Combined XPS and DFT investigation of the adsorption modes of methyl enol ether functionalized cyclooctyne on Si(001)

The reaction of methyl enol ether functionalized cyclooctyne on the silicon (001) surface was investigated by means of X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). Three different groups of final states were identified; all of them bind on Si(001) via the strained triple bond of cyclooctyne but they differ in the configuration of the methyl enol ether group. The majority of molecules adsorbs without additional reaction of the enol ether group; the relative contribution of this configuration to the total coverage depends on substrate temperature and coverage. Further configurations include enol ether groups which reacted on the silicon surface either via ether cleavage or enol ether groups which transformed on the surface into a carbonyl group.     

Reactions of novel mono- and difluoroacetyltrialkylsilanes with sulfur and phosphorus ylides

The reactions of difluoroacetyltrialkylsilanes with methylidene triphenylphosphorane and benzylidene triphenylphosphorane are affected by the nature of the silyl substituents giving either the enol silyl ether or normal Wittig product exclusively, or mixture of both. Reactions with Horner-Emmons type ylide gave only the alkene products. Reactions of mono- and difluoroacetyltrialkylsilanes with dimethylsulfoxonium methylide gave the enol silyl ether products exclusively. Conversion of an enol silyl ether to an epoxide was effected with m-CPBA.     

New approaches toward the synthesis of (D-homo) steroid skeletons using Mukaiyama reactions

New, short, and flexible procedures have been developed for syntheses of steroid and D-homo steroid skeletons. A Mukaiyama reaction between the silyl enol ether of 6-methoxytetralone and 2-methyl-2-cyclopentenone or carvone, with transfer of the silyl group to the receiving enone, gave a second silyl enol ether. Addition of a carbocation, generated under Lewis acid conditions from 3-methoxy-2-butenol, 3-ethoxy-3-phenyl-2-propenol or 3-methoxy-2-propenol to this second silyl enol ether gave adducts, which could not be cyclized by aldol condensation to (D-homo) steroid skeletons. The Mukaiyama-Michael reaction of the silyl enol ether of 6-methoxy tetralone with 2-methyl-2-cylopentenone gave a second silyl enol ether, which reacted in high yield with a carbocation generated from 3-hydroxy-3-(4-methoxyphenyl)propene. Ozonolysis of the double bond in this adduct gave a tricarbonyl compound (Zieglers triketone), which has been used before in the synthesis of 9,11-dehydroestrone methyl ether. A second synthesis of C17 substituted CD-trans coupled (D-homo) steroid skeletons has been developed via addition of a carbocation, generated with ZnBr₂ from a Torgov reagent, to a silyl enol ether containing ring D precursor. The obtained seco steroids have been cyclized under formation of the 8-14 bond by treatment with acid. The double bonds in one of the cyclized products have been reduced to a C17-substituted all trans steroid skeleton.     

Synthesis of methyl 1-hydroxy-6-oxo-2-cyclohexenecarboxylate, a component of salicortin and tremulacin, and the monomer of idesolide

We have developed a short and practical first synthesis of methyl 1-hydroxy-6-oxo-2-cyclohexenecarboxylate (2), which has been known as a component of salicortin and tremulacin since 1970. Birch reduction of the SEM ether of methyl salicylate followed by oxidation of the intermediate enolate with (-)-camphorsulfonyloxaziridine afforded the SEM enol ether of 2. Hydrolysis of the SEM enol ether afforded 2. We did not observe the dimerization of either racemic or optically enriched 2 to give idesolide (1).     

Acid Catalyzed Condensation of Phenylethanal Enol or Thiol Enol Ether to 2-Phenylnaphthalene

Treatment of enol ether or thiol enol ether of phenylethanals with sulfuric or polyphosphoric acid in toluene or xylene gave 2-phenylnaphthalene in good yield. More importantly, a one-pot reaction has been developed.     

The mannich reaction-II : Derivatization of aldehydes and ketones using dimethyl(methylene)ammonium salts

Aldehydes and ketones have been converted efficiently to their corresponding Mannich products by various dimethyl(methylene)ammonium salts under a range of reaction conditions. The several methods used to form these derivatives are compared. Excellent approaches to aldehyde derivatives involve treating the enol silyl ether of the carbonyl compound with methyllithium and then an iminium salt, or directly adding the iminium salt to the enol silyl ether. Ketones may be derivatized effectively by treatment with potassium hydride, followed by an iminium salt, or from the enol silyl ether by addition of the iminium reagent. Use of iminium reagents in the Mannich reaction is recommended because the yields are often good and the site of attachment on an unsymmetrical ketone is both predictable and controllable.     

Anodic cyclization reactions: capitalizing on an intramolecular electron transfer to trigger the synthesis of a key tetrahydropyran building block

An anodic cyclization reaction between an enol ether radical cation and an oxygen nucleophile has been used to make a tetrahydropyran building block for the C(10)-C(16) portion of bryostatin. The oxidative cyclization was successful despite the presence of a thioacetal group that has a lower oxidation potential than the enol ether. Experimental evidence suggested that the reaction proceeded through an initial oxidation of the thioacetal followed by an intramolecular electron transfer to form the enol ether radical cation that was subsequently trapped by the oxygen nucleophile. The formation of the desired cyclic product could be explained using the Curtin-Hammett principle. By taking advantage of the intramolecular electron-transfer reaction, we used the presence of a thioacetal in an electrolysis substrate to selectively oxidize a proximal enol ether in the presence of an otherwise identical but more remote enol ether.     

Enol ethers as substrates for efficient Z- and enantioselective ring-opening/cross-metathesis reactions promoted by stereogenic-at-Mo complexes: utility in chemical synthesis and mechanistic attributes

The first examples of catalytic enantioselective ring-opening/cross-metathesis (EROCM) reactions that involve enol ethers are reported. Specifically, we demonstrate that catalytic EROCM of several oxa- and azabicycles, cyclobutenes and a cyclopropene with an alkyl- or aryl-substituted enol ether proceed readily in the presence of a stereogenic-at-Mo monopyrrolide-monoaryloxide. In some instances, as little as 0.15 mol % of the catalytically active alkylidene is sufficient to promote complete conversion within 10 min. The desired products are formed in up to 90% yield and >99:1 enantiomeric ratio (er) with the disubstituted enol ether generated in >90% Z selectivity. The enol ether of the enantiomerically enriched products can be easily differentiated from the terminal alkene through a number of functionalization procedures that lead to the formation of useful intermediates for chemical synthesis (e.g., efficient acid hydrolysis to afford the enantiomerically enriched carboxaldehyde). In certain cases, enantioselectivity is strongly dependent on enol ether concentration: larger equivalents of the cross partner leads to the formation of products of high enantiomeric purity (versus near racemic products with one equivalent). The length of reaction time can be critical to product enantiomeric purity; high enantioselectivity in reactions that proceed to >98% conversion in as brief a reaction time as 30 s can be nearly entirely eroded within 30 min. Mechanistic rationale that accounts for the above characteristics of the catalytic process is provided.     

Convergent assembly of polycyclic ethers via acyl radical addition to unactivated enol ether

A new convergent strategy for assembling 6/6- and 6/7-fused ether ring systems was developed. The key features in our method include Ag+-promoted facile formation of chemically labile enol ether from O,S-acetal and addition of an acyl radical to unactivated enol ether to cyclize a six- or seven-membered ether ring. [reaction: see text]     

Mechanistic investigation of substrate oxidation by Ce(IV) reagents in acetonitrile

Rates and activation parameters for the Ce(4+)-mediated oxidation of a beta-keto ester, a beta-diketone, and a beta-keto silyl enol ether were determined in acetonitrile. In the case of the dicarbonyls, the enol content of the substrate impacts the rate of oxidation by Ce(4+), predominantly through contributions from DeltaH(). For the silyl enol ether, the transition state for oxidation by Ce(4+) is substantially more ordered than it is for the beta-keto ester or the beta-diketone.     

alpha-Nitration of Ketones via Enol Silyl Ethers. Radical Cations as Reactive Intermediates in Thermal and Photochemical Processes

Highly colored (red) solutions of various enol silyl ethers and tetranitromethane (TNM) are readily bleached to afford good yields of alpha-nitro ketones in the dark at room temperature or below. Spectral analysis show the red colors to be associated with the intermolecular 1:1 electron donor-acceptor (EDA) complexes between the enol silyl ether and TNM. The formation of similar vividly colored EDA complexes with other electron acceptors (such as chloranil, tetracyanobenzene, tetracyanoquinodimethane, etc.) readily establish enol silyl ethers to be excellent electron donors. The deliberate irradiation of the diagnostic (red) charge-transfer absorption bands of the EDA complexes of enol silyl ethers and TNM at -40 degrees C affords directly the same alpha-nitro ketones, under conditions in which the thermal reaction is too slow to compete. A common pathway is discussed in which the electron transfer from the enol silyl ether (ESE) to TNM results in the radical ion triad [ESE(*)(+), NO(2)(*), C(NO(2))(3)(-)]. A subsequent fast homolytic coupling of the cation radical of the enol silyl ether with NO(2)(*)() leads to the alpha-nitro ketones. The use of time-resolved spectroscopy and the disparate behavior of the isomeric enol silyl ethers of alpha- and beta-tetralones as well as of 2-methylcyclohexanone strongly support cation radicals (ESE(*)(+)) as the critical intermediate in thermal and photoinduced electron-transfer as described in Schemes 1 and 2, respectively.     

Palladium‐Catalyzed Reductive Insertion of Alcohols into Aryl Ether Bonds

Palladium on carbon catalyzes C?O bond cleavage of aryl ethers (diphenyl ether and cyclohexyl phenyl ether) by alcohols (R?OH) in H₂. The aromatic C?O bond is cleaved by reductive solvolysis, which is initiated by Pd‐catalyzed partial hydrogenation of one phenyl ring to form an enol ether. The enol ether reacts rapidly with alcohols to form a ketal, which generates 1‐cyclohexenyl?O?R by eliminating phenol or an alkanol. Subsequent hydrogenation leads to cyclohexyl?O?R.     

Synthesis of polyprenylated acylphloroglucinols using bridgehead lithiation: the total synthesis of racemic clusianone and a formal synthesis of racemic garsubellin A

The synthesis of polyprenylated phloroglucinol natural products, including clusianone, nemorosone, and garsubellin A, was pursued by a strategy involving construction of a core bicyclo[3.3.1]nonanetrione structure and subsequent elaboration via organolithium intermediates. Appropriate bridged core structures were obtained through the cyclization of a suitably substituted cyclohexanone enol ether or enol silane with malonyl dichloride. Additional substituents were then introduced by means of regioselective lithiation reactions, including the generation of bridgehead enolates, thus enabling the total synthesis of clusianone and also of an advanced intermediate toward nemorosone. In the case of garsubellin A, an additional THF-like ring was elaborated by a biomimetic 5-exo-tet cyclization of an enol ether (or enol) with a side-chain epoxide. This enabled a formal synthesis of racemic garsubellin A by accessing one of the late intermediates in the Danishefsky synthesis.     

Chiral base-catalyzed aldol reaction of trimethoxysilyl enol ethers: effect of water as an additive on stereoselectivities

An aldol reaction of trimethoxysilyl enol ether catalyzed by lithium binaphtholate is described. The aldol reaction of trimethoxysilyl enol ether derived from cyclohexanone under anhydrous conditions predominantly afforded the anti-aldol adduct with moderate enantioselectivity, whereas the reaction under aqueous conditions predominantly resulted in the syn-adduct and the enantioselectivity of the syn-adduct was considerably improved. The best enantioselectivity was obtained in the reaction of trimethoxysilyl enol ether derived from 1-indanone with cyclohexanecarboxaldehyde (97% ee (syn)). This is the first example of an aldol reaction of trimethoxysilyl enol ether catalyzed by a chiral base.     

Regio- and stereodefined synthesis of trimethylsilyl enol ethers resulted from the isomerization of α-trimethylsilyl ketones

The isomerization of an α-trimethylsilyl ketone is lead to the corresponding trimethylsilyl enol ether with the enhanced regioselectivity by heating or by the assist of trimethylsilyl trifluoromethanesulfonate. The thermal reaction discloses a new regiodefined (E)-selective route to silyl enol ethers.     

Formation and reactivity of silacyclopropenes derived from siloxyalkynes: stereoselective formation of 1,2,4-triols

Silver phosphate-catalyzed silylene transfer to siloxyalkynes provided silacyclopropenes possessing a silyl enol ether functional group. Copper-catalyzed insertions of carbonyl compounds afforded the corresponding oxasilacyclopentenes. The embedded silyl enol ether functionality was treated with various aldehydes and a catalytic amount of Sc(OTf)3 to provide dioxasilacycloheptanones, which resulted from an aldol addition/rearrangement. Stereoselective reduction or allylation of the cyclic ketone, followed by n-Bu4NF deprotection, provided high yields of 1,2,4-triols possessing four contiguous stereocenters.     

Laser flash photolysis kinetic studies of enol ether radical cations. Rate constants for heterolysis of alpha-methoxy-beta-phosphatoxyalkyl radicals and for cyclizations of enol ether radical cations

Two series of enol ether radical cations were studied by laser flash photolysis methods. The radical cations were produced by heterolyses of the phosphate groups from the corresponding alpha-methoxy-beta-diethylphosphatoxy or beta-diphenylphosphatoxy radicals that were produced by 355 nm photolysis of N-hydroxypryidine-2-thione (PTOC) ester radical precursors. Syntheses of the radical precursors are described. Cyclizations of enol ether radical cations 1 gave distonic radical cations containing the diphenylalkyl radical, whereas cyclizations of enol ether radical cations 2 gave distonic radical cation products containing a diphenylcyclopropylcarbinyl radical moiety that rapidly ring-opened to a diphenylalkyl radical product. For 5-exo cyclizations, the heterolysis reactions were rate limiting, whereas for 6-exo and 7-exo cyclizations, the heterolyses were fast and the cyclizations were rate limiting. Rate constants were measured in acetonitrile and in acetonitrile solutions containing 2,2,2-trifluoroethanol, and several Arrhenius functions were determined. The heterolysis reactions showed a strong solvent polarity effect, whereas the cyclization reactions that gave distonic radical cation products did not. Recombination reactions or deprotonations of the radical cation within the first-formed ion pair compete with diffusive escape of the ions, and the yields of distonic radical cation products were a function of solvent polarity and increased in more polar solvent mixtures. The 5-exo cyclizations were fast enough to compete efficiently with other reactions within the ion pair (k approximately 2 x 10(9) s(-1) at 20 degrees C). The 6-exo cyclization reactions of the enol ether radical cations are 100 times faster (radical cations 1) and 10 000 times faster (radical cations 2) than cyclizations of the corresponding radicals (k approximately 4 x 10(7) s(-1) at 20 degrees C). Second-order rate constants were determined for reactions of one enol ether radical cation with water and with methanol; the rate constants at ambient temperature are 1.1 x 10(6) and 1.4 x 10(6) M(-1) s(-1), respectively.     

双环烯醚的合成及其性质的研究

由内酯2和Tebbe试剂反应合成了双环烯醚化合物5-苄氧基-2,8-二亚甲基-3,4,9,10-四氢-2H,8H-苯并[1,2-b; 3,4-b']二吡喃(3), 环烯醚在酸性条件下很容易水解和异构化, 在酸存在下外环烯醚3于10 min内转化为内环烯醚4, 较长的反应时间只能得到水解物或其它分解产物.     

The Ireland-Claisen rearrangement as a probe for the diastereoselectivity of nucleophilic attack on a double bond adjacent to a stereogenic centre carrying a silyl group

The E- and Z-silyl enol ethers 4 derived from allyl 3-R-3-dimethyl(phenyl)silylpropanoate (R = Me, Pr(i) and Ph) and the Z-silyl enol ethers 7 derived from 4-R-4-dimethyl(phenyl)silylbut-2-enyl acetate (R = Me and Pr(i)) undergo Ireland-Claisen rearrangements largely in the same stereochemical sense, with C-C bond formation taking place anti to the silyl group in the conformations 22, 23 and 24 in which the hydrogen atom on the stereogenic centre is inside, more or less eclipsing the double bond. The E-silyl enol ether E-7a derived from 4-methyl-4-dimethyl(phenyl)silylbut-2-enyl acetate shows low diastereoselectivity in the alternative sense, probably because C-C bond formation takes place anti to the silyl group in the conformation 26 with the methyl group inside, but the silyl enol ether E-7b derived from 4-isopropyl-4-dimethyl(phenyl)silylbut-2-enyl acetate shows low diastereoselectivity in the normal sense. The E- and Z-silyl enol ethers 33 derived from cis-crotyl 3-phenyl-3-dimethyl(phenyl)silylpropanoate and the E-silyl enol ether 39 derived from trans-crotyl 3-phenyl-3-dimethyl(phenyl)silylpropanoate undergo Ireland-Claisen rearrangements largely in the same stereochemical sense as their allyl counterparts, but with moderately high levels of diastereocontrol in setting up the third stereogenic centre following from chair-like transition structures.     

Synthesis of 14-Bromo and 14-Hydroxy Baccatin III Derviatives

Numerous efforts towards synthesis of anticancer drug paclitaxel (Taxol(r), 1a) with improved activities led to the modification at 13-phenylisoserine side chain and different positions of its core structure-baccatin III 1c1. At the same time, the activities of searching new taxoids for starting materials of new semi-synthetic paclitaxel analogs from Taxus spp. plant have not ever been stopped. Among these taxoids, 14?-hydroxy-10-deacetylbaccatin III 22 and 13-acetyl-9-dihydrobaccatin III …