particles were prepared using the oil phase initiator. In addition, hexadecane was used as the auxiliary stabilizer in the polymerization, which narrowed the diameter distribution of the PS spheres, and the hollow PS spheres were fabricated. The size of the GO particles also influenced the final morphology of the particles. Nano-sized polymer particles were grafted onto the surface of micro-sized GO. Small GO particles were suitable for Pickering emulsion polymerization to prepare the composite particles. The thermogravimetric analysis of the prepared particles confirmed that they were PS/GO composite particles, which could have a wide range of potential applications, such as in catalysts, sensors, environmental remediation, and energy storage.     

Fabrication of a composite colloidal particle with unusual janus structure as a high-performance solid emulsifier

Core-shell particles with cross-linked core and shell were used as seed particles to produce composite Janus particles. It was found that when the shell has distinctly higher cross-linking degree than the core, Janus particles with very unusual structures can be obtained. These particles have two parts, with one part embraced partially or entirely by the other part, adjustable by parameters such as phase ratio or cross-linking degree. On the basis of experimental observations, a possible mechanism for the formation of such unusual Janus particles has been proposed. Janus particles with arms are used to emulsify water-toluene mixtures, forming oil-in-water (O/W) emulsions at very high internal phase content with rather low concentration of particles. Nonspherical emulsion droplets were observed, indicating that these Janus particles are likely to jam at the interface, forming a strong protecting layer to stabilize emulsions.     

两亲性Janus粒子在蜂窝状多孔聚合物膜上的自组装性能

采用具有两亲性的两面体(Janus)粒子实现稳定的粒子界面组装与水滴模板法自组装过程相结合的方法获得了粒子在蜂窝状多孔聚合物薄膜内壁的高效定向修饰.通过与均质粒子组装形貌的对比,证明了Janus粒子因其特殊的界面自组装活性,可以获得高粒子加量条件下的规则多孔结构,解决了使用均质粒子时存在的结构有序性和粒子修饰密度之间的矛盾.而在较低粒子加量的条件下,Janus粒子也展示出与均质粒子极为不同的组装形貌.这一方法的建立,为新型表面功能化材料的制备提供了一个新的思路.     

Temperature-induced crystallization and compactibility of spray dried composite particles composed of amorphous lactose and various types of water-soluble polymer

The purpose of this study was to investigate the temperature-induced crystallization and the compactibility of the composite particles containing amorphous lactose and various types of polymers. The composite particles were prepared by spray-drying an aqueous solution of lactose and various types of gel forming water-soluble polymers at various formulating ratios. The stabilizing effect of hydroxypropylcellulose (HPC) and polyvinyl pyrrolidone (PVP) on amorphous lactose in the composite particles was smaller than that of sodium alginate in comparing at the same formulating ratios. The difference in the stability of amorphous lactose in the composite particles was attributed to the difference in the glass transition temperature (Tg) of the composite particles caused by the polymers formulated. The tensile strength of compacted spray-dried composite particles containing the polymers was higher than commercial lactose for direct tabletting (DCL21). The tensile strength of the composite particles was increased with an increase in water content in the particles. The difference in compactibility of the composite particles containing the different amount of polymer and water could be explained by the difference in Tg of the particles.     

Effects of amino acids on the formation of hematite particles in a forced hydrolysis reaction

The influence of amino acids on the formation of hematite particles from a forced hydrolysis reaction of acidic FeCl3 solution was examined. The spherical particles were produced on the systems with L-phenylalanine (L-Phe), L-serine (L-Ser) and L-alanine (L-Ala), though L-glutamine (L-Gln) and L-glutamic acid (L-Glu) gave ellipsoidal hematite particles. This morphological change in hematite particles is consistent with the order of stability constant of amino acids against to Fe3+ ions (K). The hematite particles produced with L-Glu, L-Gln and L-Ser were highly porous because they are formed by aggregation of cluster particles. These particles exhibited microporous behavior by outgassing the particles below 200 degrees C while they changed to mesoporous after treating above 300 degrees C by elimination of amino acids molecules remained between the cluster particles within the hematite particles. The hematite particles strongly depended on the nature of amino acids such as alternation of solution pH and adsorption affinity to beta-FeOOH and/or polynuclear primary (PN) particles. The systems on L-Ala and L-Phe, showing very rapid phase transformation from beta-FeOOH to hematite, exhibited the Ostwald ripening. A rotational particle preparation procedure suggested that the morphology of hematite particle is governed by the mode and strength of amino acid adsorption onto beta-FeOOH and/or PN particles.     

Photocurable pickering emulsion for colloidal particles with structural complexity

We prepared polymeric microparticles with coordinated patches using oil-in-water emulsion droplets which were stabilized by adsorbed colloidal polystyrene (PS) latex particles. The oil phase was photocurable ethoxylated trimethylolpropane triacrylate (ETPTA), and the particle-armored oil droplets were solidified by UV irradiation within a few seconds to produce ETPTA-PS composite microparticles without disturbing the structures. Large armored emulsion drops became raspberry-like particles, while small emulsion drops with a few anchored particles were transformed into colloidal clusters with well-coordinated patches. For high-molecular-weight PS particles with low chemical affinity to the ETPTA monomer, the morphology of the patchy particle was determined by the volume of the emulsion drop and the contact angle of the emulsion interface on the PS particle surface. Meanwhile, for low-molecular-weight PS particles with high affinity, the ETPTA monomers were likely to swell the adsorbed PS particles, and distinctive morphologies were induced during the shrinkage of emulsion drops and the phase separation of ETPTA from the swollen PS particles. In addition, colloidal particles with large open windows were produced by dissolving the PS particles from the patchy particles. We observed photoluminescent emission from the patchy particles in which dye molecules were dispersed in the ETPTA phase. Finally, we used Surface Evolver simulation to predict equilibrium structures of patchy particles and estimate surface energies which are essential to understand the underlying physics.     

Distribution of macropores in silica particles prepared by using multiple emulsions

The distribution of macropores in silica particles prepared by the hydrolysis and condensation of TEOS in a hexane/water/decyl alcohol (O(1)/W/O(2)) multiple emulsion was investigated. To stabilize the emulsion structure, hydroxypropyl cellulose (HPC) was added into the O(2) phase and polyethylene glycol (PEG) was added into the water phase. Without HPC, the particles have an irregular shape and hardly have particulate forms. As the concentration of HPC increases, the shape of particles becomes more and more spherical and the size decreases. The size of silica particles was varied from 5 to 1 microm as the concentration of HPC increased from 0.5 to 0.7 wt%. The number and size of the macropores in silica particles were affected by PEG polymer concentration. With the variation in the concentration of PEG, macropores in silica particles were located at the surface of or inside the particles. At high concentrations of PEG, the macropores in particles were located inside the particles, but at low concentrations of PEG the macropores were located at the surfaces of particles. Interestingly, the particles of dimpled surfaces were formed when the molar ratio of water to TEOS (R(w)) was 4.0 and the concentrations of PEG and HPC were 2.0 and 0.7 wt% respectively. The surface areas of dimpled silica particles and completely spherical particles, measured by the BET method, were 409 and 433 m(2)/g respectively.     

Anisotropic particles with patchy, multicompartment and Janus architectures: preparation and application

Anisotropic particles, such as patchy, multicompartment and Janus particles, have attracted significant attention in recent years due to their novel morphologies and diverse potential applications. The non-centrosymmetric features of these particles make them a unique class of nano- or micro-colloidal materials. Patchy particles usually have different compositional patches in the corona, whereas multicompartment particles have a multi-phasic anisotropic architecture in the core domain. In contrast, Janus particles, named after the double-faced Roman god, have a strictly biphasic geometry of distinct compositions and properties in the core and/or corona. The term Janus particles, multicompartment particles and patchy particles frequently appears in the literature, however, they are sometimes misused due to their structural similarity. Therefore, in this critical review we classify the key features of these different anisotropic colloidal particles and compare structural properties as well as discuss their preparation and application. This review brings together and highlights the significant advances in the last 2 to 3 years in the fabrication and application of these novel patchy, multicompartment and Janus particles (98 references).