Ag2S-石墨烯/TiO2的声化学法合成及可见光催化活性（英文）

Ag2S‐graphene/TiO2 composites were synthesized by a facile sonochemical method.The products were characterized by X‐ray diffraction,scanning electron microscopy,energy dispersive X‐ray spectroscopy,transmission electron microscopy,and UV‐Vis diffuse reflectance spectrophotometry.During the synthesis reaction,the reduction of graphene oxide and loading of Ag2S and TiO2 particles were achieved.The Ag2S‐graphene/TiO2 composites possessed a large adsorption capacity for dyes,an extended light absorption range,and efficient charge separation properties.Hence,in the photodegradation of rhodamine B,a significant enhancement in the reaction rate was observed with the Ag2S‐graphene/TiO2 composites as compared to pure TiO2.The generation of reactive oxygen species was detected by the oxidation of 1,5‐diphenyl carbazide to 1,5‐diphenyl carbazone.The high activity was attributed to the synergetic effects of high charge mobility and the red shift in the absorption edge of the Ag2S‐graphene/TiO2 composites.     

磷掺杂TiO2薄膜的制备与表征及其可见光照射下光催化降解邻苯二甲酸丁苄酯性能（英文）

P‐doped TiO2 (PTIO) thin‐films with different P contents were prepared using a sol‐gel method. The thin‐film samples were characterized using various techniques. The photocatalytic activity was evaluated by decomposing butyl benzyl phthalate under visible‐light irradiation. The results showed that the transformation of anatase to the rutile phase was inhibited and grain growth of TiO2 was prevented by P doping. The results confirm that the doped P atoms existed in two chemical forms, and those incorporated in the TiO2 lattice may play a positive role in photocatalysis. The high photocatalytic activities of the PTIO thin‐films may be the result of extrinsic absorption through the creation of oxygen vacancies, rather than excitation of the intrinsic absorption band of bulk TiO2 . The PTIO can be recycled with little depression of the photocatalytic activity. After six cycles, the photocatalytic activity of the PTIO film was still higher than 98%.     

铂沉积对Ga2O3-SiO2纳米粒子光催化性能的提高（英文）

Ga2O3‐SiO2 nanoparticles were prepared by a sol‐gel method and Pt was then immobilized on their surface via photo‐assisted deposition (PAD). The produced samples were characterized using X‐ray diffraction (XRD), ultraviolet and visible spectroscopy, photoluminescence emission spectroscopy, and surface area measurements. The catalytic performances of the Ga2O3‐SiO2 and Pt/ Ga2O3‐SiO2 samples were evaluated for the degradation of cyanide using visible light. XRD and EDX results showed that the Pt was well dispersed within the Ga2O3‐SiO2 phase and was detected on the surface of the catalyst, which confirmed the successful loading of Pt ions by the PAD method. BET results revealed that the surface area of Ga2O3‐SiO2 was higher than that of Pt/Ga2O3‐SiO2 . 0.3 wt% Pt/Ga2O3‐SiO2 exhibited the highest photocatalytic activity for degradation of cyanide under visible light. The catalyst could be reused with no loss in activity for the first 10 cycles.     

具有稳定可见光催化活性TiO2薄膜的常温制备

采用溶胶-凝胶法，通过钛酸丁酯水解制备了具有锐钛矿-金红石-板钛矿混晶晶粒的TiO₂溶胶。以四磺酸酞菁铜(CuTsPc)为敏化剂，经水浴加热后获得具有可见光响应活性的TiO₂溶胶。使用该溶胶浸渍-提拉涂膜，在室温下晾干即可得到酞菁敏化的TiO₂薄膜(CuTsPc-TiO₂)。对敏化溶胶的制备条件及薄膜的性能进行了考察，并探讨了CuTsPc的负载机理。结果表明:延长水浴时间或提高TiO₂溶胶中的CuTsPc浓度有利于增大薄膜中CuTsPc的负载量。随着薄膜中CuTsPc量的增加，薄膜的可见光催化活性增强，但CuTsPc负载过多又会导致薄膜光催化活性降低。CuTsPc通过静电作用在TiO₂胶粒表面发生吸附，从而实现在薄膜中均匀、牢固的负载，保证了CuTsPc-TiO₂薄膜在循环使用过程中的稳定性。     

CoS2-碳(C60,石墨,碳纳米管)/TiO2复合光敏剂光降解有机染料（英文）

CoS2,CoS 2-C60 /TiO2,CoS2-CNT/TiO2,and CoS2-Graphene/TiO2 were prepared.The TiO2 products had the anatase phase structure and interesting surface compositions.X-ray diffraction patterns of the CoS2-carbon/TiO2 composites showed a single and clear anatase phase and the CoS2 structure.Scanning electron microscopy characterization of the texture on the CoS 2-carbon/TiO2 composites showed a homogenous composition.Energy-dispersive X-ray spectra for elemental identification showed the presence of C and Ti with strong Co and S peaks from the CoS2-carbon/TiO2 composites.The composites obtained were also characterized by transmission electron microscopy and UV-Vis spectroscopy.CoS2-carbon/TiO2 composites showed excellent photocatalytic activity for the degradation of methylene blue under visible light irradiation.This was attributed to both photocatalysis on the TiO2 support and charge transfer by the carbon nanomaterial,and the introduction of CoS2 to enhance transfer of photogenerated electrons.     

紫外和可见光照射下Fe-TiO2复合材料催化低浓度芳香族有机污染物降解（英文）

Fe‐TiO2 photocatalysts with different ratios of Fe to Ti were prepared by a sol‐gel process using tetra‐n‐butyl titanium and iron(III) nitrate as Ti and Fe sources, respectively. The photocatalytic function of the prepared composites was examined for the decomposition of low‐concentration(0.1 ppm) airborne benzene, toluene, ethyl benzene, and o‐xylene(BTEX). The Fe‐TiO2 composites were characterized by energy dispersive X‐ray spectroscopy, X‐ray diffraction, UV‐visible spectroscopy, and Fourier transform infrared spectroscopy. The time‐series ratios of outlet to inlet concentrations of toluene, ethyl benzene, and o‐xylene target chemicals, as determined by the Fe‐TiO2 composites under visible light exposure, were lower than or similar to those of the reference TiO2 photocatalyst. Moreover, the time‐series ratios of outlet to inlet concentrations of the three compounds, as determined for the Fe‐TiO2 composites, increased as the ratio of Fe to Ti increased from 0.001 to 0.010. In contrast, under UV exposure, the time‐series ratios of outlet to inlet concentrations of BTEX, determined for the Fe‐TiO2 composites, were similar to or higher than those obtained from the reference TiO2 photocatalyst. Fe‐TiO2 composites with an optimal Fe to Ti ratio could effectively be applied for the purification of low‐concentration aromatic organic pollutants.     

MoO3-TiO2纳米晶体复合材料光降解糖蜜（英文）

A MoO3-TiO2 nanocrystalline composite material was prepared by a simple solgel method.The synthesized material was charac-terized by X-ray diffraction,scanning electron microscopy with an electron dispersion spectroscopy,transmission electron microscopy,and Fourier transform infrared spectroscopy.Melanoidin is a dark brown pigment found in wastewater from the sugar industry and it pollutes water.This polluted water is generally referred to as molasses and it undergoes fermentation and is solely responsible for water,soil,and air pollution.The synthesized catalytic material was found to be effective in degrading molasses under UV-visible radiation.Analysis of treated and untreated molasses was carried out by measuring its color,chemical oxygen demand,biological oxygen demand,pH,and total dissolved solid.Results from these analyses indicate the effective photodegradation of the molasses.This methodology has several advantages such as high photocatalytic activity,non-toxicity,cleanliness,and reusability of the catalytic material.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

高活性多壁碳纳米管/TiO2纳米复合物光催化剂光催化降解活性黑5染料（英文）

A nanocomposite UV-visible light-responsive multiwalled carbon nanotube (MWCNT)/titanium dioxide(TiO2) nanophotocatalyst was successfully synthesized by a modified sol-gel method using titanium isopropoxide and functionalized MWCNTs as the starting precursors. The photocatalytic activity of the TiO2 and the nanohybrid material was investigated through the photodegradation of Reactive Black 5 dye under ultraviolet light irradiation. X-ray diffraction analysis indicated that anatase phase was obtained for both the pure TiO2 and the MWCNT/TiO2 composite, while Raman spectroscopy confirmed the presence of MWCNTs in the composite. Field emission scanning elec-tron microscopy revealed that TiO2 nanoparticles with an individual diameter of about 10–20 nm were coated on the surface of the MWCNTs. The specific surface areas of the samples were found to be 80 and 181 m2/g for the pure TiO2 and MWCNT/TiO2, respectively. As a result, MWCNT/TiO2 showed better photocatalytic performance than pure TiO2 because the high surface area of MWCNTs enabled them to function as good electron acceptors for the retardation of electron-hole pair recombination.     

双介孔结构的纳米TiO2/I2复合材料的制备及其可见光催化性能

以钛酸丁酯为前驱体, 碘溶胶为碘源, 在室温下采用水解沉淀法制备了单质碘和纳米TiO₂复合的双介孔结构光催化剂(M-I₂-TiO₂). 采用X射线衍射(XRD)、透射电子显微镜(TEM)、比表面分析(BET)、紫外-可见(UV-Vis)漫反射光谱和傅里叶变换-红外光谱(FT-IR)对M-I₂-TiO₂进行了表征. 以次甲基蓝(MB)溶液为模拟废水, 对M-I₂-TiO₂的光催化性能进行了评价, 研究了不同热处理温度对光催化活性的影响. 结果表明, M-I₂-TiO₂在可见光区有显著的吸收, 300 ℃热处理得到的样品比表面积高达227.6 m²/g, 600 ℃热处理所得样品的比表面积仍高达111.8 m²/g, 而400 ℃热处理所得样品具有最好的光催化降解性能. 双介孔结构纳米TiO₂/I₂复合材料的光催化降解性能显著高于相同方法制备的纯TiO₂和Degussa P-25商业产品. 催化剂经6次重复使用其光催化活性基本保持不变.     

MoO3改性的TiO2在可见光下催化降解亚甲基蓝

采用浸渍法制备了MoO₃/P25催化剂（MoO₃/P25（x）,x为MoO₃与P25质量比）,用X射线衍射、紫外-可见漫反射光谱、傅里叶变换红外光谱及拉曼光谱等手段对样品进行了表征,并用催化降解亚甲基蓝考察了催化剂在可见光区的催化活性。结果表明,MoO₃在P25表面最大单层负载量对应的MoO₃与P25质量比在0.1左右。单层分散的氧化钼物种与P25之间有较强的相互作用,降低了P25禁带宽度,提高了催化剂对可见光的吸收。当MoO₃与P25质量比大于0.1时,会生成晶相MoO₃,催化剂对可见光的吸收反而随MoO₃担载量增加而降低。催化剂禁带宽度不是决定其可见光下催化降解亚甲基蓝活性的唯一因素。具有适宜禁带宽度和一定晶相MoO₃含量的MoO₃/P25（0.25）表现出最佳活性。     

Low-temperature hydrothermal synthesis of S-doped TiO2 with visible light photocatalytic activity

A one-step low-temperature hydrothermal route was developed for the synthesis of S-doped TiO₂ photocatalysts from TiS₂ and HCl. Crystalline TiO₂ was formed and sulfur could be efficiently doped into the anatase lattice under hydrothermal conditions. When the initial TiS₂ concentration is increased, the content of S-dopant and optical absorption in the visible region also increase. The photocatalytic activity of the S-doped TiO₂ was evaluated through the degradation of 4-chlorophenol under visible light irradiation. Our results show that the S-doped TiO₂ prepared by this hydrothermal approach possesses much higher photocatalytic activity than that obtained by the traditional high-temperature thermal annealing method.     

铋掺杂二氧化钛纳米颗粒的制备及其可见光催化性能

采用水热法,以纳米管钛酸为前驱物制备了Bi掺杂的TiO₂,并利用X射线衍射、透射电子显微镜、X射线光电子能谱、紫外-可见漫反射光谱等手段对样品进行了表征. 以甲基橙的光催化降解为模型反应评价了样品的可见光催化性能. 结果表明,Bi离子并没有进入TiO₂的晶格中,而是以BiOCl的形式存在. 所制得的BiOCl/TiO₂复合物对甲基橙降解表现出较优越的可见光催化活性;当Bi/Ti摩尔比为1%,水热温度为130℃时,所制催化剂的光催化性能最佳,并对光催化活性提高的机理进行了讨论. 同时,该催化剂对4-氯苯酚降解也表现出较高的光催化性能.     

Simultaneous degradation of non-emissive and emissive dyes on visible light illuminated TiO2 surface

Simultaneous photocatalytic degradation of non-emissive dye, acid blue1 (AB1) and emissive dyes (eosinY or thionine) in air-equilibrated aqueous suspension of TiO₂ semiconductor photocatalyst has been achieved at ambient conditions. Under visible light irradiation AB1 undergoes appreciable degradation in presence of a sensitizing dye (eosinY or thionine). However, concomitant decoloration of eosinY (EY) or thionine (Th) due to self-sensitized degradation was also noticed. Mechanistic proposals for the photocatalytic degradation of AB1 using a 150 W Xe lamp with a UV-filter (λ > 420 nm) as well as without a UV-filter, are discussed. Formation of reactive O₂⁻/HO₂ radicals is proposed to be responsible for the degradation of the selected dyes, AB1, EY and Th.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.